Compressed air pump for fresh oil

MWH mit Haspel

Condition: repair required (used), Functionality: not functional, used drilling rig , consisting of : - drilling machine MAXION , 50 mm , infinitely variable speed adjustment - hydraulic feed device , without hydraulic unit - 2-spindle drill head BOHRMASTER , max. 32 mm drilling capacity - Pneumatic clamping device Laolhccowduw Eoqmea - Sliding table with spray plates , table 1200 x 600 mm, adjustment range 600 mm - Coolant device - Separately standing : Electric cabinet . For setting up : - Feed device without hydraulic unit - Electrical system (without wiring diagram) .

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 1 h, Functionality: fully functional, machine/vehicle number: N2104796, GEM F470 automatic cardboard box sealer with automatic LATCH LOCKING FOR CONSTANT CARDBOARD FORMAT incl. centering unit and PLC S7 Siemens control system BOX DIMENSIONS: - Length : min. mm. 150 - max. mm .600 - Width : min. mm. 100 - max. mm. 520 - Height : min. mm. 100 - max. mm. 670 TECHNICAL DATA: - SPS Siemens S71200 control - Centering unit infeed RCC500 - Drive & guide belts Vertical - Carton format setting Manual - Bottom & lid sealing unit - Standard version T22 / T23 - Tape width From 50 to 50 mm depending on the unit - Tension adjustable - Max tape roll diameter 360mm - Core tape roll 76mm - Mains voltage 400V, 3F, N, PE - 50/60 Hertz - Consumption 0.25 kW - Degree of protection IP 54 - Working environment + 5° C - max. +35° C - Transport speed 22 mt/min. - Average production 1200 cartons/hour - Working height 650 mm - Weight 293 kg Lslhou Tk Dioccqmjaa - Machine dimensions (L x W x H) mm. 2,470 x 990 x 1,782H - CE safety protection: side sheet metal covers with access door, supplemented with infeed doors L 850 mm, top and bottom cover. Illustration may contain options subject to surcharge

Condition: good (used), Year of construction: 2007, Functionality: fully functional, Kolbe MWE-32 Meat Grinder Mixer In good used and working condition. New belt and motor. Lajlhcowcgr Eecqmsa The machine runs on 400 volts, is made entirely of stainless steel, has a mixing paddle, is 98 cm Enterprise, has been tested in the workshop, and is ready for immediate use. FD 200 loading, built in 2009. The machine is built in 2007. Further information upon request. Cash or advance payment. Sale to businesses only. No guarantee. No warranty.

Condition: like new (used), Year of construction: 1990, Functionality: fully functional, GANNOMAT JUNIOR 320 Dowel and Slot Drilling Machine Very good condition, as good as new. The machine comes from an assembly company and has been used very little. It can mill slots and drill dowel holes on two levels without re-clamping. 380V, 1500W 2800 rpm Built in 1990 With this machine, you can mill slots for lock cases and similar items, or create all types of frame dowel joints, at right angles, butt joints, and miter joints. Ideal for producing dowel joints in timber frame construction, furniture, door, window, and staircase construction, and similar applications. Drilling on two levels, the grids and stops, and the machine's design allow dowel joints to be produced in a very short time, making it very economical. The machine requires a 6-bar compressed air supply (air consumption is very low). Clockwise rotation Milling and drilling Very good and clean. With 2 angle stops (a center stop and a side stop that can be used on both sides) and a 45° miter stop. You also get a 2000mm long stop rail with 2 folding stops. This stop rail can also be extended. The workpiece is clamped with 2 pneumatic clamping cylinders. The height adjustment from one drilling level to the other is also pneumatic. The pneumatic switch for this is located at the front of the machine, ensuring quick adjustment of grids and drilling levels. With a 12mm precision grid rail, which has a center grid and 12 grids on the left and right. Can be quickly converted to mortise milling. The machine can then be used without a grid. With 2 adjustable stops on the left and right, it then has a working width of max. 420mm. The machine has conical stop rings at the front of the machine table, which can be rotated downwards if necessary. The maximum hole height is 100mm. The maximum The hole depth is 150 mm with stop and scale. The maximum workpiece height is 160 mm. Everything works perfectly. The machine will be delivered and demonstrated by us personally throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible upon request. The machine table is 870 mm wide, 140 mm deep at the sides, and 350 mm deep in the middle. Professional tool, not hardware store junk. Lolhccjwb U H Isqmeaa You can start working with the machine immediately. With 2-jaw drill chuck up to 20 mm. Very stable and durable construction. The precision guides with the play-free ball bearing bushings are OK and operate smoothly.

