Offset printing press

MAN Roland 305 SW

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, color channels: 4, paper width (max.): 74 mm, paper height (max.): 53 mm, Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Current State: In production Colors: 4 Impress.Count: 68 mio Extras: | Perfector | Touch-screen Control | Autosize Age: 2004 Max.Size: 74 x 53 cm (29 x 20 inch) Colors: 4 Impress.Count: 68 mio Extras: - Perfector - Digital Controls - Autosize Description: Man-Roland 304 Year: 2004 Imp count: 68 mil Colours: 4/0 or 2/2 Autosize Quick action plate clamp No diagonal register Tedpfx Agexnl E Sjcef Technotrans aplha.d 40L Available immediately In production Located: Europe Eastern Available: Immediately Price: On Request Important: Very good condition Located: Europe Eastern Current State: In production Available: 10-2025 Price: On Request

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Automatic Sheet Feeder A-20 (A-3): Mabeg Suction Head, Double Sheet Control Laminating Unit EK 104 (A-EK-3): Waterbased & Thermal Automatic Sheet Seperator TM-104 (TM-3) Seperating Unit: Quadruple Round Knife, Perforating Device Powder Spray Removal Device Automatic Stacker S-3 Todpfxjrp D I Is Agcof Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: good (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: FP-201610-09, product width (max.): 1,000 mm, working width: 960 mm, product height (max.): 4 mm, roll width: 1,000 mm, roll diameter: 1,500 mm, 4 color flexo print machine made in Korea, used for paper cup printing; Max speed 100m/min Max cardboard width - 1000mm Including: 1) 7 sets of print cylinders, total 28 cylinders 2) 8 aniloxes 3) Printing plate mount table with two cameras 4) Printing plate storage table Tsdpfx Ajvkp Dnjgcef

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Automatic Sheet Feeder A-4: Mabeg Suction Head, Double Sheet Control Laminating Unit EK-HL-4: Waterbased & Thermal Automatic Sheet Seperator UTM-4 Tjdpfx Aerp D Nlegcjf Seperating Unit: Quadruple Round Knife, Perforating Device, Hot Knife Powder Spray Removal Device GK-4 Automatic Stacker S-3 Airjet-Dryer Max. Sheet Size X : 1040 mm Max. Sheet Size Y : 1420 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 70-100 m/min

Condition: reconditioned (used), Year of construction: 1999, functionality: fully functional, Fully overhauled Tjdpferiui Tjx Agcsf

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 • YEAR : 2000 • WORK : 46.516 Hours DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Tedpfx Agjvm Ab Eecsf Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, overall weight: 2,000 kg, total length: 4,000 mm, total width: 3,000 mm, total height: 1,500 mm, Slitter Rewinder, can be used with a contact roller rewinding system or as a standard non-contact rewinder, depending on the substrate and required web tension. - In use until 2000, then comprehensively modernized - Modified electrical control equipment with Siemens S7 PLC - Modified winding drives with Commander SE CT control, both individually adjustable - Reversible drive direction for winding drives - Working width 650 mm with BST edge guiding, 700 mm without BST edge guiding - BST edge guiding with pneumatic detection - Max. rewind diameter 500 mm; 2 pcs. 3" rewind shafts - Max. unwind diameter 1000 mm; 1 pc. 3" unwind shaft - Pneumatically controlled unwind brake - Slitting system: circular knives (3 units available) - Running metre counter Hengstler - Main drive, electrically adjustable speed - Machine speed 150 m/min (200 m/min) - Display of winding tension in % - Software file for Siemens S7 PLC available - Parameter file for drive control available - Power supply 3 x 400 VAC / 25 A / 3P+N+GND - Compressed air 6 bar - Suitable for paper, film, aluminium etc. - Required space at least 4 x 3 m - Machine is dismantled and ready for shipment Todsxbyf Hjpfx Agcef - Sale as seen - Packaging: • on wooden pallets - Delivery: EXW Switzerland CH-9008 St. Gallen - Dimensions of unwinder (without slitting unit): • Width: 170 cm • Length: 220 cm • Height: 110 cm • Weight: 490 kg - Dimensions of slitting unit (without unwinder): • Width: 230 cm • Length: 140 cm • Height: 140 cm • Weight: 1490 kg - Control panel (including accessories): • Width: 70 cm • Length: 120 cm • Height: 120 cm • Weight: 240 kg

