Used Pet Bottle Filling Line for sale (12,709)

Condition: used, Used bottling line Cortellazzi for CSD in PET bottles – 8000 bph General overview of the line The used Cortellazzi bottling line for carbonated soft drinks in PET bottles 8000 bph delivers an integrated solution for producing soft drinks and sparkling water in 0.50 L and 1.5 L containers. Specifically designed for industrial environments, the system provides a complete technical configuration. It maximizes production efficiency and ensures operational safety by including protection devices and quality control systems at every stage. Moreover, the layout supports continuous operation with minimal downtime. Filling unit and blow molders The Cortellazzi Fintec VEGA 40.70.10 isobaric filling monoblock 1998 handles carbonated products while maintaining constant pressure during the filling process. As a result, the system preserves CO2 content and prevents product loss. Two separate blow molding machines feed the containers. A Sidel SBO8 from 1999 ensures continuous high efficiency production, while a Kosme KSB-4000 from 1998 serves as a backup or support unit. In addition, both machines allow quick format changes and stable operation under load. Carbonator and CO2 management The Cortellazzi Kristal Mix 1998 controls carbonation and saturates the product with CO2. Consequently, the unit ensures consistency and stability throughout the filling phase. Notably, it also supports fine tuning of pressure and temperature parameters. Labeling and customization Three labeling systems carry out specific functions. The Kosme Ekstrahotmelt 12TS1E1 1998 applies labels using hot melt glue. Meanwhile, the KHS Carmichael 1995 handles traditional label application. Furthermore, the Esleeve ESM 3200M 2004 applies shrink sleeves to PET containers in various formats. Together, these machines offer flexible labeling solutions for different product lines. Quality control and heat tunnel The Krones Miho module 2008 inspects containers and labels, detecting any defects or irregularities. If necessary, the system can reject non compliant items without interrupting the production flow. Then, the Krones Shrinkmatt 3000 tunnel 2008 uses steam to shrink the sleeves uniformly onto the containers. In particular, this tunnel guarantees even heat distribution, preventing sleeve distortion. Ledpfxswukuzo Akuohg Secondary packaging The Dimac Bluestar F30 2007 wraps products into shrink film with speed and precision. As such, this unit optimizes grouping and prepares the packs for palletizing. Additionally, it minimizes material waste and ensures a clean wrap. Handle and cap application The Twin Pack MGE 1997 applies handles to the grouped bottles. Simultaneously, the Bortolin Kemo 1997 feeds caps consistently and ensures uninterrupted sealing of containers. This way, the two systems maintain rhythm and alignment on the line. End of line and automation The Keber Meg Arm palletizer 1998 arranges the finished packs onto pallets.

Condition: used, Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L  and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can filler with seamer ensures precise and rapid filling of cans. Featuring advanced technology and integrated sealing, it guarantees hermetic and secure closure for product preservation and quality. Furthermore, the filler’s seamless integration with the seamer streamlines the production process, minimizing downtime and maximizing efficiency. Lodpfswbfh Nox Akushg Conveyor & Automation Stainless Steel Full Can Conveyors The conveyor and automation system of the Used filling line CFT for cans up to 10800 cph includes stainless steel conveyors, facilitating without a doubt efficient transport of cans along the production line. Robust and reliable, it ensures continuous and uninterrupted flow. Additionally, the conveyor’s modular design allows for easy customization and expansion to meet evolving production demands. Carleton Helical Technologies Can Invert / Re-vert System The Carleton Helical Technologies can invert/revert system ensures a seamless and uninterrupted flow along the production line, thereby optimizing efficiency. Furthermore, the system’s innovative design minimizes the risk of jams or blockages, enhancing overall operational reliability. Videojet Ink Jet Coder The Videojet ink jet coder ensures clear and precise marking on each can, enhancing traceability and quality control measures. Moreover, the coder’s high-speed capabilities enable swift marking without compromising accuracy, contributing to streamlined production processes. In-Line Pressure Sensitive Wrap Around Labeler The in-line pressure-sensitive wrap-around labeler of this CFT Canning Line, specifically the Paradigm 700 model, ensures swift and accurate label application, enhancing product presentation and brand visibility. Additionally, the labeler’s adaptable design accommodates various label sizes and shapes, providing versatility for diverse packaging requirements. Stainless Steel Flow-through Conveyor Table The stainless steel flow-through conveyor table with a plastic mattop belt of the CFT Canning Line guarantees continuous and uninterrupted flow along the production line, facilitating smooth operation.

