Used Borema Umwelttechnik Ag R-1200F for sale (70,350)

Year of construction: 2013, condition: used, We offer you a used PET bottle crusher of the manufacturer BOREMA, type R-1200 F, year of construction 2013, for residual emptying, deaeration and pre-compaction of the fed PET bottles, from 0.3 up to 2.5 l content. The machine has a chassis and can be moved into and out of the feed chute of your baler. The machine has a throughput capacity of approx. 85,000 bottles/h, corresponding to approx. 3t/h. We have the following technical information: Manufacturer: BOREMA Umwelttecjhnik AG Type: R-1200 F (with trolley for retracting and extending) Year of manufacture: 2013 Drive power: 11 kW Connected load: 15 kW Rated current: 32 A Back-up fuse: 40 A Type of construction: Continuous system Function: Double rotor press system Rotor pretension pneumatic: approx. 16t Overload protection: by anti-blocking system Input material: PET disposable and returnable empty bottles 0.3 to 2.5 L capacity Input material: HDPE bottles and canisters up to 3 l capacity Throughput capacity: approx. 3 t/hour, corresponding to approx. 85,000 bottles/hour, depending on size Required compressed air output: G1/2", 8 bar, 40 l/min. Compression ratio: 1:3 Flange dimensions inside: 972 x 1220 mm Feed opening: 565 x 1280mm Weight: approx. 2500kg Possible applications: Due to the chassis, the PET flattener can be moved into the feed chute of your baler as required, thus ensuring residual emptying, venting and pre-compaction of the fed bottles and canisters. When the material is changed, the PET flattener is simply moved out of the feed chute again and paper, cardboard, film, etc. can now be pressed further without using the flattener. Process of the BOREMA PET crusher: The plastic packages are drawn in by two rotating shafts. One of the rotating shafts is pneumatically pretensioned by two air bellows and presses the PET bottles with 16 t of pressure against the second rotating shaft. In the process, the closed plastic bottle is squeezed together, caused to burst and vented. Residual liquids run out and the material falls into the baler in a precompressed state. When impurities are introduced, the pneumatically pre-tensioned shaft deflects to the side and the impurities are channeled through. Significant advantages compared to conventional PET perforators with punching mandrels or knives: The BOREMA process is much more efficient and less subject to wear than conventional PET perforators with punching mandrels or knives. The biggest advantage is that any foreign matter such as metal parts, stones, bottles with frozen contents and pieces of wood are passed through the pneumatically deflecting rotor shaft without stopping the operation of the system or causing any major damage. With conventional perforators, mandrels or blades sometimes break off or become so jammed with the interfering material that the plant has to be shut down and repaired at great expense. Comments: Lhjdpfsu Thpnjx Akujg The crusher is in good condition, was dismantled from the running operation, stored, is available at short notice and after assembly immediately ready for use. The documentation (manual, CE, electrical/hydraulic circuit diagram) is complete. An inspection is possible by arrangement. The technical information is taken from sales brochures, the operating instructions or other information provided by the manufacturer. We accept no liability for incomplete or incorrect data and informations.

Condition: used, Used approximately 13,400 litre Inox-Maurer AG stainless steel reactor body. Unit has an approximately 770 litre external coil. Unit is rated 2.0 / -1bar internal operating at 200degC. External coil is rated 16.0bar operating at 200degC. Unit has an internal material of construction of 1.4435 and external coil of 1.4306. Specifications: Lhodey Ryrnepfx Akueg Capacity: 13,400 L

Year of construction: 2014, condition: like new (used), functionality: fully functional, Unique bending roll machine with servo drive, fully CNC controlled. Lhedpfoy S Sx Asx Akujg

Year of construction: 1995, condition: ready for operation (used), Rated current: 22A, connected load: 15kVA, with extensive accessories, the machine is fully functional. An on-site inspection is possible. Ledpfxsy Tx Sxo Akuohg

