Used Ceramic Backings for sale (3,469)

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Back gauge depth: 415 mm MACHINE DETAILS Lhjdpjy Rxy Defx Akujg Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Lhjdpfoixqg Nex Akueg Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: excellent (used), Year of construction: 2024, Mfd. 2024 Chip Blaster High Pressure pump 8 Port Programmable High Pressure Manifold 1000 PSI 12 Port Coolant Manifold with Shut Off Valves Parts Catcher Sub Spindle & Back Working Attachment Spindle Drive Motor: 5.00 Nm (Nominal Torque) Max. Speed: 5000 RPM Feed Motors (X & Z): 2.1 Nm3000 RPM (X Has Break) Travel Z: 7.874″ Stroke Rapid Feed Rate: (Z) : 1000 IPM Travel X: 4.375″ Stroke Rapid Feed Rate (X): 200 IPM Cross Slides Motors: 2.1 Nm, 3000 RPM ( 4th X Motor Has Break) 1st Travel: 2.625″ Stroke 2nd Travel: 2.000″ Stroke 3rd Travel: 7.400″ Stroke 4th Travel X: 1.750″ Stroke 4th Travel Z: 4.062″ Stroke Rapid Speed: 200 IPM Specs to be verified by purchaser Lhodpfjyzkbhjx Akuog

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Ljdpfx Ajh I Euaokujhg Noise Tamer Sound Enclosure Refurbished and Ready to Run Several similar machines available

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Lhjdpfx Akowcfgbeujg Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Lhsdpfx Aoyf Ncqskueg Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: good (used), machine/vehicle number: 224194-0451, Euroturn (ZPS Mori-Say) 6-32 rebuilt multi-spindle screw machine SN: 224194-0451 6 Spindles 32mm Capacity Voltage: 480v With Spindle Stopping Siemens Control System Pickoff and Back Finish Stock Reel Cover and Stand Sedimentation Tank Upgrade: Servo Feed Drive in place of main spindle drive Upgrade: Repair Drum Path Quality Inspection Report Machine Install 1-Year Warranty Turnkey Available Lhedpstic Hqofx Akuog Call for more information

Condition: excellent (used), Year of construction: 2019, 2019 Holz-Her 7017K CNC Machining Center Ljdsy Symnopfx Akushg Serial Number: 207/1-903; Series: BAZ19V2; Machining Dimensions (Edge Routing): in X=3.540 mm / in Y = 1.287 mm (minus cutter radius): Cutter unit: 6.5 kW ceramic bearings, 1.000 - 18.000 RPM; Vector speed: 100 m/min; Protection equipment: Light grid (1-field machining); Workpiece support: 6 consoles, incl. 8 stops, Laser pointer; Drilling head: 14 Spindle (10V | 4 H), Incl, sawing unit for grooving in X-direction; Workpiece clamping: 100 m3/h vacuum pump, low maintenance dry-running pump; Tool changer: 12-compartment Pick-up tool changer with tool cover; Software: CAMPUS software package, incl. aCADemy, CAD/CAM module.

Condition: used, mileage: 176,116 km, power: 162 kW (220.26 HP), first registration: 03/2009, fuel type: diesel, tire size: 245/70r17,5, axle configuration: 4x2, wheelbase: 4,100 mm, fuel: diesel, gearing type: mechanical, number of gears: 6, emission class: euro4, suspension: steel, loading space length: 4,700 mm, loading space width: 2,400 mm, loading space height: 800 mm, Year of construction: 2009, Equipment: electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 4.800 cc GVW: 12.000 kg Drivetrain Drive: Wheel Make of engine: Renault Axle configuration Lhodpoy Tukwsfx Akujg Tyre size: 245/70r17,5 Suspension: leaf suspension Rear axle: Double wheels Functional Make of bodywork: WAF Tipper: Back = Additional options and accessories = - PTO - Tipper hydraulics

Condition: used, axle configuration: 3 axles, first registration: 05/1997, total length: 10,550 mm, total width: 2,550 mm, suspension: air, tire size: 385/65, tire condition: 30 %, wheelbase: 7,550 mm, color: other, Year of construction: 1997, Equipment: ABS, = Additional options and accessories = - Air Suspension - Lift Axle Ledpfsy T Ehtjx Akuehg = More information = Axle configuration Make axles: BPW Brakes: drum brakes Suspension: air suspension Rear axle 1: Tyre size: 385/65; Lift axle; Tyre profile: 30% Rear axle 2: Tyre size: 385/65 R20; Tyre profile: 30% Rear axle 3: Tyre size: 385/65; Tyre profile: 50% Weights Empty weight: 6.660 kg Carrying capacity: 30.340 kg GVW: 37.000 kg Functional Tipper: Back Identification Registration number: OS-94-GH

