Used Gildemeister Nef 500 Plus for sale (19,305)

Condition: used, Year of construction: 1999, turning diameter 500 mm turning length 1500 mm control Manual Plus spindle bore diameter 70 mm turning speed range 8 - 2800 U/min transmission ratio 3 swing diameter over face slide 290 mm spindle head DIN 55027 Gr 8 tool holder Typ C quill stroke 180 mm weight of the machine ca. 3,2 t dimensions 3,0 x 1,8 x 1,8 m Description of the machine: This machine is suitable for turning chucked and shaft workpieces. The commercially available steel grades, casting, copper, aluminium, brass, gunmetal and cuttable plastic can be turned on this machine. --> Concept of the N.E.F. plus The machine si supplied as standard with the following described equipment - Cycle control - AC-Main drive - Compund slide rest with AC drive and operating panel - Tailstock traversable using slavingunit, manualy clamped, including following centre point - Coolant unti - Chip protection hoods, manually actuated - Protection hood for chuck - Fast change tool holder Hahn & Kolb Multifix C - Reduction collar for turning spindel accessories according to pictures: - 2 STK steady rests - various clamping jaws - Hahn & Kolb Multifix type C - Various torsion bar holders Technical data: Working area: - Circulation diameter over bed: 500 mm - Circumferential diameter above the radial slide: 285 mm - Chuck Ø: 250(315) mm - Face slide: 260 mm - Distance between centres: 1000/1500 mm Turning spindle: - Spindle head DIN 55027: Size 8 Ledpfx Aksub Amloujhg - Hole diameter of the spindle: 70 mm - Hollow taper of the spindle nose: 80 metric - Spindle diameter in front bearing

Condition: ready for operation (used), Year of construction: 1995, Make: GILDEMEISTER Type of machine: NEF Plus 500 Year of manufacture: 1995 Lhjdpfx Akjtpn S Iouog Control system: Gründig Machine's weight: 2650 kg Speed range: 8 - 2800 1/ min Cutting diameter: 500 mm Turning length: 1000 mm Overall dimensions: 2500 x 1750 x 1850 mm Spindle opening: 70 mm

Year of construction: 1996, condition: ready for operation (used), A cycle-controlled CNC lathe Gildemeister is available. Center distance: 1500mm, max. turning length: 1500mm, swing diameter over bed/cross slide: 500mm/290mm, speed: 2800rpm, spindle bore: 70mm, spindle torque: 1050Nm, travel X/Z: 260mm/1600mm, rapid traverse X/Z: 6m/8m/min, feed rate: 5m/min, feed force: 5kN, tailstock quill stroke: 180mm, tailstock quill diameter: 80mm. Machine dimensions X/Y/Z: approx. 3200mm/1800mm/1900mm, weight: approx. 3100kg, operating hours: 79727h. Documentation available. On-site inspection is possible. Lhodpfx Asx Uq Uhokusg

Condition: used, Lathe Gildemeister Nef plus 500, year of manufacture 1996. Dimensions are approximately 3 m long, 1.70 m high, 1.5 m deep. Lsdpfoxurd Uox Akujhg

Condition: good (used), Year of construction: 1996, Description: For sale is a Gildemeister NEF Plus 710 lathe, year of manufacture 1996, in operational condition and ready for immediate use. The machine has been regularly maintained and is in good condition. Ideally suited for precision turning of metal and plastic components. General technical specifications of the Gildemeister NEF Plus 710 (Year: 1996) Technical Data: Machine type: CNC lathe Model: NEF Plus 710 Year of manufacture: 1996 Control: Siemens 810T (or comparable) Workpiece diameter: max. 710 mm Turning diameter: max. 710 mm Turning length (range): up to approx. 1000 mm Spindle speed: 30 – 2,500 rpm Drive power: 15–22 kW (depending on version) Spindle mount: A2-6 Cooling: Integrated coolant system Included: Tool holder (VDI), standard equipment Ljdpoygdgasfx Akujhg Special Features: Operational condition: The machine is fully functional and ready for use. Location: Collection in Langenfeld (NRW), Germany. Price: €13,500 plus VAT. The lathe is perfectly suited for all types of CNC turning applications and offers excellent cost-effectiveness for workshops and manufacturing companies. Contact: Please send a message for further information or to arrange a viewing appointment. Important information: All information is subject to change, prior sale, errors, and availability. Technical data and all provided information are non-binding and for guidance only. Contact: If interested or to arrange a viewing, please send a message or schedule an appointment. Disclaimer: The item is sold as described. Returns, guarantee, and warranty are excluded. The buyer agrees that the item is purchased "as seen" and without any right of return. No liability is accepted for the accuracy of the information provided in the text or photos. By purchasing this item, you agree to the above terms and conditions.

