Used Trotec Engraving Machine / Cutting Machine for sale (66,899)

Condition: good (used), Iijima’s excellent, high-speed JF-1030, manufactured in 1991, modified for Bobst die-cutting tools. Machine number 8061 Year of manufacture: 1991 Die-cutting unit adapted to be compatible with/for Bobst die-cutting blades and mounting strips. Sector segment driven by a dual set of bevel gears instead of the previous triple system. Smoother and vibration-free, improved operation of the gripper carriages. Chains renewed in May 2023. Gripper carriages have been repaired where necessary, but not replaced; current tolerance on front registration for rigid cardboard types < 0.15 mm. Engagement clutch (electric 24 VDC, Warner) replaced in May 2023, as well as all rolling bearings on this shaft, including those in the oil casing just before and after the worm gear. Oil seals replaced. Oil casings flushed and thoroughly cleaned in preparation for conversion from mineral oil to full synthetic oil. Absolutely no foaming, quieter operation. Decommissioned on 23/12/2025; available for sale ex-warehouse Van Rooij from that date. For the end user: can be supplied including installation, transport, and warranty. Other specifications as per the factory brochure. Technical Specifications – Flatbed Die Cutting Machine Materials • Paper from 80 g/m² • Solid fibre board / cardboard up to 2000 g/m² • Corrugated board up to 4 mm, depending on material quality and cutting layout ⸻ Sheet Sizes & Formats • Maximum sheet size: 750 × 1050 mm • Minimum sheet size: 350 × 400 mm • Maximum cutting form size: 745 × 1070 mm • Maximum cutting surface: 730 × 1030 mm • Inside chase dimension: 750 × 1050 mm ⸻ Performance • Maximum cutting pressure: when running max. sheet size • Maximum speed: up to 8,500 sheets/hour • Gripper margin: adjustable • Normal cutting rule height: 8 – 12 mm ⸻ Pile Data Feeder pile • Height (incl. pallet): 1,200 mm • Weight (incl. pallet): 1,000 kg Delivery pile • Height (incl. pallet): 1,080 mm • Weight (incl. pallet): 1,000 kg Auxiliary piles • Feeder auxiliary pile height: 450 mm • Feeder auxiliary pile weight: 450 kg • Delivery auxiliary pile height: 800 mm Ljdpfx Aox Ndu Dekushg • Delivery auxiliary pile weight: 800 kg ⸻ Machine Dimensions & Weight • Length without feeder: 4,540 mm • Length with feeder: 5,810 mm • Width: 2,350 mm • Height: 2,100 mm • Weight of machine: 15,000 kg • Weight of feeder: 1,000 kg ⸻ Electrical & Air Requirements • Power supply: 3-phase AC • Main motor output: 15 kW • Connected load of machine: 32.4 kVA • Compressed air required: 6 bar • Air intake volume requirement: approx. 30–50 l/min ⸻ Additional Information • Heavy-duty industrial construction • Designed for continuous professional die-cutting production • Specifications subject to alteration

Condition: refurbished (used), Year of construction: 2020, functionality: fully functional, The Autobyte 3602D is the automated cutting system for professionals who demand speed, accuracy, and efficiency. Equipped with premium Morso guillotine blades, it delivers perfect 45° corners in wood, plastic, and MDF—consistently, every time. Lodpow U D E Ejfx Akushg With a capacity of over 500 frames per hour, you can significantly increase your production output. At the same time, you drastically reduce material waste: just 1 mm cutting loss per cut, compared to up to 6 mm with conventional saws. Smart automation features include: Automatic loader handling up to 13 lengths Precision clamping system for maximum stability Integrated splitter to sort cut pieces and remove waste automatically Full control via a Mitsubishi touchscreen and PLC system, combined with reliable SMC pneumatics. The result: higher output, lower waste, and consistent premium quality—exactly what your production line needs.

