CNC turning and milling centre

Mazak Integrex i-100H S

Condition: good (used), Year of construction: 2022, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: 328827, turning length: 900 mm, turning diameter: 600 mm, spindle motor power: 11,000 W, spindle speed (max.): 6,000 rpm, spindle bore: 61 mm, travel distance X-axis: 535 mm, travel distance Y-axis: 210 mm, travel distance Z-axis: 900 mm, mount diameter: 600 mm, rapid traverse X-axis: 48 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 40 m/min, milling spindle length: 300 mm, rotational speed (max.): 20,000 rpm, type of input current: three-phase, torque: 184 Nm, bar passage: 61 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 40 m/min, bar diameter (max.): 61 mm, overall weight: 12,000 kg, spindle diameter: 152 mm, Equipment: documentation/manual, The machine is equipped with the latest Mazatrol SmoothAi control, fitted as standard. The ease of conversational program creation in Mazatrol mode is ensured by the intuitive layout of auxiliary functions, supported by graphical and, above all, clear prompts and comments. TOOL HOLDERS SHOWN IN THE PHOTOS ARE INCLUDED IN THE PRICE. STANDARD TECHNICAL SPECIFICATION Working area Main spindle chuck size 6" Second spindle chuck size 6" Max. turning length 600 mm Standard machining diameter (from upper head) 600 mm Standard machining diameter (from lower head) 400 mm Bar machining capacity in main spindle 51 mm Bar machining capacity in sub-spindle 51 mm Main spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Max. torque (15% duty) 184 Nm Max. torque (25% duty) 161 Nm Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Second spindle Maximum spindle speed 6,000 rpm Minimum spindle speed 35 rpm Through-hole diameter 61 mm Motor power (40% duty) 11.0 kW Motor power (continuous) 7.5 kW Max. torque (15% duty) 184 Nm Cpedpexzk Swofx Ah Iow Max. torque (40% duty) 143 Nm Maximum torque (continuous operation) 105 Nm Milling head Type Single spindle with automatic tool changer Tool holder HSK-A63 / HSK-T63 Tool size (external diameter machining) 25 mm Tool size (internal diameter machining) 40 mm Tool size (max. milling tool diameter) 130 mm Tool size (max. milling tool length) 300 mm Motor power (40% duty) 24.0 kW Motor power (continuous operation) 14.0 kW Max. torque (15% duty) 59.7 Nm Torque (40% duty) 57.3 Nm Torque (continuous operation) 46.1 Nm Max. milling spindle speed 20,000 rpm Min. milling spindle speed 35 rpm Feed axes Rapid traverse X 48 m/min Rapid traverse Z 40 m/min Rapid traverse Y 40 m/min Rapid feed rate B 44.4 m/min Rapid traverse W 30 m/min Travel X 535 mm 535 mm (+485 mm / -50 mm) Travel Z 900 mm Travel Y 210 mm B-axis travel range 240° (-30° ~ +210°) Travel W 900 mm 0850U INTEGREX I-100H S 850U MR406 Milling spindle 20,000 rpm SI098 Sub-spindle synchronization AS080 Overload detection system CS503 Through-spindle coolant 15 bar / flushing CS664 Preparation for extraction unit (Gx500) MB255 B-axis measuring probe (RMP60) MB650 Calibration sphere + magnetic base MB624 Smooth Set And Inspect (Multi-Tasking) CV041 Side chip conveyor (hinged belt) TE810 Preparation for Multi&Flash system NO056 Y-1 MAZAK API NO059 MTConnect adapter NO066 Smooth synchronous tapping (with milling spindle) NO072 Automatic peck drilling cycle with load monitoring NO116 Smooth 5-axis control (EIA/ISO) NO123 Tool radius compensation in 5-axis machining NO134 Simultaneous 5-axis machining on the second spindle NO442 Slope Constant (G00 motion optimization) NO482 Thread re-entry NO599 Cylindrical (G07) and polar (G12) interpolation

Condition: like new (used), Year of construction: 2024, operating hours: 150 h, Smooth Ai Control Max. turning diameter: 600 mm Max. turning length: 850 mm Cpodpfx Asxvqm Rjh Iow Travel paths: X-axis: 535 mm Y-axis: 210 mm Z-axis: 900 mm B-axis: -30° to 210° (0.0001° increments) Main spindle motor: 11 kW Max. main spindle speed: 6,000 rpm Max. bar capacity: 52 mm Max. counter spindle speed: 6,000 rpm Milling spindle motor: 12 kW Capto C6 Max. milling spindle speed: 12,000 rpm B-axis, 0.0001° resolution Tool magazine for 38 Capto C6 tools IKZ interface 70 bar Knoll KF150/950 compact filter system 70 bar high pressure pump Mayfran MT10 chip conveyor 5-axis machining package for Smooth Ai Cylinder interpolation 5-axis simultaneous machining on the counter spindle Synchronized tapping G84.2 and G84.3 Thread chasing function Mazak API Full C-axis on counter spindle (0.0001°), C1 + C2 synchronization Linear scale for X-axis Linear scale for Y-axis Mazak Monitoring B, Renishaw RMP60 probe 3-jaw chuck main spindle, Kitagawa BB206 3-jaw chuck counter spindle, Kitagawa B206