Used Sabroe V316 Aft for sale (1,277)

Condition: used, Year of construction: 2016, Suction capacity approx. 850 l/min Filling capacity approx. 680 l/min Compressed air tank 10 bar Tank capacity Tank capacity 2 x 100 l Tank surface galvanized Dedpfx Aey Ifmrektokn Mounted on safety base plate Including refrigerated dryer, fine filter, automatic condensate drain

Condition: used, Year of construction: 2013, functionality: fully functional, machine/vehicle number: AS7031917, power: 4 kW (5.44 HP), volume flow: 600 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, noise level: 93 dB, Equipment: type plate available, Portable piston compressor, lightly used, in good condition. We bought it new in 2014 and had to convert to a screw compressor. The unit has always performed its job. Delivery to the Berlin-Brandenburg area is possible. At no additional cost to the buyer! Dsdpewak N Ajfx Aktjkn Demonstrations and test runs are available on-site.

Condition: new, Clean air extraction / dust extractor Dedpor A Eq Refx Aktskn Dust-tested to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with low space requirement Maximum performance in this class Very quiet Designed for commercial use Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right for flexible use Large inspection openings Large, mobile chip container with clamping bracket and chip collection bag Dust extractor already fully assembled on delivery, so can be used quickly All models are mobile Polyester fleece filter material, aluminized, therefore with long service life Antistatic filter tested and approved to category M-BIA as standard The fan is connected downstream of the filter Efficiency class extraction motor IE3 Nominal volume flow 1448 m³/h Nominal negative pressure 2242 Pa Power drive motor 2.2 kW, 400 V, 50 Hz Chip collection volume 2 x 165 l Nominal width of external suction connection inlet 160 mm Filter area 9.21 m² Residual dust content < 0.1 mg/m³ Sound pressure level max. 73 dB(A) L x W x H approx. = 1618 x 830 x 1653 mm Weight approx. 268 kg VERSION PM Automatic filter cleaning with pneumatic system that moves a scraper frame

Condition: reconditioned (used), Motor 5 kW electric height adjustment with digital display brake can be released electrically for knife change planer cutter shaft 520 mm Dedpfey Hkzfex Aktokn manual feed speed 5-8-12-18 m/min start and stop buttons at front and rear planer table length 2250 x 540 mm manually adjustable fence with angle function sliding planer shaft guard

Condition: new, Year of construction: 2025, machine/vehicle number: 011/2020, STK-10000i is low-cost vacuum system from SAF TEKNIK and it offers very good filtration with a lot of power and airflow! It includes multiple filter columns and filter cleaning through vibrating. It also has a separator for bigger parts, which prevents damage to the whole system. TECH. SPECIFICATION: - Motor power: 11 KW - NEW: Frequency inverter for main motor - Exhaust capacity: 10000 m3/h - Air speed: 41 m/s - filter area: 30 m2 - bin volume: 810 Liters - exhaust inlet diameter: 355 mm Djdpfsf D S Trox Aktskn - weight: 740 kg - dimensions: 3170 mm X 1200 mm X 2330 mm OTHER VERSIONS, also available: - STK-6500 (6500 m3/h) - STK-8000 (8000 m3/h)

Condition: new, Year of construction: 2026, TECHNICAL DATA Pressing force 30t max. load prism jaw 7.5t piston stroke 160mm piston travel 550mm Dimensions and weights length (product) approx. 1240mm width/depth (product) approx. 650mm Dsdpfx Akji Amnpjtskn Height (product) approx. 1920mm Weight (net) approx. 280kg Clear width 790mm Installation height max. 1030mm Frame depth 200mm SCOPE OF DELIVERY 2-part prism set for inserting round material Hand and foot lever Winch for lifting and lowering the table Location: Ex works - available at short notice -

Condition: used, Year of construction: 2021, sheet width 2020 mm plate thickness 1,5 mm 135 ° 100 mm total power requirement 1 kW weight of the machine ca. 965 kg dimensions of the machine ca. 2680 x 640 x 1100 mm NEW PRICE: 9,990 EURO Description: - Foot operation enables positioning of the sheet metal with both hands Dkedoy Erw Eopfx Aktjn - Workpiece clamping and bending process are motorized via a chain drive - Manual adjustment of the bending angle, reading of the angle on a scale ring - Many bending options with segmented upper beam - Precise movement of the bending beam via large flat guides - Heavy, robust welded construction

