Offset printing press

MAN ROLAND 304 P

Condition: good (used), Year of construction: 2023, functionality: fully functional, Tiger 125 Premium, DOM: 04/2023, installed 02/2024, processed approx. 100,000 m2 of thermal plates. Fully functional and ready for transport. Off-white processor for thermal/conventional applications * Touch screen control panel (GNUCII) with full functionality * Developer configured for thermal applications (2 x brush) * Developer fill pump * Developer conductivity monitor * Drip tray * Developer filter (50 micron woven 10”) * Recirculating (water-saving) water rinse with 1 x brush / Gum / Drying unit Hjdpfjxg Hynox Afcei * Container level sensor probes (alerts for full/empty), 3 sensors Integrated cooling solution Integrated option to configure for either tap water or water-saving mode Optional interfaces for most CtPs G&J Remote Enabling and WebConnect service tools Single phase power connection (worldwide) incl. power cord Day-to-day delivery on ECO-friendly open pallet and plastic wrapping The processor is worldwide electrically configurable and complies with CE/UL requirements

Condition: used, Year of construction: 2002, Offset 5 color Roland 505/OB Year: 2002 Number of impressions (mio): 126 Machine control - RCI JobCard Feeder - Suction feeder table Hodpfsxtadaox Afcji - Steel plate in feeder Printing units - Number of printing unit(s): 5 - Straight machine - RolandMatic - SAPC Semi Automatic Plate Change - Automatic inking roller washing device - Automatic blanket washing device - Automatic impression cylinder washing device - Cooling system: Technotrans - Ink temperature control Delivery - Non-Stop delivery: prepared - Powder spray

Condition: used, Year of construction: 1999, Format: 370 x 520 mm Equipment: Two colours Straight machine Alcolor Automatic film dampening Autoplate: semi-automatic plate change system Cptronic , Chromed cylinders Blankets wash-up device - Wash device for impressi Ink-rollers wash device managed from console Powder spray, Cooling unit Plusversion All manuals, tools, accessories Technical details: Maximum sheet size: 370 x 520 m Hodpfx Asyf Iicjfcoi Paper thickness range: 0,03 - 0,5 mm - Max. speed plate bender

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Hodpfxerllhkj Afcoi Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Faster than the equivalent sliding-table press, the fixed-table Printmaster is perfect for medium and long production runs, delivering excellent quality results with virtually any material up to 4 mm thick. And because the machine prints incredibly fast, the Printmaster is undoubtedly the best on the market. Among its many sophisticated features is the patented dual gripper system that ensures perfect registration and quiet operation. The Printmaster can also be equipped with various optional systems and accessories that make it even more versatile, faster and easier to use. Integrated PLC control system. Independent LCD touch panel with setting and monitoring of printing parameters: Hedpfjuptf Ajx Afcei - Job parameter storage system. - settings diagnostics. - Variable stroke lengths of scraper and flood coater. - Adjustable clamp, scraper and flood coater speeds. Motorized off-axis contact adjustment. Hardened, self-balancing stop points combined with "locking" fingers for material control. Maintenance-free toothed belt drive for the scraper carriage. Double gripper bar shuttle system. Folding feed table. Fiber-optic registration control. Prepared for the addition of a feeder. High-strength steel lifting columns. Anodized aluminum work surface. Printing frame insertion. Multi-purpose self-adapting clamps. Pneumatic scraper pressure equalizer. Pneumatic scraper and flood coater changeover. Pneumatic clamping of printing frame and back bars. Horizontal flooding. Choice of flooding: immediate or delayed. Timer for machine stop to allow peeling action. Adjustable peeling at 6 levels. Adjustable blowing system. Foot pedal.

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Hjdpfx Aovy Aipjfcei Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: good (used), Year of construction: 1997, functionality: fully functional, - Manufacturer: SPS - Model: Vitessa Star G2 - Machine type: screen printing machine - Year of manufacture: 1997 Hsdpfxjxby Sme Afcsi - Equipment: • Mabeg feeder, model MS • SPS dryer, type UV Top 1200, year 1993 • SPS Rehmus stacking unit, type Autostack S-02, year 1993 • Steel platform and tread plate on pallets • Control cabinet • Screen printing frames - Area of application: industrial screen printing, packaging, labels, special applications

Condition: ready for operation (used), Year of construction: 1984, functionality: fully functional, Machine for making paper bags with square bottom Bag width: 45 mm - 125 mm Tube length: 150 mm - 340 mm Gusset: 30 mm - 75 mm Photocell Max reel width: 400 mm In-line 4-color flexo printing unit Hodpjw Nvi Sjfx Afcji

Condition: ready for operation (used), Year of construction: 2000, Man-Roland 504 F 130 MIOS Air center Densitometer Year: 2000 Colours: 4 Hodsyc I Iyjpfx Afcsi Max thickness: 1 mm Autoplate Autowash Diagonal register Straight machine Rietschle Air Center Tachnotrans Alpha D Weko Powder AP 250 No damages on gears or cylinders In production

Condition: good (used), Year of construction: 2013, Machine Summary Compact, proven digital plate imager for label & narrow-web plate facilities. Handles a wide range of materials (digital flexo, chemistry-free films, digital letterpress on film/metal base, and screen) in the popular 24″×20″ (609×508 mm) format. Equipped with EasyClamp for quick, convenient loading onto the vacuum drum. Technical Data (from seller’s dossier) • Model: Esko CDI Spark 2420 — Optics 7.5 • Maximum plate size: 609 × 508 mm (24″ × 20″) Hsdpfxow Tc Tfs Afcei • Power supply: 220–240 V, 1/N/PE, 6 A, 50/60 Hz • Machine dimensions (W×D×H): 1160 × 700 × 1050 mm | Weight: ~320 kg • Serial number: 107199 | Year of manufacture: 2013 • Equipment/Features: EasyClamp vacuum drum loading Condition & Viewing • From a company closure; machines were in active use until closure and can be demonstrated in operation by arrangement.