Machining Center - Vertical

OPTIMUM OPTImill F 150 HSC

Condition: used, Year of construction: 2019, x-travel 550 mm y-travel 305 mm z-travel 460 mm Control Sinumerik 808D adv. Siemens Main spindle: turning speed range - main spindle 10 - 10.000 min/-1 power capacity - main spindel 11 / 7,5 kW max. Torque 70 / 48 Nm tool taper BT 40 work table: table surface area 800 x 320 mm max. table load 300 kg 0L7Wqd2 T-slots 3x 14 x 100 mm distance spindle /table 100 - 600 mm Tool-Presetter: number of toolpositions 12 pos. tool taper BT 40 max. tool diameter 70 mm max. tool weight 6,0 kg change-time tool to tool 7,0 sec feeds: rapid traverse ( X / Y / Z ) 10 m/min feed speeds max. 10.000 mm/min repeating accuracy +/- 0,008 mm positioning accuracy +/- 0,01 mm total power requirement 15 kVA weight of the machine ca. 2,9 t dimensions of the machine ca. 3,5 x 2,5 x 2,4 m CNC-MachiningCenter Vertical OPTIMUM - OPTImill F 105 CNC - NEW MACHINE / SHOW-ROOM-MACHINE - alternative configuration available, optional and on request !

Condition: as good as new (ex-display), Year of construction: 2022, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 HSC Premium CNC milling machine direct from the manufacturer. F 150 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Length approx. 3000 mm Width/depth approx. 1950 mm Height approx. 2310 mm Weight approx. 4350 kg Drilling/milling capacity Cutter head size max. 63 mm End mill size max. 32 mm Rapid traverse speed X-axis 36000 mm/min Y-axis 36000 mm/min Z-axis 36000 mm/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 31 kVA Horizontal milling table Length 900 mm Width 410 mm Projection 480 mm Distance vertical spindle - milling table min. 102 mm Distance vertical spindle - milling table max. 562 mm T-slots size 16 mm Number of T-slots 4 Joygo2 T-slot spacing 102 mm Load capacity max. 350 kg Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Coolant system Number of coolant pumps 3 pcs Coolant pump(s) Drive power 1.27 kW each Tank capacity 210 l Delivery rate 66 - 100 l/min Pneumatic connection Operating pressure 5 - 7 bar Control system Type Sinumerik 828D System software SW 28x CNC memory 8 MB Block change time 1 ms Look Ahead 150 Number of tools 512 Travel distance X-axis automatic 760 mm Y-axis automatic 440 mm Z-axis automatic 460 mm Vertical spindle Spindle holder SK 40 DIN 69871 Speed range 12000 min¯¹ Power drive motor continuous operation S1 9 kW Power drive motor S6-30 % operation 21.2 kW Torque drive motor continuous operation S1 57 Nm Torque drive motor 30% operation S6 135 Nm Feed force Feed force X-axis 3.0 kN Feed force Y-axis 5.5 kN Feed force Z-axis 5.5 kN Feed motor torque X-axis continuous operation S1 7.3 Nm Y-axis continuous operation S1 10.5 Nm Z-axis continuous operation S1 15 Nm Tool changer Double arm gripper design Number of tool positions 24 tools Tool diameter max. secondary positions free 125 mm Tool diameter max. 80 mm Tool length max. 200 mm Tool weight max. 8 kg Options included: PPU 290 Touch Panel 12000rpm inline spindle Chip conveyor Screw design 70 bar IKZ external