Condition: used, Year of construction: 2003, Technical details: turning diameter: 720 mm turning length: 2000 mm Lhsdpfx Ajy Tnaxjkujg control: 4110 total power requirement: 40 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 4,5 x 2,3 x 1,9 m turning length: 2000 mm centre height: 345 mm internal taper -metric: 100 mm spindle bore: 92 mm tailstock-quill taper dia.: 100 mm turning diameter over bed: 720 mm

Condition: good (used), Year of construction: 1999, NEF520 year of manufacture 1999 Lhedpey S Eu Refx Akuog

Condition: used, Year of construction: 1994, operating hours: 26,793 h, functionality: fully functional, machine/vehicle number: 054204, turning diameter over cross slide: 520 mm, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 520 mm, swing diameter over cross slide: 290 mm, spindle speed (min.): 2,000 rpm, Lathe Ø520 x 1500 mm. 70mm through-bore and MK5 in the tailstock. Super precise bench. Has had the side rails and spindle in X renovated. Forkardt 315 mm centering chuck with many extra jaws and Multifix quick-change steel holder. Lhedpfxsy Sbh Tj Akuog Nice beginner bench if you want to try your hand at CNC. We have the chip tray and cooling water tank with the pump. It's just not shown in the photo. The control can be set to German, English, Spanish or Italian. I have all the documentation on the machine. The control is Phillips-Grundig and I can possibly help with training. The bench weighs 3,000 kg so we can't load it with a forklift. It has to be picked up by crane truck.

Condition: used, Year of construction: 2001, chucking diameter 250 mm Ledpfjw Syc Iex Akujhg greates pass round over bed 500 mm swing diameter over slide rest 290 mm centre distance 850 / 1350 mm control Heidenhain weight of the machine ca. 2700 t dimensions of the machine ca. 2900 x 1953 x 1825 m

Condition: good (used), Year of construction: 2001, functionality: fully functional, turning diameter over cross slide: 150 mm, spindle bore: 51 mm, turning length: 750 mm, turning diameter: 320 mm, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 10 m/min, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total length: 2,450 mm, total width: 1,668 mm, total height: 1,825 mm, travel distance cross slide: 150 mm, overall weight: 2,000 kg, three-jaw chuck diameter: 200 mm, travel distance Z-axis: 700 mm, Equipment: rotational speed infinitely variable, Machine is still in good working condition and can be inspected under power. Additional options & accessories: Lhjdpfx Ajy Iwhbskujg - Bison 3-jaw chuck Ø200mm - Various MK reducing sleeves - Drill chuck - Original documentation Weight & dimensions: - 2000 kg - 2450 x 1668 x 1825 mm (LxWxH)

Condition: used, Year of construction: 2014, operating hours: 1,760 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 650 mm, spindle bore: 66 mm, spindle speed (max.): 4,500 rpm, rotational speed (max.): 4,500 rpm, swing diameter over cross slide: 380 mm, chuck outer diameter: 210 mm, bar diameter (max.): 66 mm, Equipment: documentation/manual, We offer this used DMG MORI NEF 400 CNC lathe, year of manufacture 2014. type: NEF 400 serial number: 01620009641 year of manufacture: 2014 max spindle speed: 4,500 rpm Hydraulic chuck Swing over cross slide: 380 mm Turning length: 650 mm Siemens ShopTurn 840 D Bar diameter: 66 mm Hydraulic tailstock 12-position turret With chip conveyor Lhedpfx Akjy Iuvceusg Only 1,760 spindle hours If you have any questions or would like more information, please feel free to contact us or give us a call.

Condition: used, Year of construction: 2006, turning diameter 600 mm turning length 1250 mm control Siemens 840D radial face slide travel 320 mm turning speed range 5-3.000 U/min Number of tools 8 St. total power requirement 42 kva Ljdey I A Utspfx Akushg weight of the machine ca. 5,5 t dimensions of the machine ca. 3,6x2,15x1,95 m

