HYDRAULIC PRESS

MULLER

Condition: good (used), Year of construction: 2016, Ref:11076 . 2016 Muller Martini SIGMA Three Knife Trimmer On demand trimmer for digital dooks finishing Features: Designed for the finishing of both offset- and digitally-produced books in a one-off, short-, or large-run workflow. Fully-automated, one-off book 3-knife trimmer. Ultra-efficient digital book trimming system with zero makeready for optimal one-off book production. Workflow can be consolidated and efficiently processed through the SigmaTrimmer work center with minimal production planning effort & considerable labour savings. Bound, untrimmed books of varying sizes and thickness can be fed into the SigmaTrimmer continuously, without stopping to change parts or key in any data. Gijdpfxeyw Hwds Ag Aou Book printers can cut books of different formats and thicknesses in quick succession, without interruption. The format for each book is read with a barcode scanner during infeed and all settings are made automatically, which eliminates makeready time. Specification: Max speed: 1,000 cycles/hr Max untrimmed size: 320x240mm Min untrimmed size: 154x108mm Max book thickness: 40mm Min book thickness: 2mm Max Front trim: 86mm Min front trim: 3mm Max foot trim: 75mm Min foot trim: 3mm 5 x Sigma trimmers available, all the same age. Can be bought individually or as multiples.

Condition: excellent (used), Year of construction: 2003, Ref:10925 . 2003 Muller Martini 3631 ‘CB-16’ Book Stacker. Compensating counter stacker for perfect bound books. Comprising:- Positive tape infeed 2-up product handling capability Separating and counting system Automatic function monitoring by micro-processor Electronic programming of counting function Twin tape table delivery. Specification: Book size, Max: 450 x 450 mm Min : 140 x 100 mm Intake thickness, Max: 3 - 70 mm Stack height, Max: 240/300 mm Gsdpfxevzzt Ao Ag Aeiu Mechanical speed, Max: 18,000 cycles/hr. Air required : 6 bar, consumption: 50 Nm3/hr. (Note: separate compressor or in-house supply required).

Condition: excellent (used), Year of construction: 2010, Ref:10684 . 2010 MULLER MARTINI HK75 (pair) Ref:10687 . 2005 MULLER MARTINI HK75 (pair) Ref:10686 . 2005 MULLER MARTINI HK75 (pair) Ref:10682 . 2010 MULLER MARTINI HK45 NARROW (single) Ref:10680 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10678 . 2002 MULLER MARTINI 0249 LOOP (pair) Ref:10677 . 2005 MULLER MARTINI 0249 LOOP (pair) Gisdpot Dpqqofx Ag Aou Ref:10676 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10675 . 2005 MULLER MARTINI 0249 LOOP (pair) Ref:10673 . 2010 MULLER MARTINI 0249 LOOP (pair) Ref:10674 . 2010 MULLER MARTINI 0249 LOOP (single) Ref:10679 . 2005 MULLER MARTINI HK45 NARROW (pair) Ref:10683 . 2010 MULLER MARTINI HK75 (pair) Ref:10685 . 2010 MULLER MARTINI HK75Q (single) Ref:10681 . 2005 MULLER MARTINI HK45 NARROW (single)

Condition: excellent (used), Year of construction: 2007, Ref: 10815 . 2007 Muller Martini 3215 Ventura High speed, fully automatic sewing machine Features: High range of product sizes Papers from 22 gsm Feeder and/or knife opening Innovative sewing system Patented loop formation with compressed air Quick change between different type of stitches Gijdpfxet Sybco Ag Asu Equipped with: Suction opening 4 + 4 for products with or without over fold Optical scanning system Additional parts for processing of thin printing Stacker delivery Max signature length: 510mm Max. speed: 12,000/hour

Condition: excellent (used), Year of construction: 2009, operating hours: 19,000 h, Ref:11108 . 2009 Muller Martini ‘Acoro A5’ Perfect Binding Line Excellent condition line with only 19,000 hours worked! Comprising: 16 x 1571/21" top loading feeders + hand feed station ASAC thickness control Gsdpjzaa Rbefx Ag Aeiu ASIR III signature recognition & 3715 reject unit M.M. 3642 automatic book block feeder M.M. 'Commander' automatic make-ready Muller Martini 3026-20 ‘Acoro A5’ with 20 x Combi-clamps Measuring table for automatic make-ready ICS C80 & 30 EVA pre-melt tanks EVA spine gluing tank EVA Hot-melt side gluing tank Gauzing station Pile/rotary cover feeder 2 x nipping stations Lay-down delivery unit to; Two tier 180 degree flat conveyor system to; M.M. 3671 ‘Merit S’ three knife trimmer Including accessories, tools & manuals. N.B. Compressed air required – NOT included. Specification: A5/21” Binder book sizes, Max: 430 x 320 mm Min: 140 x 100 mm Book thickness, : 3 -- 60 mm Clamp opening, Max: 82 mm Open cover width, : 203 - 642 mm Mechanical speed, Max: 5,000 cycles/hr.