Condition: as good as new (ex-display), Year of construction: 2020, Machine is in the exhibition and was only used for demonstration purposes. Optimill F 150 HSC Premium CNC milling machine direct from the manufacturer. F 150 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and long service life. Dimensions and weights Length approx. 3000 mm Width/depth approx. 1950 mm Height approx. 2310 mm Weight approx. 4350 kg Drilling/milling capacity Cutter head size max. 63 mm End mill size max. 32 mm Rapid traverse speed X-axis 36000 mm/min Y-axis 36000 mm/min Z-axis 36000 mm/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 31 kVA Horizontal milling table Length 900 mm Width 410 mm Projection 480 mm Distance vertical spindle - milling table min. 102 mm Brugsz0Tyhm Distance vertical spindle - milling table max. 562 mm T-slots size 16 mm Number of T-slots 4 T-slot spacing 102 mm Load capacity max. 350 kg Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Coolant system Number of coolant pumps 3 pcs Coolant pump(s) Drive power 1.27 kW each Tank capacity 210 l Delivery rate 66 - 100 l/min Pneumatic connection Operating pressure 5 - 7 bar Control system Type Sinumerik 828D System software SW 28x CNC memory 8 MB Block change time 1 ms Look Ahead 150 Number of tools 512 Travel distance X-axis automatic 760 mm Y-axis automatic 440 mm Z-axis automatic 460 mm Vertical spindle Spindle holder SK 40 DIN 69871 Speed range 12000 min¯¹ Power drive motor continuous operation S1 9 kW Power drive motor S6-30 % operation 21.2 kW Torque drive motor continuous operation S1 57 Nm Torque drive motor 30% operation S6 135 Nm Feed force Feed force X-axis 3.0 kN Feed force Y-axis 5.5 kN Feed force Z-axis 5.5 kN Feed motor torque X-axis continuous operation S1 7.3 Nm Y-axis continuous operation S1 10.5 Nm Z-axis continuous operation S1 15 Nm Tool changer Double arm gripper design Number of tool positions 24 tools Tool diameter max. secondary positions free 125 mm Tool diameter max. 80 mm Tool length max. 200 mm Tool weight max. 8 kg Options included: PPU 290 Touch Panel 12000rpm inline spindle Chip conveyor belt version Chip trolley 20 bar IKZ internal

Condition: used, Univ. drilling and milling machine OPTIMUM type Opti F 30 Vario with workbench base Article no. 301 3303, serial no. 684898, year of manufacture 2006 Drilling capacity in steel max. 32 mm Milling capacity with cutter head max. 76 mm Milling capacity with end mill max. 20 mm Travel X: 430 mm, Y: 185 mm, Z: 465 mm Table size 730 x 210 mm with 16 mm T-slots Projection 205 mm Column diameter 115 mm Spindle holder MK 3 Spindle speed 35 - 3300 rpm, infinitely variable Quill stroke 130 mm Motor power 1.5 kW Mains connection 400 Volt, 50 Hz Crnegdagwm - Belt drive with 12 belt speeds - Stepless spindle speed via frequency converter - Right-left rotation for thread cutting - Milling head can be swiveled by approx. 180 - M12 pull rod for clamping the milling holder - Set of collets MK3-M12 with 9 collets - Coolant unit with plastic tank and electric coolant pump - Mounted on a stable workbench (120 x 80 cm, working height of workbench 85 cm) Space requirement machine L x W x H 1150 x 1150 x 1200 mm Machine weight 275 kg Space requirement complete L x W x H 1200 x 1150 x 2050 mm Weight complete approx. 400 kg Good condition

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine Bwkadx3P - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition. Optimill F 200 HSC Premium CNC milling machine direct from the manufacturer. F 200 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profile rail with roller recirculation for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with five T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the running-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Internal spindle cooling with 20 bar - Belt-type chip conveyor ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Enclosed control cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 20 kVA Milling spindle Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Spindle holder SK 40 / DIN 69871 Cooling lubricant system Power of the coolant pumps, 3 pieces 1 kW Delivery rate 35 l/min. Tank capacity 200 liters Cleaning pump Cleaning pump output 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 24 Tool diameter max. 78 mm Brujc30Tqci Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 850 mm Y-axis 500 mm Z-axis 550 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 m/min. Motor torque X-/ Y- / Z-axis 16 Nm / 16 Nm / 20 Nm Feed forces X- / Y- / Z-axis 5.34 kN / 5.34 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 - 8 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 650 mm Table length x width 1,000 x 500 mm T-slot size / number / distance 18 mm / 5 / 100 mm Max. load capacity 500 kg Table dimensions Length x width x height 2,400 x 2,355 x 2,860 mm Total weight 5,500 kg !!!Image optionally with 3D printer, not included in the price!!!

