Used San Ou Faceplate for sale (4,787)

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. Nsdpfxoyxr T Tj Akujlb The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 320 h, functionality: fully functional, machine/vehicle number: Serien Nr.000025, arm reach: 1,850 mm, feed length X-axis: 3,000 mm, total width: 1,200 mm, total length: 3,000 mm, type of cooling: water, working width: 2,100 mm, working length: 6,000 mm, KUKA KR30 robot cell with linear axis and positioner – partial sale possible Package 1 KUKA KR30 robot 3m linear axis / longitudinal carriage KUKA DKP400 positioner Price: EUR 58,000 (negotiable) Package 2 Meltio Engine metal printing / laser cladding system Price: EUR 68,000 (negotiable) For sale is a high-quality KUKA robotics cell for industrial applications in the following areas: Automation Robotic welding Special machine construction Additive manufacturing / laser cladding Components of the system KUKA KR30 robot 3m linear axis / longitudinal carriage KUKA DKP400 positioner Control system and accessories Optional with Meltio Engine system Flexible sales options The system can be sold: as a complete system or modularly / individually. Possible configurations: KUKA KR30 incl. linear axis Positioner sold separately Complete robot cell Optional with Meltio Engine Technical highlights Industrial quality from KUKA Stable DKP400 positioner 3m longitudinal carriage Versatile integration Ideal for automation and welding applications Nedjyk D T Uopfx Akuelb The system is ideally suited for: Robotic welding Automation solutions Research and development projects Training and educational purposes Further information, technical data, and on-site inspections are available upon request. Partial sale possible. Support for transport, commissioning, or integration can be provided upon agreement.

Condition: used, functionality: fully functional, Year of construction: 2011, operating hours: 7,641 h, load capacity: 2,000 kg, lifting height: 5,750 mm, free lift: 1,920 mm, fuel type: gas, mast type: triplex, construction height: 2,560 mm, drive type: Treibgas, Internal combustion forklift Mast type: Triplex Njdpfx Ajy Tq H Uokujlb Technical condition: normal Front tire type: Superelastic Rear tire type: Superelastic Side shifter, 3rd valve.

Condition: ready for operation (used), Year of construction: 2008, travel distance X-axis: 850 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 750 mm, Fanuc 21IMB control system 2 pallets, 500x500 mm travel distances: 850x700x750 mm Nedpfsy Tagdox Akujlb 60-tool changer

Condition: excellent (used), Year of construction: 2003, total length: 6,060 mm, total width: 2,440 mm, total height: 2,590 mm, Consani 20FT ISO Tank Container 24,980L / 1 compartment UN Portable T11 Bottom discharge Steam heating TCG 316 L 22K5 Design temperature: -40° to +130° Valid 2.5-year + CSC inspection until 08-2026 = Further Information = Nledpfoy Sxl Aox Akujb General Information Year of manufacture: 2003 Model year: 2003 Permitted cargo: Chemicals, construction water, fuel, wastewater Weights Tare weight: 3,650 kg Payload: 33,350 kg Gross weight: 36,000 kg Functional Compartment volume: 24,690 l Body make: Van Hool 24,690L TC, 2 compartments (12,290L/12,400L), L4BN, IMO1, T11 Number of compartments: 2 Condition Technical condition: very good Visual condition: very good Further information Contact Arne Honingh for more information.

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, For technical data, see images.... Nlsdpfxoy Tl N Re Akueb

Condition: ready for operation (used), Year of construction: 2011, operating hours: 953 h, spindle speed (max.): 2,800 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,350 mm, spindle motor power: 22,000 W, controller manufacturer: FANUC, controller model: i-series, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2011. This DOOSAN Puma 2600L features a maximum turning diameter of 481 mm and a turning length of 1,280 to 1,310 mm, depending on the chuck. It includes a robust spindle speed of up to 2,800 RPM and a tool turret with 12 positions. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma 2600L machine we have for sale. Contact us for further details. • Capacity & Reach • Maximum turning diameter: ø 481 mm • Maximum turning length: 1,280–1,310 mm (depending on the chuck) • Turning diameter above the bed: ø 780 mm • Bar bore/capacity: ø 76 mm Nsdpfxsy T Ndfo Akuslb • Main Spindle • Chuck (jack plate) diameter: 254 mm (10 inch) • Spindle bore: ø 86 mm • Spindle nose: A2-8 • Tool Changer • Turret: 12 stations • Rapid traverse (X/Z): 30 m/min Additional equipment • Note: Tools are excluded (can be purchased for an additional amount) Technical Specification Counter Spindle No Driven Tools No