Year of construction: 1995, condition: good (used), Multifunctional punch, punch press, hole punch, pneumatic hole punch -operated: pneumatically Lhjdpfxob A Nc Hs Akueg -Year of manufacture: 1995

Condition: used, Year of construction: 2006, operating hours: 7,600 h, functionality: fully functional, machine/vehicle number: 365591, working range: 4,250 mm, travel distance X-axis: 2,200 mm, travel distance Y-axis: 4,250 mm, travel distance Z-axis: 200 mm, type of input current: three-phase, input voltage: 400 V, sheet thickness aluminum (max.): 100 mm, FLOW Waterjet Cutting Machine IFB-12 – Waterjet System We are selling our Flow waterjet machine with an additional special stainless steel water tank. Food-grade / Industrial / Chemical applications The machine has been in use with us for 2 years. No emergency sale – being sold due to purchase of a new machine. The system is in very good condition Fully functional Manufacturer: Flow Year of Manufacture: 2006 Type: IFB Model: IFB 12’ Base Serial No.: 365591 Laser type: Renishaw Transport dimensions Forklift pockets: 17x10 cm Total height: 220 cm Total width: 480 cm Total length: 450 cm Tank Length: 425 cm Width: 255 cm Data sheet for the machine is available (PDF upon request) Inspection before purchase is possible and encouraged. Delivery available on request. Lsdpjy D A Ifsfx Akuohg Sale as-is in condition shown in the pictures.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: semi-automatic, actuation type: electric, controller manufacturer: Bodor, All-round sheet fiber laser metal cutting machine Equipped with automatic functions of nozzle changing and one-click processing, P-Series is competent for all cutting demands. Flake graphite in the cutting machine bed improves greatly the shock absorption and wear resistance, and residual stress almost disappears after age hardening, therefore, precision and lifetime of the equipment are improved, and costs saved. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The fully closed-loop control adjusts according to feedback to ensure that the actual motion position is consistent with the theoretical input value. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1500W - 30000W Cutting Area: 3048*1524mm - 6100*2500mm Cutting Speed: 0-169m/min Ledpfx Akohwaapsuehg Positioning accuracy: ±0.03mm - ±0.05mm Repositioning accuracy: ±0.02mm - ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: new, functionality: fully functional, Year of construction: 2026, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Lsdpfx Akshwaa Eoushg Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: used, Year of construction: 1955, functionality: fully functional, machine/vehicle number: D08L/8075, Offer Number: D08L/8075 Machinetype: straightening and cutting machine Make: WAFIOS Type: DRf/30 Constr. year: 1955 diameter range: 7-16 mm cutting length: 6000 mm Ledpfx Aewi Svijkuehg speed - meter/min: 65 Location: In our warehouse

Year of construction: 2026, operating hours: 22 h, condition: used, machine/vehicle number: 6500040884, Laser cutting head with autofocus, BODOR Genius, laser power (kW): 12, control system BODOR Thinker 3.0, ergonomic remote control BODOR Mango, extraction system, water cooler, dimensions (W x H x L): approx. 324 x 240 x 1100, weight (kg): approx. 8100, max. sheet thickness carbon steel/stainless steel (mm): 35, max. sheet thickness aluminum (mm): 25, max. sheet thickness brass (mm): 16, assembly in 2024. Lhodsy T Nzqepfx Akusg

Condition: good (used), Year of construction: 1992, functionality: fully functional, ▪ Core diam.outside: max. 250mm ▪ Core diam.inside: max. 200mm Ledpfxey Tk Sqe Akushg ▪ Core length (input): max. 5000mm ▪ Cutting length: 100 – 2500mm Complete core cutting installation, including dust collection unit.

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Lhsdpsy R Adyefx Akujg

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002).Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Lhjdjy Rz Nzspfx Akueg Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Please Note: this lot has been professionally decommissioned and secured for transit Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser. Lhjdpfxoy Rz Iwo Akujg

Condition: used, Year of construction: 2010, functionality: fully functional, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, sheet thickness aluminum (max.): 35 mm, overall weight: 4,000 kg, total width: 2,000 mm, total length: 6,000 mm, working width: 2,000 mm, travel distance X-axis: 6,000 mm, type of cooling: air, ambient temperature (max.): 40 °C, Equipment: documentation/manual, Used MicroStep oxy-fuel cutting machine (plasma system) SPL 6001.20 P with Kjellberg torch. Used, in working condition. Will be cleaned before delivery. Can be inspected on site. Ledpfoy T Exrsx Akuohg Exhaust system can be purchased separately.

