Used Studer Cnc External Cylindrical Grinding Machine for sale (68,442)

Condition: refurbished (used), Year of construction: 2025, Schaudt PS51 S600 - Premium overhauled - Sanding length: 600 mm - Center height: 180 mm - Grinding wheel width: 220 mm (optionally more possible) - Workpiece weight: 200 kg Lhjdjfg Utdepfx Akusg Further freely selectable options: - Completely new control cabinet with Siemens Sinumerik One or Fanuc 0iTF-Plus - Quick set-up via GSN user interface - In process measuring control DMK / LMK - Dressing spindle for diamond form roll - Balancing and grinding sensors - Hydraulic clamping/unclamping of tailstock - Autom. Siemens door drive - Remote maintenance - Conversion to needle nozzles - Suitable coolant / extraction system - Automation preparation - and much more. We can also overhaul your existing storage machine! Schaudt / Studer / Kellenberger / Bahmüller / Voumard / Overbeck / Fortuna / Tacchella and much more.

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Lhjdpfev T Aqgsx Akuog

Year of construction: 1996, condition: ready for operation (used), Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible. Ljdpfoxvdd Asx Akushg

Year of construction: 1999, condition: ready for operation (used), Center height: 175mm, grinding length: 650mm, B-axis: -15°/195°, workpiece speed: 1750rpm, grinding wheels T1/T2: 500mm/400mm, bore: 203mm, max. workpiece weight: 80kg, workhead: MK4, tailstock: MK3. Machine dimensions X/Y/Z: approx. 3000mm/3000mm/2100mm, weight: approx. 4000kg, operating hours: 56300h, control: GE Fanuc Series 16i-T. Documentation available. On-site inspection is possible. Expected to be available from February/March 2025. Lhodpfxouku Syj Akujg

Condition: used, Year of construction: 2008, operating hours: 18,937 h, functionality: fully functional, machine/vehicle number: 67, STUDER S145cnc INTERNAL GRINDING MACHINE Series 65 Year of manufacture: Sep. 2008 Operating hours: 18,937 Ljdpfoyw Nuxox Akushg Price: €118,000 This is a service-recorded machine: it undergoes an annual maintenance check by STUDER, with all wear parts replaced as needed. The machine has been used exclusively for producing precision spindles, achieving tolerances up to max. 0.0003 mm. The machine operates with grinding oil. Initially used in single-shift operation, in the last two years it has been working two shifts. The machine is in use and available for inspection upon request. The machine is being sold due to new equipment acquisition. Extras: Spindle adapters and flanges available upon agreement. Specifications: • Swing diameter ..... 448 mm • Center height ..... 225 mm • Workhead (chuck spindle head) with roller bearings, mounting taper ISO50 – spindle nose Ø110 mm, spindle bore Ø50 mm • Machine bed made from Granitan S103 • Worktable swiveling range: +/-30° • Direct measuring system for X and Z axes • Touch-trigger probe Movomatic C25 (switching) • FANUC CNC control system 21i-TB • Portable control unit Studer PCU terminal with LCD display • Machine is currently in operation • Transport arrangements to be made by the buyer The machine is equipped with 4 spindles: one external spindle, two internal spindles, and one internal spindle with longitudinal positioner. RPM – one spindle: 60,000; two spindles: 42,000; one spindle: 5,000 Type: Fischer

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Lhodpfx Asywfyqekueg

Condition: used, Grinding wheel diameter 300 mm, max. grinding length approx. 600 mm, with coolant system and KNOLL fleece filter unit Ledpfxsy Sqkks Akuehg

Condition: like new (used), Year of construction: 2019, functionality: fully functional, Lizzini IG-FL in as-new condition: - Year of manufacture: 2019 - Siemens control system Ledoy Em Tnopfx Akuehg - 2 external grinding wheels - 1 internal grinding spindle - C-axis - CNC-controlled B-axis Suitable for capto grinding (non-cylindrical/irregular shapes) Centre distance: 1000 mm Centre height: 200 mm

