Used Distributor Manifolds for sale (409)

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Dsdpfxsy Ii Dzo Aktskn Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Dkedsx Nuf Hopfx Aktjn Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: used, mileage: 176,100 km, power: 110 kW (149.56 HP), first registration: 02/2005, fuel type: diesel, overall weight: 7,490 kg, color: grey, emission class: euro3, number of seats: 3, total length: 8,080 mm, total width: 2,550 mm, total height: 3,550 mm, Special equipment: * Reinforced battery * Electric window lifters * Side-mounted spare wheel holder * Tail lights for tail-lift mounting * Tail lift * Tail lift switch * Cab seats: adjustable passenger seat * Cab seats: center seat with seatbelt * Cross member for trailer coupling Standard equipment: * Axle configuration: 4x2 * Exterior mirrors electrically adjustable and heated * Cockpit distributor * Roof hatch (steel) * Cab: S (short) * Suspension: leaf/leaf * Alternator 80 A * Transmission 6-speed - Type: G 56-6 * Rear axle H 2, crown wheel 325 Dodpfx Akoyy Hqcjtokn * Interior filter: pollen filter * Bodywork: chassis * Fuel tank: 125 liters * Model update Atego 2 * Engine 4.3 L - 110 kW diesel (OM 904 LA) * Wheelbase 4,220 mm * Disc brakes * Side impact protection * Cab seats: driver’s seat standard air-sprung * Telligent brake system with ABS * Fixed rear underrun protection * Immobilizer * Permissible gross weight 7.49 t Our special service for you: * Full service history with authorized partners and master workshop * Winter tires available at extra cost * Warranty insurance up to max. 36 months available at extra cost * We are happy to accept your used vehicle as a fair trade-in! * Financing brokerage from 6.99% with or without down payment, up to a maximum of 96 months, subject to creditworthiness * TÜV / DEKRA main and emission inspection * EU net sale possible – intra-community delivery with valid VAT ID number * Non-EU countries (worldwide) sales possible, incl. export declaration, supplier’s declaration * We deliver your vehicle nationwide in Germany at extra cost! * Registration service for customs and short-term license plates, incl. insurance and registration fees The information provided on the Internet is non-binding and for descriptive purposes only. Input errors and mistakes excepted. The information provided does not constitute a guaranteed property as defined by § 434 paragraph 1 sentence 3 BGB.

Condition: new, maximum load weight: 31,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, Equipment: ABS, New vehicle - Available immediately! For sale, lease, or lease with option to purchase upon request! GRW - VAN HOOL 35m³ Horizontal Cement Silo - NEW----* Manufacturer: GRW / VAN HOOL * Type: Cement Silo * First registered: - (New vehicle) * Color: Chassis RAL 7024 Graphite Gray, Container RAL 9001 Cream White * Volume: 35m³ / 1 Chamber * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 4,520 kg * Payload: 31,480 kg * Axles: 3x SAF axles / disc brakes * Tires: 385/65 R22.5 NEW / Alcoa aluminum rims * Suspension: Air suspension * ABS / EBS * 2 bar pressure tank * Operating temperature from -40°C to +80°C * 1 chamber * 2 dome covers * 4" pinch valves * 4" central outlet to the rear * 1x DN65 aluminum pipe (painted) runs on the right side from the main air supply to the distributor * 1x DN65 upper air hose line * 2x hose pipe boxes left and right (5m) * Fluidization mats * 1,185mm fifth wheel height * Aluminum chassis * Aluminum walkway with access to the rear left * Single fender * Full load supports * Toolbox * Aluminum air tank * Loading pressure gauge * LED work lights * LED reversing lights * Reverse alarm New vehicle - Available immediately! For sale, rent, or lease with option to purchase upon request! Dkjdpfx Aewaqhlekton Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, total length: 2,072 mm, total height: 2,856 mm, total width: 2,105 mm, workpiece weight (max.): 30 kg, power: 2.5 kW (3.40 HP), workpiece height (max.): 1,500 mm, overall weight: 450 kg, filter area: 22 m², energy consumption: 3 kWh, ⭐⭐⭐⭐⭐ ⚡ Top Service ⚡ Fast delivery ⚡ Professional support! ✈️ The listed price is the net price plus VAT and shipping costs. ✈️ Shipping costs are calculated separately based on the delivery address. Please contact us for an individual shipping quote. ✅ Made to order ✅ Brand-new, unused professional industrial product ✅ Proton Maschinenbau GmbH is the sole authorised distributor for Matech products in Europe ✅ 2-year warranty ⏱️ Delivery time: approx. 4 weeks after receipt of payment Please also enquire about current stock availability. ➖➖➖➖➖ ⭐ Matech Powder Coating Booth – MATBOOTH.FT-2W MATECH QUALITY – WITH PROTON SERVICE! The Matech MATBOOTH.FT-2W is a compact powder coating booth designed for professional manual powder coating of small and medium-sized workpieces. Featuring high extraction performance, an automatic filter cleaning system, and a powder recovery container, this booth ensures clean, practical, and economical operation. ☘️ Efficient ☘️ Clean application ☘️ Professional results ✅ Compact solution for professional powder coating ✅ Powerful extraction system ✅ Automatic filter cleaning system ✅ Economical operation with powder recovery ✅ Convenient working with 360° rotatable suspension system ✅ Individual adaptation possible through various additional options ➖➖➖➖➖ Technical features: ✔️ 2 polyester filters ✔️ Filter dimensions: Ø325 x 725 mm ✔️ Automatic filter cleaning system ✔️ Adjustable cleaning interval ✔️ Powder recovery container: 30 L ✔️ 360° rotatable and movable suspension system ✔️ 1 x 2.2 kW extraction fan ✔️ Extraction capacity: 2,800 m³/h ✔️ Control panel ✔️ Lighting ➖➖➖➖➖ ✨ No more exhaust ductwork – thanks to the Nano Filter Box! ✨ With the optional Nano Filter Box, you can operate your powder coating booth without a flue connection or fixed ductwork. This provides maximum flexibility – even in workshops where direct exhaust air routing is not feasible. Additionally, the booths can be individually tailored and upgraded to suit your specific work requirements with a range of optional features. Dedpfjy It Uwox Aktjkn ➖➖➖➖➖ ✳️ Preserve your liquidity! We offer various financing solutions to help you plan your investment flexibly. Contact us for information on leasing, hire purchase, or instalment payment options. ➖➖➖➖➖ ✨ Buy directly from the official European distributor and benefit from service and quality advantages! ✨ Proton Maschinenbau offers professional Matech surface technology for industrial applications. Our machines are made to order and are supplied as new, unused equipment with a 2-year warranty. Special dimensions or customised designs are available upon request. We are happy to plan the right solution for your workshop. Enquire now – get your business ready for professional powder coating! ☀️ 2-YEAR WARRANTY ☀️