Condition: used, Used Plant SPADONI for Beer Processing over 700 hl per year Lhedpfx Akov Ew Svsueg Machinery for Beer Production in this SPADONI Beer Processing Plant The SPADONI beer processing plant, with a capacity of over 700 hl per year, incorporates highly specialized machinery that enhances efficiency and precision in every stage of the production process. Since 2012, this plant has integrated advanced solutions for milling, brewing, cooling, and fermentation, allowing operators to maintain maximum control of production parameters. Milling and Steam Generation The Spadoni malt mill, manufactured in 2012, processes malt at a rate of 200 kg/hour. It crushes malt with adjustable granulation, thereby optimizing the extraction of fermentable sugars. Additionally, the Thermindus LPG steam generator, installed in the same year, delivers the necessary heat for brewing and pasteurization operations. As a result, it ensures stable and reliable thermal control. Brewhouse and Thermal Management The core of the plant features the Spadoni MBS 500 brewhouse, which operates with the capability to perform a double batch per day. Since 2012, this system has facilitated a continuous and high-performance wort production process. Furthermore, the 1,000 L hot water tank, produced by Spadoni Srl, supplies adequate thermal energy to support the brewing cycle. For efficient wort cooling, the plant contains a Spadoni plate heat exchanger and wort aerator, which has been in operation since 2012. This component rapidly reduces the temperature while ensuring proper oxygenation before fermentation. Moreover, the 10 hl hot and cold water storage tanks, constructed by Spadoni Srl, optimize thermal management during production, thus guaranteeing operational stability. The 1,400 L cold water tank by Alfalaval further enhances the thermal management system by supplying refrigerated water essential for rapid wort cooling. Consequently, the plant maintains consistent processing conditions. Fermentation Cellar The fermentation cellar accommodates approximately 700 hl of annual production capacity. It includes tanks that effectively regulate and maintain the necessary temperature levels. The 2012 Spadoni fermenters, each featuring a usable volume of 11 hl, were manufactured by Spadoni Srl and correspond to the SDF1000B model. Their insulated construction, which provides a total capacity of 1,295 liters, ensures superior thermal stability during fermentation. Additionally, the cellar houses two 13 hl fermenters, produced in 2014 and 2016 by Ricci Engineering, along with an extra 6 hl fermenter from 2012. As a result, operators can manage production volumes with precision. Temperature Control To regulate fermentation temperature, the plant includes a 2012 fermenter temperature control panel, which allows for accurate monitoring and adjustment of fermentation parameters. In addition, the 2012 MTA glycol fermenter cooling unit maintains optimal temperature throughout the fermentation cycle, preventing any thermal fluctuations that could affect final product quality.

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. Ledpfswr T E Dsx Akuehg High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Used Complete Bottling Line for wine immediately available for sale: This used bottling line is made up of used equipment that can work mainly with still wine. The used Used Complete Bottling line has an isobaric monoblock that allows you to work both slightly sparkling and sparkling wines. Currently, it is used for wines without gas but also for some production with sparkling wine. The cap in this case is a classic aluminium screw. The used Complete Bottling Line wine-filling is completely automatic from the depalletizer to the palletizer. The packing of the used line is made with three separate machines that form, box and close the American carton. The operators currently used on the used Complete Bottling Line are 3 plus a quarter for the forklift during loading and unloading. Some used equipment is also delivered to the used bottling line for wine. These are for the standard 0.75 CL Bordeaux. To sanitize the used line, they use disposable steam which still allows the taps \ central part to be washed well. Used wine filling line services: For this Complete Bottling Line used for the wine we can offer disassembly and packaging services, and reassembly in case of need. Furthermore, we can propose a new project for adding bottle format equipment in case of a new bottle shape. A maintenance service can be negotiated for this Complete Bottling Line and implemented in about 75 working days from the confirmation of the order. All replaced parts are warranted except Filters, fuses, lubricants and consumables in general; they are subject to ordinary or scheduled maintenance. The electrical components can be damaged by accidental electric shocks to the control panel and by the interruption of the general control. Damage due to the use of non-original parts. Used Complete Bottling Line for wine subject to prior sale. Lhjdevguphspfx Akusg  

Condition: used, operating hours: 3,000 h, Used complete isobaric bottling line for CSD 6400 bph Technical Overview of the Line This Used complete isobaric bottling line for CSD 6400 bph produces carbonated soft drinks with a nominal output of 6400 bottles per hour. Specifically, the line handles 0.50-liter PET containers using an isobaric filling system. In particular, this technology maintains constant internal pressure during the filling process. As a result, it prevents carbon dioxide loss and ensures that the final product preserves its quality and carbonation from tank to cap. Container Compatibility and Specifications The line supports PET bottles with 18-10 and 18-81 PCO necks, which represent standard formats across the beverage industry. Consequently, operators can integrate the system into existing lines without modifying downstream capping equipment. In addition, this compatibility facilitates bottle sourcing and packaging flexibility. Furthermore, the system ensures that transitions between production batches remain smooth and efficient. Working Hours and Line Condition The machines in this Used complete isobaric bottling line for CSD 6400 bph have completed only 3000 hours of operation. In comparison to similar used systems, this relatively low usage indicates limited wear on mechanical parts. Therefore, technicians can expect excellent performance with minimal maintenance needs. Moreover, this condition makes the line suitable for facilities that require immediate deployment with limited downtime. Line Composition The process begins with a Sidel SBO4 COMPACT blow molding machine, built in 2006, which forms PET bottles directly from preforms. Then, the Simonazzi-Sidel Starblend mixer, manufactured in 2007 blends water, syrup, and carbon dioxide under pressure. Afterward, the product is managed in the Simonazzi-Sidel Bluestar filling monoblock, also from 2007. This unit includes 32 grippers, 32 isobaric filling valves, and 8 capping heads. Thanks to this configuration, the line fills and caps each bottle quickly while maintaining product integrity. Additionally, the machine layout allows for optimal integration of automation and operator access. Notably, each module connects via pre-aligned interfaces, which streamline installation and minimize commissioning time. Altogether, these features contribute to high production efficiency and ease of maintenance. Quality Control and End of  this Used complete isobaric bottling line Lhsdpfxewahdqj Akueg To guarantee packaging integrity, the line includes a Heuft inspection unit that checks bottle necks and caps for defects. Following inspection, the bottles pass through a Sidel RollQUATTRO F15 labeling machine (2007), which applies wrap-around labels at high speed with precision. Subsequently, a Cermex CP 18 AAE shrink wrapper (2006) packages bottles into multipacks using shrink film. Throughout the process, Sidel conveyors transfer bottles between stations without creating friction points or mechanical delays.