Condition: ready for operation (used), Year of construction: 2014, travel distance X-axis: 762 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: Sinumerik 828D, table load: 600 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of slots in tool magazine: 30, tool weight: 8,000 g, number of axes: 3, This 3-axis DOOSAN DNM 400 II was manufactured in 2014. It features an X-axis travel of 762 mm, Y-axis travel of 435 mm, and Z-axis travel of 510 mm. The machine includes a worktable with dimensions of 920 mm x 435 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 400 II vertical machining centre we have for sale. Contact us for further details. • Capacity and travels: • Spindle nose to table: 150–660 mm • Worktable: • Size: 920 x 435 mm (36.2" x 17.1") • Spindle: • Max torque: 117 N·m (86.3 ft-lbs) • Taper: BIG-PLUS Dual Contact #40 (BT40 / CAT40) • Cooling: Through-spindle coolant (included) • Automatic Tool Changer (ATC): Nedpfx Ajy T I Snekuolb • Capacity: 30 tools (cam-type double arm) • Tool-to-tool time: 1.3 s • Max tool length: 300 mm • Feed rates and motion: • Rapid traverse (X/Y): 36 m/min (1,417 IPM) • Rapid traverse (Z): 30 m/min (1,181 IPM) • Max cutting feedrate: 10,000 mm/min Additional equipment • Workpiece clamps, tools, and toolholders available at additional cost (not included) Technical Specification Taper Size BT 40

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,200 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Nedpfey S Uxfex Akuelb Number of valves: 3 Supply voltage: 80 V CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,09x1,47x2,75 Additional information Please contact Stephan Honinx or Dietmar Pack for more information = Additional options and accessories = - 3rd valve - Battery charger - Free lift - Super elastic tyres

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, lifting height: 6,050 mm, free lift: 1,930 mm, fuel type: electric, mast type: triplex, power: 22 kW (29.91 HP), fork length: 1,800 mm, Weights Empty weight: 8.700 kg Functional Lifting capacity: 5.000 kg Maximum passing height: 275 cm Number of valves: 3 Supply voltage: 80 V CE mark: yes Maintenance, history and condition Number of owners: 1 Technical condition: very good Visual appearance: very good Other information Front tyres / undercarriage remaining: 80 Rear tyres remaining : 80 Front tyre size: non-marking Rear tyre size: non-marking Fork carriage: Sideshifter Transport dimensions (LxWxH): 3,09x1,47x2,75 Additional information Please contact Stephan Honinx, Dietmar Pack or Simon Pack for more information Nodpsy S Uw Uefx Akuelb = Additional options and accessories = - 3rd valve - 4th valve - Battery charger - Free lift - Super elastic tyres

Condition: used, mileage: 173,100 km, power: 140 kW (190.35 HP), fuel type: diesel, gearing type: automatic, maximum load weight: 950 kg, first registration: 10/2017, loading space length: 1,600 mm, emission class: euro6, color: black, number of seats: 5, Year of construction: 2017, - Used Truck: Nissan Navara, Double Cab 5 seats 4WD N-Connecta with HardTop. - Year: 10.2017, Engine: 2.3 dCi 190 hp Euro 6, Automatic transmission, Mileage: 173,100 km. - 5-seater pick-up, glassed HardTop, tie-down hooks in the load area. Selectable 4WD with low range, electronic selector, and rear differential lock. - N-Connecta trim, equipped with: automatic climate control, touchscreen radio with Bluetooth, USB, and navigation system. 18'' alloy wheels, fog lights, cruise control, 360° parking cameras, Keyless System. Rear tinted windows, onboard computer, two keys, spare wheel. - Bodywork with some scratches (front bumper, right side), interior in good condition. - Mechanically sound, with slight power drop between 2,000 and 3,000 rpm. - Brand new front and rear tires, inspection valid until October 2027. _____ Nodeyy Niuspfx Akuslb CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Mon to Fri: 8:30 / 12:15 - 14:00 / 19:00. Saturday: 8:30 / 12:00 - 14:00 / 17:00. - Certified mileage. - Test drive available by appointment. - Ownership transfer at our office. - Tailored financing options available. Carlo Mauri S.r.l. declines all responsibility for any unintentional discrepancies present in the advertisement, which does not constitute any contractual commitment. The displayed prices are exclusive of VAT and registration fees.

