Used Doppstadt Ak 630 Multi for sale (8,630)

Condition: excellent (used), total length: 6,000 mm, total width: 2,400 mm, total height: 750 mm, color: blue, Operating conditions: Lhsdpfx Akjxrtb Neuog The industrial trailer is designed for use on level, paved surfaces in internal transport operations. Multiple trailer operation: The trailer components are not designed (without a coupling device) for combined operation with multiple trailers. Payload: The industrial trailer can carry loads up to a maximum of 25 t at 6 km/h with evenly distributed loading (surface load) between the axles. Point or line loads are only permissible upon notification. Base frame: The base frame of the industrial trailer consists of a robust welded construction made of profile steel. Loading platform: Dimensions are approx. 6000 x 2400 mm. Loading height approx. 750 mm. The platform is covered with softwood planks and bordered with all-round edge protection. Steering: Four-wheel axle pivot steering, drawbar can be raised, detached, and swapped from front to rear. Drawbar eye height at towing vehicle approx. 285 – 775 mm (other heights only possible upon notification), drawbar eye according to DIN 74054, diameter 40 mm, drawbar drop safety device according to UVV. Chassis: Both axles of the industrial trailer are steered. Solid elastic rubber tires approx. 559 x 356 mm, wheel hubs with tapered roller bearings and long-life grease lubrication. Paintwork: Finish in RAL 5002 ultramarine blue. Additional equipment: Two lashing rods made of round steel are welded vertically into the outer side frames on each longitudinal side of the industrial trailer. Rental or sale EU-wide.

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Ledpfx Aksxrtlusuehg Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. For rental or sale EU-wide.

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! Ljdpeh Rkhnjfx Akujhg 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN SOME PICTURES AND VIDEOS AVAILABLE

Condition: used, Year of construction: 2009, operating hours: 6,164 h, Doppstadt IDC000123 - manufacturer: Doppsttadt - model: DZ 750 Kombi - year of production: 2009 - gross vehicle weight: 46 000 kg Lhsdpsvy S Dpsfx Akusg - working hours: 6145

Condition: good (used), The counter-pressure technology of the MULTIMA product line is particularly suitable for filling beverages containing CO2, such as beer, soft drinks or mineral water. The integrated vacuum technology enables low-oxygen bottle and can filling. Rated output: up to 700 pieces/hour Manual filling Rotary lobe pump made of stainless steel Lsdpfehx D U Tex Akujhg

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Lodsun Sx Sepfx Akuohg Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: new, power: 250 kW (339.91 HP), Year of construction: 2025, The Multiple Cylinder Hydraulic Cone Crusher is an advanced type of cone crusher designed to provide higher productivity and better crushing performance than traditional single-cylinder cone crushers. Here are some key features and information about multiple cylinder hydraulic cone crushers: 1. Structure and Working Principle: - Multiple cylinder hydraulic cone crushers typically have three or more cylinders. - The crushing chamber is formed between the mantle (outer fixed cone) and the concave (inner moving cone). - The cylinders control the movement of the inner cone, providing a highly efficient and uniform crushing process. 2. Hydraulic System: - Each cylinder is equipped with its hydraulic system, allowing for independent control of the crushing chamber. - The hydraulic system is used for adjusting the discharge opening size, controlling the tramp iron release, and providing overload protection. Lodpsq Nd Rbofx Akuohg 3. Adjustable Discharge Opening: - The discharge opening can be easily adjusted to control the size of the crushed product. 4. Automation and Control System: - Multiple cylinder hydraulic cone crushers often feature advanced automation and control systems. - These systems can include programmable logic controllers (PLCs) and human-machine interfaces (HMIs) for convenient operation and monitoring. 5. Application: - Multiple cylinder hydraulic cone crushers are suitable for crushing hard and medium-hard materials in industries such as mining, metallurgy, building materials, and road construction. - They are particularly effective for crushing materials with high hardness and abrasive index. 6. Advantages: - Higher crushing efficiency and throughput compared to single-cylinder cone crushers. - Better shape of the crushed product due to the uniform crushing action. - Improved reliability and maintenance convenience. - Enhanced safety features with the hydraulic system providing overload protection. 7. Disadvantages: - Potentially higher initial cost compared to single-cylinder cone crushers. - May require more complex maintenance and repairs. 8. Models and Specifications: - Multiple cylinder hydraulic cone crushers come in various models, such as HPT series, HP series, and others, each with different specifications. 9. Manufacturers: - Various manufacturers produce multiple cylinder hydraulic cone crushers. Well-known manufacturers often provide reliable and high-quality equipment. When considering a multiple cylinder hydraulic cone crusher, it's essential to assess your specific needs, compare features of different models, and consider factors such as capacity, feed size, and required end product specifications. Additionally, check the reputation and customer feedback regarding the manufacturer and model you are interested in.