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: OE-70109, grinding wheel diameter: 760 mm, grinding spindle speed: 2,200 rpm, workpiece spindle speed (max.): 500 rpm, clamping length: 2,600 mm, tailstock quill stroke: 60 mm, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within one of the following periods: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Maximum grinding spindle speed: 2,200 rpm Workpiece spindle speed: 20–500 rpm Maximum workpiece swing diameter: 850 mm Maximum clamping length: 2,600 mm Maximum workpiece weight: 500 kg Maximum grinding wheel diameter: 760 mm Grinding wheel bore diameter: 304.8 mm Peripheral speed: 45 m/s Workpiece spindle mount: Morse taper 6 Tailstock quill stroke: 60 mm Grinding spindle head: X-axis infeed Z-axis feed MACHINE DETAILS Control model: FANUC SERIES OI-TF Operating voltage: 400 V Frequency: 50 Hz Lhodpfxeym Axnj Akuog Rated current: 3 x 100 A Connection: 63 kVA Dimensions & Weight Dimensions (L x W x H): 5,000 x 4,500 x 2,900 mm Machine weight: 9,000 kg EQUIPMENT XACTOOLS manufacturer's robot cell with loading unit EPSON industrial robot, maximum payload: 8 kg Vibratory bowls Documentation External reference: Lot 35 / Blickle

Condition: good (used), Year of construction: 2000, Universal Cylindrical Grinding Machine Studer S30 leanPRO Studer S 30 Year of manufacture: 2000 Operating hours counter Regular maintenance intervals by manufacturer (last service 11/25, report available) Wheel change: according to manufacturer intervals Hydraulic inspection: annual check Backup battery replacement: included in Studer maintenance Control system: FANUC 16 T Grinding diameter: 350 mm Grinding length: 1000 mm Center height: 125 mm Distance between centers: 650 mm Optional grinding cycles for increased center height Table adjustment: 11° Glass scale on X / Z axis Paper band filter unit Workpiece headstock: approx. 1-1,000 rpm Internal grinding attachment with accessories LED spotlight with flexible arm Grinding wheel: 400x80 mm Frequency converter for external grinding spindle Grinding wheel flange Bore diameter: 127 mm Frequency converter for internal grinding spindle Workpiece weight: approx. 80 kg Workpiece support with live center and MK 4 Workpiece headstock: MK 5 taper Tailstock: MK 3 taper Quill stroke: 40 mm Machine weight: approx. 3,400 kg Installation dimensions (LxW): 2,300x1,550 mm Machine height: approx. 2,000 mm Electrical supply Digital linear measurement system Coolant supply with fleece filter, tank capacity 300L Lhodpeyx Hgzsfx Akujg Operating hours counter, control ON: 35,978 h