Condition: good (used), For sale is a very good Erowa UPC with ITS and a mounting device for a measuring machine plus switching valve, in addition there is also an Erowa UPC P chuck for sale Ljlhccevv Hrmjqmjaa

Condition: good (used), Note: This is a used steel locker. Slight damage (e.g., scratches, dents, dirt, or similar) may be present. The scope of delivery includes: 1x Steel locker with sloping roof, used Material color: gray Door color: gray Number of doors: 2 with ventilation grille Door handle: Turn-lock lock Overall width: approx. 610 mm Overall depth: approx. 500 mm Overall height: approx. 1,895 mm Weight: approx. 50.0 kg Locker compartment layout per door: Door handle: 1x Turn-lock lock Compartment dimensions: approx. 285 x 490 x 1,600 mm (W x D x H) Clothes rail: 1x | approx. 280 mm Hat base: approx. 285 x 307 x 400 mm (W x D x H) Lockable with a padlock (Padlock not included) 1x Bench with shoe rack Laslhccqowaa D Aomoa Dimensions: approx. 610 x 810 x 410 mm (W x D x H) Shoe rack dimensions: approx. 570 x 285 mm (W x D) Weight: approx. 15.0 kg Total dimensions: approx. 610 x 800 x 2,305 mm (W x D x H) Currently in stock: approx. 21 units. Your contact persons: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item will incur additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles Laelhcoh R Taqecqmoa - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Year of construction: 2021, operating hours: 10 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S21MythoEasyLow04, Exhibition machine - like new. MYTHO EASY Low Very low height machine Winding height 2400 mm Turntable 1650 mm LP Flat turntable 30mm flat - 500mm long Max. Load weight: 1200 KG PowerStretch 200%, changeable by gear wheels 150-200-250% Automatic adjustable double cord formation - see pictures. Automatic. Cutting Leljv Iqtljhccqmoaa Optionbal: Film clamp on turntable German. Schuko plug 6 programs individually storable Further demonstration units available immediately from stock. Prices ex stock Ludwigsburg

Condition: new, - High level of protection and comfort during welding - Particle filter with spark arrestor, pre-filter, and 5-stage filter saturation indicator that shows the user the condition of the particle filter - Optional gas and odor filters can be used for additional protection against common gases, vapors, and unpleasant odors that can arise during welding - Automatic airflow control ensures the airflow to the headpiece is always constant. - Immediate visual and audible alarms are triggered when specified limits are continuously exceeded (battery power, airflow monitoring). The Adflo powered air respirator system draws in contaminated air from the environment, filters it through the appropriate filters, and then directs the purified air into the headpiece via an air hose. For further information on the protection levels and any usage restrictions, please refer to the operating instructions for the respective headpieces. Set: 3M Adflo Starter Kit · 1x Adflo Powered Respirator 837730 · 1x QRS Air Hose 834016 · 1x QRS Adapter 533506 · 1x Air Flow Meter 838020 · 1x Prefilter 836010 · 1x Spark Arrestor 836000 · 1x Particle Filter 837010 · 1x Li-Ion Standard Battery (approx. 8 hours) 837630 Lelhcjwbiq Uecqmsaa · 1x Belt 835000 · 1x Charger 833111 · 1x 3M Versaflo Safety Helmet M306 with Comfort Face Seal and Polycarbonate Visor, Clear Cheapest price online: approx. €1,100 Here for €929

