Used Alpina 200 for sale (15,648)

Condition: used, Year of construction: 2023, operating hours: 725 h, axle configuration: 4x4, fuel type: diesel, Equipment: all wheel drive, Drive: Wheel Empty weight: 10.050 kg Mast: articulated arm Lifting capacity: 230 kg Working height: 2.000 cm Rental currency: EUR Please contact KEY-TEC Sales for more information Ledpfjy Rw E Sjx Akuohg

Condition: like new (used), Year of construction: 2022, operating hours: 12,719 h, travel distance X-axis: 2,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 850 mm, feed length X-axis: 2,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 850 mm, nominal power (apparent): 21 kVA, controller manufacturer: Heidenhain TNC 640 mit CELOS, workpiece weight (max.): 2,000 kg, total height: 3,200 mm, total length: 4,500 mm, total width: 7,100 mm, table width: 850 mm, table length: 2,350 mm, rotational speed (min.): 15,000 rpm, spindle speed (min.): 15,000 rpm, Year of construction: 2022 CNC controller: Heidenhain TNC 640 mit CELOS Axes X-axis travel mm: 2000 Y-axis travel mm: 800 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: ±120 Rapid traverse m/min: 50 Acceleration in the axes m/s2: 5 Worktable Table dimensions mm: 2350x850 Max. workpiece weight kg: 2000 Milling/turning table nc: Table dimensions mm: Ø800 Max. workpiece weight kg: 800 Table rotation speed rpm: 50 Spindle Spindle speed rpm: 15000 Spindle drive power kW: 21/16 (40%ED/cont) Spindle torque Nm: 111/85 (40%ED/cont) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: SK 40 Tool magazine slots: 40 Tool changer: Double gripper With free neighboring places mm: 130 Ljdpey Shgvsfx Akujhg With occupied neighboring places mm: 80 Max. Tool Length mm: 400 Max tool weight kg: 8 Chip-to-chip time s: from 7,5 Equipment Chip conveyor Rigid table with integrated rotary table Infrared probe Internal cooling lubricant supply Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Mist collector NC swivel rotary table Preparation for the use of the 3D quickSET MPC – Machine Protection Control Automatic door Automation interface Machine running times Under power: 18669 Spindle Working: 12719 Basic machine dimensions / weight Length mm: 4500 Width mm: 7100 Height mm: 3200

Condition: used, Year of construction: 1984, turning diameter over cross slide: 1,600 mm, turning diameter: 2,000 mm, turning diameter over bed slide: 2,000 mm, turning length: 35,000 mm, workpiece weight (max.): 63,000 kg, Center Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of manufacture: 1984 Tandem construction on one bed, with left and right headstocks Faceplate double tailstock left and right Double carriage Steady rest included Roller rest included Operator panel with scales requires attention and replacement Motorized tailstock for each side (left and right) 3-bed way design Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Industries served: - Shipyards - Propeller shaft manufacturing - Hydraulic cylinder shafts - Camshafts - Defence & Aerospace - Rolls and shafts for steel mills - Crankshafts Lhodpfx Akeynky Aeusg Specifications Metric / Imperial Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: Ø 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Max spindle speed: 180 rpm Feed X-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Approximate dimensions: Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend verifying all important details.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, displacement volume: 41 cm³, injection pressure: 2,800 bar, injection weight: 37 g, mold height (min.): 210 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Lhjdpfxoy Tvvnj Akusg Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: good (used), Year of construction: 2015, operating hours: 3,572 h, load capacity: 2,000 kg, fuel type: electric, empty load weight: 1,200 kg, mileage: 3,572 km, This electric ride-on pallet truck by ATLET is from 2015. The pallet truck has a capacity of 2,000 kg and is equipped with long forks of 1,600 mm. It features a 2015 battery WITHOUT CHARGER and has 3,572 operating hours on the clock. Schedule a test drive or order the pallet truck in our webshop! Ljdoy R Amzspfx Akushg

Year of construction: 2011, condition: used, For especially high PVC or aluminum profiles Lhsdjy Sh D Ispfx Akusg Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed Weight: approx. 300 kg