Condition: good (used), functionality: fully functional, Year of construction: 2013, operating hours: 9,100 h, control type: CNC control, laser power: 4,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 20 mm, sheet thickness aluminum (max.): 15 mm, sheet thickness brass (max.): 6 mm, sheet thickness copper (max.): 6 mm, pipe diameter (max.): 310 mm, pipe length (max.): 3,000 mm, table length: 3,000 mm, table width: 1,500 mm, working length: 3,000 mm, working width: 1,500 mm, cutting speed: 5,000 mm/min, Equipment: cooling unit, dust extraction, emergency stop, nozzle changer, safety light barrier, TRUMPF TruLaser 3030 fiber (L49) (A1) 11/2013 4 kW 3. Technical Specifications Working area: 3000 × 1500 mm Operating hours (04/2026): Beam ON: 9,100 h Machine ON: 31,000 h 4. Maintenance & Condition - Maintained annually by TRUMPF - New IPC installed in 01/2026 (cost: 12K EUR; old IPC with broken network port can be used as a backup) 5. Standard Machine Configuration Working Area & Machine Design Working area: 3000 × 1500 mm Fully enclosed machine frame Enclosed beam guidance via light cable (LLK) Integrated cabinet with roller shutter Sliding roof Working area illumination Integrated electrical cabinets with interior lighting Drive & Motion System Torque drive combined with linear direct drives Automatic pallet changer in longitudinal direction Longitudinal conveyor belt Process Support Cooling unit Positioning laser diode Spray device Automatic nozzle cleaning Transport and installation equipment Cutting Technologies PierceLine FocusLine NitroLine PlasmaLine Microweld 6. Laser Standard Laser Configuration Integrated solid-state laser with 1 LLK output Pump diode excitation Laser power control Extended Laser Configuration TruDisk 4001 solid-state laser with 1 LLK output Upgrade capability for max. 1 additional LLK output on the TruDisk 7. Cutting Unit Standard Configuration Universal cutting unit Lhodpfx Asy S U N Rskueg Single cutting head strategy Protective glass against lens contamination Protective glass condition monitoring ControlLine: height control and sheet edge detection Extended Configuration Nozzle changer DetectLine: precise sheet position detection Copper cutting package (including cutting data for N2, O2) Brass cutting package (including cutting data for N2) 8. Control System & Software Operation & Programming TruTops Laser via network access (customer-provided PC required) Easy workshop programming Fast reproduction of jobs Integrated technology database Automatic shutdown function Programmable cutting gas / pressure selection Control System Sinumerik 840D SL control system 17" touch color display Software & Process Functions ContourLine Microweld FastLine FlyLine AdjustLine Remote teleservice via internet 9. Data Transfer & Interfaces Standard Interfaces USB interface RJ-45 network connection Extended Interfaces MDE interface 10. Safety & Environmental Systems Safety Features CE certification Light barriers Machine enclosure with certified viewing window (right-side door) Extraction & Dust Protection Multi-chamber extraction system Compact dust extraction unit Dust protection for equipment sheet metal 11. Material Handling & Automation Conveyor & Handling Systems Wide cross conveyor with tilting container Container positioned on the left side of the machine Automation Options LiftMaster retrofit 12. Tube Cutting Device / RotoLas Tube Processing Equipment Tube cutting device incl. 4 internal and external jaws (including electric roller roof, left-side sliding inspection door for enhanced visibility, and accessory trolley; integrated cabinet with roller shutter omitted) Components Automatic chuck External support for tubes up to 3 m (incl. 1 stepped roller) Base jaws for additional clamping sets Prism clamping set First base carrier with shifting device (longitudinal pallet changer) Additional base carriers 2 × workpiece carriers D 15–310 mm Clamping claws (2 pcs.) 13. Warranty / Sales Notice No warranty Purchased as is.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, laser power: 600 W, type of cooling: water, table length: 1,300 mm, table width: 900 mm, Equipment: CE marking, For cutting and engraving on wood, cardboard, leather, etc. Purchased new in 2021. In very good condition. Specially designed with two laser heads, one 600W and one 90W, allowing you to adjust power, detail, and speed according to your project. - The bed is designed to accommodate a honeycomb structure, ensuring high structural stability if needed - Ruida control system: USB interface Lodpfx Aexzrugekuehg - Supported graphic formats: CorelDraw, AutoCAD, Photoshop - Drive system: Stepper motor and Leadshine driver - Supported graphic file formats: BMP, PLT, DST, DXF, and AI - Digital control panel - The transparent viewing window with tinted eye protection allows you to monitor engraving progress at any time and can automatically cut the power when opened. - An emergency stop button is available for added safety. - Mobile casters make the machine easy to move - Front opening allows for processing larger projects Technical specifications: • Working area: 1300 x 900 mm • Laser power: SLW 600W and RECI 90W • Sealed CO2 laser tube • Maximum cutting speed: 0-600 mm/s • Maximum engraving speed: 0-1000 mm/s • Power supply: 220V±10%, 50/60Hz Extras included: Sold with CW6200 chiller, honeycomb bed, and submersible pump for mirror cooling. Spare 2” and 4” lenses included.