Condition: new, Year of construction: 2025, Circulating air chamber oven, electric, new device, delivery time 12 weeks -Temperature 250°C Laslhccqev Hg Eusmsa -Inside WxDxH 2100 x 2100 x 2000 mm -Contents 8820 liters -Control Eurotherm Nanodac -Controller / recorder with color touch display -2 circulating air fans -Double door with safety door sensors -Overtemperature protection, Eurotherm 3216i -2 fresh air fans -Automatic flaps -Electric version, 400 V / 50 Hz / 3NPE -Increased heating output approx. 70 kW -Temperature accuracy +/- 6 K in empty oven -Documentation, CE declaration of conformity -Electrical circuit diagram with spare parts list Note: The oven floor is not insulated but only covered with stainless steel sheet. This allows free access with all track widths. Alternatively, the floor can also be offered insulated (with drive-in rails to be defined by the customer). We offer new and used industrial furnaces, which we also convert and add to according to customer requirements. Furnace, furnaces, drying furnace, industrial furnace, drying cabinet, heating furnace, heating cabinet, convection furnace, chamber furnace, heating furnace, chamber convection furnace, tempering furnace, tempering furnace

Condition: as good as new (ex-display), operating hours: 5 h, The device is in mint condition and has only been used once. According to IVM Signtex, the new price is €19,395.81. IR heat tunnel with quartz tube, width: 90 cm, heated part 300 cm, power 400 V, 15 kW, max. temperature Laelhccqsvx I Ibjmoa 200° C, overall dimensions (LxW): 470cm x 120cm

Condition: excellent (used), Year of construction: 1992, Functionality: fully functional, MARTIN T25 Tilting Spindle Router Very good condition. The machine comes from a small model making company and has been used very little. It is in excellent condition. Everything works perfectly. All bearings and guides are OK, the machine runs very smoothly. Year of manufacture: 1992. A stop jaw on the router stop can be adjusted in depth, with fine adjustment and a scale. This allows for planing work, e.g., with a glued profile. The entire router stop can also be completely adjusted in depth using an adjusting wheel and a threaded spindle, allowing very precise and quick adjustments. The stop is rotatable. With a lever-operated spindle lock. The chips can be easily removed with two 125mm extraction nozzles on the router stop and 100mm on the machine table. With a 30mm spindle, which can be continuously swiveled from -5° to 45°. The spindle is swiveled electrically with a very precise display. 40 mm spindle can be installed with right/left rotation The machine will be delivered and demonstrated by us personally throughout Germany for €220.00, so you have no risk with your purchase. Shipping to Austria and the rest of the EU is also possible upon request. With a large table opening of up to 480 mm, which can be reduced using various rings (this allows the use of very large diameter cutters and allows safe milling even with small cutters). With 3000, 6000, 4500, and 9000 rpm. The spindle height is also electrically adjustable, and there is also a very precise display. Very robust and durable design. The machine was built for the most difficult milling work; it is suitable for all milling applications. Optimal power transmission via V-belt drive. With description. With AIGNER integral stop jaws. With 4-roller HAFFNER feed, type 908. The feed has right/left rotation and 8 speeds. The feed rollers are individually mounted and all are in very good condition. The machine table is 1180 mm wide and 800 mm deep. Lelhccqswa Ea Aemoaa The machine is ready for immediate use. 380 V, 5000 and 6000 W thanks to the two speeds. With all necessary safety devices, motor brake, and emergency stop switch. The machine is approved by the German Wood Industry Association (Holz-BG), and has the GS and CE test seals. The machine weighs approximately 1200 kg. With motor protection switch to prevent overload. Professional tool, not junk from a hardware store. Optimal, simple, fast, and safe handling.

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Lelhcomhhy Njcqmoaa Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Year of construction: 2024, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S22EVA_07, Exhibition machine - like new. EVA Turntable / base frame increased / Ø 1,500 mm Max. pallet dimensions: 800 x 1,200 mm Max. load capacity: 1,500 kg Wrapping height (pallet included) 2,200 mm Raised base frame by 150mm - 200mm, for charging with E-Ant - adjustable Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 1 storable wrapping program F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - manual winding F12 - winding to a stored height (while switching off the light button) F29 - Soft start cycle for edge protection application Soft start to reduce film tears on sharp pallet edges FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE via manually adjustable brake roller on the foil carriage Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2KW / 6A Laolhjv Iqwdeccqmja Other systems are immediately available from stock.

