Used Orwak Waste Baler Orwak 3325 for sale (3,262)

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Lhsdpfx Akjy R Npceujg Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Lhjdsy R Nnfepfx Akusg Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE certificate present: No - Serial number: 307 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Lodpfeym Uxtjx Akuehg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, total width: 1,300 mm, total height: 3,850 mm, total length: 2,200 mm, Colour: Grey Empty weight: 1.250 kg Price: On request - Year: 2005 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 308 - Transport dimensions: 2200mm x 1300mm x 3850mm (l x w x h) - Transport weight [kg]: 1250kg - Transport packages [pcs.]: 1 Financial information Lhsdpfx Aoyrtcuskueg VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Year of construction: 2026, functionality: fully functional, Complete Set of 20 Foil Waste Bags for Dust Extractors Bag dimensions: 800 × 1200 mm Designed for CORMAK dust extraction systems: FM300, Lodpey T E Umofx Akuehg FM300S, FM300SA, FM500,

Year of construction: 2022, operating hours: 2,500 h, condition: like new (used), functionality: fully functional, Waste Recovery and Sorting Line – Year 2022 Lhedpjy Snntsfx Akuog Complete line for the recovery and sorting of municipal and industrial waste, manufactured and installed in 2022, with very few operating hours and in very good overall condition. The installation is equipped with leading European brands, including: • PICVISA – ECOPACK EP-2000 and EP-1500 optical separators • NIHOT – WSF 800 and SDS 800 air density separation systems • SPALECK – Vibratory screen • GUNTER – SPLITTER UNIT 425 screening and separation • SPR – 1-rotor Pre-crusher shredder • FELEMAMG – Magnetic and inductive separators • ATLAS COPCO – GA37 VSD FF compressor • Large number of conveyor belts and feeding/storage silos Approximate operating hours range from 1,000 to 2,500 per unit, with the majority of components maintaining excellent operational condition. The facility can be purchased: • As a complete line, • As separate sections, • As individual units. This is a modern facility, equipped with high-performance optical sorting and air density separation technology, specifically suited for: • MSW (Municipal Solid Waste), • Packaging, • RDF/SRF, • Plastics, • Film, • Paper, and light waste recovery.

Condition: like new (used), Year of construction: 2022, operating hours: 1,635 h, functionality: fully functional, WINDSHIFTER: Separation of LDPE from the light fraction of SDS. Infeed material belt width 800 mm. Rotary air separator with a capacity of 17,000 m³/hour. Power 17.2 kW. Equipped with filter model BF104m. SDS: Single-drum separation system. For MSW separation. Infeed belt length 2750 mm, width 800 mm. Expansion room 6000 x 2400 mm. Power consumption 32.2 kW. Dimensions 11460 x 2400 x 6770 mm. Lhedpfx Akoy Smwajusg

Condition: used, Year of construction: 2013, operating hours: 3120 h, with loading fork Lodpfx Aey Rvm Iekuohg

Year of construction: 2018, condition: excellent (used), From 2018, 15 kW, with hopper and container PM 32-E (32 m3) and tipping device Lhedpfx Aksyti Ipeuog

Condition: like new (used), Year of construction: 2022, operating hours: 1,335 h, functionality: fully functional, For municipal waste. Spliter 425 unit: Width 2500 mm. Length 4000 mm. 16 shafts. Acceleration belt 3100 mm. Positioned at 25 degrees. Width 1200 mm, effective 1050 mm. Speed from 1 to 2.5 m/s. Total consumption 11 kW. Approximate dimensions: 6685 x 2720 mm. Height 676 mm. Approximate weight 9 t. Lhedpfoy Sgk Hjx Akueg

Condition: ready for operation (used), Year of construction: 2012, Brand: HSM Model: V-press 860 plus Year of manufacture: 2012 Pressing force: 532 kN Voltage: 400 V Max. bale weight: 480 kg (depending on material) Bale dimensions: 120 x 110 x 85 cm Machine weight: 2,083 kg Machine dimensions: 180 cm x 125 cm x 298.5 cm Lhodsy N Ratspfx Akusg Filling opening dimensions: 120 cm x 65 cm Condition: very good! Function-tested. Video of the machine in operation available on request. FLITS Rental & Sales service: with every machine we supply a bundle of tying wire (120 wires). Need more bundles? Request a non-binding quote.