Condition: used, mileage: 2,024 km, power: 90 kW (122.37 HP), fuel type: electric, gearing type: automatic, overall weight: 2,390 kg, first registration: 10/2023, next inspection (TÜV): 01/2028, emission class: euro6, color: silver, suspension: steel, number of seats: 5, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, traction control, LG7 LED High Performance Headlights, Z6L Progressive, E07 Hill Start Assist, E2Z MBUX multimedia system incl. navigation & DAB, FR8 reversing camera, E1K Navigation Package, EX8 Navigation Plus, EY5 Mercedes-Benz emergency call system, SD1 i-Size child seat attachment, EY6 Breakdown management, B25 electric parking brake, EI0 wireless charging system for mobile devices, T68 child safety locks for doors and windows in passenger compartment, Z1M M1 registration, IA0 wheel configuration 4x2, EZ5 Park Package, XO7 Mercedes-Benz Mobilo with DSB and GgD, T78 sliding door rail cover painted in vehicle color, Y10 first aid kit, VL2 velour floor mats, SF6 driver’s seat height-adjustable with lumbar support, RD9 tires without specified brand, H00 warm air duct to passenger compartment, NM5 MB-NA 60 2b with flange, lowered configuration, M speed, C6L multifunction steering wheel, H22 heated rear window, JW8 ATTENTION ASSIST, EM7 2 USB outlets in rear center console, Y44 warning triangle, GA2 automatic transmission for electric drive, P2F Active Safety Package, FP3 Mirror Package, FP4 Chrome Interior Package, XC8 externally visible VIN, SZ6 table and illuminated decorative elements on seat backrest, JH3 communication module (LTE) for digital services, X30 Registration Certificate, Part II, FQ3 lockable glove compartment passenger side, I5T plastic underbody protection, RY2 wireless tire pressure monitoring for front and rear axles, CK4 handle strip above license plate in vehicle color, 053 AEJ X2/2, CK8 heated steering wheel, XU1 signs / documentation in German, IG4 standard, SK5 automatic passenger airbag. We are happy to prepare a tailored financing or leasing offer and will accept your pre-owned vehicle in trade-in. We look forward to welcoming you at our dealership for further consultation. Vehicle condition in line with age / mileage, refinishing was carried out on the vehicle as part of the reconditioning process. No liability for printing or typographical errors. Subject to errors and prior sale. ... more on our homepage Lhedpfjy Ahl Tsx Akujg

Condition: good (used), functionality: fully functional, input voltage: 400 V, overall weight: 1,500 kg, total width: 1,400 mm, total length: 1,175 mm, input frequency: 50 Hz, electrical fuse: 16 A, type of input current: three-phase, Lifting Kneader Model: D 200 a Diosna removable kneader Lhodpfot Em E Iox Akuog Dough machine with flour dust cover 2 bowl trolleys 2 speeds, with safety circuit Connection 400V, 16A CEE plug Used machine We have many lifting kneaders in stock!

Condition: used, Year of construction: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Mitre range vertical: 60° - 90° - 30° Lhjdpfxey S Rrbj Akueg Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2,800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Condition: used, Year of construction: 2000, Cutting height at 90°: 200 mm Cutting length: 410 mm Horizontal miter range: 45° - 90° - 25° Vertical miter range: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Dust extraction port: 100 mm Feed brake: yes Machine length: Lsdpsy S Rq Refx Akujhg Machine width: Weight: 300 kg

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Lhodpfxsyuw Srj Akueg Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor Lhodpfxewiri Ao Akujg - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 1994, Mawera RZM 200 Main motor: 22 kW with electronic soft start Ledpfxoy T Ih Ne Akuehg Automatic idling shutdown Hydraulics: 1.0/1.4 kW, reversible Hopper opening: 844 x 1000 mm All-steel pipe: 270 mm Ø Rotor speed: 135 rpm Chopping teeth: 30 pieces, replaceable Chopping capacity: 500-850 kg/h Extraction: 30-35 m/s Weight: 2100 kg (without control cabinet) Control cabinet: with PLC microprocessor control 30 pieces, replaceable 500-850 kg/h with PLC microprocessor control Operating hours: only 2562 Difference between RMO and RZM: The RMO is an older model, a classic found on the used market. The RZM 200 is its modern evolution – more robustly built, intelligently controlled, easier to maintain, and more efficient when processing modern wood waste and pallets.

