Universal machining center

Matec 30HV

Condition: excellent (used), Year of construction: 2013, operating hours: 10,370 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, controller model: 530, coolant supply: 20 bar, Matec 5 axes Iedpfxeyuuz Rj Agdeap Rotary table, speed 8 rpm

Condition: defective spare-parts repository (used), Year of construction: 2004, functionality: limited functionality, machine/vehicle number: 662, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, For sale: MATEC 30HV Universal Machining Center (travelling column design) sold as defective – ideal for spare parts or complete refurbishment. Accessories: Chip conveyor and paper-band filtration system included. Known defects (service report 23/04/2025): - Motor spindle bearing damage, 0.56 mm run-out error on 300 mm arbor → replacement required. - Hirth swivel head/spindle housing geometry error, approx. 0.1 mm backlash in worm gear → replacement required. - Y-axis error 40 "motion monitoring" (motor/motor encoder cable/axis module). - Emergency-stop relay -0K2 defective (conversion to Schmersal SRB 324 ST-24V required). Technical data (typical 30HV, non-binding): Travel approx. X 3000 / Y 600 / Z 800 mm, SK40, swivel head, tool magazine, travelling column design. (Please verify all specifications on site.) Isdpfx Agoyuitnjdsap Way covers/bellows in very good condition. Since this is a used item, no warranty can be offered.

Condition: used, Year of construction: 2004, x-travel 3.000 mm y-travel 1.000 mm z-travel 1.000 mm surface area 1.035 x 3.500 mm control Heidenhain 530i round table Ø500 mm / 360° mm/° NC swivel head +/-90 ° spindle tunring speed 9.000 U/min tool taper SK 40 number of tool places 48 Pos. auto power on hours ca. 27.834 h spindle hours ca. 12.357 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Iaedpfx Agsxx A Ncedsp Technical features & accessories: - NC swivel head - Rotary table - Wireless probe - Direct linear encoder - Internal coolant supply 40 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, controller model: Heidenhain 426/430, rotational speed (max.): 9,000 rpm, spindle speed (max.): 9,000 rpm, spindle motor power: 30,000 W, Equipment: chip conveyor, We are offering this used Matec 30 HV universal machining center, year of manufacture 2001. Iajdpsytnhbofx Agdjp Manufacturer: Matec Model: 30 HV Year: 2001 Condition: Used Category ID: 212 Type ID: 4166 Machine Type: Universal Machining Center Here we offer a used CNC machining center Matec 30HV with B axis. Year of manufacture: 2001 X-axis travel: 2000 mm Y-axis travel: 600 mm Z-axis travel: 800 mm B axis ±90°, 1° indexing Heidenhain 426/430 Spindle: 9000 rpm, 30 kW Through-spindle coolant (IKZ) Chip conveyor Z-axis brake defective. The axis droops when the machine is switched off. You can still mill with the machine. When powered on, the axis is held by the motor. The machine is still in daily operation with us. Sale is without warranty. If you have any questions or need further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 2009, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, This 5-axis Matec 30-HV was manufactured in 2009, featuring a versatile universal machining center with a large X-axis travel of 3000 mm and a Y-axis of 600 mm. It includes a high-speed range up to 12,000 rpm, a tool magazine for 36 tools, and a high-pressure cooling system (70 bar). Ideal for complex 3D machining with its powered CNC rotary table and Heidenhain iTNC 530 control. Contact us for more information about this machine. Additional information • Dimensions of Machine (LxWxH): X = 3000 mm (table 3500 mm), Y = 600 mm, Z = 800 mm Horizontal • Rapid traverse: 48 m/min in the X, Y, and Z axes • Powered CNC rotary table for 3D machining • Tool magazine for 36 tools • Tool length max: 380 mm • 3D measuring probe with radio control and radio signal transmission • High-pressure cooling along and through the spindle (70 bar) Iedpfx Aex D Rggsgdeap • Coolant tank: 900 l • Automatic doors

Condition: ready for operation (used), Year of construction: 2012, operating hours: 50,106 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, spindle speed (max.): 9,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec 30 HV vertical machining centre was manufactured in 2012. It features a generous X-axis travel of 3000 mm, Y-axis travel of 800 mm, and Z-axis travel of 800 mm (horizontal). The machine is equipped with a powerful motor spindle, capable of speeds up to 9000 rpm, and a maximum table load of approximately 2500 kg. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV machine we have for sale. Contact us for further details. • Travel Z: 800 mm (horizontal) • Travel Z: 700 mm (vertical) • Tilting swivel head with 1° indexing (Hirth coupling) • Swivel radius: 250 mm • Spindle power: 16 kW (40% duty cycle) • Spindle power: 11 kW (100% duty cycle) • Torque: 100 Nm (40% duty cycle) • Voltage: 400 V • Installed power: 55 kW • Central lubrication system • Machine status: fully functional • Operating hours: 50,106 h • Control: Rexroth IndraMotion MTX Additional equipment • NC rotary table Ø800 mm (horizontal), maximum table load approx. 2500 kg • Internal coolant supply through spindle (20 bar) • Paper band filter coolant system with approx. 450 l tank • Electronic handwheel • 3D measuring probe (Renishaw) • Work area lighting Iaodpjyrqvljfx Agdjp Technical Specification Taper Size SK 40

