Belt Grinding Machine

NKO PASOVEC 150/2

Condition: new, width of the strips 75,0 mm 8U2Ot9Gf3I band length 2000 mm band speed 29,0 / 14,5 m/sek grinding width 460 x 75 Plantisch mm Dust suction hood 100 mm total power requirement 3,0 kW 100% ED weight of the machine ca. 72,0 kg range L-W-H 1080 x 440 x 1000 mm Stable belt grinding machine with 3.0 KW motor with 2x tape speeds Also very suitable for grinding STAINLESS STEEL The free-standing belt sander PÁSOVEC 75 is a 2-speed machine for efficient and at the same time economical sanding of surfaces, edges and Rounding of parts made of carbon and stainless steel, aluminum and other non- ferrous metals such as wood and plastic. The machine has a total two workstations for contact and face grinding. The height of the grinding arm can be adjusted to the operator's body proportions. The machine has an integrated preparation for the suction connection ex works. The Changing the sanding belt is just one thing thanks to the lever tensioning mechanism of a few moments. further description : - Good grinding performance due to high belt speed - Quick adjustment for horizontal and inclined position - Continuous plane grinding surface for optimal grinding of long workpieces - Universally applicable for grinding edges, surfaces and cylindrical grinding - Graphite coating on the plane grinding surface increases the sliding properties of the sanding belt Scope of delivery : - Abrasive belt 75 x 2000 mm, 80 grit - Hinged protective screen - Grinding and support table - Workpiece stop - Dust extraction nozzle - Separate off button - Machine base

Condition: new, width of the strips 150 mm band length 2000 mm band speed 29 / 14,5 m/s total power requirement 3,0 kW weight of the machine ca. 90 kg dimensions of the machine ca. 421x967x1069 mm for efficient and at the same time economical sanding of surfaces and edges and rounding parts made of carbon, stainless steel, aluminum and others Cjudg8O9Ul non-ferrous metals such as wood and plastic. Contact wheel diameter: 200 mm Nominal diameter of the extraction socket outside: 100 mm Sound pressure level: 87 dBA - Number of speeds: 2-speed - 1 pc sanding belt 150 x 2000 mm grit 80

Condition: new, width of the strips 75 mm band length 2000 mm band speed 29 / 14,5 m/s 2Zmiroyi total power requirement 3,0 kW weight of the machine ca. 72 kg dimensions of the machine ca. 533x967x1069 mm for efficient and at the same time economical sanding of surfaces and edges and rounding parts made of carbon, stainless steel, aluminum and others non-ferrous metals such as wood and plastic. Contact wheel diameter: 200 mm Nominal diameter of the extraction socket outside: 100 mm Sound pressure level: 87 dBA - Number of speeds: 2-speed - 1 pc sanding belt 75 x 2000 mm grit 80

Condition: new, width of the strips 100 mm band length 2000 mm band speed 15/30 m/s total power requirement 3,0 kW weight of the machine ca. 159 kg dimensions of the machine ca. 768 x 1185 x 1417 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Dpfmvf Station for flat grinding small workpieces Low running costs

Condition: new, width of the strips 75 mm band length 2000 mm band speed 30 m/s total power requirement 3,0 kW weight of the machine ca. 70 kg Cvu9Giruj7 dimensions of the machine ca. 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead man's switch Station for flat grinding small workpieces Low running costs

Condition: used, Universal milling head, milling adapter, milling extension, angle milling head -Manufacturer: Stankoimport, universal milling head from milling machine 6P / 2 -Recording output: SK50 -Recording: input gear -Milling head: completely swiveling -Stroke: 72 mm Bvl0Rocpez -Electric motor: see photo nameplate -Transport dimensions: 940/560 / H500 mm -Weight: 304 kg

