Used Automatic Powder Coating System for sale (43,730)

Condition: like new (used), Automatic A frame dispensing system, picker The KNAPP SDA system is a modern automatic channel picking solution for high-speed products. It is ideal for drugstores, cosmetics, FMCG and pharmaceutical logistics environments, where fast and error-free order preparation is key. The products are stored in gravity channels. When an order is placed, the system automatically dispenses the required number of pieces, which are placed on a conveyor belt or in a collection box. Dksdpfx Ajzbt Suoktjn Number of sections: 24 (of which 1 section is a tube dispenser) 24 channels in each section Total: 552 channels + 15 tube dispenser channels (for 60 products per channel) The system can be expanded to double the above quantities. Main advantages: Automatic product release Fast picking Accurate inventory management Continuous operation High throughput Minimal human error potential Ideal application areas Drugstore logistics Pharmaceutical wholesale Cosmetic warehouses FMCG distribution centers E-commerce fulfillment Technological background The system: uses intelligent channel management, operates with PLC control, supported by WMS/KiSoft integration, provides real-time inventory monitoring. Operator functions The SDA user interface allows: channel status monitoring, test discarding, error diagnostics, fast maintenance intervention. Why KNAPP SDA? The SDA system is one of the most modern solutions for fast and efficient picking, which supports continuous, scalable logistics operations.

Condition: new, Year of construction: 2026, temperature: 230 °C, inner dimension length: 3,800 mm, inner dimension width: 1,600 mm, inner dimension height: 2,270 mm, total length: 4,560 mm, total width: 2,080 mm, total height: 3,270 mm, control type: PLC-controlled, Equipment: CE marking, Internal dimensions LxWxH: 3800 x 1600 x 2270 mm External dimensions LxWxH: 4560 x 2080 x 3270 mm Fuel: Oil or GAS, buyer can choose the burners Heating power: 160 kW (2 burners in total) Maximum working temperature: 230 o C; Heat resistant recirculating fans: 2 x 1,1 kW 10""Touch screen“ control Functions: preheating, degassing, drying, polymerisation Temperature sensors in working chamber: 2 vnt. Dkodey Ud H Ropfx Akten Two wing doors on both sided (tunnel) Ready for 5 rails (rails not included) Key features: Solid construction Special frame design reduce heat loss Removable side panels for easy maintenance Equipped with special located ventilation slots - keep insulation material in order Stainless steel panels in Heat exchanger zone Inhouse engineered heat resistant fans - cool, quiet, long - life Doors equipped with explosion proof, adjustable lathes Special design door handles for lower heat transfer Reliable Italian RIELLO burners POWDER COATING OVEN FLOWSYNC Control Features 10"touch screen control Standard programs: Preheating, Degassing, Curing, Drying Stores multiply curing recipes Integrated safety features HNS - heat management system, measures air temperature in few points. prevents overheating of curing parts Drying mode - time control exhaust and blow-in fresh air Vent mode - for higher finish quality WE ARE LOOKING FOR SALES PARTNERS