Year of construction: 1999, condition: ready for operation (used), Workpiece dimensions: 4000x2000x20mm, laser power: 4kW, connected load: 88kVA, nitrogen/ oxygen connection: 30/ 20bar, control system: Siemens 840D, length: 7000mm, width: 3600mm, height: 2300mm, weight: 12.5t. An on-site inspection is possible. Lhsdpfey T N Ikex Akuog

Condition: used, Year of construction: 1997, Fully automatic index cutting machine Equipped with: Feeding Opening Counting/cutting 1 Counting/cutting 2 Printing station 1. colour Printing station 2. colour Delivery Technical data: Max. size: 185 x 130 mm Min. size: 50 x 60 mm Book thickness max. 15 mm (depending on product) Binding category: all standard binding sorts Cover bendable (no hardcover) Cut form angular cut Types Printing European/Arabic index combined indexes double and multiple indexes Lhjdpfxjy Syulj Akueg Printing: one or two colours letters and words Dürrer promotional/explanatory video:

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, wire diameter (max.): 16 mm, 2006, Eurobend CNC 16x4 rebar straightening and cutting machine, designed for processing rebar from coils. It is in used but working condition. It features 4 x 5-ton decoilers with pneumatic brakes. It has 4 straightening rotors for rebar wire with diameters of 8-10-12-(14) or 16 mm, and automatic cutting with hydraulically operated moving cutters. It can operate with 1 line or even up to 4 lines simultaneously. Lhodpordvq Aefx Akuog PC with barcode scanner option. Cutting length up to 14 meters and more. 4 storage pockets for cut bars. Chain conveyor for sideways and upward transport of cut bundles.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2026, control type: CNC control, laser type: fiber laser, laser power: 6,000 W, sheet thickness (max.): 20 mm, table length: 3,000 mm, table width: 1,500 mm, GEKA Fiber Laser including: RAYCUS 6kW laser source Lhodpfoy T Rc Aox Akusg BOCI BLT441 cutting head with automatic nozzle cleaning CNC control system FSCUT8000 Servomotor & axis drive INNOVANCE & YAKAWA Linear guide with rack and pinion drive CYPCUT operating software, nesting software included Electrical and pneumatic components Installation and training