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, Dedpfx Akevfxqystskn 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Year of construction: 2004, condition: used, Year: 2004 Condition: good Dkodpey Ixnpjfx Aktjn Counter. 91 Mil Impression but reality is approx. 200 Mil Machine on stock Technical specification: - Maximum sheet size: 720 × 1,030 mm - Minimum sheet size: 360 × 520 mm - Paper thickness: 0.07 – 0.30 mm - Maximum printing area: 705 × 1,020 mm - Maximum printing speed: 13,000 sheets per hour - Minimum printing speed: 3,500 sheets per hour Printing plate: - Length × Width: 800 × 1,030 mm - Thickness: 0.30 mm Blanket: - Length × Width: 900 × 1,040 mm Inking unit: - Number of form rollers: 4 - Form roller diameters: 87.5 – 77.5 – 85 – 90 mm - Number of rollers: 21 (lower unit) / 20 (upper unit) Pile height: - Feeder: 1,430 mm - Delivery: 1,430 mm Dimensions and weight: - Length × Width × Height: 11,022 × 4,037 × 3,383 mm - Weight (standard configuration): 64,220 kg (machine only) Electrical specification: - Power consumption: 117.94 kW (machine only) - Frequency: 50 Hz Specification: - Remote diagonal register adjustment (cocking). - Semi-automatic plate changing in the upper printing unit. - Semi-automatic plate changing in the lower printing unit. - AMR job presetting system: presetting of paper size and thickness, presetting of feeder table brushes / feed roller, presetting of feeder side air blowers, presetting of the side lay, and sheet drum brake position. - Automatic ink roller washing system. - Automatic blanket washing system. - Automatic impression cylinder washing system. - Lateral feeder pile adjustment (via shifting feeder). - Remote sucker height adjustment. - Water-cooled distributor rollers. - Oscillating ink form rollers: 2 × B and 2 × D for the upper and lower printing units separately. - Chrome-plated plate cylinder. - Chrome-plated impression cylinder (with special surface coating). - Chrome-plated blanket cylinder. - Combined Technotrans Beta.C 300L system for dampening solution cooling and ink temperature control (including CombiControl 4.3, Aquados C5, and integrated tank). - Grafix powder spray unit with Grafix powder spraying system.

Condition: like new (used), Year of construction: 2023, operating hours: 2,983 h, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 635 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller model: RMS6, spindle speed (max.): 24,000 rpm, spindle nose: HSK63A, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Röders RXP601 DSH incl. Automation RCE2 X-axis: 540 mm Y-axis: 635 mm Z-axis: 400 mm Clearance table/spindle: 485 mm Spindle: HSK63A, 24,000 rpm MHT medium distributor incl. holders and nozzle bodies included Compressed air through spindle Machine table: Erowa UPC 320x320 Tool changer: 64 positions Preparation for emulsion cooling and high-pressure coolant (IKZ) Options package: - Thermo package for maximum precision - Spindle compensation - Blum measuring laser for tool measurement - Handbox with display - Workpiece cleaning with compressed air Dedpfx Aey Ez Utjktokn - Tool cleaning with spray medium - Automatic machine calibration for maximum precision even with fluctuating temperatures - UPS for machine control - Remote maintenance - 3D measuring probe, automatically thermostable cone - Oil mist extraction with mechanical filter - Emulsion machining, preparation for high-pressure 40 bar pressure stages - Medium distributor: 1 medium/3 delivery rates - Medium distributor operation with MV2 - Front machine door as automatic lift door - Chuck control, dual pneumatic - Job manager RMSMain - Stainless steel internal cover - 3D machine model Automation RCE2: 10-position pallet changer for Erowa UPC pallets with max. dimensions 340x340 mm Maximum load per pallet: 300 kg