Year of construction: 2018, Condition: new, HEAVY DUTY ELEVATING CROSSRAIL RAM TYPE CNC VERTICAL BORING AND TURNING MACHINE WITH HARDENED & GROUND BOX GUIDEWAYS CAPACITY Maximum Turning Diameter - Ø 1,600mm Busubhdq0T Maximum Turning Height - 1,400mm Maximum Torque - 17,885 Nm Maximum Cutting Force - 3,000 kgf Maximum Workpiece Weight - 8,000 kg TABLE Table Diameter - Ø 1,250mm Table Speed - 0.9 ~ 360 RPM Table Speed Range - AUTOMATIC 2 STEP RAM HEAD Tool Size - 32 mm² Spindle Taper - ISO 7/24 #50 Ram Cross Section - 220mm² TRAVEL AND FEEDRATE X-Axis Travel (Saddle Horizontal) - 1,060mm Z-Axis Travel (Ram Vertical) - 900mm Vertical Travel of Cross Rail - 700mm Maximum X / Z-Axis Cutting Feedrate - 7,500mm / Min X / Z-Axis Rapid Feedrate - 7,500mm / Min Cross Rail Rapid Traverse - 300mm / Min ATC Type of Tool Holder - MAS BT 50 12 Tool Magazine Capacity Maximum Tool weight - 50kg MOTOR Table Motor (Cont. / 30 min) AC 37.0 / 45.0 kW X / Z-Axis Servo Motor AC 7.0 kW POWER SOURCE Input Power Supply - 415V / 50Hz / 3PH Power Capacity - 80 kVA DIMENSIONS AND WEIGHT Height - 5,290mm External Width (With Chip Conveyor) - 6,760mm External Depth - 4,565m Weight - 25,800kg STANDARD SUPPLIED MACHINE FEATURES Fanuc 32i-A Control System Table, Servo Drives And Motors 4 Jaw Independent Chuck Automatic Tool Change System Lubrication Oil Cooler Hydraulic Power Unit Automatic Lubrication System For Guides Coolant System And Wash Gun Foundation Bolts And Nuts Tool Box Through Tool Coolant Operator And Programmer Manuals Splash Guard And Safety Guard Rail X-Axis Slideway Protect Steel Cover Work Light Patrol Lamp (Red, Yellow And Green) NC Power Off Chip Pan Levelling Blocks Electrical And Mechanical Manuals FANUC 32I CNC

Year of construction: 1978, Condition: ready for operation (used), Drilling capacity Ø 50 mm, table size 1000x1640 mm, spindle nose MT-5, quill stroke 400 mm, quill Ø 80 mm, outreach 1755 mm, nose to table 450-1600 mm, 21 speed 20-2000 rpm., motor 4 KW, 12 feeds, dimensions 2700x1100x3430 mm, weight ca. 4800 kg Bfnw3Oxktw

Year of construction: 1980, Condition: used, sheet width 2050 mm plate thickness 8 mm distance between columns mm electrical . weight of the machine ca. 6,3 t Csaqzqbagg

Year of construction: 1987, Condition: good (used), Machine/vehicle number: 3409, Lg.No. 17381 Technical data: - Drilling capacity 60 mm - throat 1600 mm - Drilling spindle holder MK 5 - drilling spindle stroke 390 mm - spindle speed, 20 steps 20 - 2000 rpm - right- left rotation - feed, 12 steps 0,056 - 2,5 mm/rev - drive 400 V / 12,8 kW - Clamping of boom and drilling unit electromechanical - Distance machined machine bed - drilling spindle sleeve - min. approx. 900 mm - max. approx. 1600 mm - usable machine bed with 4 T-slots 950 x 1700 mm - coolant device - cube table - space requirement approx. W 2600 x H 3000 x D 1000 mm Kepp293M - weight approx. 4500 kg

Year of construction: 1991, Condition: used, - Grooving saw unit: controlled (on and off) Jfaq2Ox - Main saw unit - Note: This machine has been specially built for grooving and ripping drawer fronts. In general, panels can be grooved or split.