Condition: used, Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph The Used Bottling Line KRONES for still, sparkling water and CSD 12000 bph ensures good-performance bottling for mineral water, sparkling water, and carbonated soft drinks (CSD). Specifically, it processes PET containers in 1.5 l format, using isobaric filling technology to preserve the quality of both carbonated and non-carbonated beverages. Moreover, the bottle neck standard is PCO 1810. In addition, this Used Bottling Line KRONES for still, sparkling water and CSD – 12000 bph integrates synchronized machines, thereby optimizing every production step, from preform feeding to final packaging and palletizing. Preform Feeding and Preparation in this Used Bottling Line KRONES The process begins with the preform feeder, which continuously supplies preforms to the preform inverter. As a result, the line maintains a smooth and consistent flow, with correct alignment of preforms before the blowing process. Blow Molding Machine Next, the blow molding machine—a Krones Contiform Compact 10, year 2001—uses a Siemens S5 control system to manage heating and blowing phases. Consequently, it transforms preforms into precisely shaped PET bottles ready for downstream processes. Air Conveyors of the Used Bottling Line KRONES for still and sparkling water Once the bottles are formed, they are transferred via Krones AirCo air conveyors, model AirCo, year 2011. These conveyors extend for approximately 110 meters. Furthermore, they are controlled by inverters and a Siemens S5 controller, ensuring the transport to the next station. Mixing and Carbonation Unit Before filling, the product passes through the mixing and carbonation unit, a Krones MS, year 1992. This system mixes water and syrup, and then carbonates the product with CO₂ for sparkling drinks, or injects nitrogen for still water. Notably, the unit ensures continuous operation and mixing, thus maintaining product consistency throughout production. Filling Monoblock Following the mixer, the filling monoblock—Krones VK PET 100 SV K, year 1993—comes into action. Controlled by a Schleicher system, it includes: Bottle rinsing unit Isobaric filling machine, suitable for both still and carbonated beverages Capping unit for PCO 1810 PET bottles Ledowa Tqcepfx Akuehg CIP (Cleaning-In-Place) connections Capacity to handle 1.5 l format Importantly, this unit represents the heart of the line, performing several critical functions within a compact and coordinated block. Labeling Machine Immediately after filling, a Krones labeling machine, model Canmatic, year 1997, applies labels to PET bottles with precision. As such, it ensures accurate positioning and high throughput, contributing to a professional final presentation. Shrink Wrapper Subsequently, the shrink wrapper—Dimac Green Star Big, year 2011—forms multipacks using shrink film.

Condition: used, operating hours: 40,000 h, Krones Contifeed Preform Feeder The Krones Contifeed preform feeder is designed for the precise and efficient feeding of PET preforms into the blow molding machine. It operates using a roller sorter system that gently handles preforms of various sizes, ensuring they are properly aligned before entering the blow molder. The Contifeed system offers quick and infinitely variable adjustments, allowing it to accommodate different preform types and sizes with minimal manual intervention. The system is available in three different lengths to match the output of the blow molding machine and includes options for automatic adjustment, making it highly flexible and adaptable to different production requirements. The design also includes features like automatic troubleshooting and easy access for maintenance, ensuring high operational efficiency​. Krones Preform Check Inspector The Krones Preform Check Inspector is a sophisticated, inline inspection system designed to ensure the quality and integrity of PET preforms before they enter the blow molding process. Recognizing that the quality of the final bottle is heavily dependent on the condition of the preform, this system plays a critical role in maintaining high production standards and reducing waste in bottling operations. The Preform Check Inspector utilizes advanced vision technology, incorporating high-resolution cameras and specialized lighting to conduct a comprehensive analysis of each preform. As preforms pass through the inspection station, they are subjected to multiple checks that assess various quality parameters. These include detecting surface defects such as scratches, dents, or contaminants, as well as identifying dimensional inaccuracies like ovality or variations in wall thickness. Lhodpfxovgvl Ro Akujg One of the key features of the Preform Check Inspector is its ability to perform 360-degree inspections. This is achieved by rotating each preform in front of stationary cameras, allowing for a complete examination of the entire surface area. This comprehensive approach ensures that even minute defects, which could compromise the integrity of the final bottle, are reliably detected. The system is also equipped with specialized software algorithms that analyze the captured images in real-time. These algorithms are calibrated to distinguish between acceptable variations and actual defects, minimizing false rejects and ensuring that only preforms that truly fail to meet quality standards are removed from the production line. This precision contributes to optimal material utilization and cost efficiency. Integration with the overall production line is seamless, as the Preform Check Inspector can communicate with upstream and downstream equipment to synchronize operations. In the event of detecting a defective preform, the system can trigger reject mechanisms to remove the faulty item without interrupting the flow of production. Additionally, the system’s data logging capabilities allow for tracking defect rates and identifying patterns, which can be invaluable for quality control and process improvement initiatives.