Condition: used, mileage: 570,000 km, power: 300 kW (407.89 HP), first registration: 03/2010, fuel type: diesel, empty load weight: 16,500 kg, maximum load weight: 15,500 kg, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,200 mm, brakes: engine braking, color: red, driver cabin: day cab, gearing type: mechanical, emission class: euro4, suspension: steel, number of seats: 2, loading space length: 5,400 mm, loading space width: 2,420 mm, loading space height: 1,100 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: in transit, steel body, type house, 1x comfort seat, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, 16-speed manual gearbox, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, leaf suspension, aluminum tank, low-noise G1, underbody protection, chute, pendulum flaps, roof hatch, green environmental badge. Wheelbase: 4,200 mm Body: interchangeable system consisting of 3-way tipper body & Stetter concrete mixer body approx. 9m³ Front axle 7.5 t, rear axle H7 13 t, crown gear 233, switchable ABS, Telligent brake system with ABS and ASR, disc brakes front and rear, rear axle stabilizer, steel bumper, PSM, pre-equipment for toll recording, distributor cockpit, Telligent gearshift II, construction site filter, on-board diagnosis 1.0, transmission oil cooling, double PTO MB 124-11B/1C flange + MPA M-speed, rear engine output 600Nm. VIN: WDB9333041L296831! Dedpfx Akoyniw Hjtjkn All information is given without guarantee as the vehicle is in transit! ACCESSORY DETAILS WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: excellent (used), I am offering a high-quality compact hydraulic power pack from the renowned brand DANA / Brevini Fluid Power. The unit is in excellent technical condition and ready for immediate use. An ideal solution for industrial, mobile, and service applications. ⚙️ Technical specifications: Manufacturer: Dana SAC Germany GmbH / Brevini Year of manufacture: 01/2023 Power supply: 12V DC Motor power: 0.7 kW Current: 100A Speed: 3100 RPM Torque: 2 Nm Pump displacement: 0.56 cm³/rev Maximum pressure: 190 bar Tank capacity: 2 liters Protection class: IP54 Duty cycle: S3 (10%) Rotation direction: CCW (counterclockwise) 🔩 Equipment included: - Brevini hydraulic solenoid valves - Valve block (manifold) - Hydraulic quick couplings - Complete 12V electric motor - Oil reservoir - Wiring harness + multipin connector 📦 Applications: These power packs are used, among others, in: - Lifts and hoists Djdpfx Ajy H Nn Roktjkn - Trailers and tippers - Industrial machinery - Mobile hydraulic systems - Automation and special equipment 🧠 Additional information: - Compact and highly efficient hydraulic unit - Dana/Brevini brand = high quality and durability - Suitable for operation in demanding conditions

Condition: ready for operation (used), Year of construction: 2010, A complete film packaging line Georg Hartmann, consisting of a line distributor, two grouping units and a pillow pack packaging machine, is available. Packaging materials: film, Packaging capacity: approx. 30 packages/min. Documentation available. An on-site inspection is possible. Dkodsy Ey Ufopfx Akton

Condition: new, functionality: fully functional, Year of construction: 2026, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Shenzhen ICM Technology Development Co., Ltd., controller model: 880W02, pipe diameter (max.): 38 mm, pipe length (max.): 3 mm, tube wall thickness (max.): 2 mm, bending angle (max.): 190 °, bending radius (max.): 200 mm, bending radius (min.): 2 mm, mandrel length: 150 mm, number of axes: 2, table length: 3 mm, overall weight: 1,300 kg, total length: 3,900 mm, total width: 900 mm, total height: 1,400 mm, power: 4 kW (5.44 HP), input voltage: 400 V, input current: 20 A, input frequency: 50 Hz, type of input current: three-phase, oil tank capacity: 80 l, number of digital displays: 1, warranty duration: 36 months, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, quick-change device, Full Automatic Pipe Bending Machine DW38CNC-3A-1S Dkodpfx Aey Uuw Tektjn Equipped with a touchscreen and CNC control system; capable of storing up to 500 sets of parameter groups. Features a rebound compensation setting program, with built-in confidentiality protection for programs and processing data. Servo control is adopted for corner bending, pipe bending and material feeding functions. The operating system is protected by passwords and physical keys, and supports production quantity & runtime records for efficient production management. Comes with slow bending and slow core pulling functions. Fault messages are displayed on the screen to help operators troubleshoot problems promptly. Touchscreen This pipe bender is equipped with a Weinview industrial touchscreen for its operation interface, which delivers an intuitive operation experience and allows new operators to get started quickly. You can directly edit the pipe bending process parameters on the interface, such as feeding distance, rotation angle and bending angle, and separately set the running speed for each step. During operation, the interface displays real-time axis positions, bending progress and production cycle, and automatically counts total output and shift output to help you manage production efficiency effectively. It also supports manual single-step debugging, automatic continuous operation, program editing and equipment parameter setting. Different modes can be switched with one click, making it convenient for machine trial runs and mass production alike. Hydraulic solenoid valve manifold This integrated hydraulic solenoid valve manifold serves as the control center of the CNC pipe bender's hydraulic system. Adopting industrial-grade modular design, it integrates multiple solenoid valves to independently control the movements of the feeding axis, rotating axis, bending axis, as well as clamping, auxiliary pushing and other auxiliary mechanisms. Linked with the CNC system, it converts control commands into precise hydraulic power output, enabling smooth operation throughout pipe feeding, rotation and forming. Matched with high-pressure sealed hydraulic hoses, it maintains zero leakage and high stability under full-load operating conditions, delivering reliable performance for long-term mass production. Servo drive These four units are Mitsubishi servo drives equipped on our pipe bender, acting as the power core that governs key movements including material feeding, pipe rotation and pipe bending. Adopting Mitsubishi MR-JE series industrial-grade high-end servo drives, they feature high positioning accuracy and fast response. Both feeding distance and rotating angle can be controlled precisely with no deviation. With excellent stability, they rarely lose steps or malfunction during long-hour continuous operation. This ensures consistent bending precision for every pipe and a high finished product yield.