Year of construction: 1990, condition: ready for operation (used), functionality: fully functional, Connection voltage: 380V, connected load: 7.5 kVA, specific power consumption 2 kW/m² Lhjdpeytr Swefx Akujg Global UV weathering tests with global spectrum (similar to xenon arc), but using fluorescent tubes Test chamber volume: 200 liters Test area: 0.75 m² Test chamber dimensions (H x W x D): 1100 x 800 x 250 mm Temperature range without insulation: -20°C to +90°C Temperature range with insulation: +10°C to +90°C Temperature consistency: ±2 K Dew point temperature range: +5°C to +40°C Humidity range: approx. 15–95% relative humidity Sample humidification with 8 spray nozzles The system utilizes fluorescent UV light sources to simulate the damaging spectrum of sunlight in the laboratory, thereby accelerating aging effects such as color change, loss of gloss, cracking, embrittlement, and material degradation. Programmable cycles of UV exposure, temperature control, and optional humidity or condensation phases are used to realistically replicate and reproducibly repeat environmental stresses. Dismantling by buyer.

Condition: excellent (used), Professional industrial pad printing machine from the renowned Swiss company Teca-Print AG. The device is designed for printing on components made of plastic, metal, wood, and other technical parts. Robust industrial construction, ideal for series production, technical marking, advertising prints, logos, and product marking. The machine is in good visual and technical condition. Technical Data: Manufacturer: Teca-Print AG Model: TPU 250 Type: pad printing machine Power supply: 220 V Frequency: 50 Hz Pneumatic control Foot-operated pedal Adjustable worktable Heavy-duty industrial build Manufactured in: Switzerland Serial No.: 9708305 Applications: Lhsdpfxoy St Skj Akuog - printing on plastics - marking metal components - technical prints - logos and advertising - series production - marking industrial parts Includes: - Teca-Print TPU 250 machine - documentation / manuals - accessories as shown in the photos

Condition: good (used), Year of construction: 2002, functionality: fully functional, Rolandmatic alcohol dampening Technotrans Beta d refrigeration device perfecting 1+1 / 2+0 high pile delivery RCI ink and register remote control PPL semi-automatic plate loading ink rollers, blanket cylinders, offset cylinders automatic wash up device Grafix powder sprayer Pecom system Preset Ljdpfx Aey Sh Umokuohg Auto washers Condition of the Machine: Functional, condition and wear and tear according to its age, well maintained. Can be seen running. Availability: immediately Sale Reason: closing company

Condition: not inspected (used), functionality: limited functionality, load capacity: 1,200 kg, lifting height: 2,800 mm, load center: 600 mm, Equipment • Electric drive for travel and lifting • Tiller control • Compact design, highly maneuverable • Ideal for pallets, beverage crates, production material Lhjdpoy Rh Uqofx Akujg Condition Unit is basically functional. Battery is defective and needs to be replaced or refurbished. Hydraulics, mast, and drive are functional based on last use. Significant signs of wear. Battery Industrial battery is present, but no longer operational. Ideal for buyers with their own battery or technical expertise.

Condition: good (used), Year of construction: 1994, functionality: fully functional, space requirement height: 2,440 mm, overall weight: 1,480 kg, pressure: 2 bar, total width: 1,300 mm, total length: 1,850 mm, total height: 1,650 mm, filter area: 0.75 m², operating temperature: 200 °C, Enamelled steel filter nutsche Estrella AG, Switzerland Capacity: 760 litres, filter nutsche, suction nutsche, pressure filter Year of manufacture: 1994 Documentation: complete Operational condition: fully functional Diameter: 1000 mm Filter area: 0.75 m² Permitted operating pressure: -1/+2 bar Lhsdpfeu U Afusx Akusg Permitted operating temperature: -10/+200 °C Support structure: upright on legs with subframe Opening: hydraulic opening assistance Enamel quality: blue colour, Email 2000 Estrella Total volume: 760 litres Overall height open: 2440 mm Height closed: 1590 mm L x W: 2000 x 1300 mm

Condition: refurbished (used), functionality: fully functional, rotational speed (min.): 1,450 rpm, rotational speed (max.): 1,750 rpm, Refurbished Landert Motor Manufacturer: Landert Motoren AG Bülach Type 132S-RFA4A, 1450/1750 rpm, 400V, 50/60 Hz, 5.5 kW (Grinding auger drive) Lhodpow Rn Hxjfx Akueg Price: € 1,350 net ex-location, plus packaging costs All technical specifications are subject to errors and omissions. Sale exclusively to EU countries.