Fuel type: diesel, Empty load weight: 12,000 kg, Condition: used, Weitere Optionen und Zubehör Hs9Fewof7 Further Information Konstruktionsjahr: 1992, Farbe: Unbekannt, Breite: 250 cm, 1 Schlüssel, Kennzeichen: OB-90-PL

Condition: used, Year of construction: 2023, for Iromat normal sprinkler / Dpdzpl

Year of construction: 1978, Condition: reconditioned (used), Functionality: fully functional, Debarking machine Valonkone VK26T-2 rotors with in and out feeding conveyor Renovated and workshop inspected. Operating: for softwood Timber length 1,8- 6m Log diameter: 10-61cm The speed of the debarker is, depending on the ambient conditions 20-45m/ min The Valonkone VK26T lines consisting of: • main machine • in feeding table (motor driven) • out feeding unit ( motor driven ) • electric cabinet • hydraulic aggregate for pressure (knives) technical main specification: Bmeltzsk7 debarking capacity: 10cm - 61cm diameter log length min. 3.0m 1. rotor: reducer with 4 knives 2. debarking rotor : 4 abrader knives+ 4 cutting knives speed of the rotor =210 rpm / min Rotor opening=65cm 55 KW motor, rpm 1500/ min Speed ca 45m/min Dimension (without in feed and out feed table) L= 11.3400 mm In feeding table: 5006 mm x 1000mm x 1930mm conveyor chain feeder direct motor driven 11 Kw Weight 1800 Kg main VK26T machine: 4500mm x 2200mm x 2790mm 1. reducer motor 75 kW 2. debarking motor 45 kW Gearing motor 15 kW Weight 7500 Kg out feeding device 1300mm x 960mm x 1350mm Weight 760 Kg Electric cabinet and safety devices with Delta 3 phase start for 75 kw main motor with Delta 3 phase start for 45 kw main motor with Delta 3 phase start for 15 kw gearing motor Main starter

Year of construction: 1974, Condition: used, Groove jointing head for milling machine, milling head, CCCP / USSR STANKO type 1502 No: 200 year of construction 1974 stroke size: max. 60 mm stroke rate: approx. 200 - 500 strokes/min. tool holder: 12 x 17 mm with clamping plate hole spacing machine flange plate: 245 x 185 mm mounting hole: Ø 17 mm Centering diameter at machine flange plate: 190 mm - Stroke size adjustable via eccentric adjustment - The drive is the same as for the normal vertical head from the machine gearbox - Drive via driver, centric in the centering diameter - Degree scaling on the flange plate +/- 45° steplessly swiveling - This groove joint head is flanged instead of the normal vertical milling head (mounting instead of vertical milling head, milling head) weight: 42 kg good condition Bdro9Im3Ow Groove joint head bearing number 58166 and vertical milling head bearing number 58164 from identical STANKO milling machine.

Condition: good (used), Code: 0555 Brand: STEMA 2 BR Model: INSERMATIC CB/86 - CE Standard B2Crpw8Bd3 Drilling and inserting machine for furniture hinges , kitchens, cabinets, furniture in general - CE Standard Technical data: Drilling unit: Electropneumatic unit with motor Hp 2- 3000 rpm - Works from bottom to top, from under the panel - Drilling head: 3 spindles for hinges - 2 spindles for mounting plates Hinge insertion unit: N°1 single loader Worktable: rubber-coated rollers width 500 mm N° 6 mechanical stop blocks Suction 1 mouth diameter mm 80 Panel clamping: N° 2 vertical pressers Volt 380/50 Compressed air 6 atm Overall dimensions: mm 3600 x 1300 x 1300 h Weight kg 530

Condition: like new (used), In this offer you purchase a used Rotate-Crease and Trim module ‘Plockmatic RCT II’ Object of sale: 1 x RCT 2 for: Plockmatic PBM350 Plockmatic PBM500 Further accessories also in stock Meter readings: Bxtk08Xkbq Total: Approx. 2,617 booklets Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Dppsc7 Rev.: 9-54 rpm Angular drive, clutch, brake gear several pieces for sale from stock.