Condition: new, functionality: fully functional, Year of construction: 2026, control type: NC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Nanjing Estun, controller model: E21S, working width: 3,200 mm, cutting angle (min.): 0.5 °, stroke rate (min.): 15 1/min, stroke rate (max.): 15 1/min, sheet thickness (max.): 8 mm, sheet thickness aluminum (max.): 10 mm, sheet thickness brass (max.): 10 mm, sheet thickness copper (max.): 10 mm, sheet thickness steel (max.): 8 mm, sheet thickness stainless steel (max.): 4 mm, table height: 850 mm, back gauge adjustment: motor-driven, back gauge: 600 mm, back gauge speed R-axis: 40 mm/s, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, control voltage: 400 V, oil tank capacity: 220 l, overall weight: 7,000 kg, total length: 3,950 mm, total width: 1,700 mm, total height: 2,150 mm, number of support arms: 3, warranty duration: 24 months, Equipment: CE marking, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, type plate available, QC11K-8/3200 Guillotine shearing machine The frame adopts an all-steel welded structure, boasting sufficient strength and rigidity. Internal stresses are eliminated through normalizing and high-frequency vibration treatment to ensure the overall precision of the machine body. German large-scale floor-type boring and milling machines are employed for precision machining using a one-time processing method, guaranteeing exceptional machining accuracy. It features a hydraulic swing-type structure with an upper tool rest return device powered by nitrogen cylinders, enabling fast return speeds. The hydraulic system utilizes an integrated logic circuit controlled by sequence valves, ensuring stable operation, low noise, and straightforward maintenance. Tool rest movement is regulated by hydraulic valves for precise control. The material pressing device incorporates an integrated circuit and independent parallel clamping cylinders. When dealing with uneven sheet metal, the cylinders can expand and contract freely to securely clamp the material. The clamping force is adjustable according to the sheet material and thickness, preventing any damage to the sheet surface. Motorized adjustment allows for quick setting of the blade gap, offering simple operation to adapt to shearing requirements of different sheet thicknesses and materials. Control is achieved through a numerical control (NC) system, enabling fixed-stroke shearing operations. An optical line alignment device facilitates scribed line shearing for enhanced accuracy. The electrical control system is centralized and reliable, with the following key features: All power facilities are installed within the machine body, operated and controlled via buttons on the control panel. A foot switch is provided for direct and convenient operation of the shearing action. Core electrical components are sourced from Schneider for guaranteed quality and reliability. Circuit breakers are installed to protect the control circuit against short circuits. Motor thermal-magnetic circuit breakers provide protection against motor overload and short circuits. The hydraulic system is designed for safety and reliability: The hydraulic system manifold block is equipped with a direct-acting safety relief valve to ensure accurate pressure adjustment. Dsdpsy Uquhofx Aktjkn A pipeline check valve is specially installed at the pump head to protect the oil pump from hydraulic shock. Both upper and lower blades are made of high-quality materials and undergo full heat treatment, ensuring sufficient hardness and a long service life. The ball-rolling worktable and front material supporting device facilitate easy feeding while preventing scratches on workpieces during operation. The CNC back gauge device is equipped with high-performance servo motors, drives, precision ball screws, and linear guides, achieving a positioning accuracy of ≤±0.1mm. For the CNC electrical system:The back gauge is controlled by the E21S simple CNC system. Users can directly input the desired values, and the back gauge automatically moves to the specified position upon confirmation. Transmission is achieved through a motor-driven precision lead screw and nut assembly, with digital display via a counter. Fine-tuning for free size correction is not configured to ensure shearing precision, with an error of ≤0.2mm per meter. Three front support arms are fixed on the worktable, providing convenient placement for shearing materials.

Condition: like new (used), Year of construction: 2019, Arburg 1200 T 2000-800 (vertical machine with rotary table 1200mm) Clamping unit 2000T Table diameter: 1200mm Angle rotation: 180 degrees Clamping force: 200 tons Opening force max. kN/mm: 115/500 Platen daylight max. : 600 mm Dsdpjwugczsfx Aktjkn Injection unit Screw diameter: 45 mm Shot volume: 318 cm3 Shot weight: 291 g Injection pressure: 2470 bar 1. Model: T model 2. Machine type: 1200 T 2000 - 800 3. Plasticizing unit: Thermoplastics cylinder 45 mm, highly wear-resistant 4. Screw: Reinforced screw coupling for splined coupling geometry 5. Control system: SELOGICA ‘direct’ controller 6. Technology stage: Stage 2 servo-regulated with 2 control pumps 7. Rotary table: Advanced ergonomics special model, 2-station 180° forward/backward alternating 8. Nozzle: Open nozzle 45 mm with nozzle tip 9. In-mould needle nozzles: Electric & hydraulic control for needle nozzle 1, electric & pneumatic control for needle nozzle 2 10. Heating: Heater band for open nozzle, 9 electric heating control circuits for mould heating 11. Clamping platen: Mould mounting platen set, central diameter 125 mm 12. Blow unit: Mould blow unit with pressure reducer at station 1 13. Safety: Optical barrier at loading station, continuous oil cooling and filtration 14. Hopper: Adapter (extension) for feed hopper, machine delivered without 50 L hopper 15. Robot interface: Interface for robot system for station 2 & 3 (based on EM67/1) 16. Electric axes: Basic equipment for electric axes control 17. I/O: 4 programmable inputs/outputs on terminal rail 18. Sockets: Additional socket combination (1 CEE, 1 Schuko) 19. Interfaces: Temperature control device interface (REGLOPLAS), printer USB interface, Compact Flash, EUROMAP 65 chip card user authorisation 20. Acoustic alarm: Error alarm acoustic signal 21. Safety interlock: Interface for safety interlock of door (EUROMAP 73) 22. Cooling circuits: 3 regulated machine-related cooling circuits with flow indicator, 3 manually adjustable cooling circuits for second water manifold 23. Anti-corrosion: Anti-corrosion treatment for rotary table, sealing lip on outer diameter 24. Manual & labels: CD operating manual & spare parts list, Slovak language labels 25. Machine feet: Anti-vibration footplates 26. Other: Hydraulic ejector, external cycle start key, standard equipment packages, new ARBURG colour scheme 27. Display languages: IT/EN/SK