Condition: new, Year of construction: 2021, Drilling/milling machine Make: OPTimill Model: MF 4V Item no.: 3336050 Condition: New machine travels: - X-axis 900 mm - Y-axis 400 mm - Z-axis 406 mm Spindle speed: 9 - 6,750 rpm (infinitely variable) equipped as standard with: - 3-A digital display DPA 21 - Reversing switch right/left rotation - Drilling depth stop - cross table 1.244 x 230 mm (T-slot: 16 mm) with motorized table height adjustment (Z-axis) Bswllsyvlb - chuck guard - Coolant device - Operating instructions

Condition: new, Year of construction: 2022, Power: 750 W / 400 V Drilling capacity steel: 25 mm Speed range: 60 - 3050 rpm Speed levels: 12 infinitely variable levels Spindle holder: MK3 Quill stroke: 95 mm Q978B Spindle projection: 209 mm Table size: 308 mm x 308 mm Quick-action chuck: 1 - 16 mm Weight: 107 kg

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, OPTIMUM Optimill MT 50 universal milling machine TECHNICAL DATA: - Year of construction 2018 - X 580 mm - Y 200 mm - Z 340 mm - Speed 115 - 1750 rpm - Table clamping surface 1000 x 240 mm - SK40 - Quill stroke 120 mm - Total power 4.5 kW - Operating instructions - Space requirement approx. 1.3 x 1.2 x 2.1 m - Machine weight approx. 1000 kg In our opinion, the machine is in very good condition and can be inspected under power by appointment. Loading included. We will help you organize the transport. Dpevbr

Condition: as good as new (ex-display), Year of construction: 2020, +++ EXHIBITION MACHINE YEAR 2020+++ incl. compressed air tool changer ISO 40 incl. mounting adapter and mounting costs +++++ Tool milling machine OPTImill MZ 4S With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable via the control panel. Part number 3346245 Brand Optimum Catalog Directory Metalworking machinesMilling machines conventionalOPTImill MZ 2S / MZ 4S Scope of delivery - Adapter ISO 40/MK3 - Adapter MK1 and MK 2 - Milling spindle horizontal milling Ø 27 mm - Operating tool Description - Versatile application range - Excellent damping properties and stability of the machine frame - All guideways hardened and precision ground and adjustable by means of taper bars - Automatic feed in X, Y and Z axes, continuously adjustable via an electronic joystick on the control panel - Electric feed limit stop - Ball screw in all axes - Central and clearly arranged control panel with integrated digital position and speed display - Massive cross table, large dimensioned and precisely surface machined with 5 T-slots - Coolant device - Large dimensioned handwheels with scale - Machine lamp - Quiet running - Automatic central lubrication Technical data Dimensions and weights Length (product) approx.: 1610mm Bfffeoxdmip width/depth (product) approx.: 1825mm Height (product) approx.: 1885mm Weight (net) approx.: 1890kg Drilling/milling capacity cutter head size max.: 100mm drilling capacity steel (S235JR): 32mm continuous drilling capacity steel (S235JR): 28mm end mill size max.: 25mm Electrical data Power drive motor: 3,75kW supply voltage: 400V Mains frequency: 50Hz Milling table horizontal horizontal milling table length: 900mm Horizontal milling table width: 500mm distance vertical spindle - horizontal milling table min.: 75mm Distance vertical spindle - horizontal milling table max.: 400mm Horizontal milling table T-slots size: 14mm Horizontal milling table T-slots number: 7 Horizontal milling table T-slots distance: 63mm Distance horizontal spindle - horizontal milling table min.: 130mm Distance horizontal spindle - horizontal milling table max.: 390mm Horizontal milling table load max.: 360kg Milling table vertical vertical milling table length: 1200mm Vertical milling table width: 250mm Vertical milling table T-slots size: 14mm Vertical milling table T-slots number: 3 Vertical milling table T-slots distance: 63mm Coolant system Coolant pump(s) Drive power: 95W Travel travel X-axis manual: 600mm travel Y-axis manual: 480mm traverse path Z-axis manual: 390mm Travel X-axis automatic: approx. 510mm Travel Y-axis automatic: ca. 440mm Travel Z-axis automatic: 345mm Vertical spindle Vertical spindle throat: 185mm Vertical spindle spindle mounting: ISO 40 DIN 2080 Vertical spindle speed range: 30 - 2550min¯¹ Vertical spindle rotation range milling head Z - X plane ± 90°. Vertical spindle number of speed ranges: 18steps Vertical spindle tightening rod: M 16 Vertical spindle quill stroke: 120mm Electrical connection Total connected load: 5,4kW