Year of construction: 2013, condition: used, functionality: fully functional, machine/vehicle number: GE-KEK-100L, Complete powder coating system for sale, including chemical pretreatment cabin, powder coating booth, and curing oven. The system is fully operational, well-maintained, and immediately available. Ideal for metal fabrication workshops, small industrial producers, or powder coating subcontractors. The equipment complies with EU industrial standards and features comprehensive electrical control systems. Included equipment: 1️⃣ Chemical Pretreatment Cabin Manual chemical pretreatment spray unit for surface preparation before powder coating. - Cabin dimensions: 1600 × 1600 × 2200 mm - Chemical tank capacity: approx. 800 L - Pump / spray unit: ST84 HE - Heating elements: 2 × 6 kW - Water temperature: 45–60°C - Motor power: approx. 1.5 kW - Electrical connection: 3×380/220 V - Closed circulation system - Chemical-resistant design 2️⃣ Industrial Powder Coating Booth - External dimensions: 1850 × 1600 × 2600 mm - Airflow: 3,000 m³/h - Motor: approx. 1.5 kW - Filter cartridges: 2 pcs with automatic cleaning - Airflow speed: 0.2–0.5 m/s - Maximum suspension size: 250 × 1000 mm - Spray opening: 1100 × 1100 mm Included equipment: - Extraction ventilation with silencer - Compressed air treatment unit - Automatic filter cleaning system - Powder recycling tank - EU-standard control cabinet - Condition: good technical condition, regularly serviced 3️⃣ Industrial Walk-in Powder Curing Oven - Internal dimensions: 1300 × 1300 × 2200 mm - Working temperature: 180–200°C - Typical curing time: 15–25 minutes - Heating capacity: 2 × 12 kW (electric) - Circulated air: 1,250 m³/h - Exhaust air: 100 m³/h - Motor power: approx. 1.5 kW - Insulation thickness: 150 mm - Year of manufacture: 2013 Included equipment: - Insulated chamber with door - Circulation fan system - Heating elements - Overheat protection - Airflow sensor - EU control cabinet - Steel base frame Condition: Excellent working order, complete documentation available General information - System type: Powder coating line - Condition: Very good - Year: 2013 - Documentation: Available - Operational status: Fully functional - Availability: Immediately available Price Dkodpsygg Rnofx Akton 💰 19,900 EUR (complete system) Location Hungary – EU Ideal for: - Metal fabrication workshops - Small powder coating facilities - Industrial maintenance workshops - Subcontract coating services

Condition: used, Year of construction: 1999, functionality: unexamined, Good day, Djdpfsy D Uphjx Aktskn For sale is a sputtering system for glass manufactured by Beijing Instruments Factory / JDS, model JDS800. The system utilizes the Physical Vapor Deposition (PVD) process to horizontally deposit coatings onto substrates. The unit measures approximately 5 meters in length and 1 meter in width. The substrate size is about 400 x 420 mm. Please refer to the photos for detailed dimensions. The system is complete with various power supplies, fore-vacuum pumps, and a turbomolecular pump. Technical drawings are available, along with several folders containing technical documentation. The machine was disconnected from the mains in working condition. Dismantling and transport are the responsibility of the buyer.

Year of construction: 1989, condition: ready for operation (used), Processes: nickel strike, alkaline/cyanide zinc plating, base material: steel, stainless steel, throughput capacity for racks: approx. 11/h, production time: operating time minus rack cycle time, drums per rack: 1, internal drum length: 870mm, width across flats: 350mm, average loading weight per drum: approx. 37kg, max. loading weight per drum: approx. 50kg, the loading weight depends on the geometric surface area of the parts, anode distance: 650mm (700mm for electrolytic degreasing), operating voltage: 3x 220/380V, 50Hz, Mp/SL (-15 to +10%), heating: electric, heating-up time: approx. 5h at an initial temperature of approx. 15°C, cooling: cooling water, supply: 8°C, return: 12°C, city water: 2bar, circulating water: 2bar, compressed air: 8bar, drive/control power: approx. 166kVA, rectifier power: approx. 240kVA, heating power: approx. 136kW, extracted air volume: cyan./alk. 12,000m³/h, acidic/alk. 19,450m³/h, dissipated heat quantity: approx. 80,000kcal/h, the system has been emptied of all substances, transformers are free from hazardous materials, complete documentation available. An on-site inspection is possible. Dedpfx Akey T N Iqjtskn