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 51 mm, turning length: 102 mm, drilling depth: 102 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum turning length: 102 mm Maximum drilling depth: 102 mm Maximum round bar diameter: 51 mm Maximum square bar diameter: 36 mm Maximum hexagon bar diameter: 44 mm Maximum octagon bar diameter: 47 mm Spindle drum diameter: 340 mm Standard bar feed: 125 mm Special bar feed: 290 mm Standard longitudinal slide travel, total: 125 mm Lhjdey R R Nwspfx Akujg Standard longitudinal slide travel, working stroke: 100 mm Special longitudinal slide travel, total: 160 mm Special longitudinal slide travel, working stroke: 125 mm Upper cross slide travel, total: 60 mm Upper cross slide travel, working stroke: 36 mm Middle cross slide travel, total: 60 mm Middle cross slide travel, working stroke: 36 mm Lower cross slide travel, total: 70 mm Lower cross slide travel, working stroke: 44 mm Maximum material pass-through: 51 mm Maximum material feed: 125 mm MACHINE DETAILS Coolant capacity: 660 l Pump capacity: 170 l/min EQUIPMENT Thread cutting device Right-hand threading via undercut Electric submersible pump Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, fixtures, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum material passage: 32 mm Maximum material feed: 125 mm Turning speed: 200–3,150 rpm Thread cutting speed (right-hand): 11.2–1,575 rpm Lhjdpfx Akey R R Igeujg MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & weight: Space required: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Current type: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulation oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Fixtures Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Lodpfey R Rutex Akuehg Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (min.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold complete with collets, holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Largest material passage: 32 mm Maximum bar feed: 125 mm Spindle speed (turning): 200–3,150 rpm Ljdpoy R Rqbofx Akuohg Spindle speed (right-hand threading): 11.2–1,575 rpm Thread cutting unit: Right-hand thread via undercut MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines available at the same location, see below! TECHNICAL DETAILS Max. turning length: 80 mm Max. drilling depth: 80 mm Maximum bar diameter round: 32 mm Maximum bar diameter square: 22 mm Maximum bar diameter hexagonal: 27 mm Maximum bar diameter octagonal: 29 mm Spindle circle diameter: 300 mm Standard bar feed: 125 mm Special bar feed: 290 mm Normal longitudinal slide total travel: 100 mm Normal longitudinal slide working travel: 80 mm Special longitudinal slide total travel: 145 mm Special longitudinal slide working travel: 115 mm Cross slide upper slide total travel: 50 mm Cross slide upper slide working travel: 33 mm Cross slide middle slide total travel: 50 mm Cross slide middle slide working travel: 30 mm Cross slide lower slide total travel: 60 mm Cross slide lower slide working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: E-submersible pump Pump capacity: 180 l/min EQUIPMENT Rapid drilling device Gripper device Reaming device Independent auxiliary longitudinal control Ledsy R Rnyepfx Akushg Motorized cross slide adjustment Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! Ljdpfsy R Rm Aox Akuohg This machine is sold complete with collets, tool holders, and additional accessories. For more Schütte multi-spindle lathes available from the same site, please see below! TECHNICAL DETAILS Maximum turning length: 80 mm Maximum drilling depth: 80 mm Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard bar feed up to: 125 mm Special bar feed up to: 290 mm Standard longitudinal slide travel, total: 100 mm Standard longitudinal slide travel, working travel: 80 mm Special longitudinal slide travel, total: 145 mm Special longitudinal slide travel, working travel: 115 mm Upper cross slide travel, total: 50 mm Upper cross slide travel, working travel: 33 mm Middle cross slide travel, total: 50 mm Middle cross slide travel, working travel: 30 mm Lower cross slide travel, total: 60 mm Lower cross slide travel, working travel: 37.5 mm Maximum material passage: 32 mm Maximum material feed: 125 mm MACHINE DETAILS Voltage: 400 V Frequency: 50 Hz Coolant capacity: 700 l Pump: Submersible electric pump Pump output: 180 l/min EQUIPMENT High-speed drilling unit Gripper unit Reaming unit Independent auxiliary longitudinal control Powered cross slide adjustment Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, turning length: 80 mm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, see below! TECHNICAL DETAILS Maximum material passage: 32 mm Maximum material feed: 125 mm Maximum turning length: 80 mm Maximum drilling depth: 80 mm Turning speed: 200–3,150 rpm Thread cutting speed (right-hand): 11.2–1,575 rpm Thread cutting device: Right-hand thread by underspinning MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & weight Footprint: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Current type: 50 Hz Main drive: 20.5 kW Lhsdjy R Rkuepfx Akusg Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Holders Additional accessories

