Pistons 2 pieces Ø 180 mm

Mahle 200L2

Condition: good (used), DF separator, fine oil separator, air-oil separator, compressed air filter, filter cartridge, fine filter, filter, pre-filter, intake air filter, air filter housing, air filter housing, generator air filter -Manufacturer: Mahle Air Oil Separator Filter Type 852 631 -Inside/outside: Ø 120/170 mm -Quantity: 1x air filter available -Dimensions: Ø 200 x 610 mm Kljlhcdewbz Daewxor -Weight: 4.2 kg

Condition: like new (used), Year of construction: 1991, Functionality: fully functional, machine/vehicle number: 907445, pressure (max.): 10 bar, Screw compressor Brand: Mahle Model: MSK D30 Year: 1991 NO.: 907445 Characteristics: Version: 4.2/10/AF Volumetric flow rate: 4,2 m³/min Motor power: 30 kW Klolhcorn Symedwxsr Pressure: 10 bar Speed: 1,450 rpm

Condition: good (used), Old but well preserved. Klelhouyaacscdwxjr

Condition: used, New filtering inserts from different Manufacturers! More info and price upon inquiry! small overview: Argo P3.0520-00, Argo P2.0920-02, Argo P3.0712-01, Argo AS010-00 Kolhcdegd Uxfowxjlr Argo P3.0613-52, Argo V3.0510-08, Argo AS040-01 Mahle LX 162, Mahle MIC 25 NBR, Mahle Mic VST 10 NBR Mahle PI 23006 RN, Mahle PI 1105 MIC 10, Mahle PI 2105 SM3 Mahle SMX 10 NBR, Mahle 852 127 MIC VST 10 NBR, Mahle 852 125 SMX VST 25 NBR, Mahle PI 15004 RN MIC 25 Mahle PI 3130 SMX 10, Mahle KC 6, Mahle OC 58 Hydac 0160 D 100 W/HC R005, Hydac 0160 R005 BN/HC 2, Hydac 0160 R005 BN

Year of construction: 1983, Condition: used, power capacity 7,5 kW feed pressure 10 bar Kelhsfhd Abecdwxolr weight of the machine ca. 300 kg

Condition: ready for operation (used), Year of construction: 1995, operating hours: 48,600 h, power: 37 kW (50.31 HP), volume flow: 4.9 m³/h, pressure: 10 bar, Mahle Screw Compressor, Screw Compressor, Compressor; Mahle MSK D37, 37 kW Screw Compressor, Used Machine Manufacturer: Mahle Type: MSK D37 Year: 1995 Kslhcdjq Nmpvowxslr Dimensions: 1480 x 845 x 1010 mm Operating Hours: 48,600 Maximum Operating Pressure: 10 Bar Power: 37 kW Delivery Quantity: 4900 l/min; 4.9 m3/h

Condition: used, Three-phase motor, electric motor -Power: 45 kW -Speed: 2940 rpm -Shaft: Ø 55 mm -Construction: B3 Kolhecnf E Rjcdwxjlr -Protection class: IP 54 -Dimensions: 750/380/H490 mm -Weight: 287 kg

Condition: refurbished (used), Roller hearth furnace, make Mahler type: RHEE 500/100/3000-6500 refurbished: 2016 max. charge weight: 40 kg/m nominal throughput: 288 kg/h clear roll width: 500 mm clear height above roll: 100 mm furnace length: approx. 22100 mm working temperature: - Warm-up zone: 800-1000°C - High temperature zone 800-1250°C heating: electric connected load: 400 kW gases used: nitrogen, hydrogen Klslhofc Hbdecdwxsr

Year of construction: 1994, Condition: used, Protective gas conveyor belt furnace Working space: 450 mm wide, 110 mm high Electrical connection values: 3 x 400 volts, 50 hertz Heating: electric, heating coils, semiconductor relay "on/off", 100 kW, capacity: approx. 200 kg / h Working temperature: max. 1100° C Heating zones: 6 Belt construction: mesh belt made of high-temperature-resistant steel, width approx. 450 mm Cooling zones: cooling zone 1 approx. 1.4 m, cooling zone 2 approx. 3.0 m, cooling zone 3 approx. 4.5 m Cooling zones made of normal sheet steel (St 37) as double-walled circulation cooling sections with measuring gas extraction nozzles Protective gas: nitrogen N2, hydrogen H2 Dimensions: heated length (6 zones) approx. 3500 mm, furnace length approx. 4600 mm, feed table approx. 5280 mm, removal table approx. 1500 mm, total width approx. 1800 mm, total height approx. 2100 mm, total length approx. 23 m No gas table included. Ksljv Ipcxjhcdwxslr