Condition: used, Used Isobaric Filling Line for Sparkling Wine 3000 bph The isobaric filling line for sparkling and semi-sparkling wine produces 3000 bottles per hour and handles 1.5-liter bottles along with a wide range of formats. The line operates smoothly, and you can inspect it before its decommissioning at the end of April. Every machine in the line includes safety features, and some technical manuals remain available. The bottle formats include Collio, Atmosfera, Astro, Lia, Cuvee, Spumante Italia, Flute, Campana, Extral, Tappo Raso, Emiliana, Bordolese, Borgognotta, Bordolese Nobile, and Borgognotta Alta. Moreover, the seller will supply format change parts along with the line. Additionally, conveyors ensure seamless and continuous movement between machines, optimizing the production process. Description of Main Machines Depalletizer TMG VEGA 60 (2008) Lhedpfx Asvxz Alekujg In this Used filling line for sparkling wine the depalletizer automatically removes bottles from pallets using its integrated PLC and electronic protection barriers. Furthermore, its system includes a layer pad magazine and an automatic mechanism for removing pads and caps within the same cycle, ensuring efficiency. Rinsing Machine AVE RAI 12 (1999) The rinsing machine cleans the inside of bottles using its PLC system. It effectively removes particles and potential contaminants. As a result, the bottles are properly prepared for filling, which contributes to higher product quality. Ozone Dispenser The ozone dispenser sanitizes bottles before filling by producing ozone gas, a strong oxidizing agent. Not only does the gas eliminate bacteria, yeast, and microorganisms, but it also leaves no chemical residues, thereby guaranteeing high hygiene standards. Isobaric Filling Machine Cobert SUPREMA (1985) The isobaric filling machine fills bottles using 24 filling valves while controlling internal pressure. Consequently, it processes both still and sparkling wines, preserving their stability and quality. Capping Machine AROL (1997) The single-head capping machine applies flush and mushroom corks. As a result, it ensures airtight sealing, which preserves the wine’s flavors and properties over time. Capping Machine KOMPASS (2007) The capping machine applies screw caps (BVS, Stelvin) to bottles with precision. Furthermore, its design accommodates multiple formats and guarantees secure closures for different types of wines. Wirehooder ROBINO & GALANDRINO REKORD 10/2 (1994) The wirehooder automatically applies wire cages using its 10 plates and long-duration magazine. Because the machine loads cages from ground level, it allows uninterrupted operations without delays. Bottle Heating Tunnel COMTEC (2017) The heating tunnel stabilizes the temperature of bottles after filling by spraying them with warm water. Consequently, it helps reduce thermal shock and prevents potential damage to the bottles.

Condition: used, Used Filling Line Sidel For Water 2014 Air Compressor ABC 3HA-4-TFK-LT 200kw Air compressor Low Fusheng SA75 75KW Ice water Machine Nanjing Wuzhou LSBLG 1290DT 1256.8KW 298.8KW Ice water machine Shanghai Baoqing WA-78W/PT4EN-I 49kw Blow Molding Machine SIDEL/SBO20 Blower Capacity：36000P/H Power：406KW Spindle heads 262 pcs Manipulator 10pcs/each Blow moulding satation 20 pcs SIDEL Filling Machine Lodpfx Akevlgqhouehg Capacity： 36000P/H Power： 35KW Filling Valves 60pcs Capping heads 15 pcs SIDEL 36000 bph Labelling Machine Capacity： 600B/min Power： 50KW Vacuum drum 1 set Scaleplate 2 pcs Capping heads 20 pcs SMI Shrink Wrapper Capacity： 35 P/Min Power： 75KW Divider： 4 sets Infeed： 4 sets Former 5 sets TW Benifit Palletizer with Conveyor and Divider Capacity： 35 P/M Power： 25KW Used Filling Line Sidel For Water 2014, this complete line for water is in excellent conditions and ready immediately for sale

Condition: used, Krones 48,000-bottle-per-hour (BPH) complete bottling line for non-carbonated products is designed for PET containers with sizes of 0.38 L and 0.55 L, using volumetric filling and 30/25 type necks. The line includes several key components, including a 2015 Krones Contiform blow molding machine with 22 cavities, a 2015 Krones Contifeed preform conveyor, and a 2015 Krones Contiform 50-20 filling monoblock. The system also includes 2021 Hawkeye Smart C-3000 and 2020 Krones Linadry air dryers, 2021 Krones labeling machines, and several other machines for inspection, packaging, shrink wrapping, and palletizing. This used bottling line is ready to use and monitors the operational status of each machine monthly to ensure maximum efficiency and reliability. Krones Contiform 2015 blow molding machine with 22 cavities of Used Complete Bottling Line Krones for Still products 48000 bph The Krones Contiform 2015 blow molding machine with 22 cavities of this krones line is designed for high-speed production of PET containers, with an output capacity of up to 48,000 bottles per hour. The Contiform uses an optimized linear infrared heating module for preforms up to 160 mm in length and 48.5 mm in support ledge diameter. This model features advanced blow molding technology, enabling production of up to 2,750 containers per cavity per hour, while reducing compressed air consumption by 15% compared to previous models. The intelligent control system of the Contiform ensures consistent bottle quality through various optional modules, such as the Prejet preform internal cleaning system and the PET-View inspection system for integrated quality control of preforms and containers. The machine includes a blowing module with an advanced mold clamping mechanism, eliminating the need for a pressure pad and allowing the production of bottles up to 2.0 liters in volume on a reduced-size blowing module, occupying 22% less space than previous models. The active transfer system with five-point heating mandrels in the linear oven and reduced number of internal horizontal transfer points for preforms and containers improve operational efficiency. The high-precision Monotec servo motors with real-time synchronization ensure precise and reliable handling of preforms throughout the blow molding process. Krones Contifeed 2015 preform conveyor The Krones Contifeed 2015 preform conveyor is designed to ensure continuous and consistent feeding of preforms to the blow molding machine. The Contifeed system supports various types of preforms, including lightweight, standard, and heavy, and is available in three models suited to the respective blow molder capacity. The feed rail variants include a gravity system for common preforms and an air-assisted system, ideal for lightweight preforms and high-speed applications. Lhsdjvlwpuepfx Akueg The Contifeed features automatic adjustment for quick format changes, hygienic design, and a soft-tilting preform tipper for gentle preform feeding.