Condition: excellent (used), Year of construction: 2007, turning length: 1,545 mm, turning diameter over cross slide: 660 mm, spindle bore: 65 mm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,545 mm, Make: MAZAK Type: INTEGREX 200-4 ST Control: MAZATROL MATRIX Year: 2007 Multi-Tasking Machining in a Single Machine Setup Sub spindle for overtaking with full C-Axis The INTEGREX IV series can finish all machining processes. High speed, advanced milling spindle that can tilt up to 240 degrees swiveling. Lower turret with rotary tool spindle so livew tooling Chip conveyor with coolant and 15 Bar iKZ Double chuck KNCS-N 210-53 SMW Autoblock MAZAK Flex -GL150F Gantry Loader Gripping range 200 x 120 length x 15 Kg Max. turning Ø: 660mm X-Axis: 580mm Y-Axis: 160mm Z-Axis: 1545mm B Axis: 270° Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 22kW Subspindle speeds:5000Rpm Subspindle bore: 65mm Subspindle power: 18.5kW ATC / revolver: 40 B-Axis Toolsystem:Capto C6 B-Axis Speedranges:12000Rpm Length: 5200mm Width: 2550mm Height: 2600mm Lsdpsx S Hm Ijfx Akuehg Weight: 14000kg

Condition: good (used), Year of construction: 2009, travel distance X-axis: 1,120 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 36,000 m/min, table width: 510 mm, table length: 1,460 mm, table load: 800 kg, Renishaw measuring probe MP-12 IKZ 15 Bar Interface set Performabnce software package Monitoring B prepared not included Ledjw Rm Dijpfx Akujhg X - Travel: 1120mm Y - Travel: 510mm Z - Travel: 510mm Table Length: 1460mm Table Width: 510mm Table load: 800 Feed rate X-Axis: 36000mm/min. Feed rate Y-Axis: 36000mm/min. Feed rate Z-Axis: 36000mm/min. Spindle Taper: 40ISO/Bt/Mk Power on spindle: 18.5kW Speeds / ranges: 12000Rpm ATC / revolver: 30 Coolant through spindle / Bar:Yes Number of controlled axis: 3 Chip conveyor: Yes Coolantsystem: Yes Length: 3300mm Width: 2850mm Height: 2800mm Weight: 6100kg

Condition: good (used), Manufacturer: MAZAK Type: Integrex 200-4 S Control: MAZATROL MATRIX Year of Manufacture: 2010 Specifications Metric US Standard Max. turning diameter 660 mm X-axis 580 mm Y-axis 160 mm Z-axis 1045 mm B-axis 225° Spindle bore 82 mm Spindle speed 5000 rpm Ljdpfowpufgex Akuehg Spindle power 18.5 kW Counter spindle speed 6000 rpm Counter spindle bore 82 mm Counter spindle power 18.5 kW Tool changer 80 Driven tool speed 12,000 rpm Dimensions (estimated) Length 4500 mm Width 2400 mm Height 2900 mm Weight 9200 kg Please note: The information on this page was obtained to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or contractual terms. We recommend you check all important details.