Condition: excellent (used), Viessmann Vitoplex/105kw low-temperature boiler with oil burner Ljlhowauaxeccqmeaa

Year of construction: 2011, Condition: refurbished (used), Currently undergoing general overhaul, delivery time on request, -max. temperature 250 °C -total steam space 20.5 m³ -usable dimensions (LxWxH) 2300 x 2750 x 2200 mm -control Jumo Imago 500 -heating output 72 KW -minimum exhaust air volume flow at 20°C: 140 m³/h -max. load of the kiln car 6000 kg -electrical supply and exhaust air flaps Belimo -exhaust air fan controlled via frequency converter -installation dimensions (LxWxH) 3000 x 3000 x 3125 mm -own weight approx. 3500 kg -free-standing control cabinet -documentation Visit to our warehouse by arrangement. Laolhjttbf Ujccqmoa furnace, furnaces, industrial furnace, convection furnace, chamber convection furnace, tempering furnace, heating furnace, drying furnace, tempering furnace

Condition: new, Cantilever rack, new H: 400cm, base +3 storage levels with roof & rear panel Free delivery within Germany, except islands Data : - H : approx. 400 cm - D : approx. 147 cm - L : approx. 1420 cm - Cantilever arms : approx. 125 cm - Axial dimension: 290 cm (can be adapted to customer requirements) - New goods - made in Germany. - Delivery time approx. 6 weeks after commercial clarification. - 1000 kg load per arm - 4000 kg load per upright - Uprights in hot-dip galvanized. - Cantilever arms in hot-dip galvanized. Lelswahddohccqmjaa - Arms are bolted. - Arms adjustable in 200 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 06 x uprights, incl. base approx. 400 cm made of IPE270. - 18 x cantilever arms approx. 125 cm made of IPE 120. - 06 x roof girder approx. 150 cm made of IPE 120, 5° rising roof pitch. - incl. roof and rear wall material. - incl. all necessary connecting elements and screws. Why BLT cantilever racks ? - Certified German manufacturer DIN EN 1090 - Made in Germany - All specified load-bearing capacities of the uprights and cantilever arms are statically verifiable at 100% load. - All shelving systems are supplied in a hot-dip galvanized version. They can therefore be installed both indoors and outdoors and do not rust like painted systems. Consistent appearance for many years. - We use the legally prescribed hot-dip galvanized screw fittings in accordance with DIN EN 15048-1 - Long after-sales guarantee - The upright base and upright back are welded together, providing additional safety and short assembly times because the feet do not have to be bolted to the upright back. - Bracing made of angle steel, so no adjustment with turnbuckles necessary. This shortens the assembly time. - No slotted hole system, therefore no weakening of the upright profile. Price : 12.250,00 € net plus statutory value added tax. You will receive an invoice with VAT shown. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your operating equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Condition: new, Year of construction: 2022, Nettopreis € 17802 Bruttopreis €21185 The unit is NEW, complete with controls, diesel tank, exhaust and batteries. Everything that is required for commissioning is included. (without fuel) Specifications// Perkins engine 1103A-33TG2, 3 cylinder Lajloh Ibbgshccqmea Continuous power: 48 kW / 60 kVA Maximum power: 52 kW / 66 kVA water cooled Connection: direct connection, optional sockets, circuit breakers, ATS. Frequency : 50Hz Voltage: 400/230V RPM : 1500 rpm. Controller: Datakom D300 Year of production: 2021 Dimensions (LxWxH): 2450 x 1000 x 1850mm Weight: 1370 kg 100% load l/h 14 75% load l/h 10 50% load l/h 7 Network monitoring, soundproof Ready to use. Shipment: - Worldwide transport is available at an additional cost. If you don't have a forklift and need an unloading service, please let us know in advance. - In order to be able to quote an exact freight price, please send us an inquiry with your zip code and your contact details

