Stepless column drilling machine

MAXION Unimax 3 AV mit Gewindeschneideinr.

Condition: new, MAXION UNIMAX 3 AV pillar drilling machine Modern, precise production drilling machine based on the proven UNIMAX3 concept, with infinitely variable feed drive, automatic tool ejector and chip breaking control as standard, reversing switch right/left rotation. Feed rate, speed and drilling depth are shown in the display and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 25 mm Drilling capacity normal 30 mm Tapping capacity M 20 spindle MK 3 drilling depth 125 mm throat 260 mm Gbslhegv I U Sjccqqsl distance spindle/table 90 to 840 mm table surface 500 x 400 mm column diameter 110 mm total height 1.900 mm weight 280 kg motor power 0,8/1,5 kW Spindle speed infinitely variable range A 80-1.440 rpm Range B 180-3,200 rpm details see data sheet enclosed - please ask for further models

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 feed range - spindle 30 - 400 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed Gbjlhccqspam Hrsqel - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 Gbelhsb Hl Irjccqqel Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - Full motor protection - reversing switch right/left rotation - digital speed display - table adjustment via toothed rack - drill protection - emergency stop button - instruction manual

Condition: new, Spindle: MK 3 Continuous drilling capacity: 25 mm normal drilling capacity: 30 mm Tapping capacity: M 20 drilling depth: 125 mm throat depth: 260 mm Golhccjb Eli Heqqsbl Distance spindle/table: 90 to 840 mm table surface: 500 x 365 mm column diameter: 110 mm total height: 1.855 mm weight: 250 kg motor pole-changing: 0,8/1,5 kW Spindle speed infinitely variable range A: 80 - 1.440 min-1 range B: 180 - 3.200 min-1 Digital display for speed as standard.

Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition Gbslhjrz Tuwoccqqel

Condition: new, bore capacity in steel 30 mm Gjlhcofg U Tpecqqebl threading cutting capacity: M20 throat 260 mm bore stroke 125 mm spindle taper MK 3 spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 TAP Condition new machine Spindle speed (continuous): Gbolhjd Hrhvoccqqjl Area A-80 - 1,440 RPM. Area B 180-3,200 RPM. Standard ALB ear performance: 30 mm equipped as standard with: -infinitely variable speed control -Digital display for speed -Digital display for drilling depth -Thread cutting device -Light machine -automatic tool ejector -Manual

Condition: new, bore capacity in steel 30 mm threading cutting capacity: M20 throat 260 mm bore stroke 125 mm Gbolsfg U Tnjhccqqol spindle taper MK 3 feed range - spindle 0 mm/U spindle turning speed range 80 - 1440 / 180 -3200 U/min transmission ratio 2 Stufen column diameter 110 mm table surface area 500 x 365 mm total power requirement 0,8 / 1,4 kW weight of the machine ca. 0,27 t dimensions of the machine ca. 0,4 x 1,2 x 1,9 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 3 AVG Condition: New machine Spindle speed (infinitely variable): Range A 80 - 1.440 rpm Gslobrfmkjhccqqjbl range B 180 - 3.200 rpm normal drilling capacity: 30 mm standard equipped with: - infinitely variable drill feed - infinitely variable speed control - digital display for speed, feed and and drilling depth - automatic tool ejector - operating instructions with the following options: - Tapping device

Condition: new, Bench drill Make: MAXION Model: UNIMAX 1 TAP Condition: New machine spindle speed (infinitely variable): 200 - 4.000 rpm normal drilling capacity: 18 mm standard equipped with: - thread cutting device - digital speed display - digital drilling depth display - table adjustment via toothed rack - instruction manual Gbolheci A S Ssccqqel

Year of construction: 2005, Condition: good (used), Technical data: - Drilling capacity in steel ST 60 30 mm - Drilling spindle holder MK 3 - Feeds - drill spindle stroke 120 mm - Drilling spindle speeds infinitely variable 80 - 1400 rpm - Throat 260 mm - max. distance table - drilling spindle 760 mm - Table with 2 T-slots 500 x 350 mm - Height adjustable via gear rack with crank handle - Drive 400 V / 0.7 / 1.3 kW - Space requirement approx. W 500 x H 1900 x D 850 mm - Weight approx. 260 kg - with: - drill chuck 3-12 mm - Lighting Golhjf A Dywsccqqjbl