Condition: used, Used Filling Line for Sparkling Wine PROCOMAC Up to 6000 BPH Condition and Capacity Firstly, the filling line reaches up to 6000 bottles per hour (BPH), standing as an efficient solution for companies aiming to optimize their bottling processes. Currently stored, moreover, this line offers versatility in handling different glass container formats, specifically 0.375 L, 0.75 L, and 1.5 L, for both sparkling and still wines. Additionally, the isobaric filling technology ensures product integrity throughout the process. Key Components of the Used filling line for sparkling wine PROCOMAC up to 9000 bph The system comprises several key machines. Initially, the TMG depalletizer, model VEGA 60 from 2004, handles empty bottles. Following this, the Procomac filling monoblock, model 56 8 8 141 from 2004, integrates filling stages into a compact solution. Furthermore, the Bertolaso capping machine, model EMN 550/350 from 1995, ensures each bottle is sealed correctly. Cleaning and Maintenance Essential for maintaining quality and hygiene, moreover, the Procomac CIP (Cleaning-In-Place) system, model 92.003.657 from 2004, allows for effective and automated cleaning of the equipment without disassembly. This aspect is crucial to ensure the longevity and efficiency of the filling line. Ledpfxsvgt I Ao Akujhg Automation and Labeling Moreover, automation plays a key role in the line’s efficiency. Conveyors move bottles from the depalletizer to the exit of the triblock, highlighting the importance of uninterrupted workflow. Subsequently, the Kosme labeling machine, model EXTRA ADHESIVE 720 12T S3 E3 CE from 2006, applies labels accurately, ensuring a consistent and professional brand image on the final product. Packaging Final packaging is managed by TMG machinery: the ORION case erector from 2008 prepares cardboard cases, while the TM90S case sealer from 2004 closes and seals the cases, ready for distribution. These final steps are vital to ensure that the finished product is presented and protected adequately for transport. Performance of the Used filling line for sparkling wine PROCOMAC up to 9000 bph Lastly, the line displays versatility in performance, with a nominal speed of 6,000 BPH for sparkling wine in the 0.75 L format and 9,000 BPH for still wine in the same format. This flexibility demonstrates the adaptability of the used PROCOMAC sparkling wine filling line to different production needs, making it a valuable solution for any winery.

Condition: used, Used Bottling Line HDPE for dairy products 7200 bph Used Bottling Line HDPE for dairy products 7200 bph: Structure and Production Capacity The Used Bottling Line HDPE for dairy products 7200 bph processes and bottles dairy products in high-density polyethylene (HDPE) containers. The line operates at a nominal capacity of 7,200 bottles per hour, optimized for a 0.40-liter format. It uses HDPE bottles weighing 19 to 20 grams, each closed with a polyethylene (PE) snap-on cap weighing 3.2 grams. Although the system has remained idle since 2018–2019, technicians completed a full overhaul before decommissioning. As a result, the Used Bottling Line Serac for HDPE remains in good mechanical condition. Container Type and Format Flexibility of the Used Bottling Line HDPE Lhjdpewa Tqijfx Akuog The Used Bottling Line Serac for HDPE handles 400 ml HDPE bottles equipped with snap-on PE caps and sealed with a foil membrane. Its weight-based filling technology guarantees high accuracy and hygienic compliance, which is essential for dairy processing. In particular, this setup of the Used Bottling Line Serac for HDPE suits non-carbonated liquid products. Additionally, operators can upgrade the system to handle 500 ml bottles, with only minimal adjustments required. Unlike threaded capping systems, this line uses press-fit closure, which simplifies maintenance and enhances sealing consistency. Therefore, it provides an effective and reliable solution for bottling in sensitive food sectors. Bottle Feeding and Preparation Section At the start of the process of the Used Bottling Line Serac for HDPE, the bottle unscrambler, built by Lanfranchi in 2008, feeds loose HDPE bottles into the conveyor system in the correct orientation. Meanwhile, an Auto Jet Spray unit by Autojet Technologies (2012) cleans the bottle necks using high-pressure air jets, effectively removing dust or particles. Furthermore, Lanfranchi conveyors installed in 2008 transport bottles between stations while maintaining smooth line flow and bottle spacing. These components ensure mechanical integrity and reduce handling errors. As a result, the Used Bottling Line Serac for HDPE achieves both efficiency and reliability in its initial stages. Weight-Based Filling and Snap-On Capping The Used Bottling Line Serac for HDPE filling machine, manufactured in 2008, features 12 weight-based filling heads that deliver precise product dosing. Following the filler, a Zalkin cap sorter (U9000, 2008) orients and feeds snap-on caps to the SERAC cap press (CAP PRESSMP2, 2008). The press then applies each cap onto the bottle with controlled vertical pressure. Meanwhile, a foil applicator applies a seal to the container mouth before the cap is pressed. The absence of screw torque components simplifies operation and reduces wear over time. Sleeve Labeling and Final Packaging of the Used Bottling Line HDPE After capping in the Used Bottling Line HDPE for dairy products 7200 bph the labeling phase begins.

