Used Ambold Eerh 100 for sale (24,093)

Condition: ready for operation (used), Indramat KDS 1.3-100-300-W1 Controller SN:253759-02159, used, normal signs of use, 100% functional, scope of delivery as per photos Dkedpfx Akoi Ebiuoton

Condition: new, Indramat KDV 2.2-100-220 / 300-W1 Power Supply, SN:234691-00754 A08R1, unused in opened original packaging, 100% functional, scope of delivery as per photos Dodpfx Aoi Ebi Rjktjkn

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC-Mainspindle Drive SN230902774878005, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Dkedpotvctxefx Aktsn

Condition: new, AEG Modicon AM-C 916-100 CPU card S/N 0007107, unused, 100% functional Djdpfji D Tu Ajx Aktjkn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1-220 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Dedpfei Ebhwex Aktskn

Condition: ready for operation (used), Indramat TDM 1.2-100-W1-SO102 A.C. Servo Controller, serial no. as per photo,used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos,The agreed sales discounts do not apply to this item. Please ask for price separately Dsdpfx Akei Ebnyjtokn

Condition: new, Franz Kessler DM 100 / 2 LX three-phase asynchronous motor, SN:190072 ,unused in opened original packaging, 100% functional, scope of delivery according to photos Dkedpfei D H S Ujx Aktsn

Condition: new, Franz Kessler DMR 100.52.4.R0H Three-phase asynchronous motor, SN:187242 ,unused, 100% functional, scope of delivery according to photos,ATTENTION: Please ask for charges for packing and transport separately! ATTENTION: Please enquire for charges for packing and transport separately! Dkjdpfx Aksi D H Tnetsn

Condition: new, GMN TSE 100cg-6000 / 1.25 high-speed spindle SN:R358699, unused, 100% functional, scope of delivery as per photos Dkedpei D U U Tofx Akton

Condition: new, GMN TSE 100cg-6000 / 125 high-speed spindle SN:R358399, unused in opened original packaging, 100% functional, scope of delivery as per photos Dkedpfxji Eaabe Aktsn

Condition: ready for operation (used), Indramat KDS 1.1-100-300-W1 AC. Servo controller, serial no. according to photo, used, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery according to photos. Djdpfx Aksi Ebhhstskn

Condition: ready for operation (used), Indramat KDV 1.3-100-220/300-W1 Power Supply SN23226473930903, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photo Dkjdpfei Ebi Ajx Aktsn

Condition: new, Indramat KDV 2.2-100-220 / 300-220 Power Supply, SN:234691-02932, unused in opened original packaging, 100% functional, scope of delivery as per photos Dkodpfsi Ebi Hex Aktsn

Condition: used, Year of construction: 1995, Welding Fumes Extractor CAPTAIR type 100 Year of construction: 1995 Voltage: 380 V Tubing Length: 3000 mm Width: 600 mm Depth: 500 mm Djdpfx Aszb Dx Eoktokn Total height: 1300 mm

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, hydraulic flat cylinders -Manufacturer: Pfaff, hydraulic cylinder short-stroke heavy-duty cylinder -Stroke: 20 mm -Piston rod: Ø 64 mm -Operating pressure: max. 700 bar Dkodpfewuqdijx Akten -Number: 2x cylinders available -Price: per piece -Dimensions: 310/150/H85 mm -Weight: 13.4 kg/piece

Condition: used, axle configuration: 3 axles, first registration: 07/2023, total width: 2,550 mm, total height: 900 mm, Year of construction: 2023, Rear axle 1: Double wheels; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70% Rear axle 2: Double wheels; Tyre profile left inner: 50%; Tyre profile left outer: 50%; Tyre profile right outer: 50%; Tyre profile right outer: 50% Rear axle 3: Double wheels; Steering; Tyre profile left inner: 80%; Tyre profile left outer: 80%; Tyre profile right outer: 80%; Tyre profile right outer: 80% Empty weight: 9.728 kg Dkodpfx Aezbaq Rektsn Carrying capacity: 39.772 kg GVW: 45.000 kg Registration number: 018502 Total length 1260 cm long Bed 840 cm Extendable 450 cm

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, year of last overhaul: 2025, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Dkedpfsvf E Avox Aktjn Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: used, machine/vehicle number: 51568, pressure:100 t Dkjdpfxecxxrrs Akten stroke:0-500 mm table surface area:800 x 650 mm ram surface:800 x 600 mm hole in the table:355 mm table height over floor:800 mm dayligth:1130 mm weight of the machine ca.:5,7 t throat:310 mm space requirements approx. LxWxH:1,2 x 2,0 x 3,67 m

Condition: used, Tool holder shaft type:HSK-A 100 Tool holder shaft type:Wohlhaupter Tool holder shaft type:Feindrehwerkzeuge Ausdrehkopf / Precision Turning Dkedpfjg Nqlijx Aktsn Big selection of Wohlhaupter HSK-A 100 Tool holders / precision turning tools / adapters /extenders etc. for sale Sales list with prices upon request.