Condition: excellent (used), Year of construction: 2007, turning length: 535 mm, spindle bore: 65 mm, travel distance X-axis: 225 mm, travel distance Z-axis: 535 mm, spindle motor power: 26,000 W, total height: 1,900 mm, total length: 2,900 mm, total width: 2,300 mm, overall weight: 4,380 kg, CNC Lathe MAZAK - QTN 200-II MACH-ID 9481 Make: MAZAK Type: QTN 200-II Control: Mazatrol Matrix Nexus Year: 2007 Max. turning Ø:610mm X-Axis: 225mm Z-Axis: 535mm Spindle bore: 65mm Speedrange: 5000Rpm Spindle power: 26kW ATC / revolver:12 Chip conveyor: Yes Tool eye: Yes Lsdpfx Aeyyxh Tjkuehg Hours: 5049H Length: 2900mm Width: 2300mm Height: 1900mm Weight: 4380kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2017, operating hours: 67 h, spindle motor power: 22,000 W, spindle speed (max.): 3,300 rpm, travel distance X-axis: 615 mm, travel distance Y-axis: 260 mm, travel distance Z-axis: 1,585 mm, overall weight: 16,600 kg, controller manufacturer: MAZATROL, number of axes: 5, This 5-axis Mazak INTEGREX i-200 S was manufactured in 2017. It features full 5-axis simultaneous machining, a maximum machining diameter of Ø658 mm, and a maximum machining length of 1519 mm. The machine includes a robust tool magazine capacity of 72 positions and is equipped with both main and second spindles for enhanced capabilities. If you are looking to get high-quality turning and milling capabilities, consider the Mazak INTEGREX i-200 S turn-mill centre. Contact us for further details. • Operating time: Approx. 68 hours • Availability: Immediate • Key capabilities: • Full 5‑axis simultaneous machining • Main spindle + second spindle • Milling spindle with automatic tool changer • Complete turning and milling in one setup • Capacity and working range • Max swing: Ø658 mm Lhjdpoy Sltgsfx Akueg • Swing over cross slide: Ø658 mm • Max machining diameter: Ø658 mm • Max machining length: 1519 mm • Bar capacity (main spindle): Ø102 mm • Bar capacity (second spindle): Ø65 mm • Max support mass (main spindle): 650 kg • Max support mass (second spindle): 300 kg • Main spindle (HD1) • Chuck size: 12" • Spindle bore: Ø112 mm • Motor output: 22 / 18.5 kW • Torque: 883.3 / 716.2 Nm • Acceleration time: 4.9 s • Air blow system: Included • Additional configuration: Heavy‑duty HD1 spindle; removal of standard spindle cylinder and chuck • Second spindle (HD2) • Chuck size: 8" • Max speed: 5,000 rpm • Spindle bore: Ø76 mm • Motor output: 18.5 / 15 kW • Torque: 325 / 238 Nm • Acceleration time: 4.5 s • Factory option: HD2 spindle synchronization function • Milling spindle • Max speed: 12,000 rpm • Motor output: 24 kW • Cooling: Oil & air • Tool interface: HSK‑A63 (T63) • 90° indexing time: 0.5 s • Acceleration: 1.27 s • Lubrication: Oil & air • Tool capacity: • O.D. turning tools: □25 mm • I.D. turning tools: Ø40 mm • Milling tools: Max Ø125 × 400 mm • Axis travels • W: 1574 mm • Rapid traverse: X/Z 50 m/min; Y 40 m/min; W 30 m/min • Tool system and magazine • Tool system: CAPTO C6 • Tool magazine capacity: 72 positions • Automatic tool changer: Included • Functions: Tool breakage detection in magazine; Overload detection • CNC functions and software • 5‑axis machining function package • Tool radius compensation for 5‑axis • Cylindrical interpolation • Polar coordinate interpolation • Synchronous tapping with milling spindle • Cooling and preparation • Through‑tool coolant: 7 MPa • Preparation for oil mist extraction system • Highlights • Practically new condition with only ~68 operating hours • Very rich factory configuration • Full 5‑axis simultaneous machining • Main and sub‑spindle configuration • 72‑tool CAPTO magazine • Production‑ready with significant savings vs. new Additional equipment • Chip and parts handling • Side chip conveyor – Consep type • Belt‑type parts conveyor • Bar feeding and workpiece handling • LNS QLS II bar feeder • Bar feeder interface kit • Automatic parts catcher • Filtration • SEI FILTRATION unit • Series: JT040 • Model: 40/70‑V‑I‑R‑FM • Year: 2018 • Other accessories • Machine mounting anchors • 3‑color machine status signal lamp Technical Specification Counter Spindle Yes Driven Tools No

Condition: used, Year of construction: 2018, functionality: limited functionality, total length: 5,850 mm, total width: 1,730 mm, total height: 1,950 mm, For sale is a highly professional UV inkjet printer, the Durst Rho P10 200 Plus. This industrial hybrid machine combines the unsurpassed precision of 10-picoliter technology with the high productivity of a high-speed system. Ideal for print shops that need to switch flexibly between rigid sheet media and flexible roll materials. Lhedpfx Aoy Thc Hokueg Technical highlights: Versatile hybrid system: Processes rigid media (Forex, Dibond, acrylic, wood) up to 40 mm thick, as well as flexible roll media up to a width of 205 cm. Outstanding print quality: The Durst Quadro Array 10 technology delivers a native resolution of up to 1,200 dpi with 10-pl droplets – perfect for small text and fine gradients. Maximum productivity: Depending on the configuration/mode, production speeds of up to 350 m²/h. Color gamut: Standard CMYK [Here, if applicable, add special colors such as white, light cyan, light magenta]. Year of manufacture: [2018] Condition: Technically and visually in good condition. The machine only ran in a single-shift operation and was consistently maintained. Availability: Available [immediately] or by arrangement. Location: [83410 Laufen D] Scope of delivery: Durst Rho P10 200 Plus base machine, infeed and outfeed tables for sheet printing [Optional: mention roll option / RIP software license / accessories]. Price: On request (plus VAT, ex works, self-collection/dismantling by the buyer). On-site inspection and print samples are available after prior appointment. More pictures or information on request.