Condition: new, Year of construction: 2024, Precisely processed Clearly arranged control panel with user-friendly foil keypad Safety electrical 24 v version Easy to read digital display for speed and depth Emergency stop pushbutton Motor with two-stage gear for a powerful transmission of engine power Powerful DC motor with permanent flow monitoring Control electronics with integrated relay control Drilling-milling head to ±90 ° tilt, for milling drilling work in every angular position Feed screws clearance adjustable through adjustable spindle nuts Double row angular contact ball bearings in the axis, zero clearance adjustable Drive performance Main motor 0,75 kW Drilling milling capacity Cutterhead size of 52 mm Schaftfräsergröße of Max 20 mm Drilling performance steel (S235JR) 16 mm Dauerbohrleistung steel (S235JR) 12 mm Horizontal router table Length 700 mm Width 180 mm Distance vertical spindle - platen of Max 255 mm T-slot size 12 mm T-slot number 3 T-slot distance 63 mm Rotation 90 ° Load capacity of 50 kg Travel X-axis manual 480 mm Y-axis manual 175 mm Z axis manual 210 mm B8Lcylag Vertical spindle Throat depth 170 mm Spindle mount MT 2 Speed range 100 – 3000 min¯ ¹ Number of speed ranges 2 levels Suit Rod M 10 Quill diameter 60 mm Quill stroke 50 mm Location: Ex-works

Condition: as good as new (ex-display), Year of construction: 2024, Machine is in the exhibition. Optimill F 110 HSC Premium CNC milling machine direct from the manufacturer. F 110 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. - Heavy-duty design - High productivity - High reliability - Heavily ribbed, torsion-free machine base - Profiled rail with recirculating ball bearing for high rapid traverse speeds in all axes - High-torque servo drives in all three axes - Telescopic guideway cover on all three axes - Automatic lubrication - Massive, exact milling table with three T-slots, large dimensions and precision-ground - The portable, electronic handwheel with enabling switch and emergency stop switch makes it much easier to the run-in of programs considerably - Coolant device with chip flushing system and cleaning gun - Chip conveyor in belt design ensures efficient chip removal - Chip trolley - RJ45 plug connection and 230 V power connection - Closed switch cabinet with integrated heat exchanger ensures optimum temperature and prevents the ingress of dirt particles - Machine light in the work area - Additional package SIEMENS material liability for defects and free online/on-site service OSS Plus - 1-year Basic maintenance contract included in D/A/CH Milling spindle Inline spindle Machine data Electrical connection 400 V / ~50 Hz Total connected load 15 kVA Milling spindle Drive motor S1 operation 9 kW Torque drive motor S1 operation 57 Nm Drive motor S6-30% operation 21.2 kw Torque drive motor S6-30% operation 135 Nm Spindle holder SK 40 / DIN 69871 Internal spindle cooling option Drive motor S1 operation 10.5 kW Torque drive motor S1 operation 50 Nm Drive motor S6-30% operation 26.4 kW Torque drive motor S6-30% operation 125 Nm Cooling lubricant system Power of the coolant pumps, 2 pieces 900 W Delivery rate max. 35 l/min. Tank capacity 116 liters Cleaning pump Power of the cleaning pump 530 W Milling accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Tool changer Double arm gripper type Number of tool positions 20 Tool diameter max. 78 mm Tool diameter (secondary positions free) max. 120 mm Tool length 300 mm Brui9Ft7Gba Tool weight max. 8 kg Time tool change: tool to tool 2.5 seconds Travel distance X-axis 650 mm Y-axis 400 mm Z-axis 500 mm Feed drive Rapid traverse X-, Y-, Z-axis 48 / 48 / 32 m/min. Motor torque X- / Y- / Z-axis 11 Nm / 11 Nm / 20 Nm Feed forces X- / Y- / Z-axis 3.67 kN / 3.67 kN / 6.68 kN Speed range Speeds* 12,000 min-1 Pneumatics Air pressure 6 bar Air consumption per hour 6 - 8 kg/m³ Milling table Distance spindle - table 100 - 600 mm Table length x width 850 x 400 mm T-slot size / number / distance 18 mm / 3 / 100 mm Max. load 400 kg Dimensions Length x width x height 2,100 x 2,300 x 2,750 mm Total weight 4,300 kg