Condition: new, Year of construction: 2026, Geka plasma cutting machine GCS P-3015 table size 3000 x 1500mm incl. plasma source Hypertherm 105A incl. Hypertherm nesting software - GEKA CNC cutting table - Hypertherm Powermax - Cutting capacity: steel 22mm, stainless steel 20mm, aluminum 12mm - CNC control with GproCUT 2D CAD cutting software - Nesting included. - Country of manufacture Spain incl. CE conformity. - Heavy duty base for more support and rigidity. - CNC Tex computer control with touch screen. - Linear guides on all axes for high repeatability. - Safety cutting head to prevent damage to the cutting head. - Rack and pinion gearbox with 70kg/cm servo motors. Lsdpfxjy T N R Es Akuohg - Fully enclosed cable drag protects cables from damage - Movement speed 40 meters/min. - Resolution 0.01 mm. - Optional automatic lubrication in all axes. - Optional, separate suction chambers in the machine bed. - Z-axis with integrated THC (Torch Height Control) to ensure automatic cutting distance between torch and material during the entire cutting process. - Torch anti-collision system (machine stops before any collision) - Laser pointer to check the X and Y axes for zero reference. - The effective cutting area for P-3015 is 3000 x 1500mm. - Gantry height Z = 100 mm.

Condition: as good as new (ex-display), Swift-Cut CNC plasma cutting machine, type 1250Pro WT with water table and marking unit Cutting area 1250 x 1250 mm Lhsdpfx Akoy Sxvhsuog with ESAB power source Technical data: - Cutting area for sheet metal formats up to 1250 x 1250 mm - Table dimensions 1980 mm x 1840 mm - Table weight 800 kg - Table capacity 160 l - Height 1500 mm - Z-axis travel 130 mm - Max. load capacity 200 kg/m² - Traverse speed 20 m/min - Guides: Hybrid servo motors and double-sealed linear bearings on all axes. - Closed ball screw-driven Z-axis. Double-driven Y-axis. - Bridge clearance 150 mm - Max. material thickness 25 mm - Max. cutting capability for square tubes 100 mm - Required compressed air pressure 7-7.5 bar - Flow rate 300 LPM - Linear positioning accuracy 0.5 mm/m - Repeatability 0.4 mm/m - Measurement of roundness tolerance 0.3 mm/m FURTHER DETAILS AVAILABLE UPON REQUEST.

Condition: excellent (used), Year of construction: 2011, Sheet metal format: 3000x1500 mm Ledpfoxxkm Nex Akujhg Axes X/Y/Z: 3065/1560/150 mm Price on request.

Condition: good (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: S2501CV, cutting width (max.): 1,600 mm, cutting height (max.): 25 mm, Bullmer CNC Cutter Turbocut S2501CV – reliable and ready for immediate use Ledpfjy Tl Nwsx Akushg For sale is a Bullmer CNC cutter, model Turbocut S2501CV, manufactured in 2004, in good and fully functional condition. The machine operates reliably and is ready for immediate use. The following have already been replaced: Knife motor – new Controller – new In addition, two original Baldor replacement controllers are included in the scope of delivery – ideal as a spare and for long-term security. The cutter is ideally suited for professional use and impresses with its proven Bullmer quality. Inspection and test run can be arranged at any time.

Condition: new, Year of construction: 2025, Base sheet fiber laser metal cutting machine with full protection Maximum cutting area reaches up to 12000mm*2500mm, suitable for a variety of cutting options. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. The cutting process works even at the edge of thin sheets, and ensures no chatter marks. With One-click Processing, one laser cutter is able to process multiple sheets in batches with a one-off setup, achieving batch processing. Condition: New Laser Type: Fiber Laser Laser Power: 1000W - 40000W Cutting Area: 3048*1524mm - 12500*2600mm Cutting Speed: 0-110m/min Positioning accuracy: ±0.05mm Lsdpfoh S H N Aox Akuehg Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Condition: excellent (used), Year of construction: 2008, table length 4000 mm table width 1500 mm burner heads 1 Lsdju N I Erjpfx Akushg Control SIEMENS 840D Capacity 6000 Watt speed 10 m/min weight of the machine ca. 19 t dimensions of the machine ca. 9,5 x 7,3 x 3,1 m This Trumpf TrueLaser Cell (TLC) 7040 with 6 KW is a 5-axis laser machine. Description: - Max. Sheet thickness: ST:20mm / VA:20mm / AL:15mm - Closed machine room - Laser TruFlow 6000 - ADC cutting head - Positioning laser diode - Suspended control panel stationary, rotatable - Teach panel - Magnetic coupling, head detection - Laser power control - Power cycles - Laser welding