Condition: used, Used Sacmi Filling Line for Bag in Box, Up to 650 Bags/Hour Introduction to Efficiency and Precision The used Sacmi filling line exemplifies efficiency, targeting Bag in Box applications with up to 650 bags/hour capacity. Importantly, it stands ready for operation, facilitating seamless integration into production lines. Versatility in Container Handling of the Filling Line for Bag in Box Additionally, this machinery accommodates a variety of Bag in Box sizes, including 3 L, 5 L, 10 L, and if needed also for 20 L. This versatility ensures that producers can meet diverse market demands with ease. Innovative Filling Methodology Furthermore, the line employs a sophisticated gravity and light depression filling technique. Specifically, this approach is designed to handle still wine, optimizing quality preservation during the filling process. Operational Efficiency and Speed Moreover, the filling line is engineered for maximum operational efficiency. It achieves remarkable speeds of up to 650 bags per hour. Consequently, this capability supports high-volume production requirements. Adaptability to Various Formats The machine’s format adaptability is a key feature, enabling swift changes between different Bag in Box sizes. Thus, it reduces downtime and enhances production flexibility. Gravity/Light Depression Filling Advantages Additionally, the gravity and light depression method minimizes wine oxidation risks. It ensures the wine’s organoleptic properties are preserved, maintaining product quality from filling to consumption. Lhodpfx Akjvvh Sueujg Technical Specifications for Optimal Performance of the Filling Line for Bag in Box The filling line’s technical specifications are tailored for still wine products. The gentle filling process safeguards the wine against agitation, crucial for maintaining taste and aroma integrity. Maintenance and Operational Readiness Regular maintenance checks are essential for sustaining operational readiness. The design facilitates easy access for maintenance, promoting efficient problem-solving and minimizing potential downtime. Enhancing Production Throughput Importantly, the ability to quickly adjust to different bag sizes enhances production throughput. This adaptability is crucial for meeting varied packaging requirements without sacrificing speed or efficiency. Conclusion of the Filling Line for Bag in Box In conclusion, the used Sacmi filling line for Bag in Box applications up to 650 bags/hour represents technical excellence. Its design prioritizes efficiency, versatility, and quality, making it an invaluable asset for wine bottling operations seeking to optimize their production capabilities while ensuring product integrity.

Condition: used, operating hours: 1,800 h, Used Bottling Line for champagne, sparkling and still wine 4000 bph Product Compatibility and Filling Technology This bottling line processes still wine, sparkling wine, and champagne with high efficiency. Specifically, it handles only glass bottles and uses an isobaric filling system, which ensures precise control when filling pressurized liquids, such as sparkling products. As a result, wineries that produce multiple wine types with different physical and chemical properties can rely on this line for consistent, adaptable operation. In other words, the system addresses diverse product demands without compromising output quality. Lhjdpfxewgw Dgs Akujg Performance Output by Bottle Format Depending on the bottle format, the line delivers different outputs. It processes both 0.20l and 0,375l bottles at 4,500 bottles per hour. Meanwhile, it handles 0,75l bottles at 4,000 bottles per hour and 1.5l bottles at 2,000 bottles per hour. Therefore, this production speed suits medium-scale wineries that require flexibility while maintaining industrial performance. Commissioning, Runtime, and Immediate Availability Technicians installed the line in 2022. Since that time, it has operated for 1,800 hours and produced approximately 2,400,000 bottles. The system continues to run in production, which means it remains in good operational condition. Furthermore, its immediate availability offers an advantage to wineries needing rapid deployment. Because of this, buyers can integrate the equipment without significant downtime. Primary Bottling Block: Depalletizing, Rinsing, Filling, and Capping The process starts with a Duetti Packaging depalletizer, model M, which automatically feeds empty bottles into the system. Subsequently, the GAI monoblock, model 4033RES-HP-A01, performs rinsing, filling, and capping in a single integrated unit. The dual-stage rinser (water + gas) uses 16 grippers to sanitize bottles. A high-pressure electropneumatic filler with 24 valves carries out isobaric filling. Notably, the 3-head rotary corker applies straight corks, champagne-style mushroom corks, plastic closures, and aluminum screw caps. Moreover, the monoblock includes multi-format screws, motorized guide adjustments, dummy bottles for internal rinser sterilization, and a solenoid valve kit to switch between gas and cleaning liquid inputs. Altogether, this configuration provides high precision, minimal changeover time, and excellent bottle handling. CIP and Quality Control: Cleaning and Inspection Systems To maintain hygiene, the WIN&TECH CIP unit, model Win&Guard C 23.05, manages automatic cleaning via a steam-water heat exchanger and a three-stage filtration system across two independent circuits. Additionally, this system allows operators to sanitize the internal components between production runs without disassembly. At the same time, the CMP inspection unit, model CV-MUF108, performs continuous quality control.

Condition: used, operating hours: 11,000 h, Used Bottling Line SIDEL for still water 14400 bph The Used Bottling Line SIDEL for still water 14400 bph delivers a complete solution for bottling still water in PET containers. The line handles 0.50-liter, 0.75-liter, and 1.5-liter bottles, offering flexibility for beverage producers. The Used Bottling Line SIDEL operates at a nominal capacity of 14,400 bottles per hour, making it ideal for medium to high-volume production environments. As a result, technical teams can integrate this system into existing plants or install it as a standalone unit to achieve consistent, high-throughput output. Core Unit of the Used Bottling Line SIDEL: COMBIBLOCK SIDEL 8-40-8 In this Used Bottling Line SIDEL we find the COMBIBLOCK SIDEL 8-40-8, manufactured in 2006, performs blow molding, filling, and capping in a single integrated unit. First, the SBO 8 blow molder forms PET bottles from preforms using 8 cavities, supporting all three bottle formats. Next, the COMBI UNIVERSAL EUROPA WM filler uses 40 volumetric filling valves to deliver precise product dosing and minimize waste during production. Because the system uses volumetric filling, it provides consistent accuracy, especially for low-viscosity products such as still water. Then, the capping unit applies caps using 8 heads on bottles with 25 to 30 mm neck diameters. In addition, operators can perform quick format changes and maintain compatibility with industry-standard closures. Secondary Packaging: CERMEX Tray Packer in the Used Bottling Line SIDEL Following the filling and capping process, the CERMEX tray packer, installed in 2007, arranges and packs bottles in pre-defined tray configurations. It forms the following bundles: 1.5-liter bottles in a 2×3 configuration 0.75-liter bottles in a 4×3 configuration Ledsv U Ni Sjpfx Akuehg 0.50-liter bottles in a 4×3 configuration Consequently, the unit ensures consistent secondary packaging and supports downstream palletizing operations. Moreover, the machine maintains uniformity across batches and eliminates manual packing variability. Therefore, it significantly increases line efficiency. Compressed Air Supply: High and Low-Pressure Compressors The line includes two compressors that support the blow molding and cooling systems. Specifically, the SIAD TEMPO 2 high-pressure compressor delivers 1,500 m³/h and supplies compressed air to the SBO 8 blow molder. In contrast, the BAC F-100 low-pressure compressor, manufactured by Baltimore Aircoil in 2006, supports the evaporative cooling process. Together, these compressors maintain optimal conditions for both product quality and mechanical performance. Bottle Conveying System: SIDEL Conveyors The SIDEL conveyors, installed in 2006, transfer bottles between stations smoothly and efficiently. As a result, the conveyors synchronize movements across modules and prevent accumulation or blockages.