Condition: used, power: 309 kW (420.12 HP), first registration: 09/2005, fuel type: diesel, axle configuration: 8x4, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro3, suspension: steel, Year of construction: 2005, Equipment: ABS, electric window regulation, fog lights, power assisted steering, power mirror, = Additional options and accessories = - Hub Reduction - Immobilizer - PTO - Radio - Radio CD player - Speed limiter - Sper = Remarks = Superstructure Material: Staal Scania P420, 2005, Euro 3, 8x4 with hub reduction, Leaf-sprung, Manual transmission, IPSAM stainless steel tank, ADR, Uraca High-Pressure Pump, Sihi Vacuum Pump = More information = Suspension: leaf suspension Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels; Reduction: hub reduction Rear axle 2: Double wheels; Reduction: hub reduction Make of bodywork: IPSAM Water tank: Yes Tipper: Back = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered. Lsdpoy T Rlqofx Akuohg

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, total width: 1,200 mm, total length: 6,400 mm, overall weight: 850 kg, Schraml Clear 13 Special 4 Working height 580 mm Year: 2007 Lodpfxeu Nw Szs Akuohg Condition : Good used Open Top Washing height 1300 mm Brushes 4 Also available in lines with drilling machine.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 6,650 mm, total width: 1,000 mm, overall weight: 2,300 kg, Brand: Zafferani - Year: 2004 - Model: Combined Flat / 60 - With variable angle - Total running meters: 141,600 meters - Feed direction: left to right - Speed: 0.4 to 3.2 m/min - Glass thickness: 3-25 mm - Removal: 0-3 mm - Infeed: 2000 mm Lodpfxeymm Ime Akuohg - Outfeed: 2000 mm - Machine: 2650 mm - Total machine length: 6650 mm - Width: 1000 mm - Working height: 890 mm - Weight: 2300 KG - Power: 11.6 kW / 230 V (16 A) - Water tank included.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, operating hours: 987 h, Vertical Schraml Drilling Machine Top Drill 130 NC - Usable height: 1300 mm (open top) - Infeed and outfeed: 2900 mm - Glass thickness: 3-30 mm - Overall length: 6000 mm - Width: 2000 mm - Height: 2200 mm Lsdpfx Aoyuiwaekujhg - Condition: As new - Year of manufacture: 2011

Condition: good (used), Year of construction: 2004, Used conventional press brake by Baykal Type APH 3110 180 Lhjdsy Tuiyjpfx Akujg Capacity 3100 x 180 tons Adjustable back gauge and stroke adjustment Amada / Euro clamping system Includes 1 set of tooling

Year of construction: 2026, condition: used, Suitable for automatic machining of PCD-tipped milling cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc electroerosion process. Accessories: Total enclosure, SK 40 or 50 workpiece carrier according to preference, Cooling unit for dielectric, Automatic fire extinguishing system, Measuring probe, SK 40 or 50 measuring mandrel depending on workpiece carrier, Alphanumeric keyboard for data management, Software package for peripheral machining of end mills and jointing cutters, linear machining in all common axis directions, Software package for compact and radius machining, profile cutters in path-travel and plunge-cutting processes, Software package for profile tools, 4-path program for peripheral electrodes, Software package for circular saws for complete machining of tooth backs and flanks of all common geometries, Automatic central lubrication, 1 short dressing holder, 1 mounting flange for erosion wheel. Machine is brand new!! Originally packed and full warranty from Vollmer! Cutter outer diameter: max. 250 mm Shank tool diameter: from 10 - 100 mm Outside diameter of disc-shaped tools: 380mm cutting length: Max. 20 mm Cutting length: Max. 20 mm Tangential clearance angle: max. 6 ° Radial clearance angle: -15° to + 6° Chamfering: automatic max. 70° X axis travel: 280 mm Z-axis travel: 330 mm workpiece carrier cone: SK 50 Y axis travel: 280 mm Workpiece carrier cone: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30 ° Tool weight max: 20 kg clearance angle: 30° Dimensions L x W x H: = 1905 x 2520 x 2430 mm Connected load: 3.4 kW (400 V / 50 Hz) colour: grey RAL7045 / RAL 7047 Ljdpfx Akjy T It Ejushg Diameter of rotating electrode: Max. 150 mm Rotational electrode speed: 80 - 1500 rpm weight: approx. 3000 kg

