Other

Seppi M. BMS 125 / 13-30t Forstmulcher Drehmotor

Year of construction: 2023, Condition: new, Seppi M. BMS 125 forestry mulcher / NEW / in stock & immediately available Price: 29.890,00 ¤ net / 35.569,10 ¤ gross - Working width: 1.25 m - Overall width: 1.56 m - Depth: 1.11 m - Height: 0.85 m - Mulcher for excavator attachment - Ideal for mulching in hard-to-reach areas such as traffic routes, riverbanks, steep slopes, or for cleaning gas and power lines - mulches bushes and wood up to 30 cm Ø - for excavators from 13 to 30 t - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device D8Knm2Pfn - Indirect V-belt drive with 5 V-belts - Reinforced double-walled housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable rear hood - Continuous hinge over the entire length of the hood - Front guard with chains - Rear guard with chains - Support skids in sandwich construction, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 468 rotor with fixed tools with tungsten carbide inserts - 1 x MONO EXTREME V-LOCK L, ET number 19702266 - 33 x MONO TIP V-LOCK, ET number 19702259 - 1 x MONO EXTREME V-LOCK R, ET number 19702267 - Wear-resistant tool holder - Replaceable rotor shaft stubs OPT 465 M-BOOST bent-axis piston motor - with automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required hydraulic pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 80 - 170 l/min 3 hydraulic lines are required: Flow, return and drainage. The device is supplied without hoses, connections and mounting plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Condition: new, Machine/vehicle number: bmsf125d, Seppi M. BMS-F 125 mulcher / NEW / in stock & immediately available Price: 26.190,00 ¤ net / 31.166,10 ¤ gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 780 kg - Mulcher for excavator cultivation, for mulching along riverbanks, in forests, along railroad lines and other hard-to-reach areas - Mulches bushes and wood up to 20 cm Ø - for excavators from 10-20 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Mechanically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains 8R3Vpyuycq -Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 rotor with fixed MINI DUO tools (2 hard metal plates) - 27 pieces, ET number 176.02.005 OPT 465 M-BOOST bent-axis piston motor - with automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 339 hydraulically adjustable hood - A double-acting hydraulic connection is required OPT 372 hydraulic 190° turning device OPT 158 hydraulically adjustable hood - 24V solenoid valve for opening the rear hood 3 hydraulic lines are required for the rotor: Flow, return and drain oil. An additional hydraulic circuit is required for the hood. The device is supplied without hoses and connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Condition: new, Machine/vehicle number: bmsf125, Seppi M. BMS-F 125 mulcher / NEW / in stock & immediately available Price: 21.390,00 ¤ net / 25.454,10 ¤ gross Working width: 125 cm Overall width: 153 cm Depth: 105 cm Height: 72 cm Weight: 667 kg - Mulcher for excavator cultivation, for mulching along riverbanks, in forests, along railroad lines and other hard-to-reach areas - Mulches bushes and wood up to 20 cm Ø - for excavators from 10-20 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts Djt3Fr - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Mechanically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains -Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 rotor with fixed MINI DUO tools (2 hard metal plates) - 27 pieces, ET number 176.02.005 OPT 465 M-BOOST bent-axis piston motor - with automatic displacement control 60-80 cm³ and pressure relief valve - Displacement in cm³ (min-max): 60 - 80 - Required pressure in bar (min-max): 200 - 350 - Required hydraulic flow rate: 100 - 150 l/min OPT 339 hydraulically adjustable hood - A double-acting hydraulic connection is required Intermediate adapter for BE435 Z1 - approx. 200 mm high 3 hydraulic lines are required for the rotor: Flow, return and drain oil. An additional hydraulic circuit is required for the hood. The device is supplied without hoses and connections. Adapter plates available. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Condition: new, Machine/vehicle number: mini-bms 105 drehmotor, Seppi M. MINI-BMS 105 / 5-10to / forestry mulcher / CUT CONTROL / rotary motor / NEW / in stock & immediately available Price: ¤ 20,590.00 net / ¤ 24,502.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator cultivation - For mulching along river banks, in forests and other hard-to-reach areas - mulches bushes and shrubs up to 10 cm Ø - for excavators from 5-10 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Hydaulically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve -Displacement in cm³ (min-max): 29 - 58 -Required hydraulic pressure in bar (min-max): 150 - 250 -Required hydraulic flow rate in l/min (min-max): 60 ? 130 OPT372 hydraulic 190° turning device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. screws and assembly = ¤ 880.00 net An autonomous hydraulic system is recommended for the drive. 3 hydr. lines are required: Flow, return and drainage. An additional double-acting hydraulic connection is required for the hydraulic hood. The device is supplied without hoses, connections and mounting plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Cb9Myjg Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: used, Seppi M. MINI-BMS 105 / 5-10to / Forestry mulcher / CUT CONTROL / DEMO ? machine / year of manufacture: 2023 / in stock & immediately available Price: ¤ 14,090.00 net / ¤ 16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator cultivation - For mulching along river banks, in forests and other hard-to-reach areas - mulches bushes and shrubs up to 10 cm Ø - for excavators from 5-10 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Hydaulically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg Isundbq OPT 513 CUT CONROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - approx. 200 mm high Optional: MS08 adapter plate incl. screws and assembly = ¤ 1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. An autonomous hydraulic system is recommended for the drive. 3 hydr. lines are required: Flow, return and drainage. A double-acting hydraulic connection is also required for the hydraulic hood. hydraulic connection is also required. The device is supplied without hoses, connections and mounting plate. We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker sales and service partner, DMS sales and service partner, Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale! Internal no.: 170048