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Ljdpfxoyqwb Ee Akujhg Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: defective spare-parts repository (used), Year of construction: 1994, operating hours: 68,921 h, functionality: not functional, spindle bore: 70 mm, turning length: 1,500 mm, turning diameter: 500 mm, swing diameter over cross slide: 290 mm, quill stroke: 180 mm, spindle speed (max.): 2,800 rpm, overall weight: 3,200 kg, Good day, We hereby offer you, without obligation, a used, defective cycle lathe from the manufacturer Gildemeister. Manufacturer: Gildemeister Model: NEF 500 Plus Year of manufacture: 1994 Total operating hours: 68,921 hours Turning diameter: 500 mm Turning length: 1,500 mm Control system: Manual Plus Spindle bore diameter: 70 mm Speed range: 8 – 2,800 rpm Gear stages: 3 Maximum swing diameter over cross slide: 290 mm Spindle nose: DIN 55027 size 8 Tool holder type: C Tailstock quill stroke: 180 mm Machine weight: approx. 3.2 t Dimensions (L x W x H): 3.0 x 1.8 x 1.8 m Note: The above technical data have been taken from the operating manual, manufacturer brochures, or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of supply: 1 used Gildemeister NEF 500 Plus cycle lathe Condition: The cycle lathe is not operational because the control does not power up. The machine can be inspected under power in our workshop, but cannot be put into operation. We are therefore selling the machine as defective. We would be pleased if this machine is of interest to you. Lhsdpfjy Hr U Hex Akujg Your Serviceteam Mertens & Frowein GmbH

Condition: good (used), Year of construction: 1999, functionality: fully functional, Gildemeister NEF 320 / Cycle Lathe, Year of manufacture: 1999, Control: Manual Plus, Lhodpfx Akjy Ev I Ujujg Centre distance: 750 mm, Swing diameter over bed: 320 mm, Spindle speed up to 4,000 rpm, 2 gearbox stages, Multifix toolholder, Tailstock, 2 steadies, Accessories,

Condition: used, Year of construction: 2012, turning diameter 350 mm turning length 650 mm control 840 D SL ShopTurn Siemens greates pass round over bed 385 mm Swing dia. over traverse guideway 350 mm turning speed range - main spindle 0 - 4.500 min/-1 power capacity - main spindel 11,5 / 8 kW max. Torque 340 Nm spindle diameter in front bearing 130 mm spindle bore 87 mm bar material dia. max. 65 mm max. chucking diameter 250 mm spindle head 170 h5 number of toolpositions 12 pos. Shank diameter DIN 69880: 30 mm Number of driven toolspositions 6 pos. Spindle speed - driven tool stations max. 4.500 min -1 power capacity driven tool-stations 5,5 kW x-axis 255 mm z-axis 800 mm tailstock 680 mm taper of center MK 4 clamping capacity 6,8 kN Lhsdpey E Tvvefx Akuog feed speeds 0 - 30.000 mm/min rapid traverse ( X / Y / Z ) 30 / - / 30 m/min Feed force ( X / Y / Z ) 4,5 / - / 6,2 kN total power requirement 28 kW weight of the machine ca. 3,3 t dimensions of the machine ca. 5,0 x 2,5 x 2,3 m CNC Universal Lathe GILDEMEISTER - NEF 400 V3 - C-Axis - Tool-Drive - only ca. 8093h Spindle hours - incl. 1x workbench - incl. 1x tool cabinet - incl. 1x cabinet for VDI tool holders - incl. 8x tool holders - incl. 4x driven tools (2 radial, 2 axial)

Condition: used, Year of construction: 2004, control Heidenhain turning length 1.000 mm turning diameter over bed 500 mm turning dia. over slide 290 mm centre distance 1.500 mm x-axis 260 mm z-axis 1.000 mm spindle bore 70 mm Ledpoy A Tdbsfx Akushg spindle tunring speed 3.000 U/min spindle motor 12 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Year of construction: 2004, Year of manufacture: 2004 Sauter 8-position VDI 20 turret with all stations powered tools Spindle holding brake Interpolating C-axis Reinforced coolant pump 2.3 bar / 28 l/min Control: Heidenhain MANUAL PLUS (cycle control) Monitor: 10.4" TFT VGA color display Working area & capacity Swing diameter: 320 mm (over bed) / 150 mm (over cross slide) Distance between centers: 750 mm Cross travel: 185 mm Spindle bore: 56.6 mm Spindle nose: Size 6 (according to DIN 55027) / Mount MK 6 (AC) Drive power: 9 kW (at 100% duty cycle) Max. torque: 410 Nm Speed range: 20 – 4,000 rpm (2 gear stages) Stage 1: 20 – 1,000 rpm Stage 2: 40 – 4,000 rpm Feed & axes Rapid traverse (X/Z): 8 / 10 m/min Feed speed: 5 m/min Feed force: 300 daN (X) / 600 daN (Z) C-axis: Interpolating (option included) Tool turret & tailstock Ljdpfxey Dckas Akujhg Turret: 8-station disc turret (Sauter), all stations powered Speed for driven tools: Max. 6,000 rpm (3.8 kW) Tooling system: VDI 20 (DIN 69880) Tailstock: Quill diameter 70 mm, stroke 120 mm, MK 5 mount Dimensions & capacities Footprint: approx. 2,600 x 1,915 x 1,730 mm Weight: approx. 2,200 kg Coolant tank: approx. 70 liters Fixed steady rest with rollers, guide diameter 10-115 mm Travelling steady rest with rollers, guide diameter 10-115 mm Three-jaw chuck Schunk Rota Splus 200-52 J 6, high precision Quick-action chuck with lever, SSF 40/6 Ortlieb, collet 173 E Preparation for faceplate operation, includes speed monitoring with separately adjustable speed supervision. Tooling equipment: fixed turning tool holders and driven tool holders Jaws / hard and soft Collets 173 E The machine was used in single-part production for prototype manufacturing. Low spindle running hours Available immediately.