Condition: used, mileage: 173,100 km, power: 140 kW (190.35 HP), first registration: 10/2017, fuel type: diesel, maximum load weight: 950 kg, color: black, gearing type: automatic, emission class: euro6, number of seats: 5, loading space length: 1,600 mm, Year of construction: 2017, - Used Truck: Nissan Navara, Double Cab 5 seats 4WD N-Connecta with HardTop. - Year: 10.2017, Engine: 2.3 dCi 190 hp Euro 6, Automatic transmission, Mileage: 173,100 km. - 5-seater pick-up, glassed HardTop, tie-down hooks in the load area. Selectable 4WD with low range, electronic selector, and rear differential lock. - N-Connecta trim, equipped with: automatic climate control, touchscreen radio with Bluetooth, USB, and navigation system. 18'' alloy wheels, fog lights, cruise control, 360° parking cameras, Keyless System. Rear tinted windows, onboard computer, two keys, spare wheel. - Bodywork with some scratches (front bumper, right side), interior in good condition. - Mechanically sound, with slight power drop between 2,000 and 3,000 rpm. - Brand new front and rear tires, inspection valid until October 2027. Nlsdeyx Smmspfx Akusb _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como) Lombardy Opening hours: Mon to Fri: 8:30 / 12:15 - 14:00 / 19:00. Saturday: 8:30 / 12:00 - 14:00 / 17:00. - Certified mileage. - Test drive available by appointment. - Ownership transfer at our office. - Tailored financing options available. Carlo Mauri S.r.l. declines all responsibility for any unintentional discrepancies present in the advertisement, which does not constitute any contractual commitment. The displayed prices are exclusive of VAT and registration fees.

Condition: used, mileage: 270,100 km, power: 110 kW (149.56 HP), first registration: 06/2009, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro4, number of seats: 3, loading space length: 5,000 mm, loading space width: 2,280 mm, loading space height: 2,300 mm, Year of construction: 2009, - Used truck: Nissan Atleon 35.15 with tarp body. - First registration: 2009, Engine: 3.0 TDI 150 HP Euro 4, Mileage: 270,100 km. - Gross vehicle weight: 3,500 kg, Twin rear wheels, Reinforced rear leaf springs. - Body configuration: Semi-box body with tarpaulin roof and lift/lower system (not working). External dimensions: 5,000 x 2,280 x h. 2,300 mm. Anteo retractable tail lift (not working). - Equipped with: Electric windows, Dual keys, and Spare wheel. - Bodywork in fair condition, Intact interior, Mechanically sound. - Roadworthiness certificate valid until 2028. _____ CARLO MAURI S.r.l. - Lurago d'Erba - Via Vallassina 6 - Tel. 031.699.049 - Sales contacts: Emanuele, Luca, Giuseppe, Davide. - Lurago d'Erba (Province of Como), Lombardy. Opening hours: Monday to Friday: 8:30 / 12:15 - 14:00 / 19:00, Saturday: 8:30 / 12:00 - 14:00 / 17:00 - Certified mileage. - Test drive available by appointment. - Ownership transfer available on site. - Tailored financing options available. Carlo Mauri Srl accepts no responsibility for any unintentional discrepancies in this advert, which does not represent a contractual commitment. Prices listed are exclusive of VAT and ownership transfer costs. Njdpsyz Ilkjfx Akujlb

Condition: ready for operation (used), Year of construction: 2017, operating hours: 2,896 h, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, total height: 1,700 mm, total width: 1,628 mm, overall weight: 3,600 kg, controller manufacturer: FANUC, controller model: i-series, product length (max.): 2,834 mm, number of axes: 3, This 3-axis DOOSAN Puma GT 2100M was manufactured in 2017. It features a maximum turning diameter of 300 mm and a turning length of 513 mm. The machine is equipped with 12 tool stations and offers rapid traverse speeds of 24 m/min in the X-axis and 30 m/min in the Z-axis. If you are looking to get high-quality turning capabilities, consider the DOOSAN Puma GT 2100M horizontal turning machine we have for sale. Contact us for further details. • Swing over bed: 600 mm • Swing over saddle: 390 mm • Recommended turning diameter: 210 mm • Max. turning diameter: 300 mm • Max. turning length: 513 mm • Bar working diameter: 65 mm • Spindle nose: ASA A2-6 • Spindle bearing diameter (front): 110 mm • Spindle through-hole diameter: 76 mm • Minimum spindle indexing angle (C-axis): 0.001° • Number of tool stations: 12 • OD tool size: 25 mm • Boring bar diameter: 40 mm • Indexing time (1st swivel time): 0.15 s • Rotary tool spindle speed: 5,000 rpm • Rapid traverse (X-axis): 24 m/min • Rapid traverse (Z-axis): 30 m/min • Quill diameter: 80 mm • Quill bore taper (live): MT4 • Quill travel: 80 mm • Electric power supply: 30.43 kVA Additional equipment • None specified (no robots, automation or bar feeder listed) • Tools excluded; available at additional cost Technical Specification Nsdpfxsy Tx S Ss Akujlb Driven Tools Yes Counter Spindle No