Condition: used, Year of construction: 2003, x-travel:930 mm y-travel:400 mm z-travel:406 mm Cglcuz3C00 turning speeds:9-6750 1/min table::1370 x 254 quill stroke:127 mm quill feed:(3) 0,04; 0,08; 0,15 mm/U bore capacity in steel:32 mm feed range:19 - 890 (x) mm/min spindle cone:SK 40 column arm:200 - 680 mm total power requirement:4 kVA weight of the machine ca.:1,15 t dimensions of the machine ca.:1,5 x 1,45 x 2,2 m 3-axis RSF-electronic Z503 digital display, swivelling vertical head +/- 90°, all 3 axes with Feeds, spindle quill (60 mm), switchable spindle brake, coolant system, bore-feed 0.03; 0.12; 0.06 mm/rev. machine light, angled table, extensive accessories (counter bearing, milling spindles with distance rings, tool holders etc.)

Condition: new, x-travel 580 mm y-travel 200 mm z-travel 340 mm speeds 115 - 1750 U/min table surface area 1000 x 240 mm tool taper ISO 40 total power requirement 4,5 kW weight of the machine ca. 820 kg dimensions of the machine ca. 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with microswitch, against flying chips and parts, for the greatest possible protection of the user Scope of delivery: - Gear rim drill chuck 1 - 16 mm / B 18 - Arbor drill chuck ISO40 / B18 - Horizontal milling spindle with counter bearing, disc milling cutter holder Ø22 mm, Ø27 mm - Adapter ISO 40/MK3 - Adapter ISO 40/MK2 - Vertical and horizontal drawbar - T-slot nuts Isvltha - Drifter - Operating tool

Condition: new, Year of construction: 2024, Optimum OPTImill MZ 2S tool milling machine With digital 3-axis position display DP 700 from NEWALL. With inverter drive of the feed axes controllable from the control panel. Versatile application range Excellent damping characteristics and stability of the machine frame All guideways hardened and precision ground and adjustable by means of taper bars Automatic feed in X, Y and Z axes, infinitely adjustable via an electronic joystick on the control panel Electric feed limit stop Ball screw in all axes Central and clearly arranged control panel with integrated digital position and speed display Massive cross table, large dimensioned and precisely surface machined with 5 T-slots Coolant device Large dimensioned handwheels with scale Machine lamp Quiet running Manual central lubrication TECHNICAL DATA Dimensions and weights Length (product) approx. 1239mm width/depth (product) approx. 1168mm Height (product) approx. 1900mm weight (net) approx. 1400kg Drilling-milling head milling head swivel range ± 90 Drilling-milling capacity cutter head size max. 100mm drilling capacity steel (S235JR) 30mm Continuous drilling capacity steel (S235JR) 26mm End mill size max. 25mm Electrical data Power drive motor 2,2kW Supply voltage 400V Mains frequency 50Hz Horizontal milling table Horizontal milling table length 750mm Horizontal milling table width 320mm distance vertical spindle - horizontal milling table min. 75mm distance vertical spindle - horizontal milling table max. 410mm Horizontal milling table T-slots size 14mm Horizontal milling table T-slots number 5 Horizontal milling table T-slots distance 63mm Distance horizontal spindle - horizontal milling table min. 70mm Distance horizontal spindle - horizontal milling table max. 400mm Horizontal milling table load max. 285kg Milling table vertical Vertical milling table length 830mm Vertical milling table width 250mm Vertical milling table T-slots size 14mm Vertical milling table T-slots number 2 Vertical milling table T-slots distance 63mm Coolant system Coolant pump(s) Drive power 95W Travel Travel X-axis manual 400mm Travel Y-axis manual 200mm travel Z-axis manual 335mm Travel X-axis automatic approx. 310mm Travel Y-axis automaticapprox. 160mm Travel Z-axis automatic 295mm Vertical spindle Vertical spindle throat 100mm Vertical spindle Spindle mounting ISO 40 DIN 2080 Vertical spindle speed range 50 - 1890min¯¹ Vertical spindle number of speed ranges 12steps Vertical spindle tightening rod M 16 Vertical spindle quill stroke 120mm Vertical spindle load max. 1100Nm Feed speed Feed speed X-axis 10 - 600mm/min feed speed Y-axis 10 - 600mm/min feed speed Z-axis 10 - 600mm/min Bjpvld3Hbf Electrical connection Total connected load 4kW Motor(s) rapid traverse X-axis power drive motor 0,375kW rapid traverse Y-axis power drive motor 0,375kW Rapid traverse Z-axis power drive motor 0.375kW SCOPE OF SUPPLY: Adapter ISO 40/MK3 adapter MK1 and MK 2 Milling spindle horizontal milling Ø 27 mm Operating tool

