Decoiler straightening machine

NORMATIC DY 500 X3000

Condition: used, Coil line – Uncoiler and Leveler Year of construction: 1991 Coil width: 50 to 450 mm Sheet thickness with inactive leveler: 6 mm Sheet thickness with active leveler: 2 mm - Very good condition and comprehensive operating instructions Space requirement of the entire system L x W: approx. 7000 x 3000 mm Weight of the entire system: approx. 11 tons Good condition Leveler HMS Type RS 47-04/1, Machine No. Coil width, nominal width: 400 mm Coil width, maximum passage width: max. 455 mm Coil thickness at 400 mm width: max. 1.5 mm (for steel) Coil thickness at 400 mm width: max. 2 mm (for copper) Speed: max. 40 m/min Number of leveling rolls: 7 pieces Leveling roll diameter: Ø 40 mm Number of tension rolls: 2 pieces Tension roll diameter: Ø 80 mm Infeed height, passage height: 1500 mm - Leveling rolls hardened, ground, and hard chrome-plated, with central support - Tension rolls hardened, ground, and hard chrome-plated, with hydraulic gap adjustment - Manual adjustment of the leveling rolls - Infeed guide with hydraulically extendable tongue and hydraulically adjustable idler roller - Adjustable lateral coil guide - All leveling rolls driven via distributor gearboxes with universal joints - Both tension rolls driven via gearboxes with universal joints - Frequency-controlled drive via geared motors - Leveler opening stroke 250 mm for cleaning the system or for processing thicker material, stroke movement via trapezoidal spindle - Ultrasonic loop control Transport dimensions L x W x H: 3600 x 2200 x 2200 mm Weight: approx. 4 tons Uncoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outer diameter: max. 1600 mm (with loading table) Coil outer diameter: max. 2000 mm (without loading table) Diameter of the coil inlet disc: Ø 1700 mm Coil inner diameter, spreading range: 460-520 mm Coil width, nominal width: max. 630 mm Gjdpfxoif Sg Se Aqvjui Width of the spreading jaws: 750 mm Height of the uncoiler arbor above the base plate: 1500 mm - Drive of the uncoiler arbor via hydraulic motor and gear - Pneumatic retarder brake on the uncoiler arbor TWINFLEX - Hydraulic spreading of the uncoiler arbor, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading table with 12 tons lifting capacity and 300 mm stroke - Uncoiler in an above-floor running frame with motorized transverse travel drive Transport dimensions L x W x H: 3500 x 1900 x 2500 mm Weight: approx. 5 tons Central hydraulic unit, separate Tank capacity: 350 liters Drive power: 18.5 kW - Drive motor with 2 pumps REXROTH (tandem pump) - Oil cooler as an air heat exchanger with fan motor Transport dimensions L x W x H: 1600 x 850 x 1450 mm Weight: approx. 800 kg Electrical cabinet, separate - All cable connections are made via Harting connectors Transport dimensions L x W x H: 2800 x 500 x 2250 mm Weight: approx. 800 kg

Condition: used, Year of construction: 1987, functionality: fully functional, table length: 950 mm, table width: 910 mm, pressing force: 80 t, overall weight: 16,500 kg, punching force: 80 t, Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 - 1000 SPM Mains voltage: 400 V Mains frequency: 50 Hz, 60 Hz Power consumption: 43 kW Control voltage AC: 24 V Compressed air connection: 6–10 bar Stroke length adjustment: 16, 19, 26, 35, 43, 51, 58, 63 mm Ram adjustment: 76 mm Average upper tool weight: 600 kg Maximum tool width: 970 mm Bolster area: L–R: 950 mm F–B: 910 mm Ram area: L–R: 760 mm F–B: 510 mm Max. tool width (L–R): 970 mm Strip inlet height: Gedpexzr Rusfx Aqvoui Max.: 160 mm Min.: 70 mm Strip feeder (left): Bruderer BBV 202/120 Max. strip width: 202 mm Feed pitch: 0–120 mm Bed opening: L–R: 920 mm F–B: 320 mm Machine dimensions: Length: 2834 mm Width: 1742 mm Height: 3460 mm Total weight with 1× BBV 202: approx. 17,500 kg Electrical cabinet dimensions: Length: 1200 mm Width: 500 mm Height: 1025 mm Weight: approx. 250 kg The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, Completely overhauled BRUDERER high-speed stamping press BSTA125 incl. new press control system Technical data: Gjdpfx Aqjy D H H Ejvoui Tonnage: 1250 kN Tooling opening: 1170 mm Strokes per minute: 100–850 SPM (depending on selected stroke) Adjustable stroke: 16, 19, 26, 35, 43, 51, 58, 64, 70, 75 mm Ram adjustment range: 89 mm Tool installation height: 268–386.5 mm (depending on selected stroke) Bolster plate: 1150 x 1070 mm Ram area: 1040 x 600 mm Strip pass width: 440 mm Base plate opening: 1120 x 350 mm Strip entry height: 80–180 mm Strip feed direction: left to right Feeder: servo feed