Condition: used, empty load weight: 3,782 kg, maximum load weight: 14,218 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 10/2017, loading space length: 7,100 mm, loading space width: 2,450 mm, loading space height: 1,000 mm, color: blue, Year of construction: 2017, gearing type: other, driver cabin: other, Equipment: ABS, compressed air brake, * German vehicle * 1st owner Dkodpoxf H Ezofx Aktjn * Condition as shown in photos * KRONE axle(s) * Disc brakes * Loading dimensions: 7.10 m x 2.45 m x 1.00 m * Wooden loading floor with lashing rails * DIN-compliant lashing rings * Aluminum side walls * Removable intermediate stakes * Longitudinally adjustable drawbar * Storage box * EBS * ABS * ABV/ALB (automatic brake force distributor/automatic load-dependent braking) If a new TÜV inspection is required, we are happy to provide a quote from one of our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV certification, without new safety inspection (SP), and without new accident prevention regulation inspection (UVV). You can find more trucks on our website at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend inspection and examination of the goods, so that buyers do not have any misconceptions regarding condition and suitability. Inspection and examination are possible and expressly desired at any time by prior appointment. All information is provided without guarantee. No liability is assumed for errors or incorrect details in the offer. The buyer is obligated to independently verify the condition and equipment of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: excellent (used), Year of construction: 2009, operating hours: 35,808 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, displacement volume: 204 cm³, injection pressure: 1,860 bar, injection weight: 186 g, Here we offer the following well-maintained used injection moulding machine as an injection moulding machine dealer: Of course, we also purchase well-maintained injection moulding machines from the 2010 model year onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: KraussMaffei Model: KM EX 80-380 (fully electric) Serial number: 61013142 Year of manufacture: 2009 Operating hours: 35,808 h Control system: MC 5 Fully functional Condition: very well maintained Machine comes from original German ownership xxxxx without robot / without temperature control unit xxxxx Extras: - Pneumatic needle shut-off nozzle - 1 pneumatic valve on BWAP - Pneumatic control for 1 hot runner - Pneumatic control for hot runner/cold runner - Reject chute - Nozzle guard door – ejector area safety door foldable - Euromap 18 interface on FWAP - Electrically actuated ejector plate in BWAP - Hydraulic auxiliary unit for core pulls - Injection-compression control - 2 x hydraulic core pulls (on BWAP and FWAP) - Pressure relief for core pulls on BWAP and FWAP - Water manifold, 8 circuits - 8 heating zones for hot runner - Extrusion injection circuit with position control - 3 x 230V sockets, 2 x CEE 16A / 1 x CEE 32A - EUROMAP 67 signal interface for robot - Start-up sequence, quality assurance package, cycle time analysis, cycle memory, event protocol - BluePOWER package: energy consumption display - Graphics analysis package, trend chart - Interface for temperature control unit Dkedpfeyrd U Uox Akten - Cycle time analysis, actual cycle time optimization Injection unit: Screw diameter: 40 mm Shot weight: 186 g / PS Injection pressure: 1,860 bar Shot volume: 204 cm³ Clamping unit: Clamping force: 80 t / 800 kN Tie bar spacing: 420 x 420 mm Platen size: 655 x 670 mm Mould installation height: 250 mm Max. platen gap: 750 mm Ejector stroke/force: 100 mm / 22 kN Clamping unit fully electric Warranty: Warranty until first commissioning Loading/Shipping: Free loading onto buyer’s truck or free delivery within Germany against reimbursement of freight charges Available from our warehouse in Hannover, Germany

Condition: excellent (used), Year of construction: 2022, operating hours: 7,800 h, functionality: fully functional, machine/vehicle number: Puma 2600, turning diameter over cross slide: 630 mm, turning length: 1,245 mm, turning diameter: 376 mm, spindle bore: 102 mm, spindle speed (max.): 2,800 rpm, spindle motor power: 26 W, type of input current: three-phase, controller manufacturer: FANUC, number of spindles: 2, operating hours of spindle: 7,800 h, number of slots in tool magazine: 12, Equipment: chip conveyor, For sale: Turning center with sub-spindle and Y-axis. Machine in perfect condition. Purchased new in mid-2023. Currently in operation, with less than 8,000 operating hours; parts produced well below its technical capacity. Serviced exclusively by an authorized distributor. Adapted for robot operation: equipped with autodoor and external communication signals. Features include parts conveyor and oil mist filter. NOTE: The robot is not included in this offer – separate sale and integration support can be offered upon individual quotation. TECHNICAL DATA according to manufacturer’s specification: 1) Capacity Swing over bed: 680 mm Swing over cross slide: 630 mm Max. turning diameter: 376 mm Recommended turning diameter: 315 mm Max. turning length: 1245 mm Max. workpiece weight (incl. chuck): In chuck: 500 kg (with support: 1000 kg) Bar capacity in spindle: 102 mm 2) Main Spindle Chuck: 315 mm Spindle nose: A2#11 ASA Front spindle bearing diameter: 160 mm Spindle bore: 115 mm Chuck through hole: 103 mm Spindle motor power (S3-25%/S6-60%/S1 Continuous): 26/22/18.5 kW Spindle speed range: 2 - 800 rpm Max. spindle torque (S3-15%): 1123 Nm Power transmission: Belt 3) Sub-Spindle Chuck: 175 mm (optionally 210 mm) Spindle nose: A2#5 ASA Spindle bore (diameter): 62 mm Sub-spindle cylinder bore: 50 mm (H8) Spindle motor power (continuous/30 min): 7.5/5.5 kW Sub-spindle speed range: 4,500 rpm Max. spindle torque (30 min): 85 Nm Power transmission: Belt 4) Axis Travel Djdpfex Rqkuox Aktjkn X axis: 260 mm Z axis: 1350 mm Y axis: 105 (±52.5) mm B axis: 1350 mm C axis (1, 2): 360° (0.001° increments) Rapid traverse: X axis: 30 m/min Z axis: 30 m/min Y axis: 10 m/min B axis: 30 m/min C axis: 200 rpm 5) Bed and Saddle Slant bed, tilt angle: 30° Bed guideway (Z axis): 437 mm Saddle (X/Y axis): 321/325 mm Sub-spindle stroke: 335 mm 6) Tooling System Tool holders: BMT 65P Number of tools: 12 Tool size: 25 x 25 mm Max. drill diameter: 50/32 mm (main/sub-spindle) Driven tool motor power (5 min/Cont): 7.5/1.5 kW Driven tool speed: 5,000 rpm Driven tool max. torque: 95.5 Nm Driven tool collets (ER32): Φ3–Φ20mm (option) Turret indexing time: Single position: 0.15 s (1.2 s full station) Max. driven tool drilling diameter: φ20 mm, M20 x P2.5 7) Hydraulic System Tank capacity: 20 l Flow rate (60/50 Hz): 25 / 20.8 l/min Power/Pressure: 2.2 kW x 5.0 MPa 8) Coolant Tank capacity: 250 l Flow rate: 30 l/min Power/Pressure: 0.7 kW x 0.15/0.1 MPa (60/50 Hz) 9) Machine Accuracy Positioning: 0.01 mm Repeatability: 0.02 mm C Axis Positioning: 0.0167° Linear repeatability (axes X/Z/Y): ±0.002/±0.003/±0.003 mm C Axis repeatability: ±0.006° 10) Control System Full electric control for X, Y, Z, C axes For further questions or additional information, please feel free to contact us by message or phone.