Condition: ready for operation (used), Year of construction: 1983, functionality: fully functional, machine/vehicle number: 8151, rotary table diameter: 800 mm, grinding height: 750 mm, workpiece weight (max.): 800 kg, total height: 4,100 mm, total width: 26,650 mm, total length: 44,000 mm, feed length Y-axis: 750 mm, feed length Z-axis: 550 mm, overall weight: 13,000 kg, grinding wheel diameter: 400 mm, disc diameter: 400 mm, grinding spindle speed: 1,460 rpm, grinding diameter: 800 mm, control cabinet width: 650 mm, type of input current: DC, control cabinet height: 1,900 mm, control cabinet length: 1,800 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,460 rpm, table load: 900 kg, workpiece diameter (max.): 850 mm, grinding wheel width: 60 mm, table width: 1,240 mm, power: 35 kW (47.59 HP), rapid traverse X-axis: 2 m/min, rapid traverse Y-axis: 100 m/min, rapid traverse Z-axis: 2 m/min, space requirement height: 4,100 mm, space requirement length: 5,100 mm, space requirement width: 2,655 mm, Good day, For sale is a well-preserved and completely functional Sielemann cylindrical grinding machine for the following applications: surface grinding, internal grinding and external grinding. The machine has a swivel stand with 3 different sanding heads for the respective area of application. Complete machine documentation is available and can be presented upon inspection. The Sielemann offered here has always been serviced and maintained, most recently the components listed below were replaced: - 3x New weight compensation cylinders - 1x new hydraulic unit (complete) - New guideway covers - Revised rotary table group Technical data Machine length: 4.400mm Machine width: 2,655mm Machine height: 4.100mm Machine weight: 13.000Kg Control cabinet width: 650mm Control cabinet height: 1.900mm Control cabinet length: 1.800mm Grinding table diameter: 800mm Grinding table load capacity: 800kg Grinding table drive power: 0.21 - 14.5KW Grinding table speed: 100 1/min (both directions) Grinding table workpiece clamping: Magnetic clamping plate incl. T-slots Z-axis travel (grinding table): 550mm Maximum grinding height (Y): 750mm Lubrication pump Masch. Bed: 0,18KW Lubrication pump Masch. Column: 0,1KW Leak oil pump: 0,065KW Hydraulic pump: 1.5KW 1) External round grinding head Spindle drive power: 11KW Spindle speed: 1,450 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min 2) Internal round grinding head Spindle drive power: 5.5KW Grinding wheel: Variable Feed speed (Y): 100 mm/min 3) Flat-round sanding head Spindle drive power: 11KW Spindle speed: 1,800 1/min Grinding wheel: 400x50mm Cone grinding spindle mount: D=65mm Taper pitch: 1:5 Feed speed (Y): 100 mm/min Lhodorntirjpfx Akusg Viewing appointments possible at short notice by arrangement !!! With kind regards R.Suckow / Managing Director UNITTOOL Werkzeugmaschinen GmbH 33758 Schloß Holte Stukenbrock Görlitzerstraße 9

Condition: like new (used), Year of construction: 2023, operating hours: 200 h, functionality: fully functional, center height: 175 mm, center width: 650 mm, The machine was accepted by Studer and has never been put into operation. Lsdpfx Ajyttcqekuehg

Condition: refurbished (used), Year of construction: 2025, Studer S30 Center height: 125 mm center width: 650 mm Workpiece weight: 80 kg Other freely selectable options: - Completely new control cabinet with SPS-Basic and panel - Conversion to ball screw incl. SPS-Pro (cycle controlled) - "Workpiece memory"-SPS-PRO for 10/15/30/50 workpieces - Glass scale in X- and Z-axis Lhodpfxsd Hdxwj Akuog - Swiveling internal grinding device - Motor spindle for internal grinding device - Frequency converter external grinding spindle - Frequency converter for internal grinding spindle - Grinding sensor system - Contact protection on external grinding spindle - Safety door - manually operated - Grinding wheel flange - LED spot with flex arm - suitable coolant system

Year of construction: 2014, condition: ready for operation (used), A Karstens cylindrical grinding machine from 1992, which was completely overhauled and modernized in 2014, is available. Center width: 1000mm, center height: 180mm, grinding diameter: 360mm, max. workpiece weight center/flying: 250kg/70kg, grinding wheel diameter: 400mm. Spindle holder: MK4, speed: 450rpm, swivel range: 90°, quill holder: MK4, quill stroke: 45mm, quill force: 600N. Table swivel: 10°, infeed spindle: 80mm, rapid traverse: 50mm, coarse adjustment: 280mm, weight: approx. 3800kg. Including 3x centering points and grinding wheels as good as new. Documentation available. On-site inspection is possible. Lhsdpfx Ajv Suftokusg

Year of construction: 1958, condition: ready for operation (used), Grinding length: 1500mm, center height: 175mm, max. workpiece diameter: 350mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm. Machine dimensions X/Y/Z: approx. 3600mm/1900mm/1900mm, weight: approx. 4000kg. Documentation available. An on-site inspection is possible. Ledpfx Akeyg Nvmjuehg

Condition: used, Year of construction: 1965, There are two WMW SU 315x3000 available, connected load machine 1/ 2: 12.6/ 12kW, weight machine 1/ 2: 8.2/ 9t, machines need overhauling. Lsdjxg Ihgopfx Akushg

