Universal machining center

MATSUURA MAM72-25V PC2

Condition: ready for operation (used), Year of construction: 2007, operating hours: 66,963 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 450 mm, table load: 40 kg, rotational speed (max.): 15,000 rpm, TECHNICAL DETAILS B-axis: +110° to -110° C-axis: 360° Table indexing B and C axes: 0.001° Workpiece Max. workpiece size: Ø 250 × height 250 mm Max. table load: 40 kg Pallet System Pallet size: Ø 130 mm Max. workpiece size on pallet: Ø 250 × height 250 mm Max. pallet load: 40 kg Pallet interface: Capto C6 Spindle Standard speed range: 50 - 15,000 rpm Spindle taper: BT40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5 / 5.5 kW Max. torque: 65.1 Nm at 1,100 rpm Rapid Traverse and Feed Rates Rapid traverse X, Y, Z axes: 50,000 mm/min Rapid traverse B-axis: 30 rpm Rapid traverse C-axis: 50 rpm Feed rate X, Y, Z axes: 1…50,000 mm/min Feed rate B-axis: 30 rpm Feed rate C-axis: 50 rpm Fodpjwx Iugofx Aa Negi Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations occupied): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guideways Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws X, Y, Z axes Ø: 36 mm Pitch: 16 mm Axis Drives Motor rating X, Y, Z axes: 4.5 / 4.5 / 5.5 kW Motor rating B, C axes: 4.5 / 2.5 kW Axial force X, Y, Z axes: kN (value not specified) MACHINE DETAILS Control: MATSUURA G-Tech 30i (FANUC 30i MA) Serial number: SN17224 Weight & Dimensions Standard machine weight: 7,800 kg Machine with PC-2: 8,600 kg Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm Electrical Connections Total connected load (standard machine): 32 kVA Supply voltage: 3 x 400 V, 50 Hz Compressed air connection: 5.5-9.5 bar EQUIPMENT 5-axis simultaneous control Expanded tool magazine capacity to 40 tool stations Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, pressurized with sealing air KNOLL coolant system: 1 scraper or hinge belt chip conveyor with lift pump and chip discharge to operator side (Type: 500 K-1/10, year of manufacture 2010) 1 through-spindle coolant supply with KTS25-50T coolant pump, capacity 31 l/min at 70 bar, 5.5 kW, three-stage adjustable pressure 1 external coolant with coolant pump, capacity 100 l/min at 1.4 bar 1 coolant flush with coolant pump, capacity 100 l/min at 1.4 bar 1 compact filter KF200, filtration capacity 200 l/min 2 auger-type conveyors in the machine RENISHAW OMP 60 probing system for automatic workpiece zero-point setting and measurement, can be changed via tool changer OMRON pressure transducer for tool length measurement and tool breakage monitoring

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, 5-Axis Vertical Machining Center, used, year of manufacture 2007 / SN17224 / Control ON time: 66,963 hours Control System MATSUURA G-Tech 30i (FANUC 30i MA) for 5-axis simultaneous machining Travel X-axis travel: 550 mm Y-axis travel: 410 mm Z-axis travel: 450 mm B-axis: +110° to -110° C-axis: 360° Fsdpfx Aaowwk Dzj Njgi Max. workpiece size: Ø250 x height 250 mm Max. table load: 40 kg Table indexing B- and C-axes: 0.001° Pallet size: Ø130 mm Max. workpiece size: Ø250 x height 250 mm Max. pallet capacity: 40 kg Pallet interface: Capto C6 Spindle Speed range (standard): 50 – 15,000 rpm Spindle taper with face contact: BT 40 JIS B 6339 Big+ Spindle motor power with FANUC drive: 7.5/5.5 kW Max. torque: 65.1 Nm up to 1,100 rpm Rapid Traverse and Positioning Speeds Rapids: Rapid traverse X, Y, Z axes: 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Feeds: X, Y, and Z axes: 1 - 50,000 mm/min B-axis: 30 rpm C-axis: 50 rpm Tool Changer Max. tool weight: 10 kg Max. tool diameter (all stations filled): Ø96 mm Max. tool diameter (with adjacent stations empty): Ø150 mm Max. tool length: 300 mm Guides Axis guideways: Roller guides Lubrication: Permanent grease lubrication Ball screws Ball screw diameter X, Y, and Z axes: Ø36 mm Pitch: 16 mm Axis Drives Power X, Y, Z axis: 4.5/4.5/5.5 kW Power B and C axis: 4.5/2.5 kW Axial force X, Y, Z axis: kN Space Requirements* (standard machine) Machine height above floor: 2,705 mm Width: 2,281 mm Depth: 3,665 mm *Dimensions may differ for this particular machine! Machine Weight Standard machine: 7,800 kg Machine with PC-2: 8,600 kg Connections Total connected load: Standard machine: 32 kVA Machine with PC-2: kVA Connection voltage: 3 x 400V, 50 Hz Compressed air connection: 5.5 - 9.5 bar 5-axis simultaneous control Expandability of tool magazine capacity from standard 30 to 40 tool positions Pallet changer with 2 pallets, 130 mm diameter Direct path measuring system (Heidenhain) in X, Y, and Z axes, supplied with sealing air Coolant Systems KNOLL cooling system, consisting of*: - 1 hinged belt or scraper chip conveyor with lift pump and chip removal to the operator side (Type: 500 K-1/10, year of manufacture 2010) - 1 through-spindle coolant supply with coolant pump KTS25-50T, output 31 l/min at 70 bar, 5.5 kW coolant pressure, 3-switchable stages - 1 external cooling with coolant pump, output 100 l/min at 1.4 bar - 1 coolant shower with coolant pump, output 100 l/min at 1.4 bar - 1 compact filter KF200, filter capacity 200 l/min - 2 spiral chip conveyors in the machine, standard option Measuring in the Machine - RENISHAW OMP 60 probe for automatic workpiece zero-point setting and measurement, can be loaded into the spindle via tool changer - OMRON pressure gauge for tool length measurement and tool breakage monitoring Modifications and errors in technical specifications and information, as well as prior sale, are subject to change!