Condition: as good as new (ex-display), Year of construction: 2019, operating hours: 50 h, functionality: fully functional, machine/vehicle number: 19101105, roller width: 1,100 mm, Equipment: full service history, type plate available, The SDFM-1100 roll-to-roll laminator is a multifunctional laminating machine. It is designed for cold and hot laminating. The paper is laminated on one side with the foil. Then the web is re-rolled onto the roll. For cold laminating, the foil is coated with a water-based glue and dried using a heating roller with a warm air drying system. The winding system sends the paper to the laminating section, where the paper is covered with the foil by heating and roller pressure. The rollers use a heated water circulation system with constant temperature control. The paper roll is held by pins, which are controlled by a pneumatic brake. The paper is unrolled to the leveler, which is equipped with automatic leveling of the paper web before laminating, which ensures even coverage of the web with foil. In the laminator, the non-adhesive film is coated with a water-based adhesive and then dried with a heating cylinder or the film already coated with adhesive is unrolled into the laminating cylinder. The laminating cylinder is heated using induction heaters. Under the laminating cylinder, the paper is joined to the film using temperature and pressure generated by the lower rubber roller, which presses the film with the paper against the laminating cylinder. The laminated web is wound onto a core on a shaft in the receiving section, after which it can be transported to subsequent production processes. Specification SDFM-1100 Maximum roll width 1100 mm Tjdpfovy Aipsx Agcef Maximum roll diameter 1100 mm Paper weight 80 - 500 g/m2 Film thickness 10-50 microns Working speed 10 - 65 m/min Electrical voltage 380V 50Hz Total power 78 kW Maximum power consumption 30 kW Total weight 8000 kg Machine dimensions 10130×2130×2960 mm

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: vec1206-L-1809RO1, input voltage: 400 V, total length: 7,000 mm, total width: 7,000 mm, total height: 2,000 mm, compressed air connection: 6 bar, type of input current: three-phase, year of last overhaul: 2024, overall weight: 2,000 kg, input current: 11 A, mount diameter: 7,000 mm, loading space length: 7,000 mm, loading space width: 3,000 mm, loading space height: 2,000 mm, Laminated steel frame. safety bars for each print head and loading/unloading station. - Safety barrier to prevent operators from entering the stations during work -FOOT PEDAL (print order) -SERVOINDEXATOR-Precise pallet position control +/- .001". Ensures smooth indexing with superior print consistency -Increase production with precise control of acceleration and deceleration direction index: right and left -Programmed with Step-Back, Multi Step-Back and Cycle indexing options -Adjustment of the carousel stroke in both directions -15" TOUCHSCREEN with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View number of prints in real time, speed (pcs/hour) Save all parameters of a stored job: indexer speed, head speed of printing, printing area, number of strokes, time and temperature flash polymerization, color design Setting the preheating temperature of the pallets Quick setting at the same print speed and distance for all heads -Electrically operated PRINT HEADS-10 stations, 6 colors, 4 intermediate flashes, 12 pallets -VERY USEFUL for printing with water-based ink (automatic screen flooding system with ink after printing) - adjusting the screens (templates) with maximum precision in 3 points (front-back, left-right, rotational movement) -adjusting the distance between the pallet and the screen giving you the flexibility to print practically any ink on any substrate at the touch of a button - independent adjustment of the angle of the scraper and counter-scraper, with possible adjustments do with one hand - INTERMEDIATE FLASHS - RAPID WAVE QUARTZ QUARTZ FLASH 51cmX53cm (12 lamps) maximum coverage area Each of them is divided into 3 separate areas (front, middle, back) that can be used depending of the print size: area one, area two, area three, each two/all three CONFIGURED FOR THE POSSIBILITY OF INTERMEDIATE DRYING AFTER EACH PRINT: PRINT/FLASH/PRINT/PRINT/FLASH/PRINT/FLASH/PRINT/FLASH/PRINT/FLA SH/PRINT (POLYCROMY AC-powered printheads enhance finesse, speed and power Front and rear travel adjustment One-handed tool-free squeegee/flood bar lock for quick and easy charging and changing 15" touch screen with Aries 2 operating system Easy operator access to all machine parameters Program multiple heads simultaneously Full speed control in both directions of travel View real-time number of prints (dozen) and speed (pcs/hour) Save all parameters of a stored job: non-contact, indexer speed, indexer speed, printhead speed, print area, number of strokes, flash curing time and temperature, color design, mode Tedpfx Aevccqxsgcsf Set the pallet preheat temperature Quickly set the same print speed and distance for all heads Print heads AC electric print heads for a stronger and smoother stroke Press the button at the loading/unloading stations to prevent printing on empty pallets Adjustable side supports for low-profile screens for easy access True three-point micro-registration (front to back, left to right and roll motion)

Condition: good (used), Year of construction: 2002, machine/vehicle number: 0102002, Semi-automatic angle opening Tjdpferllhksx Agcsf Very good condition 3 months functional guarantee Print format: 1000 mm x 1500 mm max. sheet size: 1050 mm x 1550 mm max. screen frame: 1370 mm x 1850 mm Squeegee pre-squeegee height adjustment: 40 mm Squeegee angle adjustment stepless: + / - 50 - 90 ° Support bar height adjustment: 0 - 100 mm stepless Maximum material thickness: 100 mm Machine weight: approx. 1500 kg connected load: 400Volt/50HZ - 5KW Air connection: 6 bar options: pneumatic screen frame clamping Squeegee pressure compensation adjustable via pressure regulator Stainless steel pressure plate Blowing air device All data without guarantee