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Lhedox Uq T Dspfx Akueg

Condition: good (used), Year of construction: 1990, CNC Cylindrical Grinding Machine Make: TSCHUDIN Type: HTG 22 - 862 Year 1990 Ledpfx Aksid Aphjuehg with MARPOSS E14 control and measuring control E5. center width : 650 mm center height : 100 mm grinding length : 620 mm Weight : ca.4 500 Kg. Further data See : TECHNICAL DATA SHEET With many grinding stones and holders Complete machine documentation available. Machine in stock.

Condition: new, Year of construction: 2024, functionality: fully functional, Universal CNC cylindrical grinding machine for high-precision internal & external cylindrical grinding MBF 453U from the MaiBase platform The machine is a completely new development with strong dimensions in a small space! Technical data: Center width: 430 mm Standard center height: 200 mm Grinding length: 400 mm Lhjdpfxetrf Smo Akuog Grinding wheel diameter: 500 mm Z-axis adjustment path: 550 mm X-axis travel: 385 mm Dimensions and weight: 2200 x 2500 x 2400 mm // 6500 kg Equipment of the machine: - FANUC Oi-F Plus control system - Grinding headstock (swiveling) with 15kW motor spindle - Workpiece headstock MK5 - Tailstock MK3 with 20 mm stroke (optional 60 mm / 120 mm) - Handwheel for manual axis movement - Z-axis - X-axis - C-axis - B-axis - Glass scales for X- and Z-axis - Internal grinding spindle FISCHER UJ80 - Internal grinding spindle (GMN motor spindle) optional - Dressing spindle attached to the workpiece headstock for rotary dressing - Automatic door drive

Condition: refurbished (used), Year of construction: 2026, Manufacturer: TSCHUDIN Machine type: SL 105U Year of construction: 2024 Workpiece headstock: MK6 Tailstock: MK4 Center height: 175 mm Center width: 1000 mm Grinding length: 1000 mm Control: Siemens 840D SL Space requirement of the machine: 4920x3400x2300 Lhodpfjd Adfuox Akuog

Condition: excellent (used), Center height 300 mm Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm With DRO With measuring control MARPOSS Lsdpfetpgnhjx Akuehg Misc.accessories MARCELS MASCHINEN AG

Condition: ready for operation (used), Year of construction: 1981, functionality: fully functional, grinding length: 2,500 mm, grinding wheel diameter: 600 mm, grinding diameter: 450 mm, workpiece length between centers: 2,500 mm, grinding wheel width: 80 mm, No minimum price – guaranteed sale to the highest bidder! The machine was overhauled in 2025. The following work was carried out: Inspection of the lubrication system and the hydraulic system Geometric alignment of all axes by grinding the table and scraping the guides Replacement of the bearings Inspection of the spindle housing for the workpiece Inspection of the spindle housing for the grinding tool Inspection of the electrical system (conversion from fuse links to new circuit breakers) Installation of a central emergency stop button in the control panel Installation of work area lighting Cleaning of the machine Replacement of the guide covers Installation of a digital axis display for the X-axis Overhaul of the cooling system Honing and replacement of the seals in the cylinder Repair of the valve block TECHNICAL DETAILS Grinding length: 2,500 mm Grinding wheel diameter: 600 mm Grinding diameter: 450 mm Distance between centers: 2,500 mm Workpiece diameter between centers: 450 mm Workpiece length between centers: 2,500 mm Grinding wheel width: 80 mm Feed length Y-axis: 450 mm Feed length Z-axis: 2,700 mm Arbor diameter: 305 mm Lhsdpjy Sx Iqofx Akujg EQUIPMENT Balancing device for grinding wheels 2 tailstocks Truing device Complete DTR documentation 2 grinding wheels: T1 600x80x305 A98 46K 9V/40 34527331

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Lsdpfx Aoywftkokujhg

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Lsdpfx Aeywftdekujhg

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Lhedpfsrtrzpsx Akuog Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L