Condition: as good as new (ex-display), Year of construction: 2021, Machine is in the exhibition. Optimill F 310 HSC Premium CNC milling machine direct from the manufacturer. F 310 HSC - The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control is characterized by performance, speed, precision and a long service life. Dimensions and weights Length max. 4319 mm Length approx. 3060 mm Width/depth approx. 2286 mm Height approx. 2928 mm Weight approx. 7000 kg Drilling/milling capacity Cutter head size max. 63 mm End mill size max. 32 mm Bxhzrjsb Rapid traverse speed X-axis 30000 mm/min Y-axis 30000 mm/min Z-axis 30000 mm/min Electrical data Supply voltage 400 V Mains frequency 50 Hz Electrical connection Total connected load 40 kVA Total connected load for optional inline spindle 56 kVA Horizontal milling table Length 1200 mm Width 600 mm Distance vertical spindle - milling table min. 100 mm Distance vertical spindle - milling table max. 750 mm T-slots size 16 mm Number of T-slots 6 T-slot spacing 100 mm Load capacity max. 800 kg Accuracy Repeat accuracy ± 0.005 mm Positioning accuracy ± 0.005 mm Inline spindle Speeds 12000 min¯¹ Power drive motor continuous operation S1 20 kW Drive motor torque 96 Nm Power drive motor 30% operation S6 50.3 kW Torque drive motor 30% operation S6 240 Nm Coolant system Number of coolant pumps 3 pcs Coolant pump(s) Drive power 930 / 850 (1 pump) W Tank capacity 520 l Delivery rate 155 l/min Pneumatic connection Operating pressure 6 bar Control system Type Sinumerik 828D System software SW 28x CNC memory 8 MB Block change time 1 ms Look Ahead 150 Number of tools 512 Travel distance X-axis automatic 1050 mm Y-axis automatic 600 mm Z-axis automatic 600 mm Vertical spindle Spindle holder SK 40 DIN 69871 Speed range 10000 min¯¹ Explanation Speed range Please note that the maximum spindle speed must be reduced by approx. 20 % in continuous operation Power drive motor continuous operation S1 11 kW Power drive motor S6-30 % operation 31.4 kW Torque drive motor 30% operation S6 200 Nm Vertical spindle torque Normal operation 70 Nm Feed force Feed force X-axis 6.7 kN Feed force Y-axis 6.7 kN Feed force Z-axis 10 kN Feed motor Torque X-axis continuous operation S1 18 Nm Y-axis continuous operation S1 18 Nm Z-axis continuous operation S1 27 Nm Tool changer Double-arm gripper design Number of tool positions 30 tools Tool diameter max. secondary positions free 125 mm Tool diameter max. 80 mm Tool length max. 300 mm Tool weight max. 8 kg Time tool change chip to chip (C to C) 8.66 s Options included: PPU 290 Touch Panel 12000rpm inline spindle 70 bar IKZ external tank Belt conveyor with chip cart 4th axis preparation Machine leasing possible via Siemens Finance. Liquidity required.