Condition: used, Year of construction: 1994, operating hours: 28,000 h, functionality: fully functional, The Bruderer BSTA 80H is an 80-ton high-speed stamping press built for heavy-duty progressive-die production, fitted with a BBV 320/200 strip feeder and Unidor tool monitoring. In stock in Pforzheim, ready for inspection. Nominal force: 800 kN (80 tons) Tool monitoring: Unidor Stroke rate: 100–1,000 spm Strip feeder: Bruderer BBV 320/200 Adjustable stroke: 16–63 mm Clamping plate area: 970 mm Main drive: 43 kW Power supply: 380 V / 50 Hz Ram area: 760 x 510 mm Table area: 950 x 910 mm Strip inlet height (adjustable): 80–180 mm Max. strip width: 360 mm Guodpfx Aezibtbjqvei Max. material thickness: 3 mm Machine dimensions: 2834 x 1742 x 3460 mm Weight: approx. 15,550 kg Operating hours (main drive): approx. 28,067 h More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Condition: used, Year of construction: 2004, pressure 80 t stroke 16 - 63 mm no. of strokes 100 - 750 /min distance between columns 970 mm dayligth (stroke and adjustment up) 380 mm column travel -side 380 mm table surface area 940 x 910 mm hole in the table 770 x 190 mm table height over floor 1180 mm ram surface 940 x 510 mm ram adjustment 76 mm material width 203 mm material thickness - 6,0 mm feed length 0 - 120 mm power requirement 37,0 kW Weight 14,50 t Gujdpjzrpq Hefx Aqvsi dimensions of the machine ca. 2,7 x 1,7 x 3,6 m with infinitely variable drive, pneumatic clutch/brake combination, semi-automatic stroke adjustment, motoric ram adjustment, fix table, circular oil lubrication mechanical roll feed Bruderer BBV 205/120 with drive via main shaft / pivot shaft of the press consoles Guethle CK 01/0800

Condition: used, Year of construction: 1994, machine/vehicle number: 940082, Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW Gujdouqc Hrspfx Aqvoi