Condition: new, Year of construction: 2025, Pre-milling unit: yes Pre-milling material removal: 0 - 2 mm Plastic edges: 0.4 - 3 mm Solid wood edges: 0.5 - 5 mm Workpiece thickness: 8 - 50 mm Dodpfol D Rx Ujx Aktokn Minimum workpiece length: 120 mm Minimum workpiece width: 110 mm Anti-adhesive spray unit: yes Edge preheating device: yes Glue application unit: Granulate / quick-change glue tank kit End trimming unit: yes Flush end trimming unit: yes Corner rounding unit: yes Flush radius trimming unit: yes Radius scraper unit: yes Flat scraper unit: yes Buffing unit: yes Cleaning spray unit: yes Power consumption: 5 kW Machine length: 3,774 mm Machine width: 1,546 mm Machine height: 1,337 mm Weight: 842 kg

Condition: not inspected (used), functionality: unexamined, No reserve price – guaranteed sale to the highest bidder! Submitting a bid obliges timely collection between 23/06/2026 and 26/06/2026! Auction of three workshop cabinets! TECHNICAL DETAILS Dkodpfx Aksy D Rxljtsn Dimensions per cabinet: 950 x 500 x 1,950 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 3,000 x 500 x 1,950 mm Weight: 300 kg External reference: 59

Condition: new, Year of construction: 2024, Classical extraction system with powerful motor, big metal waste bins and multiple filters for big filtration area which are closed inside the bin for protection. It also includes a big-particle separator to prevent damage to the whole system. TECHNICAL SPECS: - Motor power: 7.5 kW + electronic control (inverter) - Air flow: 6500 m3/h - Air speed: 32m/s - filter area: 21 m2 - waste bins volume: 450 liters - weight: 450 kg Dsdpfxof D S T Ij Aktekn - inlet diameter: 300 mm - Dimensions: 2400 mm X 1160 mm X 2310 mm

Condition: good (used), Year of construction: 2015, Double edging saw with electric adjustment via joystick or programming (manufacturer Weintek Austria). Alignment of the beam through 3 cross chains (can be controlled individually or synchronously). Max. cutting length 4.2 m. Kerf display with 2 lasers. Saw motors each 6.5 kW. Max. cutting width 0.6 m. Max. cutting height 80 mm. Max. cutting height 60 mm. Djdpewy Hv Ejfx Aktskn

Condition: excellent (used), Year of construction: 2022, Holzkraft Raw Air Extraction System Type: ASA 7703 For milling, planing, and saw chips (not suitable for dust) The 180° rotatable extraction unit allows suction guidance from below or above Robust metal impeller Equipped as standard with a high-quality mobility kit for increased stability and easy maneuvering Quick-release fasteners for filter and chip bag Dimensions and Weights: Length (approx.): 1900 mm Width/Depth (approx.): 670 mm Height (approx.): 2800 mm Net weight (approx.): 88 kg Chip collection volume: 2 x 290 l Outer diameter of inlet extraction nozzle: 260 mm Dodpfx Akoy Ahpxstjkn Outer diameter of outlet extraction nozzles: 3 x 120 mm, 1 x 100 mm Electrical Data: Motor speed: 2950 rpm Connection voltage: 400 V Power supply frequency: 50 Hz Input power: 4.8 kW Output power: 3.8 kW Filter: Filter area: 2 x 5.98 m² Noise Emission: Maximum sound pressure level: 98.3 dB(A) Airflow: Nominal airflow: 7700 m³/h Maximum negative pressure: 2800 Pa Location: Available from stock, 54634 Bitburg - Immediately available -

Condition: new, Year of construction: 2026, functionality: fully functional, Robotic CNC Workstation – SINUMERIK ONE We offer a robotic workstation equipped with an industrial robot featuring a reach of 3000 mm, controlled by the Siemens SINUMERIK ONE CNC system, suitable for a wide range of applications: • Grinding • Milling • Finishing • Large-format 3D printing • Machining The workstation can be expanded with: • Workpiece positioner • Linear robot track for increased working area We deliver turn-key solutions fully customized to customer specifications. Robot tooling is always designed and quoted individually according to the specific application. Accuracy and Kinematics: We offer various configurations based on the required machining accuracy. Our solutions utilize MABI kinematics with direct measurement, enabling high precision even when machining materials such as steel. For less demanding applications, we offer a more cost-effective Comau kinematics option, suitable for machining wood and plastics. Safety Solutions: • Fencing with the Haberkorn system • Or fully enclosed workstation housing Dkedjy D N Acopfx Aktjn