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, bar diameter (max.): 32 mm, turning length: 80 mm, rotational speed (max.): 3,150 rpm, drilling depth: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines from the same location, see below! TECHNICAL DETAILS Maximum bar capacity: 32 mm Maximum bar feed: 125 mm Maximum turning length: 80 mm Lhsdsy R Rcwjpfx Akueg Maximum drilling depth: 80 mm Spindle speed for turning: 200–3,150 rpm Spindle speed for right-hand thread cutting: 11.2–1,575 rpm MACHINE DETAILS Coolant capacity: 600 l Pump output: 170 l/min Dimensions & Weight Required space: 7.3 x 2.5 m Height: 2 m Weight: 8,300 kg Voltage: 380 V Frequency: 50 Hz Main drive: 20.5 kW Immersion pump: 1.5 kW Feed drive: 1.5 kW Hydraulic pump: 1.5 kW Circulating oil pump: 0.25 kW EQUIPMENT 6 cross slides 6 longitudinal slides 6 cams for cross slides 6 cams for longitudinal slides Operating tools Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold with collets, tool holders, and additional accessories! For more Schütte multi-spindle machines being sold from the same location, please see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle circle diameter: 300 mm Bar feed normal/special up to: 125 / 290 mm Longitudinal slide travel, standard, total/work stroke: 100 / 80 mm Longitudinal slide travel, special, total/work stroke: 145 / 115 mm Cross slide travel, upper slide, total/work stroke: 50 / 33 mm Cross slide travel, middle slide, total/work stroke: 50 / 30 mm Cross slide travel, lower slide, total/work stroke: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per operation, standard: 60–425 Workpiece revolutions per operation, shortened: 33.5–236 Workpiece revolutions per operation, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor rated power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space requirement for packed machine: 15 m³ Lodpfsy R N Uljx Akushg EQUIPMENT Collets Tool holders Additional accessories

