Folding stoving machine

Paul Scholz Falzeinbrennmaschine

Condition: excellent (used), Catalog number 7386 TECHNICAL DATA - max. blade diameter 500mm - spindle diameter 30mm - hydraulic clamp acts as a blade guard - hydraulic blade stroke - max. cutting width 550mm - 4 sliding rollers in the table - top pulling, toothed, pressing roller - max. cutting height (in the middle) 100mm - main engine 5.9kW - diameter of extraction nozzles 100mm, 120mm - table dimensions 700x630mm - table height from the base 830mm - roller feed table - roller dimension 350mm table dimensions: - length/width 4480x700mm - engine 0.75kW - receiving table (tape) - tape width 510mm table dimensions: - length/width 3130x800mm - engine 0.75kW - machine dimensions length/width/height 890x910x1200mm - total weight approx. 900kg - feeding and receiving table - hydraulically adjustable blade - used saw, very good condition Ncolhcjt E Silocqlop Net price: PLN 24,900 Net price: EUR 5,860 depending on the price of EUR 4.25 (Prices may vary with higher fluctuations)

Condition: ready for operation (used), Year of construction: 1986, Paul Edger, KME 2 Incl. 3 infeed roller tables Incl. chip separator Ncelhccov S Up Esqlep Saw spindle replaced in October 2024! Ready for use!

Condition: used, Year of construction: 1989, General SKU: R0909 Location: Barneveld Make: PaulSchwingelGmbH(DE) Type: 6300ltr. No.: 8880-3 Year of construction: 1989 Pressure Working pressure: 3.2Bar Vacuum possible: ✔ Working pressure jacket: 16Bar Main Features Material: Stainlesssteel Volume: 6300Ltr. Motor: 15KW Ncslhcjvzpg Decqlop Specified Features - Stainless Steel Reactor Reactor: ✔ Capacity: 8560ltr(nett6300ltr.) Vessel sizes: dia.2000x3050mm Dished bottom: ✔ Dished top side: ✔ Manhole: DN600 Top connections: 5xDN150,2xDN250 Outlet: DN150 Half coil jacketed: (350ltr) Max. temperature: -30/200Degr.C With paddle stirrer: "EkatoHWL100-D Motor: 15kW,380Volt,(EX) Speed mixing shaft: 69rpm Stainless Steel Reactors Material: Stainlesssteel1.4435(316L),Stainlesssteel1.4541(321) Information Total height: 4,9M Weight: 5000Kg Floorspace: 2,4x2,4M ATEX compatible: ✔ What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Please visit our Foeth website for more information about this machine.

Condition: new, new spacer rings of different thickness for PAUL KME 2 and BM, with bore 75 mm, new carbide tipped saw blades 300 Ø and 380 Ø x 75 Ø, new CV saw blades hard-chrome plated different Ø Nolhcjh Anyfscqljcp

Condition: used, Year of construction: 1968, Functionality: fully functional, machine/vehicle number: 101668, overall weight: 15,000 kg, For sale: W. Paul Müller eccentric press Manufacturer: W. Paul Müller Maschinenfabrik, Gefrees Year of manufacture: 1968 Model: 15 Machine no.: 101668 Technical specifications: • Pressure capacity: 75,000 kg (75 tons) • Throat depth: 180 mm • Ram strokes: 120 strokes/min • Adjustable ram: 40 mm • Adjustable stroke: 8 - 80 mm • Motor power: 7.4 HP • Voltage: 380 V Drive: • Motor: Conti Elektro Schorch • Type: K 453 16M 90L P33 • Power: 1.1 kW • Voltage: 220/380 V • Frequency: 50 Hz Nolhcsv Sx S Rocqlscp Condition: • Signs of wear • Robust construction, ideal for punching, embossing, and Forming work Price: €2,500 Viewings available by appointment. Please contact us if you're interested!