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, input current: 7 A, pressing force: 150 t, stroke length: 300 mm, Equipment: CE marking, documentation/manual, MOTORIZED HYDRAULIC PRESS WITH AUTOMATIC DOUBLE SPEED AND RAPID ADVANCE CAPACITY: 150 TONS The monolithic frame is entirely laser-cut and securely bolted in package form. This characteristic makes all our presses deformation-resistant, even in areas subject to the highest stress. All components are manufactured in Italy. Hydraulic power unit with ICME submerged motor 400 V, 50/60 Hz; cylinders and frames made in Italy. GALTECH monobloc distributor. No. 2 single-direction external gear pumps in aluminium by VIVOIL: one dedicated to fast approach and return (set at 20 bar), and one with pressure adjustable via handwheel to set the required force. Maximum pressure valve with mechanical lock to prevent overpressure. 2 MP CETOP high-range modular block. Standard pressure gauge for displaying delivered power. INTECH electrical control panel, certified to current standards and independently CE marked. Maximum capacity: 150 tons Rapid approach speed: 1,450 mm/min Working speed (slow): 105 mm/min Cylinder rod stroke: 300 mm Cylinder rod diameter: 110 mm Shaft diameter: M30 Tank capacity: 50 L Maximum pressure: 350 bar Voltage: 400 V Motor power: 3 kW Weight: 1,300 kg Djdpoy E Rr Iofx Aktekn

Year of construction: 2010, condition: excellent (used), Complete euroblock cheese production line designed for efficient processing of milk into Euroblock cheeses. The system can be easily expanded to produce various sizes of round cheeses with a weight of approximately 4–5 kg. It can process 6.000 liters of milk per batch, up to 4 batches a day. The line exists out of: Dkedpfeyzxdkjx Akton Milk reception (by a mobile centrifugal pump) Milk receiving pump from the truck or truck with pump unloaded itself. 1. 2 pieces raw milk storage tanks (refrigerated), 6.000 liter per tank. • Manufacturer: Mueller • Year of make: 2012 • Horizontal, insulated and cooled milk storage tank, cip cleanable. • Cooling compressor Freon 2. Milk reception valves • Valve manifold to automatically send the milk to the selected tank, to pump the milk from the tank into the pasteurizer and to CIP (cleanable). • Set of 4-way butterfly valves with controls. • Manufacturer: GEA – Tuchenhagen 3. Complete pasteurize installation • Manufacturer: C van ’t Riet • Year of make: 1996 • Capacity: 6.000 liter • Complete on a skid. • With Balance tank, pumps, heat exchanger, holding tube, hot water control, valve interconnecting piping. Control system with temperature recorder. • In 4-65/75°C Holding tube -> 25/35°C cheese-making temperature. 4. Buffer tank for pasteurized milk 6.500 liter. • Manufacturer: Zero • Top insulated • Function: To store/ buffer warm milk so that the pasteurizer can continue running and two batches can be processed more quickly directly after each other. 5. Cheese vat • Manufacturer: Damrow (Gea) Double 'O' • Volume: 6.000 liter per batch • Closed cheesevat with whey extraction sieve from above. • Self-priming pump for cip and whey. • Placed on a stainless-steel frame for a free fall to the drainage tank. • Separate control system. • Valve manifold (Tuchenhagen) for importing milk from a pasteurizer or buffer tank, valved design so buffertank can independently be cleanded. 6. Automatic prepressing and cutting vat • Manufacturer: C van ’t Riet • Year of make: 2010 • Including CIP-pump • Capacity of the curd mixture 6.000-liter vat (for curd processing) • Transfer from curd vat: by gravity • Number of cheeses from 6000 liter: 42 cheeses of 15 kg (approximately) 7. Pressing system • Tunnel press, 42 positions for euroblock. • Pall lane system by pneumatic cylinders to convey the moulds automatic in and out of the press. With controls and press program. 8. Moulds • Micro-perforated LAUDE moulds, 15 kg euroblock. • Molds have been partially replaced and are only a few years old. 9. Mould washing • 2 pieces of mould washing bassins 10. Brine • 8 pieces brine cages/racks (without brine boxes, those are cast in concrete) • 2 pieces brine cooling compressor and tanks (on top) 11. Whey tank • Horizontal whey tank (+/- 7.000-liter capacity) 12. CIP-system (fully automatic Siemens S7) • Consisting one tank with three compartments • Heat exchanger • Automatic valves • CIP pressure pump • The entire pre-factory has a fully automatic CIP and automatic control CPU Siemens S7 (support from the original supplier is possible/delivered by Gea)