Condition: excellent (used), TECHNICAL DATA Kjlhogi Dv Djcdwxjlr This furnace system is for recrystallization, normalization, soft annealing, stress relief, annealing and conditionally suitable for soldering. belt width: 1000 mm working height: 300 mm (over belt) heated length: 4250 mm electrical heating power: 300 kW heating zones: 4 heating temperature: 900 – 1120°C belt speed: 6 – 60 m/h (continuously adjustable) nominal connected load: 310 kW natural gas consumption: 50 Nm3/h natural gas pressure: 30 – 50 mbar nitrogen consumption: 70 Nm3/h – on purging nitrogen pressure: 100 mbar emergency cooling water pressure: 4-6 bar furnace length: 25298 mm furnace width: 2200 mm furnace height: 2800 mm exhaust gas quantity: 1200 m3 / h

Condition: used, Three-phase motor, electric motor -Power: 30 kW -Speed: 2955 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece Kelhcocutaxjdwxolr -Dimensions: 810/540/H405 mm -Weight: 264 kg

Condition: new, Type: S 200 l 2P Complete stainless steel Hopper capacity 200 liter Double working shafts with paddles Rotation of shafts in both directions Protection cover Two motors and two gears, transmission chain Electric power: 1.5 kW + 1.5 kW Voltage: 380 V / 50 Hz Discharging: 2 flaps Installation dimensions of machine in cm: Width: 120 Lenght: 65 Height: 100 Kelhcdwohd U Taoxolr Delivery time: after advanced payment, one working day

Year of construction: 2018, Condition: used, New: No Field of application: Construction Please contact ATS Norway AS for more information Please provide reference number upon request: 17964 Kjlhcdwsvgzlisxelr Description: Mahler's plow with lateral displacement. 2018 model. Own weight: 1600 kg. Width: 370cm. Parallelogram included. Ready for delivery. Total Weight: 1600 Width: 370

Condition: ready for operation (used), Year of construction: 2000, Functionality: fully functional, We offer Atlas Copco compressors Kjlhcdwewa Iz Aoxolr TYPE GA 55 Pressure 10 bar Motor 55 kW Year 2000 Compressor with documentation We also have other compressors from Atlas Copco, Kaeser, and Mahle

Condition: used, Year of construction: 2008, machine/vehicle number: 5X1005, 5-axis machining center SECOND-HAND MACHINE Commissioning November 2009 EUMACH HSM 5X-C Manufacturer:Eumach Year of construction:2008 5-axis machining center 11667 spindle running hours Spindle was replaced in March 2017 Travels X- Y -Z mm 1.100 - 610 - 810 CNC rotary table 610 mm NC-controlled milling head B-axis degrees +30/-120 Spindle speed: min-1 14,000 Double gripper with tool magazine Number 32 Central lubrication Switch cabinet Telescopic covers Water cooler Heidenhain scales in all axes Chip conveyor in shaving belt design in X-axis Coolant device Work lamp Machine cladding Machine manuals including options: Tool magazine 40-fold internal coolant supply 40 bar with MAHLE filter Kslhcdor A Dqkswxslr HEIDENHAIN CollisionMonitoring M & H infrared probe Operating mode 2 The machine can be inspected at any time. Please note that the machine is sold without tools and clamping devices.

Condition: good (used), Year of construction: 2008, operating hours: 11,667 h, Functionality: fully functional, machine/vehicle number: 5X1005, travel distance X-axis: 1,100 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 14,000 rpm, swivel angle B-axis (min.): -120 °, swivel angle B-axis (max.): 30 °, swivel angle C-axis (max.): 360 °, TECHNICAL DETAILS Commissioning: November 2009 Travel paths X - Y - Z: 1,100 - 610 - 810 mm CNC rotary table: 610 mm NC controlled milling head (B-axis): +30° / -120° Spindle Spindle speed: 14,000 rpm Double gripper with tool magazine: 40-way Internal coolant supply: 40 bar with MAHLE filter HEIDENHAIN CollisionMonitoring: yes M & H infrared measuring probe: yes Operating mode: 2 MACHINE DETAILS Spindle running hours: 11,668 h Switch-on time: 31,053 h Control switch-on time: 42,230 h Spindle replacement: March 2017 Weight: 7.5 t Connected load: 75 kVA Kljlhcsv Ew T Hodwxsr EQUIPMENT - Central lubrication - Control cabinet - Telescopic covers - Water cooler - Heidenhain scales in all axes - Chip conveyor: hinged belt design in X-axis - Coolant system - Work lamp - Machine cover - Machine manuals - HEIDENHAIN CollisionMonitoring - M & H infrared measuring probe - 40-way tool magazine - Internal coolant supply with 40 bar MAHLE filter - Chip conveyor in hinged belt design Any visible vices, tool holders and chucks are not part of the scope of delivery!