Condition: new, High performance threading machine with lead screw and optimal safety device against tool breakage. Program for single or continuous cycle. Electronically controlled motor braking for single cycle. Easy lead screw change by quick coupling. Technical data UNIMAX 3T GL: Threading capacity: M 4 - M20 Thread per hour: 800 Normal drilling capacity: 28 mm spindle: MK 3 thread depth: 90 mm drilling depth: 120 mm throat: 260 mm spindle / table: 220 - 600 mm table surface: 420 x 390 mm T-slot width: 14 mm column diameter: 110 mm total height: 1.300 mm weight: 250 kg special motor: 0,9 kW Gjlhegv I Unoccqqsbl Mains connection: 400 V / 50 Hz 9 spindle speeds: 95 / 160 / 200 / 350 / 420 / 450 / 750 / 900 / 1,650 rpm Standard packing: C - 160x75x125 cm Other accessories / options: Lead screw, tap holder, outfeed switch, forced-ventilated motor, die holder, flange quill, foot pulse button, two-hand start, LED machine light, minimum quantity lubrication system, base cabinet.

Condition: used, Boring power 32.0 mm bore capacity in cast iron 35.0 mm morse taper MK 3 spindle stroke 120 mm throat 260 mm column diameter 110 mm table: 515 x 355 mm turning speeds 80 - 1400 U/min total power requirement 0.7 / 1.3 kW weight 175 kg range L-W-H 750 x 520 x 1820 mm from a training workshop maintained condition (!!) Furnishing: - V-belt operated column drilling machine - adjustable drilling depth stop - Pole-changing drive motor - manual spindle feed via cross handle Gbelhou Rtu Ujccqqel - Work table with 3x T-slots - Table height adjustment via hand crank - Front main switch - Connection cable including 16A plug * Machine link: ?machineno=1008-9103754

Condition: new, Continuous drilling capacity in E 335: 18 mm Normal drilling capacity: 20 mm Tapping capacity: M 12 Spindle: MK 2 Drilling depth: 100 mm throat depth: 225 mm Speed range A: 100 - 2,000 min-1 Speed range B: 200 - 4,000 min-1 Gbjlhjcw H Sysccqqjl Spindle/table distance: 60 to 440 mm Table surface: 345 x 372 mm Column diameter: 90 mm Total height: 955 mm Weight: 110 kg Frequency-controlled three-phase motor: 1.5 kW Powerful, precise universal drill with a wide range of applications. Table/height adjustment via gear rack and worm gear. Three-phase motor, reversing switch right/left rotation, digital speed display, speed adjustment via potentiometer. UNIMAX 2 T with height adjustment from the front. Mains connection 230 V.

Condition: new, bore capacity in steel 40 mm threading cutting capacity: M30 throat 310 mm bore stroke 175 mm Gbelhefg U Tqsccqqel spindle taper MK 4 feed range - spindle 20 - 400 mm/U spindle turning speed range 60 - 1250 / 120 -2500 U/min transmission ratio 2 Stufen column diameter 120 mm table surface area 550 x 400 mm total power requirement 1,5 / 3,0 kW weight of the machine ca. 0,45 t dimensions of the machine ca. 0,7 x 1,4 x 2,0 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 4 Basic Condition: New machine Spindle speed (infinitely variable): Range A 120 - 2.500 rpm range B 60 - 1.250 rpm normal drilling capacity: 40 mm standard equipped with: - stepless drill feed - thread cutting device - infinitely variable speed control - handle cross switch - digital display for speed, feed and drilling depth - chip breaking function Gbslsci Su Djhccqqel - operating instructions with the following options: - Free cutting device

Condition: new, MAXION Unimax 4 Basic Plus pillar drilling machine Universal and very modern pillar drilling machine with MK4 spindle, tapping device, enormous power and very good price-performance ratio. The display shows feed, speed and drilling depth and the drilling depth is programmed. Technical data: Continuous drilling capacity in St 60 35 mm Drilling capacity normal 40 mm Tapping capacity M30 spindle MK 4 drilling depth 175 mm throat 300 mm distance spindle/table 70 to 830 mm table surface 650 x 500 mm column diameter 140 mm total height max. 1.980 mm weight 480 kg motor power 1,5/3,0 kW Spindle speed infinitely variable: Range A 120 - 2,500 min/1 Range B 60 - 1,250 min/1 Description: LED machine light Tapping device Chip breaking Chip removal Free cutting Details see data sheet in the appendix - please ask for further models Gjlhccqogv I U Ieqobl

Condition: new, Continuous drilling capacity in St 60: 35 mm Normal drilling capacity: 40 mm Tapping capacity: M 30 spindle: MK 4 feed infinitely variable: 20 - 400 mm/min drilling depth programmable: 175 mm throat depth: 300 mm distance spindle/table: 70 to 830 mm table surface: 550 x 400 mm column diameter: 120 mm Gelhceb Nbvgjcqqebl total height: 1.980 mm weight: 450 kg motor pole-changing: 1,5 / 3,0 kW spindle speeds stepless range A: 120 - 2.500 rpm Spindle speeds infinitely variable Range B: 60 - 1,200 rpm