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, spindle speed (max.): 3,150 rpm, bar diameter (max.): 32 mm, overall weight: 8,300 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For more Schütte multi-spindle machines available from the same location, see below! TECHNICAL DETAILS Maximum bar diameter, round: 32 mm Maximum bar diameter, square: 22 mm Maximum bar diameter, hexagonal: 27 mm Maximum bar diameter, octagonal: 29 mm Spindle pitch circle diameter: 300 mm Standard/special bar feed: up to 125 / 290 mm Standard longitudinal slide travel, total/traverse: 100 / 80 mm Special longitudinal slide travel, total/traverse: 145 / 115 mm Cross slide travel – upper slide, total/traverse: 50 / 33 mm Cross slide travel – middle slide, total/traverse: 50 / 30 mm Cross slide travel – lower slide, total/traverse: 60 / 37.5 mm Number of spindle speeds: 49 Spindle speed range I: 450–3,150 rpm Spindle speed range II: 200–1,400 rpm Workpiece revolutions per cycle, standard: 60–425 Lsdpfxoy R N I Ee Akujhg Workpiece revolutions per cycle, reduced: 33.5–236 Workpiece revolutions per cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Drive motor: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,850 x 1,510 mm Length with bar feeder: 6,453 mm Machine weight: 8,300 kg Space required for packed machine: 15 m³ EQUIPMENT Collets Toolholders Additional accessories

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, spindle speed (max.): 3,750 rpm, bar diameter (max.): 26 mm, overall weight: 6,800 kg, No reserve price – guaranteed sale to the highest bidder! The machine is sold complete with collets, toolholders, and additional accessories! For further Schütte multi-spindle machines for sale from the same location, see below! TECHNICAL DETAILS Bar diameter round: 26 mm Bar diameter square: 19 mm Bar diameter hexagonal: 22 mm Bar diameter octagonal: 24 mm Spindle circle diameter: 270 mm Standard bar feed: 125 mm Special bar feed: 290 mm Longitudinal slide travel, standard total: 80 mm Longitudinal slide travel, standard working length: 63 mm Longitudinal slide travel, special total: 125 mm Longitudinal slide travel, special working length: 98 mm Cross slide travel, upper slide total: 40 mm Cross slide travel, upper slide working length: 25 mm Cross slide travel, middle slide total: 40 mm Cross slide travel, middle slide working length: 25 mm Cross slide travel, lower slide total: 50 mm Cross slide travel, lower slide working length: 31 mm Number of spindle speeds: 49 Lodpfxey R Nx Do Akuohg Spindle speed range I: 530–3,750 rpm Spindle speed range II: 236–1,700 rpm Workpiece revolutions per working cycle, standard: 60–425 Workpiece revolutions per working cycle, short: 33.5–236 Workpiece revolutions per working cycle, extended: 95–670 Number of main times per spindle speed: 35 MACHINE DETAILS Rated drive motor power: 18.5 kW Drive motor speed: 1,500 rpm Dimensions & Weight Dimensions with control cabinet (L x W): 3,500 x 1,450 mm Length with bar guide: 6,470 mm Machine weight: 6,800 kg Space requirement for packed machine: 14 m³

Condition: not inspected (used), functionality: unexamined, pressing force: 50 t, stroke length: 40 mm, overall weight: 3,000 kg, rotational speed (max.): 500 rpm, rotational speed (min.): 100 rpm, No minimum price – guaranteed sale to the highest bidder! By placing a bid, you commit to timely collection between 23.06.2026 and 26.06.2026! TECHNICAL DETAILS Pressing force: 50 t Ram stroke: 16 - 40 mm Flywheel speed range: 100 - 500 rpm Decoiler diameter: 1,000 mm MACHINE DETAILS Lhsdpfey D Thpex Akujg Dimensions & Weight Dimensions (L x W x H): 4,500 x 2,000 x 2,200 mm Machine weight: 3,000 kg External reference: 43