Condition: refurbished (used), Year of construction: 2013, Functionality: fully functional, load capacity: 150 kg, arm reach: 2,700 mm, controller manufacturer: Kuka, controller model: KRC-4, Equipment: documentation/manual, Kuka KR 150 R2700 F extra industrial robot - refurbished and completely tested industrial robot - we can offer you a 6 month component guarantee separately - building year 2013 - control system Kuka KRC 4 - payload 150 kg - working range 2700 mm - complete with cable set and teach panel - good condition - test under power is possible - if you need more robots or other models, please contact us. - we always have many robots in stock Iswkqpi We can offer you the complete installation of the robot into your production. Please contact us if you need more or other robots. We always have many robots of different manufacturers in our stock. We can teach your staff to program robots from Kuka, ABB or Fanuc.

Condition: used, E-Chain hoist, electric hoist, crane GIS/SWF type 150 / F serial no.: 15739 year of construction 1970 lifting capacity 1500 kg hook path 4,5 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines V0Fxl9Gw good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg Bsaarwsymr hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Mileage: 28,677 km, power: 110 kW (149.56 HP), first registration: 05/1991, fuel type: diesel, color: other, axe configuration: 4x4, tire size: 13.00 R20, fuel: diesel, wheelbase: 2,800 mm, driver cabin: day cab, gearing type: mechanical, suspension: steel, loading space width: 2,400 mm, loading space length: 1,950 mm, loading space height: 800 mm, Year of construction: 1991, Condition: used, Equipment: all wheel drive, differential lock, = Additional options and accessories = - PTO = Remarks = General PTO: 309 uur Axles Configuration: 4x4 Structure Tank capacity: 3000 liters View more pictures and video's at Or visit our YouTube channel: Csicbrqt Bart Spierings NL-DE-GB-FR) Govorim po ryccki Para información en Argentina llamar E-mail autobombas. We do our utmost to provide you with the correct information about the vehicle. Nevertheless, no rights can be derived from the information on our website. = More information = Transmission Transmission: 5 gears, Manual gearbox Axle configuration Tyre size: 13.00 R20 Brakes: drum brakes Suspension: leaf suspension Front axle: Differential lock; Steering; Tyre profile left: 60%; Tyre profile right: 60% Rear axle: Differential lock; Tyre profile left: 60%; Tyre profile right: 60% Measures Dimensions (LxBxH): 575 x 245 x 295 cm Weights Empty weight: 6.550 kg Carrying capacity: 4.450 kg GVW: 11.000 kg Max. towing weight: 14.500 kg Functional Extendable superstructure: Yes Interior Number of seats: 3 Environment Emission class: Euro 0

Condition: new, Year of construction: 2022, Oscillation ja / nein ja/nein ja/nein Dqn2Mn tiltable up to Grad Motor output kW Table dimensions mm sanding width mm Weight kg Stock saleYear of manufacture 2022Description:- Separate work table for solid wood and veneer sanding, manually swivelable by 45° or 35°- The stop for veneer sanding can be adjusted to 0,1 mm- Motorized height-adjustable sanding unit- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The welded steel machine stand guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate geared motor for better sanding results- Oscillation can be switched on as required- Abrasion-resistant and highly gliding plastic tracks on the work table surface- Sanding soleplate with graphite coating for a longer service life of the sanding belt- The spring-loaded belt tension automatically compensates for belt length differences- Rubberized and grooved sanding drum- Convenient operation from two sides on the rotating control panel above the machine- Centrally positioned holder for feed unitTechnical data:Dimensions and weightsLength (product): approx.1820mmWidth/depth (product): approx.1050mmHeight (product): approx.1470mmWeight (net): approx.400kgDrive powerPower oscillation motor: 0.38kWSuction connectionSuction nozzle diameter: 150mmWork table(s)Work table length: 1000mmWork table width: 280mmTable swivel: 45 / 35°Electrical dataSupply voltage: 400VMains frequency: 50HzSanding unitSanding belt length: 2640mmSanding belt width: 150mmBelt speed(s): 14m/sOscillation stroke: 20mmSanding surface length: 890mmSanding surface width: 150mmSanding height max.150mmScope of delivery:1x edge sanding machine KSO 150 M F 3 PRO1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmon-board toolmitre fence