Condition: used, Used Wine Bottling Line For Glass Bottles of 3L – 2000 BPH Technical features: 150 mm chain Production: 2000 carboys per hour Voltage: 380 Low voltage: 24v Frequency: 50Hz Working direction: right to the left Worktop height: 1240mm Carboy base format diameter: 51, 179 × 340 This line includes big italian brands, like Bardi, Bertolaso and Cavagnino&Gatti. The bottling line ends with labelling equipment, so different packing systems can be attached as needed. This can be standard cardboard boxes or tray plus film or wrap-around system closure. The two bottle sizes worked are 1,5L and 3 L but if needed this can be adapted for 0,75 L too. With additional payment it can be upgraded to create equipment for the inlet and outlet, the 0,75 L bottle size. It has a satin cork corker and aluminium screw cap capper, and an 8 head labeller with two adhesive stations. It performs gravity filling for still liquids. The washer  is for cleaning the new bottles inside and outside for one-way production. Lhsdpfxevguwls Akuog Regular maintenance has been done on all equipment of the line, so it can be reassembled without critical problems. Our professional team can help you realize this project, supporting you both in the tech department and with an engineering consultant.  

Condition: used, operating hours: 52,428 h, Used Bottling Line for Sparkling Beverages up to 9000 bph The used bottling line for sparkling beverages up to 9000 bph effectively manages the production of still and sparkling water, as well as soft drinks, in PET containers. This line features interconnected machines, which, together, ensure a continuous and effective workflow. Additionally, each machine in the line operates in isobaric mode, optimizing filling for sparkling beverages. As a result, the system handles up to 9000 bottles per hour, making it a powerful solution for high-output bottling. Containers and Product Type in the Bottling Line For sparkling beverages The system, specifically designed to fill PET containers, provides durability and lightness, making them ideal for both sparkling and still beverages. Furthermore, this line specializes in processing still and sparkling water, along with other non-alcoholic drinks. Using isobaric technology, the line effectively preserves effervescence throughout filling, which, in turn, maintains product integrity and enhances taste quality. Blow Molding Machine – SMI EBS 2016 The SMI EBS blow molding machine, model EBS from 2016, forms PET containers directly on-site. Specifically, it transforms preforms into bottles, ensuring consistent size and container strength. Therefore, this integrated blow molding machine increases efficiency by minimizing reliance on external bottle supplies and maintaining high-quality production standards for the CFT Bottling Line For sparkling beverages. Filling Monoblock – CFT Master EW 32/32/8 2012 The CFT Master EW 32/32/8 filling monoblock, a central component of the used bottling line for sparkling beverages up to 9000 bph, combines rinsing, filling, and capping in one compact unit. Notably, this system uses isobaric filling to keep internal container pressure stable, which is especially beneficial for carbonated beverages. In this way, the setup reduces waste and effectively protects the product’s quality. Labeling Machine – P.E. Labellers Universal M/S 15T/960/3S – 4E 2009 Lhodsvgvbropfx Akuog The P.E. Labellers labeling machine, model Universal M/S 15T/960/3S – 4E from 2009, applies labels to PET containers with precision. Label application helps with product identification, in addition to ensuring regulatory compliance. Furthermore, this model offers flexibility and accuracy, especially for containers of various shapes and sizes for the CFT Bottling Line For sparkling beverages Sleevering Machine – Nortan NORTAN 50 2008 The Nortan NORTAN 50 sleevering machine from 2008 of the CFT Bottling Line For sparkling beverages adds protective sleeves to containers, enhancing aesthetics and protecting them from contamination. In addition, this process proves essential for beverages stored or transported over long periods. Thus, the used bottling line for sparkling beverages up to 9000 bph benefits from this feature by improving product durability on store shelves.