Condition: new, Year of construction: 2026, functionality: fully functional, CONVEYOR BELT TUNNEL WASHING MACHINE - The components to be clean are carried on a continuos moving stainless steel belt conveyor or a stop and go pallet conveyor. The design transfer time/speed and the tunnel dimensions are design in accordance to customer’s cycle time and production need. The synergy between chemical, thermal and mechanicals actions, enable to create an accurate and high efficient washing removing all contaminants from the components with excellent cleaning results. Dkodpfx Ajwdfnzjktsn The tunnel can be easily inspected thanks to doors installed along the tunnel in correspondence with each active station, the pumping system and filtering devices through stainless steel spray manifolds achieve maximum treatment accuracy and efficiency with stainless steel nozzles of suitable capacity. The spray pressure is controlled by pressure gauges and in regulated by ball valves.

Condition: used, Year of construction: 2016, machine/vehicle number: GA22, Used R&B RECORD 12 wierhooder 12000 BPHTechnical Specifications & Performance DataThe Wirehooder RECORD 12 with double distributor is a high-efficiency machine engineered for securing wire cages on sparkling wine and similar glass bottles in industrial packaging environments. Designed for continuous operation in a used bottling line or as a standalone station, it delivers reliable, second hand performance for beverage production where consistency and throughput are essential.Model: RECORD 12Maximum speed: 12,000 bphRotation direction: Clockwise, left to rightYear of manufacture: 2016Double distributor: Supports 2-leg and 4-leg wire cagesDual magazines: Approx. 6,000 cages eachContainer handling: Designed for Glass bottle handlingAdvanced Automation & Control SystemsEngineered to reduce changeover time and operator intervention, this wirehooder integrates recipe-driven automation and precise handling features. Automated setup routines ensure consistent application quality while maintaining high throughput.Recipe-based automatic height adjustment: Quick format alignment via stored recipesUniversal infeed screw: Automatic setup with recipe for smooth bottle infeedSensors and interlocks: Cap detection (no cage application if no cap) and cage presence detection with machine stopProduction Line Integration CapabilitiesThe RECORD 12 integrates seamlessly into complete bottling and packaging lines for sparkling products. It can operate inline with upstream capping and downstream labeling or inspection systems, supporting a wide range of bottle diameters and heights typically used in sparkling wine packaging.Inline or standalone operation modesCompatible with upstream corking/capping stations and downstream labeling/inspectionEfficient material flow with left-to-right (clockwise) layoutMulti-format flexibility via recipe-based adjustmentsMachine Condition & Maintenance HistoryThis second hand wirehooder is presented in ready-for-operation condition, reflecting robust build quality and dependable performance for industrial packaging uses. It is suitable for rapid recommissioning within a used bottling line.Operational status: Ready for operationCommercially maintained features with functional automation and detection systemsOperational Performance & VersatilityOptimized for sparkling closures, the double distributor manages both 2-leg and 4-leg cages to cover diverse product SKUs. The dual high-capacity magazines sustain longer runs with fewer refills, supporting continuous beverage production.Wire cage formats: 2-leg and 4-legHigh-capacity dual magazines: Approx. 6,000 cages each for extended autonomyConsistent application quality at high speeds up to 12,000 bphIdeal for integration in sparkling wine bottling lines within industrial packaging operationsInstallation Requirements & Site P... Dedpfjy Ef Tyjx Aktokn

Condition: used, functionality: fully functional, load capacity: 10,800 kg, load capacity per storage section: 2,790 kg, frame height: 3,750 mm, construction width: 1,000 mm, Good day, We hereby offer you, without obligation, a used pallet racking system (multi-location system) from Galler, model OMEGA. Manufacturer: Galler Lager- und Regaltechnik GmbH Model: Omega Year of manufacture: unknown Frame load capacity max. 10,800 kg Load capacity per level max. 2,790 kg Frame height: 3,750 mm Frame depth: 1,000 mm Beam length (traverse length): 3,100 and 3,400 mm Scope of delivery: Dedpfsyz A Sxjx Aktjkn - 44 uprights 3,750 x 1,000 x 100 mm (H x D x W) - 215 beams 3,100 mm - 14 beams 3,400 mm - 14 upright impact guards, long, 985 x 120 x 55 mm (L x W x H) - 10 upright impact guards, short, 500 x 120 x 50 mm (L x W x H) - 12 floor corner protectors, green, 500 x 120 mm - 13 floor corner protectors, yellow, 450 x 110 mm - 1 floor corner protector, yellow, 450 x 180 mm - 2 upright double-row impact guards, plate 300 x 250 mm, upright height 350 mm - 24 upright load distributors 1,020 x 110 x 45 mm - 60 upright bases, as new - 21 upright bases, used, good condition - 10 mesh shelves for beams, galvanized, 2,900 x 1,020 x 40 mm - 19 mesh shelves for beams, galvanized, 2,625 x 1,020 x 40 mm - Various smaller mesh shelf pieces for beams, galvanized - 1 lot of distance plates for OMEGA upright bases - 1 pallet upright connector profiles, 900 x 30 x 24 mm Note: The above technical data was taken from the operator's manual, manufacturer brochures, or other sources, for which we cannot guarantee accuracy or completeness. We would be pleased if this pallet racking system is of interest to you. Your service team, Mertens & Frowein GmbH