Condition: ready for operation (used), Year of construction: 1981, machine/vehicle number: 302118, functionality: fully functional, pressing force: 100 t, wire diameter (max.): 14 mm, section length (max.): 125 mm, production capacity: 7,200 unit/h, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates timely collection between 23/06/2026 and 26/06/2026! TECHNICAL DETAILS Lsdpey D Nldefx Akujhg Max. total pressing force: 1,000 kN Productivity/capacity: 120 pcs/min Wire diameter: max. 14 mm Cut length: 125 mm Number of stages: 4 Number of dies: 4 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 3,000 x 2,200 mm Machine weight: 12,000 kg External reference: 35

Condition: used, Year of construction: 2011, INDEX MS22-6 Mfd. 2011 IEMCA SIR Loader Knoll System Equipped as pictured Ljdpfjy Ihk Hox Akujhg

Condition: used, Year of construction: 2017, Mfd. 2017 Configuration: 2-Synchron (Dual Counter-Spindle) Production Hours: 20,000 Overview Well-equipped and maintained INDEX Werke MS22-6 configured for high-precision production, including medical components. This machine features a robust Siemens control platform, dual counter-spindles, and extensive automation for efficient, lights-out capable operation. Control & Technology • Siemens 840D SL CNC control • Dual NCU (Numerical Control Units) • TRANSMIT / TRACYL functions • ARTIS tool monitoring system • 2 additional electronic shaft preparations Configuration & Equipment • 6 main spindles • 2 SCARA counter-spindles • 2 parts catchers with conveyor belt • Bar scrap recuperator • INDEX bar guide system • IEMCA PRA bar loader • Bar feeder interface • Fire protection system Lodpjy Abc Ejfx Akujhg Capacity & Performance • Max. bar diameter: 22 mm • Spindle speed: 10,000 rpm • Spindle power: 8.7 / 15 kW • Torque: 10 / 18 Nm Axes & Travels • Total slides: 10 • Main slides travel (X/Z): 62 / 85 mm • Counter-operation slides: 2 • Counter slide travel (X): 62 mm Additional Specifications • Number of counter-spindles: 2 • Counter-spindle speed: 10,000 rpm • Machine dimensions (L x W x H): 3330 x 1830 x 2860 mm • Weight: 5,700 kg • Connected load: 75 kVA Applications • High-precision medical components • Complex turned parts requiring multi-operation efficiency • Ideal for high-volume production environments

Condition: used, Year of construction: 1980, Wickman 1" SN: 17069 Mfd. 1980 6 Spindles 1" Capacity Motor and Controls Stock Stand and Reel Chip Conveyor Universal Threading Ljdpfx Ajyzkfyekuehg Configured as pictured Recently Reconditioned

Condition: excellent (used), Year of construction: 2024, Mfd. 2024 Chip Blaster High Pressure pump 8 Port Programmable High Pressure Manifold 1000 PSI 12 Port Coolant Manifold with Shut Off Valves Parts Catcher Sub Spindle & Back Working Attachment Spindle Drive Motor: 5.00 Nm (Nominal Torque) Max. Speed: 5000 RPM Feed Motors (X & Z): 2.1 Nm3000 RPM (X Has Break) Travel Z: 7.874″ Stroke Rapid Feed Rate: (Z) : 1000 IPM Travel X: 4.375″ Stroke Rapid Feed Rate (X): 200 IPM Cross Slides Motors: 2.1 Nm, 3000 RPM ( 4th X Motor Has Break) 1st Travel: 2.625″ Stroke 2nd Travel: 2.000″ Stroke 3rd Travel: 7.400″ Stroke Ledsyzkbhjpfx Akuohg 4th Travel X: 1.750″ Stroke 4th Travel Z: 4.062″ Stroke Rapid Speed: 200 IPM Specs to be verified by purchaser

Condition: good (used), Year of construction: 1980, Davenport Model B 3/4" Mfd. in 1980s Pickoff / Back Finish Threading Stock Reel and Stand Chip Conveyor Noise Tamer Sound Enclosure Lhjdpjh I Euajfx Akuog Refurbished and Ready to Run Several similar machines available