Condition: used, operating hours: 1,000 h, Used Doypack Filling Line kg/h Filling Line Technical Configuration The used Doypack filling line, rated at 600 kg/h, comprises a series of 2015 machines that offer precision, hygiene, and reliability in filling flexible pouches. The process begins with product preparation and feeding, ensuring uniform consistency and stability before filling. Next, a FL Tecnics machine, model FL 2.2, handles pouch feeding, weight filling, sealing, and packaging. Specifically, a VARPE control system measures the weight of the product in each pouch with high precision, minimizing variations and waste. Lhedpfxevguc Ue Akuog Simultaneously, another VARPE unit performs an X-ray inspection, which detects any contaminants or structural issues. Consequently, this adds a crucial level of safety and quality control. Meanwhile, a spiral airflow pasteurizer manufactured by SARP performs the pasteurization phase. Unlike other systems, this design treats the product uniformly, preserving its organoleptic characteristics. Finally, a cartoner completes the packaging process, efficiently organizing and preparing the filled pouches for shipping. Taken together, these components comprise the 600 kg/h Doypack/Tetra Pak filling line used to ensure a safe, uniform, and high-performance packaging process. Production Performance and Operating Conditions The 600 kg/h Doypack/Tetra Pak filling line used processes up to 600 kilograms of product per hour. Thanks to its design, it maintains consistent dosing and minimizes downtime. Its weight-based filling system ensures precise volumes in each pouch, thus reducing overfilling and meeting production specifications. Notably, the line has only been in operation for approximately 1,000 hours, during which it has produced approximately 5 million pouches. Therefore, the system remains in near-new condition. Therefore, plants can count on long-term reliability with minimal wear. In terms of maintenance, this translates into reduced operating costs and longer uptime. Versatility in Product Types and Formats The Doypack/Tetra Pak filling line used operates with pouch sizes from 90 grams to 150 grams, using weight-based precision filling. Thanks to this, operators can process a wide range of products, including infant formula, ready-to-drink beverages, dairy products, sauces, and creams. More importantly, technicians can easily adjust dosing parameters to accommodate varying product viscosities or packaging standards. As a result, this system offers high flexibility to companies operating multiple product lines. Furthermore, weight-based filling improves yield accuracy, helping manufacturers meet labeling and legal compliance requirements. Operational Safety and Technical Documentation Each machine on the Doypack/Tetra Pak filling line includes integrated safety devices compliant with European standards. These include mechanical guards, interlocks, and alarms that proactively protect personnel.

Condition: ready for operation (used), TETRA PAK COMPLETE FILLING LINE, INCLUDES: - TBA/8-1000 SLIM FILLER, VERSION 120, YOM 2009, 27.000 RUNNING HOURS - CAP30 HELICAP23 100V CAP APPLICATOR - TCBP70 WRAP AROUND PACKER, V110 WITH RENOVATED EL. BOX Ledpfxjxz Ezts Akujhg - EASY RIDE ACCUMULATOR - CONVEYOURS SYSTEM EXCELLENT CONDITION, STILL RUNNING

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Mzsf010, overall weight: 500 kg, total width: 1,200 mm, total height: 2,000 mm, total length: 2,200 mm, tank capacity: 30 l, compressed air connection: 0.5 bar, Equipment: CE marking, This line is suitable for automatic liquid filling of small glass bottles or plastic bottles. The whole line consists of a filling and capping machine, a labeling machine and a front and a final rotating table. Lhsdsyg D Nbspfx Akusg The whole line can realize automatic bottle feeding - liquid filling - inner plug auto feeding and sealing- outer cap feeding and capping - wrapped around labeling - finished product collection and other functions. The whole line needs about 1-2 operators to operate and patrol, saving manpower. According to the customer's workshop layout, the whole line can be customized as I-shaped or L-shaped.

Condition: new, Year of construction: 2025, We produce and install complete plants for water and juice , still or carbonated. The complete line consists of : bottle blowing machine, automated feeding PET , compact washing , filling and capping machine. Each capping machine has automated cap feeder and sterilization station for caps. We provide high productivity filters and CIP automated hygienisation station. As option we can add the carbonated station completed with chiller and heat exchange unit. After bottles are filled we install X ray machine for inspection, oven for increasing liquid temperature, water blowing machine to clean the bottles, labeling machine, date and lot machine, bottle case packing machine, palletising unit, stretch film machine to hold pallets. Ljdsu Nad Tspfx Akuehg

Condition: new, Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: Mzvfm001, Equipment: CE marking, Automatic Eye drop filling machines are suitable for use in pharmaceutical, chemical, food, and light industries to fill glass, plastic, and metal containers using vacuum negative pressure and self-priming. The machines are designed for containers with small openings, where the surface tension of the liquid within the opening should exceed the static pressure. Examples include plastic bottles for oral liquids, medicated oil bottles, eye drop bottles, cosmetic perfume bottles, and battery fluid filling machines. Ledpfjygd Anox Akuohg

Year of construction: 2026, operating hours: 1 h, condition: new, functionality: fully functional, machine/vehicle number: Mzvbf01, Equipment: CE marking, Automatic vial bottle filling machine.this machine type normally customized by the customer vial bottle type and requirement of the production .It widely used for the pharmaceuticals and industry. Filling and Capping: The process involves automatic bottle loading, automatic capping, automatic filling, automatic capping, and bottle discharging, all completed without human contact. It employs a peristaltic pump for filling and a servo control system; the equipment's transmission is fully servo-controlled. The capping torque is adjustable. Lhodpfox Tg Tqsx Akusg The equipment is equipped with a buffer tank and a weighing function (Mettler-Toledo electronic scale) to control the liquid level by weight. It also features a magnetic stirring function. All parts in contact with materials are made of 316L stainless steel, conforming to GMP standards.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MZOF01, type of input current: three-phase, total width: 900 mm, total length: 1,200 mm, total height: 2,200 mm, input voltage: 220 V, workpiece weight (max.): 450 kg, pass-through height: 1,200 mm, Equipment: CE marking, This filling machine could be linear tor rotary type which is designed according to customers capacity and filling volume. It Ljdexul Igepfx Akujhg suits different size of plastic and glass bottles, and the height of the filling nozzles is adjustable. The filling nozzles are made of SS304 or 316, resist high temperature filling. drip-proof , via photoelectric detection to ensure no bottle no filling. Widely used for liquid and paste filling. Also can be customized for other types of filling based on customer requirement.