Condition: used, Year of construction: 2003, Item No.: Lg 35626 Coil handling system KOHLER 30.400/9 - 2000.2H used Year of manufacture: 2003 Machine No.: 70330 Working direction: from left to right Loading side: rear Consisting of: Double unwinding reel 2000.2H Load capacity: max. 2,000 kg/side Coil width: 85 to 400 mm (when using a pressure arm) Spreading range: 360 – 420 mm Outer diameter: max. 1,800 mm Spreading: hydraulic/sliding wedge system + Automatic retension Drive: 2 x hydraulic motor + auxiliary drive for coil feeding and rewinding Braking: spring-loaded/disc brake Coil diameter-dependent control Lateral displacement: motorized Displacement distance: approx. 200 mm Base frame: frame construction Swiveling: motorized 180°, locking pneumatic, actuated wedge Counter bearing: manually attachable with quick-release fastener, open construction Coil loading: by means of rope or strap Spreading: The spreading is carried out hydraulically via a sliding wedge system. The reel is additionally equipped with an automatic retension system, so that the clamping pressure is maintained for several days. Counter bearing: The counter bearing is designed as a ring strut construction and can be attached manually. Two effective quick-release levers ensure a secure hold. The lightweight construction made of square tube profile in an open design has a total weight of approximately 15 kg with an outer diameter of 1600 mm. Automatic brake control/coil diameter dependent A diameter-dependent brake control is achieved via a proportional valve. During the acceleration and deceleration phase, the braking effect is automatically adjusted via a correspondingly controlled proportional pressure control valve. This control technology guarantees smooth coil unwinding. Base frame with motorized lateral displacement of the reel 2 x pressure roller, swiveling: The pressure roller is used to feed the coil into the straightening machine. It also prevents the coil from jumping when the coil strapping is released. The swiveling of the roller, which is coated with plastic, is carried out hydraulically. The contact pressure can be adjusted continuously. The drive of the roller is carried out via a hydraulic motor. Coil straightening machine 30.400/9 Passage width: max. 400 mm Number of straightening rollers: 9 pcs. Straightening roller diameter: 30 mm Straightening roller material thickness: 0.4 – 3.0 mm Roller stand adjustment: motorized (2-point) The complete straightening roller bearing is mounted on a slide plate at the top and bottom and can be manually moved in and out. Measuring device: digital Gedszpbazepfx Aqvsui Measuring display: metric Setting accuracy: 0.01 mm Straightening roller bearing: needle bearing Bearing sealing: shaft seals Straightening roller hardness: HRc 60 Straightening roller surface roughness: 0.001 mm and better Straightening roller drive: individual drive Gearbox: distribution gearbox Lubrication: grease lubrication of the straightening roller bearing Oil circulation lubrication of the cardan shafts Drive: three-phase motor with frequency control Speed: 0 - 40 m/min Number of coil feed rollers: 2 Coil feed roller diameter: 120 mm Coil feed roller adjustment: pneumatic Drive coil feed: both rollers from the straightening machine gearbox Surface coil feed rollers: like straightening rollers

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: NC control, degree of automation: semi-automatic, actuation type: electric, coil inner diameter: 300 mm, coil outer diameter: 1,300 mm, coil weight: 1,500 kg, product width (max.): 550 mm, sheet thickness (max.): 3 mm, power: 2.5 kW (3.40 HP), input voltage: 200 V, input current: 3 A, input frequency: 50 Hz, Equipment: documentation/manual, Manufacturer: DATEC Type: DATEC MN7-550U Year of manufacture: 2000 Guedeyangkopfx Aqvoi Max. sheet width: 550 mm Power: 3x200V, approx. 2.5kW Sheet thickness: approx. 0.3 – 3.2 mm Coil weight: up to 1–2 tons

Condition: used, Year of construction: 1988, Ref. No.: Lg 35526 Gedpfxeyb A Swj Aqveui KOHLER Strip Processing Line 18.260/19 - 1000.2H used Year of manufacture: 1988 Direction of operation: left to right Loading side: front Comprising: Double decoiler 1000.2H Load capacity: max. 1,000 kg per side Strip width: max. 260 mm Mandrel expansion range: 460 – 520 mm Outer diameter: max. approx. 1,200 mm Straightening Machine 18.26019 Passage width: max. 260 mm Number of straightening rollers: 19 pcs Roller diameter: 18 mm Straightenable material thickness: 0.3 – 1.5 mm Drive power: approx. 7 kW Speed: 0 – 40 m/min Roller adjustment: motorized (2-point) Used, as-is, ex stock, immediately available. Overhaul available on request. Delivery time by arrangement. Further data to follow or upon request. All information is based on manufacturer’s data and is non-binding for us – Subject to prior sale and errors excepted.

Condition: excellent (used), Year of construction: 1992, number of straightening rollers: 21, total length: 3,200 mm, straightening roller diameter: 30 mm, total height: 2,100 mm, total width: 2,000 mm, sheet thickness (max.): 6 mm, Decoiler Max. width 350 mm Clamping area coil internal  mm Coil diameter 1500 mm Work load 1000 Kg Straigtner Gjdpfx Aszcu S Sjqvsui Width 250 mm Roll diameter 30 mm Number off rolls 21 units Working speed 40 M/Min   Max. thickness 6 mm at 240 N/mm2 Max. Thickness 5 mm at 400 N/mm2 Length:3200mm Width:2000mm Height:2100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!