Condition: excellent (used), functionality: fully functional, BMB Coating System for Printed Circuit Boards, Model TUA-200 / 2 in EXCELLENT condition. Purchased: 2023 (as-new condition) and only in operation for 6 months. Version: Professional Version (excellent feature set) - High speed coating up to 4x faster - 3 coating processes in one unit - Suitable for components up to 1200x570 mm - Permanent viscosity/temperature control - Full traceability (depending on version) - Tool recognition and parameterization - Maximum protection by encapsulating components with coating - (Digital job-documentation system, currently under review) - Large paint tank capacity for tall components Dkedjv I Tb Espfx Aktsn - Paint consumption calculation - Innovative, robust, and proven technology With the BMB Traceability and PDM System (equipment subject to clarification), you can track at any point which component was produced, when, where, by whom, and how. All requirements regarding ISO/TS 16949 are fulfilled. When setting up a tool, the PDM system automatically recognizes all necessary parameters for coating. Work instructions, videos, technical data sheets, processing notes, etc. – everything at your fingertips! 19″ swivel smart touch panel Viscosity control Tool monitoring: automatic recognition and adjustment Electrically height-adjustable machine Coating processes: - Dip Coating (DipCoat) - Selective Contact Coating (SCC®) - Selective Transfer Coating (STC®) The system can be shipped by freight carrier upon request. #8300

Condition: used, Year of construction: 2016, Automatic cutting table system for textiles and leather Manufacturer: Atom Type: FlashCut 2H 1660B UP Year of manufacture: 2016 CNC control Working area: 1,540 x 1,200 mm Cutting window: 1,540 x 600 mm Maximum cutting height: 20 mm Maximum travel speed: 80 m/min Maximum acceleration: 1G Vacuum power: 1 – 8 kW Connected load: 5.5 kW 380 volts, 3 phases, 50 Hz Compressed air: 6 bar, 200 l/min when using pneumatic tool holder 9 bar, 400 l/min 2 independently operating multi-tool heads consisting of: Tool module for all tool holders Writing nib for applying markings 2 punch tools with different diameters Minimum diameter: 1 mm Maximum diameter: 8 mm one needle Circulating conveyor belt (transports the material into the working areas) Vacuum table: divided into squares of 300 x 300 mm High-performance vacuum turbine with frequency control up to 1 – 8 kW High-intensity projector Servo drive for the X, Y, and Z axes Safety device with light curtain monitoring and emergency stop switch Machine dimensions: 2,210 x 2,506 x 1,841 mm Djdeyf Egxepfx Aktekn Weight: 1,630 kg 3626

Condition: excellent (used), Year of construction: 2021, We offer the ETL Prüftechnik ATS 400 X8 automatic test system, designed for electrical and safety testing of products in industrial and laboratory environments. The device is used for, among others: • Quality control (QC) • End-of-line production testing • OEM laboratories and testing stations ⸻ Basic data • Model: ATS 400 X8 • Power supply: 230 V / 50–60 Hz / max. 10 A • Year of manufacture: 03/2021 • Manufacturer: ETL Prüftechnik GmbH (Germany) • Condition: very good, well-maintained equipment • Last factory calibration by ETL: 05/2023 • Weight: 38 kg ⸻ Equipment / Included in delivery Dodpjyc H N Njfx Aktjkn • Main ATS 400 X8 unit with integrated touchscreen display • Windows 10 Pro operating system (OEM) • Complete set of test leads and accessories (as shown in the photos) • Manufacturer’s documentation • Original markings, nameplates, CE certification ⸻ Technical notes • This is a professional test and measurement instrument, not consumer electronics • The equipment is ready for use in a production environment • No signs of tampering; all connectors and interfaces are complete