Condition: new, Machine/vehicle number: hsmob125d, Seppi M. H-SMO-B 125 mulcher / rotary engine / Vario Flow / NEW / in stock & immediately available Price: 15.590,00 ¤ net / 18.552,10 ¤ gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm - Powerful and maneuverable device for attachment to excavators or tracked vehicles, ideal for maintaining embankments and fallow land - mulches grass and light shrubbery up to 7 cm Ø - for excavators from 5 to 13 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 4 V-belts - drop-forged counter blades - Double-walled housing made of high-strength steel - Adjustable discharge hood, with rubber protection at the rear - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm - wall thickness of the rotor: 12.5 mm - Front guard with chains - Color: red RAL3020 - anthracite RAL7021 OPT 371 Rotor with SMO beater (standard) - 12 pieces, ET number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 120 OPT 099 Floating attachment (parallelogram guide) OPT 372 Hydraulic 190° turning device Optional: MS08 adapter plate incl. screws and assembly = ¤ 880.00 net 3 hydraulic lines are required: Flow, return and drain oil. The device is supplied without hoses and connections. Djy3Fh Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: used, Seppi M. MINI-BMS 105 / 5-10to / forestry mulcher / CUT CONTROL / DEMO machine / rotary engine / year of manufacture: 2023 / in stock & immediately available Price: ¤ 18,990.00 net / ¤ 22,598.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator cultivation - For mulching along river banks, in forests and other hard-to-reach areas - mulches bushes and shrubs up to 10 cm Ø - for excavators from 5-10 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Hydaulically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL Blokq0C22Rm - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 ? 130 OPT372 hydraulic 190° turning device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. screws and assembly = ¤ 880.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. An autonomous hydraulic system is recommended for the drive. 3 hydr. lines are required: Flow, return and drainage. An additional double-acting hydraulic connection is required for the hydraulic hood. The device is supplied without hoses, connections and mounting plate. We are an official Seppi M. sales and service partner and also represent the brands Westtech Woodcracker sales and service partner, DMS sales and service partner, Magni telescopic handler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale! Internal no.: 170068