Year of construction: 1995, condition: excellent (used), Manual length adjustment via handwheel with digital display. Maximum feed length: 3,000 mm. Pneumatic parking brake. Ljdpfx Akjy Tyzzeushg

Condition: used, Year of construction: 2005, operating hours: 67,553 h, functionality: fully functional, clamping force: 500 kN, screw diameter: 30 mm, clearance between the columns: 355 mm, displacement volume: 106 cm³, injection weight: 96 g, mold height (min.): 210 mm, opening stroke: 400 mm, plate width: 480 mm, plate height: 480 mm, installation height: 400 mm, heating capacity: 8.3 kW (11.28 HP), power: 11 kW (14.96 HP), Machine DEMAG Ergotech Extra 50-200 with SEPRO Axess S3 handling robot. Ready for production and available for inspection at any time. 2 pneumatic cascades, 1 AS core pull, 6 integrated hot runner zones. Lhsdpfx Aex Ex R Eekuog

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, ground cable length: 3,000 mm, warranty duration: 3 months, type of cooling: air, welding current (min.): 5 A, welding current (max.): 200 A, For sale: Cjays Tig 200 DC Pulse 5-200 AMP 230 Volt Gas-cooled 2/4 Step Pulse Pre gas / Post gas Up slope / Down slope Start current / End current Elektrode option Steel + Stainless Steel weldable test welding possible Including 4 Meter SR17 welding torch, earht work lead, gas cable, and 3 months warranty. Test welding is possible. A video of the machine in welding condition is possible. We also deliver to countries like Spain, Germany, Austria, Lithuania, Greece and all other countries inside and outside Europe with Euro pallets per freight. All our machines have been serviced and are 100% ready to use unless otherwise indicated. The pictures above show the real machine. We can also offer you other types of machines such as: Used, New, Mig, Mag, Co2, Tig, Pulse, AC/DC, Plasma, Water-cooled, Electrode, Brands we offer: OTC, Migatronic, Lincoln, Miller, Fronius, Kemppi, Parweld, Tico, Lorch, Rehm, Selco, Carl Cloos, Cebora, Esab, Saf, EWM, Ess, Kemper. You always do business with Cjays Lastechniek itself and never with third parties. Ljdpfey Rqh Tjx Akujhg

Year of construction: 2003, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, mold installation height: 190-660mm, clear distance between the tie bars: 540x540mm, max. mold installation height: 378x378mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Ljdpey Snckjfx Akuehg

Year of construction: 1999, condition: ready for operation (used), Ejector stroke: 180mm, ejector force: 44kN, nozzle contact pressure: 38kN, hopper capacity: 75dm³, mold clamping force: 1962kN, mold opening stroke: 560mm, length: 6275mm, width: 1520mm, height: 1965mm, weight: 8.3t. An inspection on site is possible. Ljdpfx Akey Sncqjushg

Condition: used, functionality: fully functional, Year of construction: 2012, operating hours: 7,716 h, load capacity: 20,000 kg, lifting height: 3,200 mm, fuel type: gas, mast type: simplex, construction height: 3,160 mm, empty load weight: 22,100 kg, total length: 3,700 mm, drive type: Treibgas, construction width: 1,900 mm, Compact forklift truck – LPG Load center: 500 Mast type: Standard Condition: Ready for use and fully operational Technical condition: Very good Description: In addition to this RMF model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk locations. Visit our website - sago-online. Hire purchase & financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Ledpsx Dnzuofx Akujhg Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice on this MAXEIN DWB 200/500G. P.S.: Our master forklift workshop specializes in repair, refurbishment, overhaul, and custom builds for forklifts from 8 tons and up. We will also be glad to offer your vehicle for consignment sale at our facilities. Sideshift, Crane arm, telescopic and tiltable. Telescopic boom from 2410–3750 mm; the extension arm can be tilted from approx. 30° downward up to 45° upward. Heater, full cabin,