Condition: good (used), functionality: fully functional, power: 187 kW (254.25 HP), fuel type: diesel, operation weight: 26,500 kg, Year of construction: 2012, The tractor is in working order. In good technical condition, without significant defects. More info on WhatsApp. Lodpsy Sgviofx Akuohg

Condition: ready for operation (used), Strautmann PP 1207 Ljdpora Aq Defx Akushg Pressure force 58 tons Baler weight from 400-500 kg depending on material 4KW engine Baler format (LxWxH): 1200 x 700 x 800 mm Feed opening: 1145 x 430 mm External dimensions (LxWxH): 1844 x 1067 x 2868 mm Feed opening: 1145 x 430 mm Transport height: 2500 mm baler weight approx. 2300 kg

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: PVF468787, pressing force: 30 t, input voltage: 400 V, bale weight: 300 kg, total width: 1,775 mm, total height: 3,225 mm, overall weight: 1,570 kg, total length: 1,025 mm, filling opening width: 1,200 mm, filling opening length: 560 mm, noise level: 63 dB, bale width: 1,200 mm, bale length: 800 mm, bale height: 950 mm, transport height: 2,300 mm, electrical fuse: 16 A, Used BRAMIN B30 plastic/cardboard baler in very good condition and ready for use. Baler type B30 VD/HS with sliding door and high-speed, including BRA-IN Pressing force: 30 t Feed opening (W x H): 1200 x 560 mm Electric drive: 400 V / 4.0 kW / 16 A Noise level approx.: 62-64 dB Cycle time: 35 sec. Lhsdey Nnclspfx Akusg High press chamber: 1560 mm Long piston stroke: 750 mm Dimensions (W x D x H): 1775 x 1025 x 3225 mm Transport height approx.: 2770 mm Machine weight approx.: 1570 kg Bale size (W x D x H): 1200 x 800 x 950 mm Bale weight approx.: 280-400 kg (depending on material) Sale only to commercial customers, warranty excluded.

Condition: excellent (used), Manufacturer: Strautmann Model: PP 1207 Plus Bale size (LxWxH): 1200 x 1100 x 730 mm Bale weight: approx. 400 - 500 kg External dimensions (LxWxH): 1850 x 1047 x 3079 mm Transport height: 2500 mm Ljdpfx Ajv Aiymekujhg Filling opening: 1190 x 600 mm Pressing force: 59 tons / 580 kN Throughput: 1 - 2 bales/hour Number of ties: 4 Press weight: 2300 kg Power supply: 400 V / 50 Hz Power consumption: 4 kW Installation location: covered indoor/outdoor Noise level: less than 80 dB(A) Year of manufacture: 2003-2005 I also have Strautmann PP 1207 balers from 2009-2011, price 5,500 EUR Also available: Strautmann PP 1208 balers from 2014-2015 Strautmann AutoLoadBaler year 2018, price 7,500 EUR

Condition: used, Effluent plant for waste water treatment. Includes: - Mixing and equalisation tanks 1, 140 m3 - Mixing and equalisation tanks 2, 40 m3 - Mixing and equalisation tanks 3, 80 m3 - Bioreactor 1, 240 m3 - Bioreactor 2, 240 m3 - 2 air compressors for aeration in the reactors - Secondary sedimentation tank 1, 100 m3 - Secondary sedimentation tank 2, 100 m3 - Thin sludge tank, 70 m3 - Thick sludge tank, 90 m3 - Sludge dewatering 1 and 2 - Precipitant tank, 25 m3 - Various process water pumps Bioreactor capacity 2 x: 240 m3 Operation / Control: Siemens Simatic S7 Lhsdpfx Aovcql Rjkujg Features: Mixing and equalisation tank 1, 2 & 3; Pumping station 1 - inlet bioreactor; pumping station 2 - inlet bioreactor; bioreactor 1; bioreactor 2; pumping station - outlet bioreactors; 2 x air compressor; Precipitant tank; filling unit; 2 x flocculent mixing station; secondary sedimentation tank 1 & 2; mixing tank; thin sludge tank; 2 x sludge dewatering; thick sludge tank

Year of construction: 2015, condition: used, Waste water neutralisation Lsdexbqr Djpfx Akushg Capacity: 8 m3/h Operation / Control: Control cabinet with touch-screen display / WAGO Features: Neutralisation vessel (37 hl); final control vessel (4,5 hl); caustic vessel; acid vessel; pumps; process measurement, instrumentation and control technology; control cabinet

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 58900538, input voltage: 380 V, total width: 1,200 mm, total height: 2,300 mm, overall weight: 470 kg, total length: 850 mm, filling opening width: 830 mm, bale width: 830 mm, bale length: 600 mm, bale height: 650 mm, opening width: 830 mm, transport height: 2,300 mm, Machine fully functional, but the press plate is deformed and needs to be straightened (see photo). The machine is sold together with strapping bands for bundling the bales and a sack truck for transporting the bales. Pick-up only, no delivery and no warranty. Ljdpfxey Hlg Ns Akuehg

