Offset printing press

manroland R 202 E 0B

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, Machine is in very good working condition. Still in production. Test possible at any time. Available immediately. Dcedpsyux Sgofx Aiiop

Year of construction: 2017, condition: used, Case maker Kolbus DA 270 Bookjet Edition Year: 2017 Equipped with: - Copilot system with touchscreen - Board magazine for manual loading - Cloth feeder for non-stop operation with pile magazine, max. stacking height 160 mm - Miss cloth control during the separation process - Counter stacker delivery with following roller conveyor - Moveable gluing station for processing hot-glue with glue preparation unit in the premelter, heated glue application roller and scraper roller - Cloth cylinder with grippers and exchangeable plates for rubber pad (incl. 5 x 500 mm, 5 x 720 mm and 10 x rubber pad) - Viscosity control device for automatic water supply to ensure constant glue viscosity with pump and water tank for manual filling - Device for inside lining with hot-glue - Pressing roller device for crease-free connection of the cover material with boards and spine strip - Device for producing padded cases - Automatic case counter - Programmable automatic settings, motorized adjustments, indication of production faults - Single case request for control purposes done from the operating side - Servo-controlled drive technology based on Siemens SIMOTION D Special equipment: - without centre strip roll device (optional available new!) - With board centre strip magazine, boards height min. 130 mm - Board centre strip cutting device (cross centre strip) for processing digital print products of varying centre-strip, device for cutting rigid centre board strips to width, with possible width variation from cycle to cycle - Kolbus Turning Device WE 260, year 2017 (counter: only approx. 4,7 mio. book cases) Technical specifications: - Mechanical speed: up to 65 cycles/min - Open cover size max.: 670 x 390 mm - Open cover size min.: 205 x 140 mm - Joint width: 4 - 15 mm - Spine width: 14 - 120 mm - Turn in width closed: 8 - 15 mm - Cloth width: 223 - 708 mm - Cloth height: 130 - 428 mm Dcjdpfxozhwu Eo Aiiep - Board thickness: 1 - 4 mm - Board width: 95 - 328 mm - Board height: 140 - 390 mm - Board centre strip thickness: 1 - 4 mm - Board centre strip width: 6 - 90 mm

Condition: used, Year of construction: 2007, Perfect binding line Wohlenberg City E-6000 (edition 6000) Year: 2007 Consisting of Book block feeder Solema Fastbook Gathering machine Wohlenberg Sprinter E Description: - Hand feeding station - Number of gathering stations: 16 - Optical sheet control: WST - Opticontrol OSC 1-1 - Winjector vacuum system - Set up element - Criss cross delivery - Transfer into the binder Perfect binder Wohlenberg City E-6000 (edition 6000) Description: - TFT touch screen - Number of clamps: 15 - Milling and roughening station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Front cutter: VSS - Hotmelt spine glue unit with integrated pre-melter - Hotmelt side glue unit with integrated pre-melter - PUR spine gluing unit - Rotary cover feeder - Scoring station - First nipping and pressing station - Second nipping and pressing station - Lay down device (to the left) Transport system Description: - Transport system, length (approx): 50 mtr - Escape delivery Three knife trimmer Müller Martini Merit S Year: 1997 Description: Dedoy Tvyyepfx Aiiecp - Right hand infeed - Automatic hopper feeder for inline production - Sets of knives: 2 - Exchangeable cutting tables (standard set): 4-17 Book stacker Rima RS-3310S Year: 2007 - Delivery to the right

Condition: used, Year of construction: 2000, Format: 0x0 Equipment: Automated Plate Change (S-APC) Olivermatic dampening system Washing systems: Automatic blanket and ink roller washing systems Dcsdpfs Adtmtjx Aiijp Stop action: Electronic stop action perfecting 2/0 - 1/1