Year of construction: 2006, condition: as good as new (ex-display), machine/vehicle number: 31331, DISTILLER DNP 2000 SEMI-AUTOMATIC STEAM DISTILLATION SYSTEM - PROTEIN-NITROGEN Raypa DNP-2000 Year of manufacture 2006, unused Protein-Nitrogen distiller based on the Kjeldahl method. Automatic, to analyse protein nitrogen in raw material samples or processed material for the food industry. Specific methods available. Results comply with regulations: EN/ISO, AOAC. NITROGEN DISTILLER – DNP-2000 Features • Twenty free user programs. • Additionally, the system has three fixed programs: – Ammonium sulphate test. – Preheating of the system. – Sample waste washing. Advantages • Optional kit for automatic titration. • Sample suction. • 20 user programs. • Pump calibration by end-user. • Steam generator with water level control. • Boric acid pump. • Open door sensor. Performance • Measurement range: from 0,1 to 200 mg of N. Djdpsfiliwefx Aktskn • Nitrogen recovery: ᐳ 99,5%. • Reproducibility: ± 1%. • Distillation time: 4 min/100 ml. • Cooling water consumption: 1,2 l/min. • Power: 2000 W (100%). Programmable parameters and values • Water for dilution: 0-240 ml. • OHNa solution: 0-240 ml. • H3BO3 solution: 0-240 ml. • Reaction time (delay): 0-30 min. • Distillation time: 0-30 min or indefinite. • Steam power regulation: 30-100%. Safety • Closed-door detection. • Digestion tube detection. • Over-temperature thermostat. • Uses in the food industry but also in oenology for vinification. • Documents: Manual instruction + mounting gaskets and socket • For the Romanian companies, there is the possibility of selling in installments. Price Euro 3.600 + VAT Ex Works Loaded of FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: used, Year of construction: 2018, Wagner electrostatic powder coating system for enamel application, year 2018, serial number 30210, with a touch screen control panel, consisting of: • 1 PVC spray booth with overall dimensions of length x width x height: 3200 x 2130 x 4000 mm • Dimensions of the part entry/exit opening: 1000 x 1000 mm • 1 HERDING filter (cyclone) with automatic powder recovery • 1 shaker for powder suspension with extraction and powder recovery • 1 EP powder feeder with 32 pumps (injectors) • 12 automatic spray guns, model PEA-C2, for enamel application, with a double blade head • 9 universal EPG/S2 control units for powder guns • 1 GCA compressed air treatment unit used in the system (heating/humidification) • 1 overhead monorail transport system, 35 m long, serving the spray booth. Dsdpey Tn Atjfx Aktjkn The line is located at the parent company in Italy, near the town of Pordenone. Direct contact is possible, upon prior arrangement.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, paper width (min.): 2,100 mm, paper height (max.): 120 mm, total length: 3,300 mm, total width: 3,500 mm, total height: 2,100 mm, Bürkle LFC 2100 Liquid Coating System Object: For liquid coating of digitally printed media. Suitable for applying primers or protective coatings, as well as for the full-surface finishing of digitally printed media in a continuous process using solvent-free UV coatings and direct coating curing using UV radiation from above. Condition: Like new (date of purchase 2023) Dsdpfxey Szwus Aktekn Availability: Immediately Brief Description For sale is a high-performance coating system from Bürkle, model LFC 2100. The machine was acquired from the company Welte in 2023 and has only been in operation for a few hours since then. It is in excellent optical and technical condition (demonstration condition) and offers a first-class solution for UV finishing of large-format prints. The machine also includes a cleaning or washing unit with extraction, as well as a second roller (smooth roller). Technical Data & Highlights Maximum working width: 2,100 mm Substrate thickness: Flexibly adjustable up to 80 mm Throughput speed: Continuously adjustable (up to 25 m/min) Drying: Includes a powerful UV drying unit (TRUV) for immediate further processing Control: Modern control panel for precise process control Asking price €150,000 (negotiable) plus VAT | ex works (EXW) Contact & Inspection The system is still assembled and can be inspected and tested on site after prior appointment. (Location: St. Martin bei Lofer, Austria)