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm Gbjlhccofg U Theqqol total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m Precise table drill: - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection

Condition: new, Column drilling machine Make: MAXION Model: UNIMAX 2 S TAP Condition: New machine Gbslhcscu Dwmecqqol Spindle speed (infinitely variable): Drilling: Range A 100 - 2,000 rpm. Range B 200 - 4.000 rpm. Threading: Range A 100 - 500 rpm Range B 200 - 1,000 rpm Normal drilling capacity: 20 mm standard equipped with: - thread cutting device - digital speed display - digital drilling depth display - table adjustment via toothed rack - LED machine light - instruction manual

Condition: new, MAXION Unimax 1 TAP bench top drilling machine with integrated tapping attachment Very powerful, universal bench drill with integrated thread cutting device and programmable digital display. Electrical drill protection as well as mains connection 230 V. Technical data: Continuous drilling capacity in St 60 15 mm Drilling capacity normal 18 mm Tapping capacity M 8 spindle MK 2 drilling depth 80 mm throat 180 mm distance spindle/table up to 380 mm table surface 250 x 220 mm column diameter 65 mm total height 910 mm weight 80 kg Motor power 1,1 kW spindle speed stepless 200 - 4.000 rpm. Spindle speed threaded 200 - 700 rpm. Mains connection 230 V / 50 Hz Equipment: Gbolhccogv I Uvjqqsl Infinitely variable speed control Table adjustment via toothed rack and worm gear Thread depth programmable Digital display Switch for clockwise / anticlockwise rotation Optimal for locations without three-phase connection Details see data sheet enclosed - please ask for further models

Condition: new, Continuous drilling capacity in St 60: 15 mm Normal drilling capacity: 18 mm Tapping capacity: M 8 spindle: MK 2 drilling depth: 80 mm throat depth: 180 mm spindle speeds infinitely variable 200 - 4,000 rpm spindle speeds for threads 200 - 700 rpm distance spindle/table: up to 380 mm table surface: 250 x 220 mm column diameter: 65 mm total height: 910 mm weight: 80 kg Gbelhccsb Eldnjqqsl three-phase motor frequency controlled: 1,1 kW with full threading device and programmable digital display machine in stock and immediately available

Condition: new, bore capacity in steel (diameter) 15 / 18 mm throat 180 mm bore stroke 80 mm turning speeds 200 - 4000 U/min 250 x 220 mm distance drilling head - clamping area max. 380 mm total power requirement 1,1 / 400 kW / Volt column diameter 65 mm tool taper MK 2 weight of the machine ca. 0,08 t dimensions 0,4 x 0,5 x 0,9 m precise bench drill: - Large speed range - Programmable thread cutting - high accuracy and quality - Drill table adjustable via rack and swiveling around the column - Full engine protection - Star grip - 230 volt mains connection Gbolhccefg U Tijqqjl

Condition: new, MAXION UNIMAX 1 frequency bench drilling machine Description: Precise, smooth running bench drill, in high accuracy and quality. Switch for clockwise / anticlockwise rotation, drilling table adjustable via rack adjustable and swivels around the column. Technical data: Continuous drilling capacity in E 335 15 mm normal drilling capacity 18 mm Tapping capacity M 8 Gelhcjcgbx Hjcqqebl spindle MK 2 drilling depth 80 mm throat 180 mm spindle / table up to 380 mm table surface 250 x 220 mm T-slot width 10 mm column diameter 65 mm total height 910 mm weight 80 kg Motor frequency controlled 1,1 kW Mains connection 230 V / 50 Hz Spindle speed infinitely variable 200 - 4,000 min-1

Condition: used, Functionality: fully functional, fuel type: diesel, Year of construction: 2004, operating hours: 6,360 h, engine type: 4-Zylinder Kubota-Dieselmotor, drive type: Diesel, net weight: 3,900 kg, Mini Excavator Gslhccqowh Enceqobl Condition: Ready for use and fully functional Technical Condition: Good Description: Tracked Excavator - Crawler Excavator - Mini Excavator KUBOTA KX 121-3 - - Year of Manufacture 2004 - - 6360 operating hours - - 3900 kg EC - - - Hydraulic quick coupler - - 2 used trenching buckets 30 + 60 cm - - 1 used rigid slope bucket 130 cm - - Cabin, heating, work lights - - 4-cylinder Kubota diesel engine - - Rubber tracks approx. 50% - - Excavator in good original condition!! Quick coupler, bucket, 3rd valve, 4th valve, heating, full cab,