Condition: used, PAUL Type AO 15 hydraulic under-table cross-cut saw for precise and fast cross-cuts in woodworking. The robust construction and powerful saw unit enable precise cuts with high repeatability. Ideal for sawmills, wood processing, and series production. Saw blade diameter: 500 mm cutting width: max. approx. 600 mm Clearance height: Max. 160 mm roller conveyor: 2,450 mm each Njlhccov Rdqijqlecp

Condition: ready for operation (used), Year of construction: 1993, Functionality: fully functional, 1 complete automatic trimming system Paul 1 used Paul AB920 automatic feeding system consisting of: Transfer table with 1.1 m stroke; 6 m roller table; 9-strand conveyor chain drive Measuring device with 16 measuring points via measuring skids Nelhccoulikmeqlocp • NCD control and control cabinet • Control of the automatic feeding system and the BK/1000 with a saw blade adjustment Selectable: sharp edge / low wane / high wane - alignment centered or along the rear wane • Trimming grid: 48, 60, 80, 100, 120, 140 mm; • 150-400 mm in 1 cm increments • Single-track trimming with manual input of the trimming width 1 used Double Edger BK/1000L Max. cutting height: 125 mm • Feed with dual gear motor • Divided top roller • Hydraulic sawblade adjustment • Motor: 22 kW, 380 V, 50 Hz, 2900 rpm • Motor clamping rails • Fixed riving knife • Splinter separator 865 mm / 6.30 m long with fixed cutting blade and rising tooth chain for max. log length: 5.50 m • Total connected load of the system: 35 kW Saw shaft with new bearings

Condition: excellent (used), Year of construction: 2015, operating hours: 2,500 h, Functionality: fully functional, cutting height (max.): 120 mm, cutting width (max.): 1,000 mm, We will sell a Paul KME2 1000 R edger. The machine worked for 3 years on 1 shift, has traces of use, mechanically it is OK. It passed technical inspection from the Paul company. Clearance 1000mm cutting height 120 control from the panel Ncolhjv N Rv Asccqlep

Condition: used, Year of construction: 1981, Functionality: fully functional, machine/vehicle number: 912, total width: 2,145 mm, total height: 1,938 mm, total length: 1,645 mm, grinding width: 1,300 mm, overall weight: 2,900 kg, power: 17.3 kW (23.52 HP), grinding belt speed: 20,000 mm/s, workpiece height (max.): 160 mm, A wide belt sander is for sale. The machine was operated in a small workshop with 4 carpenters. It is fully functional and ready for use. It can also currently be tested in the workshop. Nslhjvxqzwsccqlecp

Condition: refurbished (used), Year of construction: 2004, MULTIBLADE SAW PAUL, TYPE K34G-OU/1200, ORIGINALLY BUILT IN 2004 2 MOTORS, POWER 22HP AND 45HP Nceljh A N Tmshccqlsp COMPLETELY REBUILT BY COMPANY PAUL IN 2021 price is negotiable

Condition: used, Year of construction: 2000, Functionality: fully functional, CNC full optimization cross-cut saw line PAUL MKL 11 S/N 01 148496 Year of manufacture 2000 Manufactured by Paul Maschinenfabrik GmbH & Co. Paul saw model 11 MKL optimizing and forgiving cross-cut saw: for soft and hard wood Wood input length 800- 4000 mm Wood width 30-180 mm Wood thickness 6-75 mm Nslhccov H Uf Nsqljcp Minimum cross-section 30×15 mm or 45×6 mm Maximum cross-section 130x75 mm or 180×45 mm Shortest sections to be sawn 250 mm Saw blade diameter 500 mm, Saw motor 5.5 kW Saw cycles 0.4 s Saw stroke pneumatic Feed speed max. 200 m/min Conveyor belt length x width L x W 7500×200 mm, belt width 100 mm Measuring station with luminescence and light barrier for wood start and end detection 4 side shifters in the outfeed conveyor belt