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Dodpfefx Nfmsx Aktjkn Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Dkodsfz Dubspfx Akton All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ Dkjdpjyg H Erofx Akten 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Condition: new, Year of construction: 2026, 🏭 POWDER COATING BOOTH KPP Automatic filter cleaning with adjustable pulse timing, plus manual mode. 🧼⏱️🖲️ 100% polyester filters - washable, water-resistant, long-lasting. 🧵💧♻️ ROMER JET™ filter cleaning - patented high-speed air pulse for powerful cleaning. 💥💨🏅 Low-noise aluminium fans (74-79 dB) - safer, spark-minimized operation with low power use. 🔇⚡🛡️ Adjustable airflow baffle - antistatic plate protects filters and improves extraction. 🌬️🛡️📈 Leak-tight filter mounting - gasket + clamp for strong sealing and easy service. 🔩🧷✅ Touchscreen control - auto (time), auto (clogging sensor), manual + filter change alerts. 📲🔁⚠️ Optional powder container - waste collection or fluidized tank with direct applicator feed. 🧺💨🎯 Dkedpfxefy T Tbo Akten Overhead puller - moves beams through the booth, reducing manual effort. 🏗️➡️💪 Integrated sieving unit (with container) - clean recovered powder for reuse, EX-zone vibrator. 🧪♻️⚙️ Explosion-proof design - components selected to prevent explosive mixtures. 🛡️💥✅

Year of construction: 2020, condition: new, 7" Touchpad Large color touch panel looks aesthetically and uses comfortably and intuitively. Set on it all the important parameters.Memory 20 programs each with 10 events You can save up to 20 programs and activate up to 10 consecutive events time-temperature arranged in the heating curve. This is especially needed for the more demanding process.Information about consumption of power Consumption is calculated based on the settings of the burner. This feature will allow you to estimate the cost of the cycle, consumption and plan check staff.Recorder of cycle USB Each of the ovens is equipped with two-channel temperature recording on USB flash drive.. Each file is automatically created and is responsible for a separate cycle are recorded temperature extremes, hour and minute measurement. Files are saved in * .csv (Excel sheet) For all buyers the end of 2016 option is free, the competition for the option you have to pay up to several thousand euros. History 20 latest of burn Something's wrong? and perhaps too few overbroad elements from the oven? Now you check thoroughly oldest and lastest burning parameters, how often took, whether cycle proceeds without any problems, what was the consumption and when they ran. Start the oven automatically at 6 am Dedpofz Apqsfx Aktjkn How many times have you stay after hours and expecting end of the cycle? If you own a powder coating plan that works for a long time, You know exactly what we are talking about. With our solution you can leave cycle not cured in the oven, to automatically end when you come to the job next morning.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Dodpofz A Ilsfx Aktokn Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 Dkjdpfxofz U Nbj Aktsn ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Touch control Dodpjfzktzjfx Aktjkn ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.

Year of construction: 2020, condition: new, Automation Use of one photocell Using one photocell in the space of workpiece allows you to measure the length of the workpiece and, consequently, gives you the opportunity to turn on the guns when the item is in range, and to switch off the gun immediately after the workpiece is finished. The photocell is included in the standard equipme Array of guns Vertical 8pcs. pistols Control - profiControl 10 " Cyclone - CK-D1250 Dust collector - OZ-8H Center - RP-01 + SV-200 MA1-23 x 2 pcs manipulator Os X MX-100 x2 pcs. Horizontal goal - Horizontal goal W400 x2 items Vertical gate - H2000 vertical gate The maximum painting speed is 1,65714285714286m / min 0 piece pulling machines Pow. requires 10188m3 / h to fly Required min. cabin passage W900mm H2100mm Pipe diameter 500mm - 16.9m / s minimum 16m / s Air consumption 1210 L / min + Sug. SC-20 compressor Min.current connection 28.14 kW Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus braking the energy and powder coating. Vertical detection of the detail of the workpiece. The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time at which the detail should appear in the gun space - allowing guns to be selectively switched on or off. Application of light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to manipulate the manipulators. Benefits of using gates and photocells The benefits of using photocells or light gates are primarily energy and powder savings. Eliminate painting of a zone in which there is no detail. With the use of light gates, precise control of the guns. Our lines can be optionally equipped with photocells, or light gates Using one photocell in the workpiece space allows you to measure the length of the workpiece and, consequently, gives you the ability to turn on guns when the item appears in their range, and turn off the gun immediately after the workpiece is finished. Identification of details using special tags. A plate with identification holes is placed over the suspension. Based on this, the PLC controller in conjunction with the photocell recognizes the painted detail, turns on and off the guns in a timely manner - thus saving the energy and powder. Dsdpfxjflq Spo Aktskn The use of light gates with detectors horizontally allows the PLC to analyze the vertical shape of the workpiece. The PLC counts the time in which the detail will appear in the gun space - allowing guns to be selectively switched on or off. Using of light gates with multiple sensors horizontally and vertically This solution allows precise measurement of the dimensions of the workpiece, which makes it possible also to adjusting the manipulators. The benefits of using photocells or light gates are primarily powder and energy savings Eliminate painting of a zone in which there is no detail With the use of light gates, precise control of the guns.