Year of construction: 2023, Condition: new, Seppi M. MINI-BMS 105 / 5-10to / forestry mulcher / CUT CONTROL / NEW / in stock & immediately available Price: 15.790,00 ¤ net / 18.790,10 ¤ gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator cultivation - For mulching along river banks, in forests and other hard-to-reach areas - mulches bushes and shrubs up to 10 cm Ø - for excavators from 5-10 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - drop-forged counter blades - Hydaulically adjustable hood - Continuous hinge over the entire length of the hood - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a hard metal plate - Color: red RAL3020 - anthracite RAL7021 OPT 228 forestry rotor with fixed MINI DUO tools (2 carbide plates) - 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 ? 130 Intermediate adapter for BE314 Z1 - approx. 200 mm high - not applicable for OPT 372 hydr. 190° turning device Optional: MS08 adapter plate incl. screws and assembly = ¤ 1,410.00 net An autonomous hydr. system is recommended for the drive. 3 hydr. lines are required: Flow, return and drainage. An additional double-acting hydraulic connection is required for the hydraulic hood. The device is supplied without hoses, connections and mounting plate. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. Mmzcbdf We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: new, Seppi M. SMO avs 200 / forestry mulcher / 50 to 120 hp / NEW / in stock & immediately available Price: 15.790,00 ¤ net / 18.790,10 ¤ gross - Working width: 2.00 m - Overall width: 2.45 m - Depth: 1.90 m - Height: 1.10 m - Weight: 940 kg - kW (min - max): 37 - 89 - HP (min - max): 50 - 120 - mulches grass and brushwood up to 7 cm Ø - Working speed 1-5 km/h - ISO 3-point linkage category II, for rear mounting - Hydraulic laying out from +90° to -50 - Hydraulic side shift - Simple drive - 4 V-belts - drop-forged counter blades - double-walled housing made of high-strength S420 steel - adjustable discharge hood, rear with rubber protection - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm - Wall thickness of the rotor: 12.5 mm - Color: red RAL3020 - anthracite RAL7021 - Required hydraulic control units: 2 double-acting OPT 371 Rotor with SMO flail (standard) - 21 pieces, ET number 130.02.001 OPT 019 Gearbox 540 rpm with freewheel (standard) - Drive shaft 1 3/8" Z=6 OPT 025 Front guard with chains OPT 006 Additional front rubber guard OPT 414 Attachment with collision protection FLEX SAFE TM PTO SHAFT DOUBLE WIDE ANGLE - Walterscheid WWZ 2480 with star profile S4-S5 Connection fork on tractor side: 1 3/8 Z6 with pull lock Connection fork on implement side: 1 3/8 Z6 with clamping cone pin Length center cross to center cross: 1610 mm We have a very large selection of different Seppi M. products in our warehouse, which are available immediately! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. Ruyrjtza We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: new, Seppi M. S9 dyna 300 / forestry mulcher / 100 to 220 hp / NEW / in stock & immediately available Price: 16.590,00 ¤ net / 19.742,10 ¤ gross - Working width: 3.00 m - Overall width: 3.15 m - Depth: 1.27 m - Height: 1.30 m - Weight: 1,280 kg - kW (min - max): 74 - 161 - PS (min - max): 100 - 220 - mulches grass and brushwood up to 9 cm Ø - Working speed 3-10 km/h - Innovative, pyramid-shaped and particularly stable ISO 3-point linkage category II, for front and rear - Linear hydraulic side shift - Simple drive - 5 V-belts - Reinforced V-belt guard - double-walled housing made of high-strength S420 steel - Housing with replaceable wear plates - replaceable drop-forged counter blades - Easily adjustable discharge hood with rubber protection - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm Bhkmrvkpcej - Wall thickness of the rotor: 16 mm - Color: red RAL3020 - anthracite RAL7021 OPT 371 Rotor with SMO beater (standard) - 30 pieces, ET number 130.02.001 OPT 018 Gearbox 1000 rpm with freewheel and through drive (standard) - Drive shaft 1 3/8" Z=6 OPT 025 Front guard with chains (standard) OPT 454 Attachment with two upper suspension points PTO shaft W2500 - Walterscheid W 2500 with star profile S4-S5 Connection fork on tractor side: 1 3/8 Z6 with pull lock Connection fork on implement side: 1 3/8 Z6 with sliding pin Length center cross to center cross: 1010 mm We have a very large selection of different Seppi M. products in our warehouse, which are available immediately! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: new, Seppi M. SMO 175 - Forestry mulcher / 50 to 100 hp / NEW / in stock & immediately available Price: 8.090,00 ¤ net / 9.627,10 ¤ gross - Working width: 1.75 m - Overall width: 1.90 m - Depth: 1.20 m - Height: 1.20 m - Weight: 550 kg - kW (min - max): 37 - 74 - HP (min - max): 50 - 100 - mulches grass and brushwood up to 7 cm Ø - Working speed 3-10 km - ISO 3-point linkage category I and II, for rear mounting - Manual parallelogram side shift - Simple drive - 4 V-belts - drop-forged counter blades - double-walled housing made of high-strength S420 steel - Adjustable discharge hood, rear with rubber protection - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm - Wall thickness of the rotor: 12.5 mm - Color: red RAL3020 - anthracite RAL7021 OPT 371 Rotor with SMO beater (standard) - 18 pieces, ET number 130.02.001 OPT 019 Gearbox 540 rpm with freewheel and through-drive (standard) - Drive shaft 1 3/8" Z=6 OPT 025 Front guard with chains OPT 046 Hydraulic parallelogram side shift PTO shaft W2400 - Walterscheid W 2400 Connection fork on tractor side: 1 3/8 Z6 with pull lock Connection fork on implement side: 1 3/8 Z6 with sliding pin Length center cross to center cross: 1010 mm We have a very large selection of different Seppi M. products in our warehouse, which are available immediately! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. Djjckbdup We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Year of construction: 2023, Condition: new, Seppi M. MINIFORST / forestry mulcher / 60 - 100 hp / NEW / in stock & immediately available Price: 19.890,00 ¤ net / 23.669,10 ¤ gross - Working width: 2.00 m - Overall width: 2.24 m - Depth: 1.15 m - Height: 1.10 m - Weight: 1,095 kg - kW (min - max): 44 - 74 - HP (min - max): 60 - 100 - mulches bushes and shrubs up to 20 cm Ø - Working speed 0-5 km/h - Central fixed ISO 3-point rear attachment category II - Continuous hinge over the entire length of the hood - Reinforced double-walled housing - Three rows of hardened counter blades - Simple drive - 5 V-belts - hydraulically adjustable hood - Support skids, height-adjustable by 2.5 cm, reinforced with a hard metal plate - Front and rear protection: double chains - Color: red RAL3020 - anthracite RAL7021 OPT 228 rotor with fixed tools with tungsten carbide inserts, Wear-resistant tool holder (standard) - 36 x MINI-DUO ,ET number 17602005 OPT 018 Gearbox 1000 rpm with freewheel and through drive (standard) - Drive shaft 1 3/8" Z=6 OPT 014 - Mechanical pusher device Cardan shaft W2500 - Walterscheid W 2500 with star profile S4-S5 Connection fork on tractor side: 1 3/8 Z6 with pull lock Connection fork on implement side: 1 3/8 Z6 with sliding pin Length center cross to center cross: 1010 mm We have a very large selection of different Seppi M. products in our warehouse, which are available immediately! Cma2Wa2New Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale!