Condition: excellent (used), Year of construction: 2010, KOMORI LITHRONE S-529 M C 66 million Year: 2010 Max. sheet size: 530 x 750 mm Max. print area: 520 x 736 mm Min. sheet size: 200 x 360 mm Substrate thickness range: 0.04 – 0.8 mm Max. production speed: 16,000 sheets/h *PQC-S remote control system (Quality Control System) for printing ▪️Remote ink control ▪️Remote dampening control ▪️Remote register control *KHS-AI® computer-controlled machine management system ▪️Intelligent inking system ▪️Machine self-diagnostic function ▪️Advanced CIP4-based information flow management ▪️Module for connection to a scanning unit * Touchscreen monitoring * High-Speed-Start system * Densitometric scanning unit * Automatic blanket cylinder washing * Automatic inking unit washing (dual nozzles for solvents and water) * Automatic impression cylinder washing * Remote substrate thickness adjustment from the control console * Remote substrate format adjustment from the control console * Semi-APC (Semi-Automatic Plate Change) system * Stream feeder with an 800 mm pile height * Feeder head equipped with lifting suckers (2x) and forwarding suckers (2x) * Deionizing air blast at the feeder head * Side air blasts * Pile support table for manual pile preparation * Table • Stream feeder with additional suction tapes * Electronic feed control * Electronic front-lay (register mark) control * Skew control via front-lay bar * Optoelectronic sheet-flow monitoring from the feed pile * Ultrasonic double-sheet detection (ULTRASONIC) * High-precision impression cylinders * Reduced number of transfer cylinders * Solid-construction transfer cylinders * Accessible plate cylinder * Accessible blanket cylinder * Chrome-plated impression cylinder * Cylinder designed for high-load/heavy-duty applications * Diamond-coated transfer grippers * Precision ink-feed adjustment (500-step ink-fountain key opening) * Inking unit featuring 19 rollers, including 4 oscillating/distributing rollers * Anti-ghosting roller (B and D positions) * Independent drive for the ink-fountain roller (ductor) * Adjustable ductor dwell time * Remote control of ink zones via the PQC-S console * Option to disengage the inking unit on the first or fifth printing unit KOMORIMATIC Dampening System * Dampening system suitable for both alcohol-based and alcohol-free printing * Oscillating roller for uniform dampening solution distribution, preventing ghosting and streaking * Rotational speed reduction • Continuous cleaning of the printing cylinder (or flat cylinder surface) based on the type of soiling * Integrated sensor * Pneumatic engagement and disengagement of rollers, controlled from the operator console * High-pile delivery (stack height: 900 mm) * Sheet decurler * Deionizing bar * Automatic lubrication for delivery chains * GRAFIX powder spray system o Automatic adjustment for printing speed o Automatic format compensation * Engagement and disengagement of dampening rollers * Engagement and disengagement of inking rollers Dedpfx Aio Ah Sbxjijcp Coating unit with TRESU chambered doctor blade system o Suitable for water-based and UV coatings o Remote register adjustment: ▪️ Lateral ▪️ Circumferential ▪️ Diagonal (adjusted at the transfer cylinder) o Remote adjustment for substrate thickness o Extended delivery: 2,000 mm o Special gripper bars – shadow-free (prepared for the installation of UV dryers) o Designed for tool-free mounting of rubber or photopolymer plates * Chambered doctor blade system

Condition: good (used), Year of construction: 2007, functionality: fully functional, Heidelberg PM 74 – 2 - 2007 Year : 2007 Imp. Count : only 17 mio imp. 2 colors offset press of size 52 x 74 cm Equipped with : • AUTOPLATE (automatic plate change) • ALCOLOR dampening • Baldwin refrigeration • Automatic blanket and rollers washers • Weko T6 Powder Spray • Double sheet detector • Speed 13.000 Sheet Per Hour • Plate Punch and Plate Bender STRAIGHT MACHINE – NO PERFECTOR Machine can be seen in production – available immediately Dedoz D Dr Tspfx Aiiecp