Condition: used, Year of construction: 1996, total height: 2,150 mm, total length: 1,420 mm, total width: 2,010 mm, overall weight: 3,100 kg, grinding spindle speed: 6,000 rpm, travel distance X-axis: 400 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 580 mm, CNC Universal 5-Axis Tool-and Cutter Grinder CNC Control HMC 400 CNC X-axis movement 400 mm Y-axis movement 250 mm Z-axis movement 580 mm C-axis (table rotation) ± 200° Max diameter grinding wheel Ø 200 mm Lsdpfx Akey Egl Doujhg Spindle speed (grinding) 3000 / 6000 R/Min If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: used, functionality: fully functional, power: 375 kW (509.86 HP), first registration: 01/2018, Year of construction: 2017, operating hours: 8,000 h, machine/vehicle number: WKU5826MAGL012505, Used PistenBully 600 W Polar for Sale – 2017 – Ready for Lhsdpfxsy Eh Ele Akusg We offer a used PistenBully 600 Wide Polar, year of manufacture 2017, the first registration 1/2018, in good working condition. The machine has been regularly serviced and is fully operational. It is ready for the upcoming winter season.

Condition: refurbished (used), functionality: fully functional, overall weight: 540 kg, total length: 905 mm, total width: 950 mm, total height: 1,125 mm, Year of construction: 2013, operating hours: 50 h, input frequency: 50 Hz, shaft diameter: 40 mm, type of input current: three-phase, Equipment: emergency stop, rotational speed infinitely variable, Profile Bending Machine ARKUS12 Tablet350 (refurbished) For sale is a profile bending machine ARKUS12 with Tablet350 control system, year of manufacture 2013. The machine was completely refurbished in 2026 and technically upgraded to the new Tablet350 control system. With only approximately 50 operating hours since the overhaul, the machine is in an excellent, nearly new condition and is available immediately. Technical Data: Machine type: Profile Bending Machine Manufacturer / Model: ARKUS12 Control system: Tablet350 (2026 upgrade) Year of manufacture: 2013 Operating hours: approx. 50 hrs Lhjdsy Exdfepfx Akuog Condition: As-new, fully refurbished and upgraded Warranty: 2-year warranty on electronics Availability: Immediate Further technical details and specifications as per manufacturer can be found at pbt-ag.com. Note: The sale is made under exclusion of liability for material defects, except for the stated warranty.

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: type plate available, AE 100 liter reactor vessel, enameled steel, manufacturer Estrella AG, Switzerland. Year of construction 1995, total capacity 135 liters, double jacket with 40 liter capacity. Perm. operating pressure vessel -1/+6 bar, perm. operating pressure double jacket -1/+6 bar. Perm. operating temperature -25/+200°C, enamel color blue, impeller agitator, mechanical seal. Hand hole, sight glass lamp, 400 V EX drive, bottom drain valve, baffle with PT 100 temperature probe. For questions and further information please contact us, we will be happy to answer your questions, Cycron GmbH Lodpfxou Ibgto Akujhg

Condition: excellent (used), Year of construction: 2015, Massive Parquete production line Manifacturer - MICHAEL WEINIG AG / GMC SERVICE Year - 2015/2007 Capacity - 800m2/ shift Max Width of Parquet- 200 mm Max length of Parquet - 2.400 mm Complete line for production normal solid parquet ! On this line it is possible to produce different dimensions at the same time ! Kind of parquet - Herringbone 90 , Chevron 45/60 Lsdpfx Asyzfr Uekuehg Condition - Exellent

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche Pressure Filter Vacuum Filter Pressure Nutsche Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Complete set available Model designation: Pressure Filter Nutsche Vacuum Filter Suction Filter, 62 litre capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404 Total heating/cooling chamber volume (L): 10 Weight (kg): 204 Total vessel capacity (L): 62 Permissible operating temperature vessel (°C): -20/+150 Permissible operating pressure vessel (bar): -1/+6 Permissible operating pressure heating (bar): -1/+6 Permissible operating temperature heating (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Standing on feet Heating material: 1.4404 Ledjxxxqvopfx Akuohg Country of manufacture: Switzerland Accessories & fittings: Manometer, safety relief valve, sight glass, ball valve, Camlock coupling, lid opening aid

