Reverse Osmosis

RO

Condition: used, machine/vehicle number: 11796, Rotor diameter: 250 mm Rotor width: Rotor blade: 3 Djdpfxeyr Ttys Aktekn Stator knife: 4 Inlet cross-section approx. 250 x140 Drive motor: 5.5 kW

Condition: new, Year of construction: 2026, Cut-to-length and mitre saw type: ZS 200 N - 5 KW motor with machine stand, Machine via handwheel and worm gear (rear) Tiltable Saw blade diameter 520 mm, saw blade mounting hole 50 mm Saw blade speed: 2800 rpm 400 volt / 5 KW (S6/40%) motor with brake and automat. Star delta motor control Cutting width at 90 degrees: 420 mm Cutting width at 45 degrees: swiveled: 295 mm Cutting height at 90 degrees: 200 mm Cutting height at 45 degrees inclined: 140 mm Saw can be swiveled on one side up to approx. 25 degrees to an acute angle and tilted flat to the left up to 30 degrees Carbide circular saw blade 520x4.0/2.8 x 50 mm 60 WZ neg. for wood RLH-ST60 6.0 mtr. measuring length, mounting side: left Cross-cut fence / roller conveyor, heavy-duty design, Stop slide adjustable from the workstation via handwheel, electronic-digital dimension display, pneumatic clamping of stop slider, stop flap folds backwards, with steel rollers 60 mm diameter, roller spacing 200 mm, 400 mm roller width, with 4 support feet and connection piece: overall length: 6.7 mtr. Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Powerful dark red LED display. Higher accuracy than the battery-powered crystal display RO-ST60 4.0 m long feed roller conveyor Mounting side: Right Dsdsk H Ic Uspfx Aktekn Heavy-duty design, steel rollers: 60 mm Diameter, roller spacing: 200 mm 400 mm roller width, 3 support feet and connection piece Location: From stock 54634 Bitburg - immediately available - Picture: similar. Machine is still in original packaging

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 901455, We offer this used Robbi RO 55-A drilling center, manufactured in 2000. Voltage: 380 V Dkedpsza Uakjfx Akten Frequency: 50 Hz Serial number: 901455 If you have any further questions or require more information, please feel free to send us a message or call us.

Condition: good (used), Manufacturer: MOSCA, Model: RO-M-P2, Year of manufacture: 1997, Serial No.: 46957 Dsdpfoy Ez Tiex Aktjkn

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, working width: 1,100 mm, Fully functional, with extra new sanding brush attachments; the workpiece is guided through the machine via two belts. Dodpozaapdefx Aktekn

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, type of input current: AC, input voltage: 230 V, input current: 2 A, input frequency: 50 Hz, power: 0.48 kW (0.65 HP), For sale is a Mosca strapping machine P-5, year of manufacture 2006, suitable for bundling newspapers, magazines, or shipping cartons. The machine has seen very little use and was stored for 6 years in between. The strapping cycle is triggered manually via foot pedal. Strapping band width: 5 mm, cycle speed: 50 to 55 strapping cycles per minute, automatic band threading and strap end ejection, electronic tension adjustment via potentiometer, and a soft tension button. The machine has been fully overhauled and is in very good condition. Frame size: 600 x 500 mm. Video available on request. Djdpfxsy Ew N Tj Aktjkn Inspection and test run can be arranged by appointment. Free delivery within 200 km around Vienna. We can secure and pack the machine on a pallet for transport by freight carrier or for self-collection. Model: RO-M-P5 Serial Number: 87878 Power configuration: 1L~N~PE Voltage: 230 V Current type: AC Power: 0.48 kW Frequency: 50 Hz Current: 2.6 A Year of manufacture: 2007 Control voltage: V Control current type: DC If you have any questions or need more information, feel free to send us a message or call us.

Condition: good (used), functionality: fully functional, power: 11.03 kW (15.00 HP), 3000 mm cutting length – separating cut – blade diameter 500 mm – cutting height 170 mm Dkedpfx Aksy U Dubjtjn

Condition: not inspected (used), Year of construction: 1965, functionality: unexamined, machine/vehicle number: 80-0117-2582, spindle speed (max.): 5,000 rpm, This Heidenreich and Harbeck VDF 21R0 lathe with accessories will be auctioned off in our online auction "Zink Feinmechanik-Sondermaschinen GmbH - CNC machining centers - tool holders - tools - workshop equipment". Dkedpfsy Uvl Esx Akton You can find this and many other items from the field of precision engineering machinery, workshop equipment, CNC technology, CNC accessories, tool holders, and more on our RESTLOS auction platform!

Condition: excellent (used), Year of construction: 1972, Precision lathe, lathe, lead screw lathe, lead screw lathe Dodpfx Aow Sxgxsktjkn -Manufacturer: VDF Heidenreich Harbeck, lead screw and feed screw lathe type 24R0 -Machine bed: hardened -Turning length: 1230 mm -Rotation diameter over bed: 500 -Turning diameter over support: 290 mm -Spindle bore: Ø 56 mm -Spindle speeds: 19 - 2000 rpm -Wedge bar chuck: Forkardt Ø 250 mm -Tailstock mount: MK4 -Drive: 5.5 kW -Accessories: 1x bezel, 7x Multifix tool holders, see photos -Dimensions: 1180/3050/H1345 mm -Weight: 1907 kg

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Mosca Fusion strapping machine, arch 600 x 500 mm, 5 mm strap, throughput 50 to 55 cycles per minute, automatic strap feeding and ejection, electronic tension adjustment via potentiometer. Machines are fully overhauled. Also available: Mosca ROM P5 strapping machines with 600 x 500 or 500 x 400 mm arches and Mosca ROM P4 with 500 x 400 mm arch from 2004. Dsdpjyxmzlefx Aktekn