Year of construction: 2025, condition: new, Curing ovens shown in the photos can vary in price depending on size, configuration, and optional features. 💡📏⚙️ At ROMER, we manufacture both standard models and fully bespoke solutions, tailored to your process requirements. 🏭✅ Tell us your part size, line capacity, curing profile, and available space - and we will propose the best setup and the options that actually improve daily performance. 🔥🎯 🧠📡 Control and monitoring Live process control for temperature, time, airflow, and modes - with alarms and saved recipes for repeatable cycles. 🔁✅ 🔥🧩 Heating module Fast heat-up and stable temperature thanks to efficient heating elements and quick energy transfer. ⚡🌡️ 🌀💨 Air circulation Uniform airflow reduces temperature differences for consistent coating quality. 🎯✅ 🧱❄️ Insulation and design Smart chamber construction minimizes heat loss - faster reaching setpoint, lower consumption. ♻️📉 🛡️⚠️ Safety and certification Sensors, interlocks, and protection logic increase safety and reliability. 🔒👷 ⚡💰 High efficiency Optimized heat transfer and reduced losses mean real operating savings. 📉🔥 ⏰🤖 Automatic start Programmable schedule - automatic preheating before the shift for smoother production starts. ⏱️✅ 🚪🔒 Self-latching doors + intelligent chimney Prevents accidental opening, chimney activates only when needed for safer operation. 🧯✅ 🌿🔋 ECO mode Low-energy standby when idle - fuel consumption reduction up to 20% (depending on process). 🌱📉 👀💡 View and lighting Inspection without opening the door - fewer temperature drops, easier supervision. ✨👁️ 🛤️🔥 Guide rails + automatic hood Heat hood runs only during loading to reduce temperature loss, automatic rail infeed improves ergonomics and loading speed. 🙌⚙️ 🎛️🌡️ MULTI-ZONE HEAT Independent zone control for uniform curing of parts with different mass and geometry. 🧩✅ 🧠♨️ MTS system Dksdpjfzb Rcefx Akten Heating elements mounted without thermal bridges - higher efficiency and faster time to set temperature. ⚡⏱️ 2-in-1 🧱↔️🧱 Split chamber Movable partition for two independent zones - drying and curing in one unit for maximum flexibility. 🚀🔁 🎚️🌀 VFD ventilation Variable fan speed based on chamber conditions - better control and lower electricity use. ⚙️💡

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Dkjdpfx Aefz Dt Nokton Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Dodpfxefz I D Do Aktekn - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. Dkjdpfx Akofz I Edetjn All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Touch control ROMER cabins are equipped with 4 "color touch displays. Operation of the cabin is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual Filter clogging sensor A sensor is installed in the cabins, which queues the filters for cleaning when they become clogged. The system also informs you when the filters have worn out Automatic filter cleaning The electronic system for automatic filter cleaning has a range of cleaning frequency and shot time adjustment. Each of the filters is cleaned separately, the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Djdsfz I Ehopfx Aktjkn Low volume Aluminum fans are very quiet, they work at the level of 74-79dB - It's not much. with the standard cabin structure, it's even hard to talk. Broaching machine through the cabin By dragging the suspension beams within the cabin, the cabin improves work efficiency, thus relieving the painter who no longer has to move them by hand. Explosion-proof design The booths are designed to prevent the formation of an explosive mixture during the painting process. Each of the components has been carefully selected to minimize this risk.