Condition: used, functionality: fully functional, machine/vehicle number: B222E01752G, Year of construction: 2009, operating hours: 12,300 h, load capacity: 46,000 kg, lifting height: 14,880 mm, fuel type: diesel, mast type: telescopic, construction height: 4,760 mm, power: 224 kW (304.55 HP), empty load weight: 85,760 kg, drive type: Diesel, Full Container Reachstacker Chassis number: B222E01752G Mast type: Telescopic Transmission: Dana TE27 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 18.00-33 Front tyre condition: 60 - 80% Rear tyre type: Pneumatic Rear tyre size: 18.00-33 Rear tyre condition: 40 - 60% Description: We sell in as-is condition ex works, to save on transport and handling costs. Sideshift, Ledpfxjxybdho Akuehg Full cabin, air conditioning, joystick, Piggy back, pile slope camera, central lubrication, movable cabin

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, power: 5.5 kW (7.48 HP), cutting height (max.): 154 mm, cutting width (max.): 1,000 mm, saw blade diameter: 500 mm, tilt adjustment saw blade: 46 °, saw blade bore: 30 mm, table height: 910 mm, Equipment: CE marking, rotational speed infinitely variable, scorer, HAND GUARD Edition Single Flex: Equipped with a saw head that pivots to one side, pivoting range: 0-46°; features a quick-change system for the main saw blade, and motorized height and pivoting adjustment for the main saw blade. Motorized height and pivoting adjustment with a maximum saw blade overhang of 154 mm. The control panel is positioned at eye level, allowing you to adjust the height and pivoting angle of the saw blade, as well as, depending on the control package selected, the speed and other functions. The Altendorf twin-roller carriage is renowned for its smooth operation and precise movement. It can be locked steplessly in any position. The large twin rollers ensure that the upper carriage and the lower carriage remain perfectly aligned within their respective guide rods. This smooth running quality is maintained even after decades of use and under dirty conditions. The carriage construction is designed as an extremely torsion-resistant and dimensionally stable multi-chamber system. In addition, there is a front support roller with a width of 300 mm. HAND GUARD, pivoting to one side: The HAND GUARD system is based on the early detection of a hazardous situation, thereby protecting the operator from injury and functioning in every work situation. The camera-based system recognizes hands and, through its artificial intelligence, is able to predict their trajectory. Different zones, ranging from safe to triggering the system, provide visual warnings to the operator via an LED color strip to alert them to a potential hazard. If the danger persists, or if the hand moves directly towards the rotating saw blade, the saw blade is quickly lowered without damaging the person, the machine, or the material. Hand Guard supports the processing of all materials approved for panel saws, such as damp lumber, aluminum, and plastics. It cannot be deactivated in the standard configuration and has a permanent function. On machines with single-sided pivoting, saw blades up to 500 mm in diameter can be completely lowered under the work table. All approved, existing, or used tools can be used. No special requirements. Equipment: - Machine height 910 mm - Fence PAK A/E - Max. blade diameter 500 mm (option) - Motor 5.5 kW (7.5 HP) VARIO PAK (option) - Table extension 840 mm - Twin-roller carriage, carriage length 3,200 mm - Miter fence Digit L PAK Lodpfx Ajy Tuf Iskushg - Parallel fence 1000 mm PAK package, cutting width 1000 mm - Front support roller PAK HG (option), width 300 mm - 2-axis scoring head, single-sided pivoting - Camera arm, swiveling out of the way Control panel F45 Hand Guard Single Flex - 12" touchscreen with integrated keyboard - Automatic dimension correction on the parallel and miter fences when the saw head is pivoted - Stepless fine adjustment of the axes via +/# buttons - Easy calibration of the axes - Machine diagnostics, operating hours counter, USB interface - Recall of the last dimension input (back function) - Conversion from angled to straight dimensions on the parallel and miter fences - Shift-cut function with automatic determination of missing angles or dimensions - Extended tool management for a maximum of 100 storable tools - Storage of the scoring blade thickness and cutting width of the main tool - Storage of the speed of the main tool

Condition: good (used), Year of construction: 1980, Sheet metal shears, tin snips, sheet metal sheet metal shears, crank-operated sheet metal shears, auxiliary sheet metal shears -mechanical guillotine shears -Cutting width: 1130 mm -Max. cutting thickness: 4.0 mm -Features: Back fence, side fence, 3 supports -Drive: 2.2 kW -Protrusion: 115 mm -Installation dimensions: 2620/1685/H1365 mm Lhsdpfx Aoy Tyqvekusg -Transport dimensions: 1215/1685/H1365 mm -Weight: 1250 kg