Condition: used, Year of construction: 1994, pressure:100 t throat:280 mm piston stroke:300 mm table-size:1000 X 600 mm dimension of ram:600 X 400 mm total height over floor:300 mm length in width:1200 mm voltage:380 V weight of the machine ca.:4 t Dedpfx Aet Hmk Hjktskn

Condition: used, Year of construction: 1992, machine/vehicle number: 920544, current capacity:100 kVA throat:280 mm capacity at 50%:100 kVA pressure:1,1 t stroke:100 mm table-size:180 x 170 mm control:MPS-29-K-S-R total power requirement:279 kW weight of the machine ca.:1,3 t dimensions of the machine ca.:1,4 x 1,15 x 2,1 m Dkodpfxecxxwnj Aktjn spot-welding machine with Nimak micro-processor MPS-32-K control, water-cooled, opto-electronic safety curtain, emergency cut-off

Condition: new, RHTC 100 TON M/H-M/C-2 Hydraulic Press Model 100 TON M/H-M/C-2 Year 2025 Condition New Stock Number 2796 Working Width 1000 mm Dkjdpfx Ajxwk E Aekton Stroke 380 mm Max Capacity 100ton

Condition: used, Year of construction: 1957, pressure 100 t throat 315 mm stroke 30 - 160 mm no. of strokes 40 /min distance table/ram, max. stroke up, adjustment up 460 mm table surface area 910 x 680 mm Hole in the table 400 mm table height over floor 800 mm passage to the back 400 mm ram surface 630 x 400 mm Dkjdpfxevzxnwe Aktsn ram adjustment 80 mm power requirement 7,5 kW weight 7,5 t dimensions (WxDxH) 1,7 x 2,0 x 3,0 m SPECIAL DEAL as is where is WITHOUT putting into operation / WITHOUT additional work free loaded to truck

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm Dsdozcc Rcjpfx Aktokn - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 678 mm, turning diameter: 175 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 330 mm, travel distance Y-axis: 40 mm, travel distance Z-axis: 1,040 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 6 m/min, rapid traverse Z-axis: 40 m/min, total height: 2,565 mm, total length: 3,799 mm, total width: 2,100 mm, type of input current: three-phase, overall weight: 10,000 kg, spindle nose: A2-6", CNC Lathe Nakamura NTJ-100 TECHNICAL CHARACTERISTICS: Year of manufacturing: 2013 Djdpfxjy U Uppj Aktskn CNC control: FANUC 31i-B-NT-IPS Colour touch screen: 19 ["] Distance between spindles: 910 [mm] Max. cutting diameter: 175 [mm] Max. turning lenght: 678 [mm] Stroke Z1 axis: 1040 [mm] Stroke X1 axis: 330 [mm] Stroke Y1 axis: +/- 40 [mm] Stroke Z2 axis: 678 [mm] Stroke X2 axis: 127.5 [mm] Stroke Y2 axis: +/- 32.5 [mm] B axis swivelling stroke: 182 [°] Rapid traverse rate X axis: 20000 [mm/min] Rapid traverse rate Z axis: 40000 [mm/min] Rapid traverse rate Y axis: 6000 [mm/min] Spindle nose: A2-6" Max. bar diameter: 65 [mm] Max. spindle speed: 4500 [rpm] Increment C-axis: 0.001 [°] Spindle power: 11 [kW] Counter spindle nose: A2-5" Max. bar diameter counter spindle: 42 [mm] Max. counter spindle speed: 5000 [rpm] Counter spindle increment C-axis: 0.001 [°] Counter spindle power: 7.5 [kW] Number of tool stations - Turret 1: 24 Number of tool stations driven - Turret 1: 12 Max. speed driven tools - Turret 1: 6000 [rpm] Number of tool stations - Turret 2: 24 Number of tool stations driven - Turret 2: 12 Max. speed driven tools - Turret 2: 6000 [rpm] Live tools power: 7.1 [kW] Total power required: 77 [kVA] Supply voltage: 400 [V] Machine dimensions: 3799 x 2100 x 2565 [mm] Weight: 10000 [Kg] More information upon request.