Year of construction: 2018, Condition: ready for operation (used), A high-precision WMZ H200-O CNC combination machine in need of overhaul is available. Processes: Drilling, turning, milling, tool holder: VDI40, tool positions: 12, control: Siemens 840D SL, operating hours: 14748h. Including cooling lubricant system, Knoll chip conveyor, Mahle air cleaner and Hydac hydraulic unit. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible. Klslhcdwjvz Df Iexjr

Condition: good (used), Year of construction: 1999, operating hours: 140,810 h, Functionality: fully functional, Gildemeister MF SPRINT 65 Machine no.: 07810000801 Control system: SINUMERIK 840 C Year of construction: 1999 Operating hours: 140810 Irco ILS short bar loader Annual maintenance by DMG, last maintenance 08.07.2024: Linear guide, axial bearing, KGT and adjusting nut of the X1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the Z1 axis replaced Linear guide, axial bearing, KGT and adjusting nut of the X2 axis replaced Kolhcdwsu Dg Ubjxelr Linear guide, axial bearing, KGT and adjusting nut of the Z2 axis replaced. Replacement of all sliding plate wipers. Safety window of the work area door replaced. Replacement of all feed toothed belts and the toothed belts for the counter spindle drive Tool drive 1 dismantled, disassembled, cleaned and re-stored. Filter mat of the main spindle fan replaced, coolant valves of turret 1 and 2 replaced. Chuck of the main spindle and counter spindle dismantled and cleaned. Machine geometry and working area remeasured and adjusted. Hydraulic filter cartridges replaced. Pneumatic filter replaced. Technical data see appendix Machine can be inspected under power Price 35.000 € VHB The offer is subject to change and non-binding, changes and errors in the technical data or the equipment, as well as prior sale reserved Used machines are purchased as seen, without warranty claims. . Delivery ex works excluding packaging and insurance, unless otherwise agreed. The price does not include statutory value added tax. As is usual with used machines, payment is made before loading.

Condition: used, mileage: 400,000 km, Year of construction: 2015, Serial number: YS2R6X4000211xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 20011 Truck specifications: - Mileage: Approx. 400,000 - Transmission: Automatic - Euro 6, 580 hp - Good tires - 6x4 - Mahler's Snow rigged - LS hydraulics, system for strimmers and plows - Trailer hitch - VBG - Rotor lamps - Extra lights - Tool cabinet - Nor Slep Asphalt tub, Approx. 5-5.5 m - Box (see pictures) - Istrail construction - Bed - Rear view camera - Radio/CD - Air conditioning/AC - Videos Specifications trailer: - 3 axles - Lift on 1 and 3 axles - Aluminum in box - Tires (see pictures) - Air suspension Description: Complete Asphalt Set with Dump Truck, Bucket, Dumper Box and Asphalt Trailer. The truck is Mahlers snow rigged and has LS hydraulics. Both the trailer and truck are EU approved and ready for delivery. Sold after estate. Km: 400000 HK: 580 Kjlhcdwev U Sv Usxelr Technical approved: Yes EU-approved until: 30.06.2025 Own weight: 14000

Condition: used, Year of construction: 2005, CNC sliding headstock automatic lathe TNL12/7 with bar loading magazine and fire protection device for oil machining Traub TX8i control system - Main spindle with C-axis - max. 12,000 rpm Holding brake Kolhjud Izmscdwxolr Attachments for driven guide bush - Counter spindle with C-axis - max. 12,000 1/min Holding brake Change parts on counter spindle for collet chuck - Device for deep hole drilling - Tapping side machining = back attachment with cross axis X4 with tool drive - Tool carrier 1 with 6 driven tool stations - Tool turret 2 with 6 driven tool stations - Front attachment with tool drive, max. 12,000 rpm, X3 and Z3 axis - Workpiece removal device - Mahle automatic filter - Installation of a KSS ultra-fine filter stage - Automatic CO² extinguishing device - Smoke and mist separator - Thread cutting without compensating chuck - FMB bar feeder ninimag S3, bar length 3200 mm - Coolant system - Chip conveyor