Condition: excellent (used), Circular saw flat motor KATT 11 kW / 1450 rpm, flange Ø 200 mm, right-hand thread, second stub shaft for hydraulic pump drive with pulley 150 mm Ø, tested and with new bearings. Nceljh D Rt Ajhccqljp

Condition: used, Year of construction: 1993, machine/vehicle number: 40245-1, Volume: 47,200 l, temperature range: up to 750 C°, working pressure: 19.5 bar, control cabinet with analogue display, air inlet, air outlet, pre-cooling, fan, main cooling, drainage with various piping pumps and valve technology as well as control unit Nelhccqjvziltjlscp

Year of construction: 1992, Condition: ready for operation (used), An OTT wide belt sanding machine is available. Working width: 1350mm, sanding units: 2, feed rate: 4m/8m/min. Including approx. 60x sanding belts. On-site inspection is possible. Nolhccqev Dkcljlecp

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, machine/vehicle number: 10224936, cutting height (max.): 125 mm, overall weight: 1,500 kg, saw blade diameter: 380 mm, cutting width (max.): 750 mm, power of feed motor: 30 W, Paul multi-blade saw with fixed blades is in excellent working condition. Working width - 750mm; Maximum cutting height - 125mm; Compressed air - 6 bar; Blade diameter - 250/380mm; Installed electrical power - 30Kw; Nelhccov A Ukwsqlscp It was purchased new in 2010, and since 2016 it has been put into conservation. I only cut softwood lumber with it.

Condition: like new (used), Year of construction: 2024, operating hours: 80 h, Functionality: fully functional, total width: 700 mm, pressure: 6 bar, Equipment: lighting, We are offering a high-quality AUER pressure blasting system ST 700 PS ID for sale. This powerful blasting cabinet is ideal for industrial applications and impresses with its robust construction, high efficiency and ease of use. Technical details: Model: AUER ST 700PS ID Cabin housing: 3 mm welded steel sheet construction for high negative pressure Lighting: LED lighting (30 watts) protected by safety glass Blasting agent preparation: Integrated sifter for continuous cleaning Working grate: Stable, 250 kg load capacity, painted and easily replaceable Front roller door: Space-saving, ideal for crane loading, with gas pressure dampers Safety: Automatic blasting process interruption when the door is opened Blasting gun: High-performance blasting gun SPA 80 with 11 mm blasting nozzle Compressed air control: Stepless external air regulation, foot switch, pressure control valve (0-10 bar) Filter dust collector model ASP-07: Reduces dust and ensures clean working conditions Sound-absorbing lining Condition & price: Condition: Very good condition, hardly used New price: €16,782 (including accessories) Special features & Advantages: ✅ Robust and durable construction ✅ Perfect for sandblasting and surface finishing tasks ✅ Space-saving design thanks to innovative roller door Nelhccjv A Ewboqljcp ✅ Integrated dust extraction for a clean working environment ✅ Ready for immediate use

Condition: good (used), Year of construction: 1999, Functionality: fully functional, CNC full optimization cross-cut saw line PAUL MKL 11 S/N 99 126515 Year of manufacture 1999 Manufactured by Paul Maschinenfabrik GmbH & Co. (more photos coming soon) Paul saw model 11 MKL optimizing and forgiving cross-cut saw: for soft and hard wood Wood input length 800- 4000 mm Wood width 30-180 mm Wood thickness 6-75 mm Minimum cross-section 30×15 mm or 45×6 mm Maximum cross-section 130x75 mm or 180×45 mm Shortest sections to be sawn 250 mm Saw blade diameter 500 mm, Saw motor 5.5 kW Nslhccetybqpoqlocp Saw cycles 0.4 s Saw stroke pneumatic Feed speed max. 200 m/min Conveyor belt length x width L x W 7500×200 mm, belt width 100 mm Measuring station with luminescence and light barrier for wood start and end detection 6 side shifters in the outfeed conveyor belt Length of the outfeed table 11500mm (with new conveyor belt) Power consumption 11.4 kW Control - software CNC MAXI 4.00 MV Weight approx. 6000 kg