Condition: new, Machine/vehicle number: hsmob125, Seppi M. H-SMO-B 125 mulcher / NEW / in stock & immediately available Price: 11.790,00 ¤ net / 14.030,10 ¤ gross Working width: 125 cm Overall width: 140 cm Depth: 120 cm Height: 60 cm Weight: 380 kg Support roller: 152 mm V-belt: 4 - Powerful and maneuverable device for attachment to excavators or tracked vehicles, ideal for maintaining embankments and fallow land - mulches grass and light shrubbery up to 7 cm Ø - for excavators from 5 to 13 tons - for mounting on various attachment plates - Drive intended for hydraulic motor depending on the flow rate of the carrier device - Indirect V-belt drive with 4 V-belts - drop-forged counter blades - Double-walled housing made of high-strength steel - Adjustable discharge hood, with rubber protection at the rear - Reinforced support roller with double tapered roller bearings, height-adjustable by 5 cm - wall thickness of the rotor: 12.5 mm - Front guard with chains - Color: red RAL3020 - anthracite RAL7021 OPT 371 Rotor with SMO beater (standard) - 12 pieces, ET number 130.02.001 OPT 291 VARIO FLOW - Axial piston hydraulic motor with variable displacement 29-58 cm³ and pressure relief valve - displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 120 OPT 099 Floating attachment (parallelogram guide) Optional: MS08 adapter plate incl. screws and assembly = ¤ 750.00 net 3 hydraulic lines are required: Flow, return and drain oil. The device is supplied without hoses and connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. In our warehouse we have a very large selection of different products from Seppi M., which are immediately available! Simply contact us at . We will also be happy to make you a financing offer on request. We are an official Seppi M. sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. program for you! Subject to errors and prior sale! Dmirfb