Condition: good (used), Year of construction: 2006, turning length: 305 mm, turning diameter: 320 mm, travel distance X-axis: 175 mm, travel distance Z-axis: 330 mm, rotational speed (max.): 5,000 rpm, quill diameter: 65 mm, quill stroke: 80 mm, bar passage: 51 mm, FANUC i Series control system Turret with 12 stations (non-driven) Tailstock Chip conveyor Nsdpjy S U Dhefx Akujlb Bar feeder IEMCA BOSS 545/32 E

Condition: used, Year of construction: 2013, DOOSAN LYNX 300 M LATHE WITH LIVE TOOLING YEAR: 2013 SWING DIAMETER OVER BED: 651 mm SWING DIAMETER OVER CARRIAGE: 461 mm RECOMMENDED TURNING DIAMETER: 254 mm MAX. TURNING DIAMETER: 370 mm BAR CAPACITY: 76 mm TRAVELS: X: 255 mm Nlsdsy Skv Hspfx Akusb Z: 790 mm SPINDLE SPEED: 3,500 RPM SPINDLE MOUNT: ASA – 8 TOOL TURRET: 12 POSITIONS TAILSTOCK 2 LIVE TOOLS SUPPLIED (RADIAL + AXIAL) CHIP CONVEYOR COMPLETE WITH ALL DOCUMENTATION

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, operation weight: 33,500 kg, Year of construction: 2013, operating hours: 7,400 h, Sandvik QH331 cone crusher 2013 year 7400 hours on Nodpfex E Ruvsx Akuelb Inlet 195 mm Engine CAT C9.3 CSS range from 0-20 to 0-65 mm Sand blasted and painted Capacity 100-150 tons per hour depend on material Weight 33,5 tons Fitted with metal detector Machine in very good working condition, ready for work

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 382, Log sawing line with infeed and outfeed conveyors, 2 x 2 electrically movable sawblades, sawblade diam 970 mm, Nodpfxjxwyzge Akuolb main el.motors 2 x 45kW. Log length 0,8 - 8 m, max log diam 40 cm, original electric cabinet, line is still under power and can be demo started up, line has been in operation totally 3-4 years

Condition: used, power: 127 kW (172.67 HP), fuel tank capacity: 255 l, color: orange, lifting height: 2,750 mm, Year of construction: 2014, operating hours: 6,540 h, Empty weight: 14.400 kg Dimensions (LxBxH): 772 x 264 x 328 cm Engine type: Doosan Doosan DL06K Tier IIIB Bucket volume: 2.5 m^3 Nlodpfx Aey Takiekueb

Condition: excellent (used), Year of construction: 2023, working width 1300 mm workpiece height max. 3 - 140 mm Control Xinje XD5 min/max. pitch cone length 200 - mm total power requirement 13,4 kW weight of the machine ca. 4,5 t dimensions of the machine ca. 5,1 x 2 x 2,3 m Nodpfx Asylp A Djkuelb

Condition: excellent (used), power: 124 kW (168.59 HP), operation weight: 22,100 kg, chain condition: 70 %, Year of construction: 2019, operating hours: 10,131 h, Equipment: air conditioning, cabin, Doosan DX225LC-5 Year: 2019 Operation hours: 10.131 hrs. ROPS Protection Cabine Airco Radio Back drive camera Central lubrication Monoboom Stick: 2,90 m. All hydr. lines (hammer-, gripper-, scissor line) Njdjy T Hy Repfx Akujlb quick coupler OQ70/55 1x bucket – 700mm width u/c: approx. 60-70% good trackshoes: 600 mm width engine with 124kW CE Operation weight: 22.1 to

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,190 kg, fuel type: diesel, nominal power (apparent): 440 kVA, The unit is used as a backup and is only operated occasionally. Nlsdpfxjy Ufpao Akuob