Year of construction: 2026, condition: new, functionality: fully functional, Robotic Grinding and Polishing Cell – CNC Control SINUMERIK ONE We offer a modern robotic cell designed for precise and efficient grinding and polishing operations using CNC control. An ideal solution for production automation and achieving consistent, high-quality surface finishes. Key features: Industrial robot with a 3000 mm reach Fully enclosed safety cell Control system Siemens SINUMERIK ONE HT2 operator panel 22" touchscreen interface for intuitive operation Programming and control: Programming via NC code (standard CNC) Shopfloor programming: ShopTurn ShopMill Capability to program using standard CAD/CAM systems Intuitive program creation directly on the machine – no CAM required Processing technology: High-performance grinding spindle PushCorp (power selectable based on application requirements) Dedpfx Aey D Nwtektjkn Optional extensions: Integration of a rotary table (positioner) إمكانية إضافة linear axis to extend the working envelope Option to integrate a machining spindle with automatic tool changer (ATC) Fully customizable based on customer-specific applications Benefits: High repeatability and consistent surface quality Combination of robotics and CNC control in one system Flexibility for grinding, polishing, and subsequent machining in a single setup Wide range of programming options (NC, shopfloor, CAD/CAM) Easy operation thanks to shopfloor programming Ready for Industry 4.0 integration

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 5 h, power: 5 kW (6.80 HP), input voltage: 400 V, pivoting range: 45 °, rotational speed (max.): 10,000 rpm, rotational speed (min.): 3,500 rpm, table width: 530 mm, table length: 1,200 mm, overall weight: 510 kg, tool diameter: 240 mm, Equipment: CE marking, Professional woodworking machine with tilting milling spindle and cantilever arm. Exhibition machine like new - used only for demonstration purposes Milling unit made from cast iron, tiltable up to -45° backwards Four milling speeds from 3500 to 10000 rpm Forward and reverse rotation Height and tilt display accurate to 0.1 mm Quick speed change via eccentric clamping Powerful 5.0 kW industrial motor Curved milling hood included Made in Italy Milling spindle tilt 0 – -45° Usable spindle length 125 mm Spindle speeds 3500/6000/8000/10000 rpm Speed indication via LED display on the front panel Spindle shaft diameter 30 mm Max. tool diameter 240 mm Max. retractable tool diameter 230 mm Max. tenoning tool diameter 320 mm Dksdpfeyn Ny Usx Aktsn Accessories included: Mitre fence with two flip stops Eccentric clamp Curved milling safety guard Additionally, adjustable system fence jaws The machine can be inspected and tested at any time at the Chemnitz location.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy format circular saw with scoring unit and Siemens three-axis control Hanging control panel with Siemens control and 10" touch display Control of the saw blade height/inclination and positioning of the parallel stop via the control panel Max. cutting height 200mm Scoring device with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 min¯¹ High weight ensures vibration-free operation Large outrigger table with material roll Extendable aluminum longitudinal stop with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding carriage with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard with table extension and table extension made of sheet steel Dedpsvmfawjfx Aktokn Large pendulum protection hood conveniently operated using a gas pressure spring can be swiveled up Saw blade clamped via tool-free Rapid system The panel saw is set up in our demonstration center in Chemnitz. It is new and in an unused condition. We are happy to help with transport, assembly and instruction.

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Dsdpfx Aeyn Ertsktjkn Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.

Condition: ready for operation (used), Year of construction: 2022, overall weight: 2,600 kg, total width: 2,730 mm, total height: 1,280 mm, cutting length (max.): 2,100 mm, CNC shearing machine manufactured in 2022. This Metallkraft MTBS 2100-40 B features a cutting length of 2100 mm and a motor power of 7.5 kW. It can handle a maximum sheet thickness of 4 mm at 400 N/mm². If you are looking to get high-quality shearing capabilities, consider the Metallkraft MTBS 2100-40 B machine we have for sale. Contact us for further details. • Motor power: 7.5 kW • Max. sheet thickness (400 N/mm²): 4 mm • Max. sheet thickness (700 N/mm²): 2.5 mm • Back stop: 750 mm • Cutting angle: 1.8° Dedpsyz Sl Iefx Aktjkn • Number of cuts per minute: 38 • Electrical connection: 400 V • Condition/usage: Low hours; used for around 2 years