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting Lodpowtct Hjfx Akuohg 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *

Condition: new, Year of construction: 2024, Protective disc made of safety glass for a Gildemeister CTX Beta 500 V4, item unused, new and in original packaging. Lhedpfx Akjyx U Slsuog

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Lhjdpfx Akeyxm Tneujg Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 315357, turning diameter over cross slide: 420 mm, turning length: 1,000 mm, turning diameter: 600 mm, spindle speed (max.): 3,200 rpm, controller model: Eltropilot Heidenhain, TECHNICAL DETAILS Turning length: 1,000 mm Swing diameter over bed cover: 600 mm Swing diameter over cross-slide: 420 mm Travel distance X-axis: 275 mm Travel distance Z-axis: 1,065 mm Main Spindle Speed range: 16 – 3,200 rpm Drive power: 27 kW Max. torque: 800 Nm Spindle diameter at front bearing: 120 mm Spindle bore: 85 mm Chuck diameter: 260 mm Spindle nose: 220H5 Tool Turret Number of tool stations: 12 Tool shank diameter: 40 mm Turret indexing time: 0.8 s Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Tailstock taper: MK 5 Max. quill pressure: 9,500 N Feeds Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 15 m/min Feed force X-direction: 5,000 N Feed force Z-direction: 1,000 N MACHINE DETAILS CNC control: Eltropilot Heidenhain Operating voltage: 400 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 52 kVA Dimensions & Weight Floor space required: approx. 5.5 x 2.5 x 2.1 m Machine weight: approx. 7.5 t Lhsdpfx Akeyxmurousg EQUIPMENT Documentation Chip conveyor Coolant system Tailstock Hydraulic unit Three-jaw chuck (Model: SMW KNCS-N-260-72) Note: An RMS sensor is installed in the machine!

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Lodpfx Akjyyniaoujhg Technical details are shown on picture.

Condition: excellent (used), Year of construction: 2010, operating hours: 3,624 h, functionality: fully functional, travel distance X-axis: 398 mm, travel distance Z-axis: 1,250 mm, rotational speed (max.): 3,000 rpm, We offer in good condition Gildemeister NEF 600 with Heidenhain control, please note customer removes 3-jaw chuck. Machine will be sold without 3-jaw chuck. Lhedsxrg S Iepfx Akusg Technical Data: Turning diameter: 600mm Turning length: 1190mm Main spindle: Speed range – main spindle: 0 – 3,000 rpm Drive power – main spindle: 39.4 / 27.5 kW Max. torque: 430 Nm Spindle diameter at front bearing: 100 mm Spindle bore: 90mm Max. bar diameter: 75mm Turret: Number of tool stations: 12 pos - VDI 40 Travel: X-axis: 398mm Z-axis: 1250mm Tailstock: Tailstock travel: 1150mm

Condition: good (used), Year of construction: 2002, turning diameter over cross slide: 150 mm, spindle bore: 52 mm, turning length: 750 mm, turning diameter: 320 mm, center width: 750 mm, quill stroke: 120 mm, quill diameter: 70 mm, center height: 160 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, total length: 2,800 mm, total width: 1,820 mm, total height: 1,750 mm, spindle motor power: 9,000 W, overall weight: 2,000 kg, NC lathe, control Heidenhain Manualplus 4110, capacity Ø 320 mm, between centers 750 mm, motor 9 kw, spindle speed 20 - 4000 rpm, bore Ø 52 mm, 3- and 4-jaws chucks (6), soft chucks, tool post Multifix + Capto C3 with holders, turning pins, drilling chuck, coolant system, several accessoires in cabinet, manual, YOP 2002, 13'600h, in TOP condition Lhsdpfxsyymx To Akueg