Condition: good (used), approx. 270 upholstered trolleys - used - : Price per item from location: €99 (net)! PW240 Lsdjvzlklspfx Akushg Manufacturer: Cordes: Type: unknown Year of manufacture: unknown - used - as new, unused, only stored back and forth - approx.: W 240 - 300 x D 89 x H 123 cm - extendable -> 300 cm - light blue - 4x plastic swivel castors can be picked up with a pallet truck foldable - upholstered/suitcase trolley boxed Condition: good Available: immediately Location: 2630 Aartselaar Belgium

Year of construction: 2013, condition: used, Dimensions (LxBxH): 2130 x 1270 x 460 cm CE compliant: yes Including control box Connection: 230/400 volt 50 Hz Maximum length of workpiece: 13000 mm Maximum width of workpiece: 500-1200 mm Maximum height: 500-1200 mm Working pressure: 6 bar Digital manual available Worktable with guide rails not present on 1 of the 2 laser welding machines Sheet steel cabin: Overall dimension: 21300x12700x4600 mm Lhodpfoy T N Tmsx Akusg Interior dimensions one part: 21000x6000x4550 mm Middle part of the roof is open one part Each part is equipped with double gate at the back and door at the front Auction by tender of the production line of KSK GmbH at Schwerte (DE). The site was active within component production for the mobile crane industry and specialized in the production of heavy, welded steel components and long-form structural parts. Among the products processed within KSK were high strength steel grades such as S690QL, S960QL, S1100QL and S1300QL. The online auction opens Wednesday 6 May and closes Tuesday 9 June. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Lhjdpfxjy Tv E Ae Akujg Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee Ledsy Tvy Tepfx Akuehg - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Cantilever rack NEW PRODUCT Data: - H: approx. 350 cm - D: approx. 137 cm - L: approx. 402 cm - Cantilever arms: approx. 120 cm - Axle dimension: 131 cm - NEW PRODUCT immediately from stock. - 500 kg load per arm - 2250 kg load per stand - Stand in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 100 mm increments. - Levels: base + 3 storage levels (4 storage levels) Shelf consists of: - 04 x stands, including base approx. 350 cm made of IPE160. - 12 x cantilever arms approx. 120 cm made of IPE 80 - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the shelf uprights and cantilevers are statically verifiable, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Angle steel braces, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €2356.00 net + legally applicable VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment. Our recommendation: Lhedey Tvytjpfx Akuog Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.

Condition: new, Cantilever shelf, double-sided, new goods Data: - H: approx. 400 cm - W: approx. 256 cm - L: approx. 18.45 linear meters - Cantilever arms: approx. 120 cm - Axle dimension: approx. 131 cm - New goods from the factory - Double-sided - 500 kg load per arm - 2250 kg load per stand - Stands in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. - Arms are screwed. - Arms adjustable in 200 mm increments. - Levels: base + 4 storage levels (5 storage levels) - Delivery time approx. 4 weeks Shelf consists of: - 015 x stands, double-sided, including base approx. 400cm made of IPE160. - 120 x cantilever arms approx. 120 cm made of IPE 80, without deflectors - including all necessary connecting elements and screws. Why BLT cantilever racks? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load capacities of the shelf uprights and cantilever arms can be statically verified, at 100% load. - All shelving systems are supplied in hot-dip galvanized versions. They can therefore be set up inside and outside and do not rust like painted systems. Consistent appearance for many years. - We use the legally required hot-dip galvanized screw sets in accordance with DIN EN 15048-1 - Long availability guarantee - The stand base and stand back are welded together, which provides additional safety and short assembly times because the feet do not have to be screwed to the stand back. - Brackets made of angle steel, so no adjustment using turnbuckles is necessary. This shortens the assembly time. - No slotted hole system, so no weakening of the stand profile. Price: €12,450.00 net plus statutory VAT. You will receive an invoice with VAT shown. Transport: Delivery is carried out by our partner shipping company on request, the costs for this depend on the postcode. Assembly: Our trained staff will be happy to assist you with the professional assembly and disassembly of your business equipment if required. Lodpfxjy Tvymj Akushg Our recommendation: Let us know what you need... We will be happy to help you with the realization of your projects, from planning to ordering to assembly.