Condition: excellent (used), model : RLA200 Dodpjv Rnpcofx Aktekn

Condition: like new (used), Year of construction: 2020, Metallkraft Sickenbiegemaschine SBM 140-12 E Motor-driven bead forming machine with machine base, control console, and stop plate for producing various bead profiles and depths. Roller length: 140 mm Bending capacity steel 400 N/mm²: max. 1.2 mm* Djdpfx Ajxqp R Rektskn Rollers: Ø 62 mm Throat depth: 100 mm Roller speed: 8 m/min Motor power: 0.75 kW | 400 V - 50 Hz Protection class: IP 55 Dimensions (LxWxH): 900 x 1350 x 450 mm Weight (net): approx. 110 kg Includes standard rollers S1-S8 and tool key Demonstration machine, used once

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 3 h, functionality: fully functional, machine/vehicle number: PG-D 1100 X-TEA, type of cooling: water, fuel: diesel, nominal power: 8 kW (10.88 HP), Equipment: chassis, Year of manufacture: 2022 Only 3 operating hours Includes wheel set Self-collection only Continuous output (active power): 5.4 kW at 230V / 8.0 kW at 400V Socket configuration: 1 x 230 V, 16 A / 1 x 230 V, 32 A / 1 x 400 V, 16 A - Sound-insulated diesel engine (compliant with noise and emission regulations) - Ergonomically positioned connections at the front in a control panel with voltmeter and hour meter - Full enclosure provides spray and impact protection - Electronic voltage regulation (AVR) - Thermal-magnetic circuit breaker protects against overload and short circuit due to faulty consumers or cables - Safe personnel protection via insulation monitoring (device does not require grounding) Dodpfx Aksu D Abwotskn - Low-oil shutdown - Long operating times thanks to large 24 L fuel tank - High convenience with electric start - Water-cooled engine - Quality 'Made in Europe'

Condition: new, Year of construction: 2026, functionality: fully functional, CNC Milling Machine startech cn k with Store Equipment BRAND NEW MACHINE Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm. Spindle drive via a powerful 2.4 kW motor. Intuitive, user-friendly machine software for PC included, featuring an open interface compatible with various CAD/CAM programs. Technical Data: - Work table: 760 x 1170 mm - Spindle speed: 24,000 rpm - Maximum workpiece dimensions X: 915 mm - Maximum workpiece dimensions Y: 610 mm - Maximum workpiece dimensions Z: 176 mm - Number of drilling spindles: 1 - Maximum tool diameter: 60 mm - Maximum travel speed X-axis: 5 m/min - Maximum travel speed Y-axis: 5 m/min - Maximum travel speed Z-axis: 2.5 m/min - Suction connection nominal diameter (external): 40 mm Includes: - 5 pneumatic suction cups For positioning on the work table Simple workpiece clamping - Pneumatic working pressure: 6.5 bar - Compressed air requirement: 120 l/min Incl. wetCAT 141 RS-TOOL M-Class Wet & Dry Vacuum Cleaner by CLEANCRAFT - For extraction of dust from, e.g., hardwood, plaster, paint, concrete - Automatic filter cleaning - Air volume: 4560 l/min - Dust class: M - Container capacity: 41 l - Hose diameter: 33 mm - Sound pressure level: 74 dB(A) - Power input: 1.1 kW - Max. device socket connection: 2.4 kW - Connection voltage: 220 – 240 V Dedpjyx Dzvofx Aktjkn - Mains frequency: 50 / 60 Hz List price (RRP): €14,789.00 Available at short notice Shipping available at additional cost

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times Dksdpsyy Tp Ssfx Aktjn - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm Dkedpfx Akox Hbruotsn - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Aluminium platform ladder with three-sided platform guardrail, featuring knee and toe board. Platform depth: 800 mm Platform width: 600 mm Tread depth: 80 mm Frame material: aluminium Mobile, wheel diameter: 100 mm Wheel equipment: 2 fixed castors Platform height: 1660 mm Including platform: 7 steps Overall construction height: 166 cm platform + 110 cm guardrail Dodpfxsyctvce Aktskn Weight: 40 kg Width: 1510 mm Depth: 1510 mm Accessories: 2 handrails Shipping: disassembled, possible. Assembly instructions included.