Condition: good (used), Functionality: fully functional, mileage: 491,831 km, power: 224 kW (304.55 HP), first registration: 05/2000, overall weight: 14,500 kg, fuel type: diesel, axle configuration: 4x2, Year of construction: 2000, Equipment: crane, hydraulics, MAN 14,224, year 2000, km 491831, EURO2, three-side tipper with BONFIGLIOLI 7200L2SI crane with two hydraulic extensions, payload capacity 7150 kg Kjlhcdwst Av Rzjxolr

Condition: used, Year of construction: 2015, operating hours: 7,947 h, Functionality: fully functional, machine/vehicle number: 12710000163, Maho DMU 95 monoBLOCK lid with comprehensive equipment TECHNICAL DETAILS X / Y / Z travel: 950 / 850 / 650 mm C-axis: 360° Speed: motor spindle 18,000 1/min Clamping surface C-axis table: 850 x 750 mm Clamping surface fixed table: 1,000 x 750 mm Control: CELOS® with Siemens 840D sl Operate Spindle power: 35 kW (40% ED) / 25 kW (100% ED) Tool holder: HSK-A 63 according to DIN 69893 Tool clamping: according to DIN 69872 Magazine slots: 60 (chain magazine) MACHINE DETAILS Weight: 13.7 t Connected load: 50 kVA Switch-on time: 23,422 h Spindle hours: 7,947 IKZ: 40 bar / 23 l/min through spindle center (AD) External coolant supply: 4 bar / 40 l/min EQUIPMENT - MPC Machine Protection Control chip tray with integrated coolant tank 500 l Kljljtr D H Sshcdwxer - 21.5 ERGOline® Control with multi-touch screen - 3D path control - Scraper belt chip conveyor with coolant system 600 liters, paper belt filter - Infrared measuring probe Renishaw PP60 optical (OMP 60) - 3D quickSET toolkit for checking and correcting the kinematic accuracy of 5-axis machine configurations - Coolant ring nozzle for vertical headstock, 15 water nozzles, 5 air nozzles - Flushing gun with pump 2 bar / 40 l/min - Cooling device Blast air through spindle center, selectable via M function - Operating mode 4 - manual intervention with open work area doors - Double switchover filter from Mahle on the coolant tank - Electrostatic air filter LTA 3000 BASIC Line 3002 year of construction 2015 - Documentation - Extensive additional accessories, e.g. 240 HSK-A 63 tool holders, long zero-point clamping system, extensive spindle tools (including - spindle tools (including Wohlhaupter), Coromant Capto system, tool cabinets, tool trolleys, etc.

Year of construction: 2018, Condition: ready for operation (used), A high-precision horizontal lathe WMZ in need of overhaul is available. Processes: Drilling, turning, milling, skiving, tool holder: VDI40, tool positions: 12, workpiece length range: 180mm-600mm, workpiece diameter range: 50mm-95mm, max. workpiece weight: 5kg, cycle time: 48min, control: Siemens 840D SL, operating hours: 15726h. Including cooling lubricant system Knoll KF 150-75, chip conveyor Knoll, air cleaner Mahle and hydraulic unit Hydac. The machine requires a complete overhaul. The machine components have been dismantled but are still present. Documentation available. On-site inspection is possible. Kolhcdovz Dfzswxelr

Year of construction: 1997, Condition: used, Hydraulic pump, hydraulic power pack, hydraulic tank Kolhcdegblxaowxolr -Hydraulic tank: from automatic band saw Behringer HBP 360A -Filter: Mahle industrial filters -Fill level indicator: sight glass -Dimensions: 480/600/H520 mm -Weight: 99 kg

Condition: used, mileage: 6,440 km, Year of construction: 2023, Field of application: Freight transport Serial number: YV2RT60D2PA32xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 17578 Specifications: - 2023 model - EU approved - About 6440km - 6x4 - Lifting tandem - Euro 6 - 551 hp - Gear: Automatic - Suspension: full air - Tires: (see pictures) - Hydraulics - Mahler's turntable - Break light - Extra light - Compressor horn - Nato connector x2 - 2 beds - Refrigerator - Climate/AC - Webasto - Ready for delivery Description: 2023 Volvo FH540 plow rig tractor. The car has only driven 6,440 km since it was taken out on Nov 23. Equipped with hydraulics and Mahler's plow plate. Kleljvg Nbrohcdwxer Ready for delivery. Km: 6440 HK: 550 Technical approved: Yes EU-approved until: 30.08.2025 Own weight: 11200 Total Weight: 31000 Payload: 19800 Width: 255 Length: 716,5 Kw: 405 Euro: 6 Gearbox: Automatic