Condition: excellent (used), Year of construction: 1983, Functionality: fully functional, MARTIN T 42 Thickness Planer It is visually and technically in very good condition. The machine comes from a small assembly company and has been used very little. Everything works perfectly. With kickback protection. Lajlhcjv Urq Socqmoa The planer block has a locking mechanism for changing the planer knives. The chips can be easily removed thanks to the closed system. With a 4-knife block for standard planer knives. You will receive a setting gauge. The thicknessing table is mounted on 4 sturdy trapezoidal spindles, preventing tipping and twisting. With a protective cover that can be folded upwards. Max. planing width 630 mm, max. planing height 250 mm. The machine meets all requirements of the German Wood Industry Association (Holz-BG) and has the GS test seal. We will personally deliver and demonstrate the machine throughout Germany for €220.00, so you have no risk when purchasing. Delivery to Austria and the EU is also possible upon request. The machine is quiet according to DIN 45635. With very good noise levels. Effective rubber infeed and outfeed rollers, both new. The feed speed is continuously adjustable from 8-20 m/min. With a 160 mm suction nozzle. The height of the thicknessing table is adjusted via a handwheel. The handwheel features a counter that allows the planing thickness to be read very precisely. The contact pressure of the outfeed pressure bar can be adjusted using a rocker lever. With this machine, you can achieve a very clean planing finish. Thanks to the powerful 5500 watt motor, there are almost no signs of fatigue. The machine is largely made of gray cast iron. The machine contains four sharpened knives. Very robust and durable design, excellent workmanship with the highest quality. The machine is ready for immediate use. 380V, 5500W 5000 rpm Year of manufacture: 1983 Weight: approx. 1050 kg Optimal, simple, fast, and safe handling.

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S23MythoSarya03, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm Lelhjv Iquvjccqmoaa 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Condition: excellent (used), Buderus GE315/200kw low-temperature boiler with oil burner Lelhswauarsccqmjaa

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,500 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total height: 2,500 mm, load capacity per stand: 1,120 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 250 cm 140 kg/arm META Multistrong Data : Lajlhccqowahcaomsa - H : approx. 250 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1120 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 4 storage levels (5 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 250 cm made of IPE120. - 16 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 12 x META shelf, approx. 100 x 60 cm - incl. all necessary connecting elements and screws. -- Available immediately Price : 1765,00 € net 2100,35 € gross You will receive an invoice with VAT included. Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2025, Condition: as good as new (ex-display), Functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) Laelhccsv Npx Noqmoa F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: new, Year of construction: 2024, Functionality: fully functional, carrying capacity per cantilever arm: 140 kg, shelf height: 2,000 mm, total length: 3,150 mm, axle spacing: 1,030 mm, total width: 810 mm, total height: 2,000 mm, load capacity per stand: 1,300 kg, approx. 3.15 running meters Cantilever rack with shelves 60 cm deep H: 200 cm 140 kg/arm META Multistrong Data : - H : approx. 200 cm - D : approx. 81 cm - L : approx. 315 cm - Cantilever arms : approx. 60 cm - Axial dimension : 103 cm - NEW GOODS immediately from stock. - 140 kg load per arm - 1300 kg load per upright - Uprights in RAL5010 (gentian blue). - Cantilever arms in RAL5010 (gentian blue). - Arms are hooked in and secured with locking bolts. - Arms adjustable in 70 mm increments. - Levels: Base + 3 storage levels (4 storage levels) Shelf consists of : - 04 x uprights, incl. base approx. 200 cm made of IPE120. - 12 x cantilever arms approx. 60 cm made of rectangular profile 40 x 30 mm. - 09 x META shelf, approx. 100 x 60 cm. - incl. all necessary connecting elements and screws. -- Available immediately Price : 1449,00 € net 1724,31 € gross You will receive an invoice with VAT included. Lslhswahbveccqmoaa Accessories such as ground anchors, collision protection etc. can also be purchased from us. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation.

Year of construction: 2025, operating hours: 1 h, Condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Laolhccev Iqqwsqmja Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control