Mileage: 131,100 km, Power: 92 kW (125.09 HP), First registration: 04/1993, Overall weight: 7,500 kg, Fuel type: diesel, Axe configuration: 2 axles, Gearing type: mechanical, Condition: used, Equipment: Crane, Well-maintained Unimog U1250 with a Hiab 090 crane with 2x hydraulic extensions, 1x mechanical and a maximum working height of 12 meters and a preparation for 5th + 6th control circuit (e.g. for grapple, bucket) in very good condition * Hiab 090 * 2x hydraulic extensions * Working height 12 m * Lateral outreach * 1,80 m ? 4,500 kg * 3,50 m ? 2,400 kg * 7.00 m ? 1.170 kg * Mechanical extensions * 9,00 m ? 700 kg * 10,80 m ? 500 kg (optional at extra charge) * 12.20 m - 360 kg (optional at extra charge) * Additional control circuit on the crane for e.g. grapple, rotary servo etc. * 4x outriggers * 3 seater * All-wheel drive with diff locks * Trailer coupling * Reversing gearbox 8 V + 8 R gears * Air driver's seat * Additional front hydraulics * Auxiliary hydraulics rear * PTO front * Green sticker possible Dpfyuj * H license plate possible * Registration as self-propelled working machine possible * Or as LOF registration possible * Total mileage 131,853 km * With 10,600 operating hours * Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Mileage: 131,853 km, Power: 92 kW (125.09 HP), First registration: 04/1993, Overall weight: 7,490 kg, Gearing type: mechanical, Condition: used, Number of seats: 3, Equipment: Crane, Well-maintained Unimog U1250 with a Hiab 090 crane with 2x hydraulic extensions, 1x mechanical and a maximum working height of 12 meters and a preparation for 5th + 6th control circuit (e.g. for grapple, bucket) in very good condition * Hiab 090 * 2x hydraulic extensions * Working height 12 m * Lateral outreach * 1,80 m ? 4,500 kg * 3,50 m ? 2,400 kg * 7.00 m ? 1.170 kg * Mechanical extensions * 9,00 m ? 700 kg * 10,80 m ? 500 kg (optional at extra charge) * 12.20 m - 360 kg (optional at extra charge) * Additional control circuit on the crane for rotary servo, grapple * 4x outriggers * 3 seater * All-wheel drive with diff locks * Trailer coupling Dpfytv * Reversing gearbox 8 V + 8 R gears * Air driver's seat * Additional front hydraulics * Auxiliary hydraulics rear * PTO front * Green sticker possible * H license plate possible * Registration as self-propelled working machine possible * Or as LOF registration possible * Total mileage 131,853 km * With 10,600 operating hours * Financing available through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessories without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Condition: used, Electronics cables, extension cables, electronics cables -Manufacturer: Draka Comteq, data cable -Type: UC2000 B_A 4G50/125 FRNC Bngzxht8Fm -Length: 130 m -Price: complete -Dimensions roll: Ø 500/330 mm -Weight: 20 kg