Condition: ready for operation (used), Functionality: fully functional, Year of construction: 1955, Operating hours: 1,500 h, Power: 7.35 kW (9.99 HP), Fuel type: diesel, Fuel consumption per hour: 3 l/h, Maximum speed: 35 km/h, Color: green, Working width: 1,000 mm, 2 Holder Diesel type EDII, year of construction 1955, 500cm³, with various accessories such as reversible plow, harrow, potato hoe, etc. One Holder 4 wheel with drive axle all wheel up to 35Km/h various crawling gears for off-road . with hydraulic foot brake, hand brake. Only for sale as a package. Gok0N0 The vehicles start very easily. Price VB

Condition: used, Year of construction: 2015, Functionality: unexamined, Load capacity: 27 kg, Controller manufacturer: Yakasawa, Controller model: FS100, Control cabinet width: 450 mm, Control cabinet height: 200 mm, Type of input current: three-phase, Payload: 27 kg, Control cabinet length: 400 mm, We have for sale 2 Motorman / Yakasawa robots. one with a 12kg payload (manufactured in 2016) and the other has 27KG (manufactured in 2015). They both have Teach pendants and controllers. Both robots remain untested but were working when removed. Upfepd2Edp Collection only from CV47 8HA United kingdom

Condition: used, Travel distance X-axis: 800 mm, Travel distance Y-axis: 520 mm, Travel distance Z-axis: 510 mm, 2x Stama MC 734 MT 6-axis milling machine with robot Stama MC 734 MT (machine number 5) Tool magazine 48 pieces on chain and 90 pieces in additional magazine Milling spindle 12000 rpm Capto C6 tool holder Fanuc Series 31i-Model A5 control Coolant system and chip conveyor Operating hours: approx. 48974h Machining time: 19357h Travels: x 800 mm, y 520 mm, z 510 mm Rapid traverse 60m/min Stama MC 734 MT ( machine number 6 ) Tool magazine 48 tools on chain and 90 tools in additional magazine Milling spindle 12000 rpm Capto C6 tool holder Control Fanuc Series 31i-Model A5 Chip conveyor Operating hours: approx. 16482h Machining time: 14456h Travels: x 800 mm, y 520 mm, z 510 mm Rapid traverse 60m/min One coolant system for both machines. Robot Västerås: Clara suction unit not included ! More photos on request You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved. B2Qjaktqpc

Condition: good (used), Year of construction: 2016, Code: 0375 Brand: MACO 2/L Model: 400/C - CE Standard 3-works Combined machine (Surface planer/Thickness planer/Mortiser) for wood, composite materials, plastics - CE Standard - Year 2016 Technical data: Surface planer: Milled and rectified cast iron tables Worktable dimensions mm 400 x 1800 Knife shaft diameter mm 70 N° 3 knives C93Bqte Thickness planer: Wood passage mm 4-220 Feed speed 7 mt/min Work table mm 400 x 760 Mortiser: Work table mm 250 x 500 Longitudinal/transverse/vertical stroke mm 205/95/90 Spindle mm 0-16 Single-phase motor Hp 3 Overall dimensions mm 1950 x 1100 x 1100 h Weight kg 390

Condition: not inspected (used), In this offer you purchase a used intraoral scanner ‘iTero Element 2’ Object of sale: 1 x iTero Element 2 No password Bognabtj8Qr Condition: This offer is for a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: used, Functionality: fully functional, Rotational speed (max.): 90 rpm, Electrovariable electric motor 1.8kw, 3.2-90 1/min Manufacturer: Getriebebau NORD 32-RV30-90 L/8-2 BRE16 Power: 0.45/1.80 kw Voltage: 230/400 V 50Hz 0.31A Rotation: 3.2-90 1/min IP44 Shaft diameter: 40mm Weight: 50kg Gearbox: Dppsfd Manufacturer: Getriebebau NORD Type: 90L/8-2 BRE16 IP54

Condition: used, Luenette Diameter 150 mm Height without base 420 mm Width of the foot 125 mm Xiuerke79