Condition: excellent (used), Year of construction: 2006, Ref:11110. 2006 Muller Martini ‘Bolero B8’ Perfect Binder 8,000 p/h perfect binding line. Comprising: 12 x 3693/24" top loading feeders Solema ‘Fastbook’ Book block feeder Muller Martini “ASAC” calliper control Muller Martini “ASIR III” signature recognition Reject system with downstream delivery M.M. Automatic motorised make-ready with “Commander” Control System. Book transfer section with main drive motor Muller Martini Bolero 3028/24" with 21 clamps Giedpfjzb Rfxox Ag Aou Spine preparation units with cutting/milling, equalising notching Interchangeable glue system comprising; PUR spine glue pre-melter PUR spine gluing tank on universal base 2 x EVA hot-melt pre-melt tank EVA hotmelt spine & side glue tanks Inclined stream cover feeder with 6 line score 2 x cover nipping stations Lay-down delivery unit to; Flat & spiral conveyor system to; (2007) Kolbus HD 153.P trimmer to; Rima RS-3313S compensating stacker Specification: B8/24” Binder book sizes, Max: 510 x 320 mm Min: 140 x 100 mm Clamp opening, : 2 -- 80 mm Final book thickness : 3 -- 60 mm Mechanical speed, Max: 8,000 cycles/hr.

Condition: excellent (used), Year of construction: 2005, Ref: 11098 . 2005 Muller Martini ‘Corona CC-12’ EVA / PUR High Speed Perfect Binder. Excellent condition! Only 36,800 hours worked! Comprising: 36 x 3695/24” top loading feeders with sequential stop/start + handfeed station ‘ASAC’ copy control system with 3714 downstream shut-off element Gjdpfx Aey Ib S Reg Aoiu Jogging unit 3643 and Spiral Raceway element 3641 M.M. automatic motorised make-ready with “Commander” Control System. Programmable with data retrieval, menu-guided set-up and on-the-run adjustment Book transfer section with 25 kW drive motor M.M. ‘Corona CC12-23’ with 22 x 23” Combi-clamps Spine preparation units with cutting/milling/sanding/brushing Interchangeable spine gluing units, comprising; ICS30 EVA hot-melt side glue pre-melt tank 30 ltr. ICS80 EVA hot-melt spine glue pre-melt tank 80 ltr. PUR pre-melt unit PUR spine glue unit EVA hot-melt spine glue unit EVA hot-melt side glue unit Stream cover feeder with nipping Lay-down delivery unit to: Flat conveyor system (details on request) to: NO TRIMMER (trimmer can be found and added) Specification: 3695/24" Gatherer - sig. sizes, Max: 500 x 320 mm Min: 140 x 100 mm CC12/24” Binder book sizes, Max: 510 x 305 mm Min: 140 x 100 mm Book thickness : 3 -- 60 mm Clamp opening, Max: 80 mm Open cover width : 203 - 642 mm Mechanical speed, Max: 12,000 cycles/hr.

Condition: used, empty load weight: 3,550 kg, maximum load weight: 10,850 kg, overall weight: 14,400 kg, axle configuration: 2 axles, first registration: 02/2012, next inspection (TÜV): 04/2027, loading space length: 5,000 mm, loading space width: 2,420 mm, suspension: steel, tire size: 385/55R19,5 150J, color: other, gearing type: other, front tire size: 385/55R19,5 150J, rear tire size: 385/55R19,5 150J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Lashing eyes, wide tires, -- subject to printing errors, mistakes and changes reserved, sample images --, More data at: !, More details: ! Giodpfxjzc U Ade Ag Aju

Condition: excellent (used), Year of construction: 1975, functionality: fully functional, throat depth: 450 mm, Very good condition! With gearbox: Capacity: 300 t Strokes: 35 spm Throat depth: 450 mm - Pneumatic clutch Gjdpfxezc Rw Rs Ag Aeiu - Ram weight balance Ram stroke: 20 - 140 mm Ram adjustment: 80 mm Motor power: 30 HP

Condition: used, Year of construction: 2007, Müller Martini Acoro A7 Year: 2007 / 2000 / 1999 Consisting of Gathering machine Müller Martini 3693 Year: 2007 Description: - Chain tensioning station - Hand feeding station - Number of gathering stations: 15 - ASIR Automatic Signature Image Recognition: III - ASAC automatic self adjusting calliper - PIAB - Reject gate for incomplete products: 3715 - Intermediate element - Book block feeder: 3642 - Transfer into the binder Perfect binder Müller Martini Acoro A7 - 3027 - 22 Year: 2007 Description: - Semi automatic setting - Colour monitor with touch screen - Book measuring table: 3013 - Number of clamps: 22 - Main milling station - 1st spine preparation station - 2nd spine preparation station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: ICS C80 - PUR spine gluing unit, interchangeable (nozzle) - PUR premelter for PUR spine glue unit: Meler Micron Pur - Base for 2nd spine glue system - 2nd hotmelt spine glue unit, interchangeable - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit - Drum cover feeder - Scoring station - Pump(s) - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device Transport system Müller Martini Description: - Transport system, length (approx): 60 mtr - Escape delivery Three knife trimmer Müller Martini Merit S - 3671 Year: 2000 Description: - Digital display - Right hand infeed - Automatic hopper feeder for inline production - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) Book stacker Müller Martini CB 16 - 3631 Year: 1999 Description: Giedok H Sfhopfx Ag Aeu - Compensating stacker - Turning device - Delivery to the right