Condition: new, Edge sanding machine KSO 150 M F 3 PRO Holzkraft Promotional model from stock -1x sanding belt K100 -5x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm -6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mm -board tool -Mitre fenceDimensions and weights: - Length (product) approx.: 1820 mm Qedpa9V - Width/depth (product) approx.: 1050 mm - Height (product) approx.: 1470 mm - Weight (net) approx.: 400 kg Drive power: - Oscillation motor power: 0.38 kW Suction connection: - Suction nozzle diameter: 150 mm Work table(s): - Worktable length: 1000 mm - Worktable width: 280 mm - Table tilt: 45 / 35 ° Electrical data: - Supply voltage: 400 V - Mains frequency: 50 Hz Sanding unit: - Sanding belt length: 2640 mm - Sanding belt width: 150 mm - Belt speed(s): 14 m/s - Oscillation stroke: 20 mm - Sanding surface length: 890 mm - Sanding surface width: 150 mm - Sanding height max.: 150 mm Subject to prior sale. - new exhibition machine -

Condition: used, Year of construction: 1992, machine/vehicle number: 209, Automatische Fadenheftmaschine - Automatic Sewing machine - Large Size Smyth F 150 LYear 1992 - Serial-No. 0209 Signature size min. 80mm - 135mm Signature size max. 560mm - 340mm Number of Stitch 13 Mech. Speed up to 150 cycles/min. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Jinddais

Condition: used, Year of construction: 2004, turning diameter: 660 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 35 rpm, travel distance X-axis: 580 mm, travel distance Y-axis: 160 mm, travel distance Z-axis: 1,045 mm, total height: 2,600 mm, total length: 3,820 mm, total width: 2,060 mm, overall weight: 10,400 kg, CNC Turning Milling centre with Second Spindle CNC Control Mazatrol PC Fusion CNC 640 MT PRO Turning diameter 550/660 mm Turning length 1016 mm Spindle bore diameter 65 mm Spindle speed 35-5000 R/min X-axis movement 580 mm Y-axis movement 160 mm Z-axis movement 1045 mm B-axis travel 225 ° mm C-axis indexing 360° Spindle nose A2-6 B7Ynfxex Tool Taper Capto C6 Number of tools in magazine 40 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail.

Condition: new, Year of construction: 2023, Oscillation ja / nein ja/nein ja/nein tiltable up to Grad Dqmpmj Motor output kW Table dimensions mm sanding width mm Weight kg Stock saleYear of construction 2023Description:- Sanding unit can be swivelled by hand crank- The machine stand made of welded steel guarantees high torsional rigidity and vibration-free working- Oscillating sanding belt with separate gear motor for better sanding results- Oscillation can be switched on as required- Sanding soleplate with graphite coating for a longer service life of the sanding belt- Height-adjustable sanding table to utilize the entire sanding belt width- Additional table with suction openings for sanding radii on the rubberized deflection roller- Sanding sleeve device with attachable work table- The spring-loaded belt tension automatically compensates for belt length differences- With adjustable stops, ideal for veneer sanding- The grooved veneer stop allows the veneer overhangTECHNICAL DATADimensions and weightsLength (product) approx. 1700 mmWidth/depth (product) approx. 1000 mmHeight (product) approx. 1150 mmWeight (net) approx. 300 kgDrive powerPower oscillation motor 0,11 kWSuction connectionSuction nozzle diameter 2 x 100 mmWork table(s)Work table length 950 mmWork table width 450 mmWork table height adjustment 110 mmElectrical dataSupply voltage 400 VMains frequency 50 HzSanding unitSanding belt length 2640 mmSanding belt width 150 mmBelt speed(s) 14 m/sOscillation stroke 15 mmSanding surface length 800 mmSanding surface width 150 mmSwivel sanding unit 0 - 45°SCOPE OF DELIVERY1x sanding belt K1005x rubber rollers Ø25, Ø30, Ø40, Ø45, Ø50 mm6x sanding sleeves K80 - Ø25, Ø30, Ø35, Ø40, Ø45, Ø50 mmtool kitmitre fence