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, filter area: 0.283 m², Nutsche pressure filter, suction nutsche, vacuum filter, stainless steel, Halar® coated Year of manufacture: 2009 Condition: Used Availability: In stock Documentation: Fully available Description/Type: Halar® pressure filter, nutsche, vacuum filter, suction filter, 62 liter capacity Operational: Yes Filter area: 0.283 m² Material: Stainless steel 1.4404, interior Halar® coated Total heating/cooling jacket volume (L): 10 Weight (kg): 230 Total vessel volume (L): 62 Permissible operating temperature vessel (°C): -20/+150 Lodsxx Sy Dopfx Akuehg Permissible operating pressure vessel (bar): -1/+6 Permissible heating pressure (bar): -1/+6 Permissible heating temperature (°C): -20/+150 Design overpressure (bar): 11.5 Support structure: Upright on legs Heating material: Stainless steel 1.4404 Country of manufacture: Switzerland Accessories & fittings: Pressure gauge, safety valve, sight glass, ball valve, Camlock coupling

Year of construction: 2012, condition: repair required (used), functionality: limited functionality, Fully automated test bench for testing fuel cell components Max. output 500 W (max. current: 100A, max. voltage: 35V) Gases can be temperature-controlled, humidified and pressurized; nitrogen purging available Anode: 0.04-2 Nl/min hydrogen, cathode: 0.1-5 Nl/min air or 0.02-1 Nl/min oxygen Lhsdeytr R Hepfx Akusg Includes power cable, proprietary Testwork® software from the manufacturer, measurement PC Central control unit (PLC) defective

Condition: good (used), Bosch Rexroth Aluminum Profile Workstation Bosch Rexroth Aluminum Profile Complete plastic glazing 4 cm worktop with a light gray melamine resin direct coating 190 x 90 cm Workstation dimensions W x D x H 195 x 93 x 220 cm Magnifying lamp 8062D2 More new and used items - find them in our shop! International shipping costs on request! Ledpfxjqbq E Eo Akuohg

Year of construction: 2013, condition: excellent (used), functionality: fully functional, machine/vehicle number: M284 2013.5.2, For sale is a Steinhauer eCAB WorkCenter CNC machining center, year of manufacture 2014, in very well-maintained and fully functional condition. The last service was performed on 13.08.2024. The machine is immediately ready for operation. The eCAB WorkCenter was specifically developed for professional switch cabinet construction and is ideally suited for automated processing of mounting plates, doors, side panels, and other enclosure components. It enables precise drilling, milling, and thread cutting of components made from steel, stainless steel, aluminum, and plastic. CAD-assisted processing is carried out via a CNC controller with high repeat accuracy – ideal for both single-part and series production. Technical Highlights: - CNC machining center specifically for switch cabinet manufacturing - Automated machining of mounting plates, doors, and enclosure components - Suitable for steel, stainless steel, aluminum, and plastic - High precision and repeat accuracy - User-friendly CNC control / software Machine Data: Manufacturer: Steinhauer Model: eCAB WorkCenter Year of manufacture: 2014 Last service: 13.08.2024 Condition & Service: - Very well maintained, fully functional - No known technical defects - Inspection and test run possible by appointment Scope of Delivery: - eCAB WorkCenter including control system Lhodoymw Hajpfx Akusg - Accessories / tool holder - Documentation / computer including software

Condition: excellent (used), functionality: fully functional, Year of construction: 2019, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, Lhjdpfx Akjwydbxsueg for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), Leutenegger (Starrag) wash box Technical specifications Lhsdpfx Ajd Nlybjkueg Bath contents: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V / 230V 50 Hz Supply line: 40A Control voltage: 24 V DC Temperature max: 50 ° C Heating electric Heating power: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3 / h Shipping costs on request Financing through our bank is also possible. komplett-konzept.leasingo.de More articles - new and used - can be found in our shop! International shipping costs on request

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Lhjdpfx Aksrnnt Isuog Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Condition: good (used), Year of construction: 2019, total length: 3,250 mm, total width: 1,000 mm, total height: 2,400 mm, 4 compartment trolleys - sorting system 25 compartments Ljdjwld Euspfx Akujhg max. glass size 3000x2000 mm

Condition: ready for operation (used), Weight: 2.2t, including documentation. Lsdpfxsmqly Us Akuehg