Horizontal Turning Machine

MORI SEIKI NL3000Y/1250

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Lrjdpfxexdcigo Aaqsh Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Year of construction: 2008, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 5000 mm Measurements height 2340 mm Machine weight 11700 kg Main Drive Spindle speed range 3500 Number of axis 5 Movement X-Axis Movement 255 mm Y-Axis Movement 100 mm Z-Axis Movement 800 mm Table Number of tslots 2x12 Lsdjx D Hwuopfx Aaqsrh This 6-axis DOOSAN Puma TT 2500 SY was manufactured in 2008. It features a max turn diameter of 390mm, bar passage of 76mm, and a max working length of 700mm. Spindle speeds reach up to 3500 RPM with live tools at 4000 RPM. Ideal for complex turning tasks. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Ledpfx Asw Rry Neaqerh Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Year of construction: 1997, condition: ready for operation (used), Turning diameter: 200mm, Unrun diameter: 260mm, Turning height: 200mm, Spindle clearance: 30mm, Spindle speed: 7500rpm, Power: 10kW, Torque: 49Nm. Travel X/Z: 520mm/200mm, rapid traverse X/Z: 30m/min, tool positions: 14, tool holder: VDI 30, drive tool speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2100mm/2100mm/2300mm, weight: approx. 3300kg, control: Siemens Sinumerik. The X-axis of the machine makes running noises. Documentation available. On-site inspection is possible. Lodpfxovpvinj Aaqjrh

Year of construction: 2005, operating hours: 6,235 h, condition: ready for operation (used), General Data Measurements width 2200 mm Measurements depth 4100 mm Machine weight 11600 kg Control Unit Brand FANUC Model 18i-TB Main Drive Spindle speed range 5000 Lrsdpfjx D H Tcjx Aaqoh Spindle motor power 22 kW Number of axis 3 Movement X-Axis Movement 255 mm X-Axis Rapid Traverse 20000 mm/min Y-Axis Movement 120 mm Y-Axis Rapid Traverse 7500 mm/min Z-Axis Movement 800 mm Z-Axis Rapid Traverse 24000 mm/min C-Axis Movement 360° Workpiece Workpiece weight 120 kg Turret Number of turrets 2 Tools Number of station 12 Media Chip conveyor Yes Additional Equipment Measuring Probe: Tool Measuring Probe Automatic Bar Loader: ILS-RBK10016 L 2265 mm, W 1116 mm, Approx. 490 kg Bar Loader Max. Material Length/Diameter: 1600 mm/5-65 mm Magazine Short Bar Feed with Servo Drive Main and Counter Spindle with Power Chuck D = 250 Enclosed Work Area Enclosure According to Accident Prevention Regulations Memory Card Input Socket, RS 232 Socket Tool Load Monitoring, Bed Flushing Workpiece Air Blow-off Function Automatic Tool Measuring Probe // Driven Tools on Both Revolvers This 3-axis DAEWOO PUMA TT 2000 SY was manufactured in 2005. It features a turning diameter over bed of 800 mm and a maximum bar diameter of 65 mm. Equipped with a Fanuc 18i-TB control system, it offers spindle speeds up to 5000 rpm and includes a tool turret with 12 stations. Consider the opportunity to buy this DAEWOO PUMA TT 2000 SY horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2021, Lathe CMZ TTL 66, year of manufacture 2021 New price €418,000 Ledpsw D Sm Dsfx Aaqorh 9,500 power-on hours