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, input voltage: 380 V, type of input current: three-phase, input current: 16 A, input frequency: 50 Hz, heating capacity: 87.92 kW (119.54 HP), Drying Tunnel M&R Sprint 2000 (Gas) – 152 cm Belt Width! We offer for sale an industrial screen printing drying tunnel by M&R, model Sprint 2000, type SD2K6012010808, manufactured in 2004, in very good condition. The machine is in continuous operation, fully functional, and ready to work in a professional print shop. Key specifications: - Manufacturer: M&R Printing Equipment (USA) – a global leader in screen printing equipment. - Power supply: Gas (Natural Gas / LP Propane) – an economical solution that significantly reduces production costs compared to electric dryers. - Belt width: 152 cm (60 inches) – ideal for handling two automatic presses simultaneously or large formats (bedding, towels, tablecloths, large prints). - Total length: approx. 850 cm. - Heating chamber length: approx. 366 cm. - Belt condition: Teflon belt in very good condition (refurbished, without damage, runs perfectly). - Electrical supply: 380V / 3-phase. Why choose this machine? This unit is a true workhorse. M&R construction ensures precise temperature control and even drying, which is crucial when working with challenging inks (plastisol, water-based). The device is CE certified. Technical condition: The tunnel is well-maintained, and the heating system works properly. No additional investment required – the belt is in working condition, and the gas burners operate flawlessly. Dsdpfx Asy Evirektekn Additional information: Due to the size, collection in person is required. The machine is available for viewing and testing in operation by prior appointment. This is an excellent opportunity for a print shop looking to increase its capacity while maintaining low operating costs. Voltage: 380 V Current: 16 A Frequency: 50 Hz Number of phases: 3 Motor Full Load Amps (FLA): A Wiring Diagram No.: S63VCS1 Serial No.: 100457715S Machine No.: 1073 Natural gas operating pressure: 5 inches water column LPG/propane operating pressure: 5 inches water column Natural gas manifold pressure: 3.2 inches water column LPG/propane manifold pressure: 1.3 inches water column Maximum heat input: 300,000 Btu/hr Minimum heat input: 40,000 Btu/hr

Condition: repair required (used), Year of construction: 2016, functionality: not functional, machine/vehicle number: 107965, Technical characteristics: Work Area - Maximum diameter of the clamping plate: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel path: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel path: 375 mm / Rapid traverse in Z: 30 m/min - Standard enclosed automation (number of loading nests in relation to part diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle interface according to DIN 55026: Size A5 - Maximum rotational speed: 6000 rpm Dkedpfx Aexw Sviekton - Power at 100% / 40% duty cycle: 18.1 / 13.9 kW - Torque at 100% / 40% duty cycle: 77 / 59 Nm Tool Turret with Driven Tools - Tool shank as per DIN 69880: 12 positions - BMT65 - Number of positions: 12 - Maximum tool length including holder: 190 mm - Maximum speed: 6000 rpm - Maximum torque at 10% duty cycle: 27 Nm, at 100% duty cycle: 14 Nm Electrical Equipment - Operating voltage: 400 - 480 V, 80 A - Connected load: 27 kVA Dimensions - Total machine dimensions: Length = 4350 mm (with chip conveyor), Width = 1600 mm, Height = 2500 mm - Weight: 5500 kg Main Features and Capabilities: - Vertical construction: Optimized chip removal and easy loading/unloading - CNC controller: GE Fanuc FS 32i B - High precision: Axis positioning accuracy in X, Z ±0.001 mm (Heidenhain linear scales) - Main spindle: High power and wide speed range - Process control: Marposs T25 measuring probe - Automated loading/unloading: Parts are loaded and removed via integrated automation system - Live tooling: Enables drilling and milling operations in addition to turning - Tool life monitoring with sister tool management - Chip conveyor & coolant filtration system Knoll with paper filter and 40 bar pumps (capable of filtering 2 machines) - Fully enclosed work area; integrated work lighting - Documentation: Available electronically; hardcopy manuals incomplete Machine status: NOT WORKING - Live tool drive motor - Safety locking mechanism (Euchner) for loading door - Turret drive motor - Turret motor driver - Lubrication pump - Hydraulic manifold (4x electrovalves) - Lubrication pressure system - Rotary union - Hydraulic cylinder for loading door - Spindle clamping/unclamping sensor

Condition: used, Westtech Woodcracker C250 Immediately available Year of manufacture: 2022 Cutting diameter softwood (mm): 300 Cutting diameter hardwood (mm): 280 Grapple opening (mm): 930 Shear opening (mm): 450 Net weight (basic – fully equipped) (kg): 580-970 Recommended hydraulic flow (l/min): 50-100 Recommended hydraulic flow for auxiliary functions (l/min): 35-50 Recommended operating pressure (bar): 280 Carrier vehicle service weight* (t): 7-15 Multigrip: integrated Optional: Autospeed Optional: Twin-cylinder slew drive: 2 x 48° Optional: Continuously rotatable tiltator Optional: Collector Adapter plates (MS01 / MS03 / MS08 / etc.) available on request. We are an official Westtech Woodcracker distributor and service partner, Magni telehandler distributor and service partner, JCB construction equipment distributor and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range! Rental available Dkjdpfxoyfq U Us Aktsn = Further information = New: Yes Please contact Tobias Ebert for more information.