Condition: new, neu ca. 12 Wochen ab Auftrags Türkei 7100 € 146.97 € 1250 kg Cy0Mktfbx3 1300 mm 450 - 550 mm 400 mm 50 mm 80 mm motorized drive mechanical adjustable coil mandrel with 4 jaws speed control for decoiling speed aswell as acceleration- and deceleration times photoelectric proximity ensor SICK for sag control Option: pneumaticdownholder (CMC P3 1250 400 M D1300) € 2.200,--

Condition: new, Rexroth M-3 SED 6 CK13/350 C G24 N9K73 L Seat valve R901257167 ,unused, 100% functional, scope of delivery acc. to photos Cj77Cbgvno

Condition: used, Year of construction: 1998, Construction height: 510 mm, Load capacity: 2,200 kg, Construction width: 1,200 mm, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Technical condition: good Description: ISO 3A (51 cm) Capacity 2200 kg Opening range 560-2010 mm Forks 1200 mm Width 1200 mm Year 1998 mm Dpjt9F

Mileage: 930,993 km, Power: 397 kW (539.77 HP), First registration: 05/2012, Fuel type: diesel, Color: white, Driver cabin: sleeper cab, Emission class: euro5, Suspension: steel-air, Year of construction: 2012, Condition: used, Equipment: Abs, Air Conditioning, Weitere Optionen und Zubehör Aluminum-Kraftstofftank, Electric Fensterheber, Electrically adjustable Außenspiegel, Geschwindigkeitsbegrenzer, Radio/CD-Spieler, Radio/Kassettenspieler, Schlafkabine, Sonnenschutzklappe, Zapfwelle (PTO) Fzjg23G Anmerkungen YV2AG40D6VB611496 Further Information AdBlue-System, Konstruktionsjahr: 2012, Kabine: Schlafkabine, Allgemeiner Zustand: sehr gut, Technischer Zustand: sehr gut, Optischer Zustand: sehr gut, Keine Schäden Company information If you have any questions or suggestions, Don't hesitate to contact us. We guarantee an answer within 8 hours. Prices are without VAT. No rights could be derived from given information. Office Phone: MOB: Dutch - English - Deutsch - Francais - Español - Italiano)Available on What's App and Viber. MOB: Dutch)Available on What's App and Viber. When you pay by bank transfer, the money needs to be tranfered to our Bank Account underneath. Always check the payment details that are stated on our website. In case you have received other information please contact us. In case you have doubts please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO 0174 3347 10 EORI/BTW/TAX: NL81057401B(01) BIC/SWIFT: RABONL2U

Mileage: 156,018 km, Power: 96 kW (130.52 HP), Axe configuration: 4x2, Year of construction: 2019, Condition: used, Colour: Unknown Field of application: Freight transport Bmh9Nwm7B9Y GVW: 3.500 kg Please contact Emal Jaweed for more information

Condition: excellent (used), Insert face milling cutter ( 28233) Mxg3A8 type Gigacut AW 125-13-8 diameter 125 mm mounting hole 40 mm weight 2,5 kg

Mileage: 190,447 km, Power: 112 kW (152.28 HP), First registration: 10/2000, Overall weight: 7,490 kg, Fuel type: diesel, Condition: used, Equipment: Crane, Well-maintained Mercedes Atego 815 with a Palfinger PK 7000 crane with 2x hydraulic and 2x mechanical extensions and a working height of 13 m. German vehicle from 1st hand Palfinger PK 7000 Working height 13. m Max. 2,960 kg Lateral outreach 1,80 m ? 2,960 kg 3,40 m ? 1,790 kg 5.10 m - 1,160 kg 6.90 m - 870 kg 2x mechanical extensions 8,90 m ? 600 kg 10,90 m ? 370 kg Platform dimensions: L. 4,200 W. 2,450 NL at 7,490 kg = 1,970 kg NL at 8,600 kg = 3,080 kg Rockinger trailer coupling Towing capacity 10,500 kg Hu3P8Js Auxiliary heating German vehicle From 1st hand Diff lock Radio Roof hatch Financing possible through our partner banks, we will be happy to help you. We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessory details without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.