Condition: ready for operation (used), Year of construction: 2000, travel distance X-axis: 4,000 mm, travel distance Y-axis: 825 mm, travel distance Z-axis: 1,100 mm, table load: 4,000 kg, overall weight: 19,000 kg, This 5-axis Matec 30 HV CNC milling machine was manufactured in 2000. It features a milling spindle with a speed range of 20-9,000 rpm and a drilling capacity in St 60 of 60mm. The machine boasts large travel distances with X-axis at 4000 mm, Y-axis at 825 mm, and Z-axis at 1100 mm. It supports a maximum table load of 4000 kg. If you are looking to get high-quality milling capabilities consider the Matec 30 HV machine we have for sale. Contact us for more information. Additional equipment • Pneumatically opening doors • Partition wall for two-field machining • Ventilated measuring systems • Optional: High-pressure pump (40 bar) and NC rotary table Machine Benefits Iajdpfx Ajx D D D Esgdep Qualitative Machine Benefits • 2024: rear covers on x-axis replaced • 2023: glass scale on y-axis replaced Technical Machine Benefits • Rapid traverse speed: 30 m/min • Feed speed: 30000 mm/min • Max. Workpiece length for double-sided end machining: x = 3500 mm - 2 * max. Tool length • Clamping surface: x: 4500 mm on the clamping plate + rotary table, y: 850 mm; 7 grooves, spacing 125 mm • Hsk63 form a according to din 69893 with internal cooling • 48 magazine slots • Ikz: 20 bar Extra Information The machine is currently still in production and can be inspected during production if interested. Sold as seen, without guarantee and without warranty.ç Control Unit Num 1060 control Bosch axis controller Heidenhain measuring system Technical Specification Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 2010, travel distance X-axis: 3,000 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, swivel angle B-axis (max.): 105 °, swivel angle C-axis (max.): 360 °, This 5-axis Matec 30 HV mill-turn centre was manufactured in 2010. It features a traveling column with 3,000 mm X-axis travel, 600 mm Y-axis, and 800 mm Z-axis. The B-axis swivels ±105° and the C-axis rotates 360°, supporting complex geometries. Equipped with a Bosch Rexroth IndraMotion 10 control unit and a rotary table speed of 500 RPM, it enables precise turning and milling operations. For more information about this mill-turn centre, please reach out to us. Additional equipment • Turning Package: Enables high-precision turning operations in combination with standard milling, facilitating turning and milling in a single setup. Machine Benefits Qualitative Machine Benefits • 5-axis cnc machining center with traveling column, rotary table, and swivel head Technical Machine Benefits • Full 5-axis capabilities for complex part geometries • A manual 3-jaw chuck rota s plus 800 from schunk is installed on the rotary table. • There is no hardware runtime counter on the machine. Extra Information Isdpfxsx D Dy Ho Agdsap Machine still under power

Condition: ready for operation (used), Year of construction: 2013, travel distance X-axis: 2,000 mm, travel distance Y-axis: 600 mm, number of axes: 5, This 3-axis Matec 30 HV was manufactured in 2013. It features an impressive X-axis travel of 2000 mm, Y-axis travel of 600 mm, and Z-axis travel of 800 mm. The machine includes a maximum clamping weight of 1200 kg and a maximum spindle speed of 8,000 rpm. If you are looking to get high-quality machining capabilities, consider the Matec 30 HV vertical machining centre we have for sale. Contact us for further details. • Z travel H: 800 mm • Z travel V: 700 mm Iaedpfxeymm Exe Agdop • Interference circle diameter: 950 mm • Max. clamping weight: 1200 kg • Tool positions: 48

Condition: ready for operation (used), Year of construction: 2007, operating hours: 14,136 h, travel distance X-axis: 1,300 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 800 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC530, table load: 400 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 16,000 W, number of axes: 4, This 4-axis Matec MATEC 30 HV/K was manufactured in 2007, featuring a robust vertical machining center design. It includes a Rexroth control, a standard spindle with a speed range of 20-15,000 rpm, and a maximum torque of 100 Nm. The machine offers a tool changer with a capacity of 36 tools and a machine table that supports up to 400 kg. If you are looking to get high-quality milling capabilities consider the Matec MATEC 30 HV/K machine we have for sale. Contact us for more information. Machine Benefits Qualitative Machine Benefits • The machine was manufactured in 2007 but was retrofitted in 2016 Iaedpfx Aox D Ix Tegdop Technical Machine Benefits • Hard disk: 26 gb • Integrated network card • Max. Torque: 100 nm (40% ed) • Temperature-controlled liquid cooling • Work area: fully encapsulated with roof, bellows (steel slats) • Installation: height-adjustable set-up elements • Matec hv 30 was overhauled in 2016 by manufacturer matec maschinenbau Extra Information Cooling & Accessories Coolant: High-pressure Coolant Supply (20 bar, optional 40 bar) Paper Belt Filter (30 µm fineness) Tank Volume: 450 l Chip Conveyor: Integrated Scraper Conveyor Oil Mist Extraction: Electrostatic Filter (1000 m³/h) Measuring & Safety Technology Direct Measuring System: Linear encoder in all axes 3D Measuring Probe: Radio transmission to the control system Tool Monitoring: Laser-supported Tool Breakage Monitoring Tool Length Measurement (software) Optional Spindle (HSK 63-A): Higher Power: 30 kW / 190 Nm Drilling Capacity (steel): up to 60 mm Milling Capacity: approx. 500 cm³/min Technical Specification Taper Size HSK 63