Condition: excellent (used), Baler Hsm V-Press 825 plus Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading opening width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Ljdev Akciopfx Akujhg Type of consumables: strapping tape Compressed material: foil, mixed paper, cardboard, die-cutter waste, clothing Years 2012-2014 price 6000eur Baler Hsm V- Pres 825 pro 2019-2021 costs 9,000eur

Condition: new, Mobile Cleaning Centrifuge ZS21-M EUR – Efficient Process Water Treatment | Made in Germany The ZS21-M EUR from Eurotec Innovation is the ideal solution for economical and sustainable solid-liquid separation in industrial applications. Thanks to its mobile design and plug-and-play system, this unit (new machine) is ready for immediate use and can be flexibly deployed in a wide range of production environments. Perfect for companies looking to reduce operating costs while optimizing their processes. Numerous additional variants and custom designs available on request. Machine type: Process water centrifuge (solid-liquid) Manufacturer: Eurotec Innovation GmbH Model: ZS21-M EUR Applications: Vibratory finishing, general solid-liquid separation, coolant (metalworking fluid) treatment, wet blasting systems, etc. ⚙️ Technical Data: Cleaning capacity: up to 30 liters/min Speed: approx. 4,160 rpm Centrifugal force: up to 2,070 g Drive power: 1.5 kW Dirty water tank: approx. 99 liters Clean water tank: approx. 93 liters Voltage: 380 V / CEE 16A Ledpfx Aksf Sqfqsujhg Your Benefits at a Glance ✔ Maximum mobility thanks to integrated trolley ✔ Compact design – flexible use in any production environment ✔ Extremely high separation performance due to >2000 g centrifugal force ✔ Significant cost savings through a closed water circulation system ✔ Reduced use of chemicals (e.g. compounds) ✔ Plug & Play – ready for operation within minutes ✔ Designed for continuous operation – high availability ✔ Environmentally friendly solution through resource conservation 🏭 Typical Applications: Vibratory finishing / tumbling Metal processing & metalworking fluids Wet blasting systems Washing, coating & phosphating processes Cleaning of emulsions & suspensions General industrial liquids Equipment: Dirty water buffer tank with agitator Double diaphragm compressed air pump PLC control system & automated operation Modular expandable & customizable From development to production, we supply all products from a single source – all “Made in Germany.” ----- We are happy to provide individual consultation and prepare a suitable offer. Simply send a non-binding inquiry! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). This offer serves solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal along with legal notice details, before any purchase/contract conclusion is made.

Condition: ready for operation (used), Model: HSM V-press 1160 plus baler Pressing force (kN): 532 Bale weight depending on material: up to 550 kg Max. bale size (mm): 1200x1100x1000-1200 Dimensions L x W x H (mm): 1780x1150x2985 Power (kW): 7.5 Weight (kg): 2300 Year 2007-2010, price: 5800 EUR Year 2011-2013, price: 6000 EUR YEAR 2018 COSTS 6000 EUR We also have HSM V-press 1160 max balers from 2014-2015 available. Lsdpfxsra Nyuj Akujhg

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: MM1007, bale length: 880 mm, bale height: 600 mm, pressing force: 500 t, Taurus shear baler model E 556.P, year 2015, in excellent working condition and complete with documentation. This machine is ideal for baling and shearing all types of ferrous scrap: profiles, sheet metal, bulky mixed scrap, and vehicles. Technical data Shearing force: 500 tons Shearing width: approx. 950 mm Shearing height: approx. 640 mm Box length: 5,600 mm Open box width: 2,400 mm Bale size (closed): Width: 880 mm Height: 600 mm Features Soundproofed 125 HP diesel engine Operator cabin Radio remote control Complete documentation Lhodpfey Iblwjx Akuog Machine ready for operation.

Condition: ready for operation (used), Baler Hsm 155 VL Bale dimensions L x W x H: 1100 x 700 x 700 - 950 mm Bale weight: 2000 - 250 kg (Cardboard) Technical data: L x W x H: 1470 x 940 x 2259 / 2439 mm Weight: 950 kg Pressure force 16 tons Power supply: 400 V (three phases) Motor power: 4 kW Bale ejector Hsm 155.1 VL baler Lhjdpfxora Nrms Akusg pressure force 18 tons Price of Hsm 155.1 VL baler - 2600eur Hsm 155.2 vl baler pressure force 16 tons Price of hsm 155.2 vl baler - 2800eur

Condition: good (used), Year of construction: 1981, functionality: fully functional, Equipment: documentation/manual, Automatic channel baler BOA Continu 25 LB + conveyor belt. The baler is in good condition and has been regularly serviced. Recently, the Denison pump underwent a complete overhaul. Fully functional and in continuous operation. Please contact us for further information. Lhjdsw S Tv Ujpfx Akueg

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included. Ledpsy Ehl Ejfx Akuehg