Mileage: 86,168 km, Power: 110 kW (149.56 HP), Fuel type: diesel, Gearing type: mechanical, Axe configuration: 4x2, Wheelbase: 4,300 mm, Overall weight: 4,600 kg, Empty load weight: 4,070 kg, Maximum load weight: 530 kg, First registration: 07/2010, Emission class: euro4, Color: orange, Driver cabin: day cab, Suspension: steel, Brakes: other, Number of seats: 2, Condition: used, Equipment: Abs, Airbag, Cabin, Central Locking, Head Guard, Onboard Computer, Parking Heater, Power Assisted Steering, * German vehicle * 1st hand * Condition, see photos * Blumenbecker aerial work platform * Type: HM13T Hubmeister * 13 meter working height * Lateral outreach 9.10 meters * Insulated work basket 1000 Volt * For 2 persons max. 200 kg * Workman basket with control panel * 4-compartment hydraulic outriggers * Various storage boxes on the loading area * Pre-warning spotlights * 6-speed manual gearbox * Parking heater * Reversing camera * Intercom system * Height-adjustable driver's seat with armrest * Height-adjustable front passenger seat with armrest * Airbag driver/passenger side * Electric windows * Electric mirrors * Central locking with remote control B9Qmve02S * Radio CD * ABS and ASR * Rotating beacons * Protective grille over cab * Leaf suspension * Twin-wheeled rear axle * Wheelbase: 4,300 mm * GVW: 4,600 kg * Unladen weight: 4,070 kg * Self-propelled work machine Lifting platform If new TÜV approval is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT new TÜV approval, without new DGUV, without new SP, without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Reference: We offer and strongly recommend a viewing and inspection of the goods to ensure that the buyer has no misconceptions about the condition and suitability of the goods. Inspections and tests are possible at any time by appointment and are expressly desired. All information is without guarantee. No liability is accepted for errors and incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to alterations, prior sale and errors excepted. - .

Mileage: 190,447 km, First registration: 10/2000, Overall weight: 8,600 kg, Gearing type: mechanical, Loading space width: 2,450 mm, Loading space length: 4,200 mm, Condition: used, Equipment: Crane, Well-maintained Mercedes Atego 915 with a Palfinger PK 7000 crane with 2x hydraulic and 2x mechanical extensions and a working height of 13 m. German vehicle from 1st hand Palfinger PK 7000 Working height 13. m Max. 2,960 kg Lateral outreach 1,80 m ? 2,960 kg 3,40 m ? 1,790 kg 5.10 m - 1,160 kg 6.90 m - 870 kg 2x mechanical extensions 8,90 m ? 600 kg 10,90 m ? 370 kg Platform dimensions: L. 4,200 W. 2,450 NL at 7,490 kg = 1,970 kg NL at 8,600 kg = 3,080 kg Rockinger trailer coupling Towing capacity 10,500 kg Auxiliary heating German vehicle From 1st hand Diff lock Radio Roof hatch Financing possible through our partner banks, we will be happy to help you. Ulsgvx77Bn We expressly reserve the right to prior sale, as we also offer this item on other portals. Accessory details without guarantee. Subject to alterations, prior sale or errors excepted. We offer and strongly recommend a viewing and inspection to ensure that the buyer has no misconceptions about the condition and suitability of the item. Viewings and inspections are possible at any time by appointment and are expressly desired.