Condition: ready for operation (used), Year of construction: 2019, travel distance X-axis: 730 mm, travel distance Y-axis: 730 mm, travel distance Z-axis: 880 mm, controller manufacturer: FANUC, spindle speed (max.): 20,000 rpm, spindle motor power: 37,000 W, number of axes: 4, This 4-axis DOOSAN NHP 5000 was manufactured in 2019. It features impressive axis travels of 730 mm in both X and Y directions, and 880 mm in Z. The machine is equipped with a FANUC 31i-B control system and offers rapid traverses of 60 m/min. If you are looking to get high-quality machining capabilities, consider the DOOSAN NHP 5000 horizontal machining centre we have for sale. Contact us for further details. • Rapid traverses • X/Y/Z: 60 m/min • Cutting feedrate: 1–30,000 mm/min • Ballscrews: Ø45 x P20 • Accuracy • Positioning: ±0.003 mm (full stroke) • Repeatability: ±0.0015 mm • Measurement system • X/Y/Z/B: absolute pulse encoders • Optional linear guides on X, Y, Z • Distances • Spindle nose to table center: 100–980 mm • Spindle center to pallet surface: 80–810 mm • Spindle • Speed: • Standard/high-torque: 15,000 rpm • High‑speed option: 20,000 rpm • Base speed: • Standard: 1,200 rpm • High‑speed option: 1,800 rpm • Motor power: • Standard: 30 / 22 / 18.5 kW • High torque option: 37 / 26 / 22 kW • High‑speed option: 37 / 30 / 26 / 18.5 kW • Max. torque: • Standard: 229.9 / 206.9 / 147.2 / 119.4 Nm • High torque: 303 / 261 / 204 / 147 / 119 Nm • High‑speed option: 221 / 200 / 156 / 98.1 / 79.6 Nm • Tool clamping force: 9.8 kN (15.7 kN with HSK spindle) • Transmission: Integrated drive • Axis motors • X: 5.5 kW (7.37 hp) • Y: 4.5 kW (6.03 hp) • Z: 5.5 kW (7.37 hp) • B indexing motor: 1.4 kW (1.88 hp) • B 0.001° motorized: 2.7 kW (3.62 hp) • B axis / rotary table • Indexing: 1° indexing; 0.001° rotary table Nledey Tluaspfx Akusb • Positioning accuracy: ±3" (±6" for rotary table) • Repeatability: ±1" (±4" for rotary table) • Max rapid rotation: 30 rpm • Clamping force: 93 kN • Clamping torque: 4327 Nm • Pallet • Size: 500 x 500 mm • Type: Threaded pallet; T‑slot pallet • Pattern: 24‑M16 x P2.0; 5‑18H8 • Machine travels reference • X/Y: 28.74" • Z: 34.65" Technical Specification Taper Size ISO 40

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BT40 - Spindle power : 15 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 762 x 516 x 570 [mm] - Rapid traverses rates (X/Y/Z) : 40 / 40 / 36 [m/min] TOOL CHANGER - Auto. Tool Changer type : Bras chargeur - Tool magazine capacity : 30 - Tool exchange time : 1,3 [sec] PALLET CHANGER - Pallet size : 860 x 570 [mm] - Pallets number : 2 - Pallet exchange time : 5 [sec] POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 40,25 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 3130x3260 [mm] - Machine height : 3130 [mm] - Machine weight : 9200 [kg] EQUIPMENT - CNC : Fanuc 0i-MD Interface : PCMCIA, RS232 / RJ45 - 3 colors status lamp - Coolant tank * with high-pressure pump : 20 [bars] Nedsy Tzcyopfx Akuslb - Coolant through spindle - Spindle cooling unit - Chips conveyor - Electric transformer

Condition: ready for operation (used), functionality: fully functional, gearing type: automatic, fuel type: diesel, color: orange, overall weight: 31,500 kg, empty load weight: 31,500 kg, operation weight: 31,500 kg, maximum load weight: 20,000 kg, lifting height: 10,400 mm, tire condition: 90 %, drive condition: 90 %, chain condition: 90 %, number of seats: 1, Year of construction: 2022, operating hours: 6,000 h, Equipment: air conditioning, cabin, hammer hydraulics, onboard computer, steel tracks, For sale: Develon DX300LC-7K in excellent condition, the machine is practically like new and fully functional. Very powerful, reliable, and comfortable-to-operate excavator, ideal for earthmoving, excavation, quarry, and construction work. Specifications: • Operating weight: approximately 31.5 tonnes • Maximum boom height: about 10.4 meters • Powerful and economical engine • Fully operational machine • No play or leaks • Always regularly maintained • Comfortable cab with excellent visibility • Ready to work immediately Nlodpfoy Rymxsx Akusb The machine is in great general condition, both mechanically and aesthetically. More photos and videos can be provided upon request. For more information, please contact us.