Condition: good (used), Year of construction: 2011, Functionality: fully functional, total width: 2,250 mm, total length: 11,000 mm, total height: 2,550 mm, Autoclave for rotary retreading SCHOLZ year 2011, in good condition, dismantled and stored type of heating: steam (steam generator not included) length: approx. 11000 mm Nolhcjtph H Secqlocp width: approx. 2250 mm height: approx. 2550 mm total weight: approx. 7000 kg internal diameter: 1650 mm cylindrical length: 9500 mm usable length: 24 tires

Condition: used, Year of construction: 1972, machine/vehicle number: 1171, Capacity: 160 ton Throat depth: 350 mm Ram stroke: 20 - 140 mm Slide adjustment: 75 mm Shut height (stroke down, adjustment up): 740 mm Table surface area : 1000 x 680 mm Slide area: 600 x 300 mm Number of strokes: 50 s.p.m. Required power: 15 kW Weight of machine approx.: 12 ton Standard configuration Nelhsuqdwxoccqlocp Machine included: - Fence HS decoiler M 15 / 500 - built in 2009Material width 15 - 500 mmCoil weight 1,5 tCoil exterior diameter 1400 mmCoil interior diameter  380 - 530 mm HS straightener RME 40 - 9 - built in 2009 Material thickness 0,4 - 2 mmNumber of feeding rolls 2 piecesNumber of straightener rolls 9 piecesDiameter of straightener rolls 61,9 mmDiameter of feeding rolls 61,9 mmFeeding speed 40 m / minFeeding length  0 - 9999,99 mm Extended machine accessories The machine was converted to SIEMENS S7 in 2009.

Condition: reconditioned (used), - 2- Paul short tables in front of the double hemmer - Double hemmer KME 2 - 30 KW saw motor - 750 mm passage width - 125 mm cutting height - Fixed and adjustable bushing Ncjlhccjv Abcmoqlop - Slat bushing - Shaking chute under the saw - Hydraulic width adjustment - Spiral roller table - Drive from the double hemmer - 1 piece of separating slat

Condition: used, Paul K34 multi-blade saw for sawing, trimming, ripping or grooving boards. The system is still in operation and can be inspected. Dismantling must take place around the end of September 2025. cutting height: 105 mm passage width: 940 mm Driven rollers: 12 feed: 0 – 80 m/min Njlhevwlcyjccqlscp

Condition: like new (used), Functionality: fully functional, Tool shaft for multi-saw PAUL K34G total length 850mm Nslhccqoqwg Swolscp diameter 100mm

Year of construction: 1988, Condition: ready for operation (used), Three older eccentric presses from various manufacturers are available. The presses were only used sporadically for punching cycle holes in plastic sheets (approx. 350mm/350mm/0.4mm). 1) W. Paul Müller, ExP 25, year of manufacture: 1970, pressure capacity: 25t, throat depth: 190mm, strokes: 120/min, slide adjustment: 50mm, stroke adjustment: 0mm-60mm, motor power: 2hp. 2) L. Schuler PE 25/250, year of construction: 1988, throat depth: 250mm, table dimensions X/Y: 500mm/465mm, ram dimensions X/Y: 180mm/200mm, stroke adjustment: 8mm-60mm, ram adjustment: 50mm, motor power: approx. 1.4kW, weight: approx. 1600kg. 3) Eisenwerk Hensel, compressive force: 25t, stroke adjustment: 72mm. Documentation available. On-site inspection is possible. Individual sale not possible. Nslhccsu Nlk Eoqlscp

Condition: reconditioned (used), - 2- Paul short tables in front of the double edger - Double edger KME 2 - 30 KW saw motor - 750 mm passage width - 125 mm cutting height - Fixed and adjustable bush - Slat bush - Shaking chute under the saw - Hydraulic width adjustment - Spiral roller table - Drive from double edger - 1 STK separating slat - roof chain conveyor - 5 discharge lines Ncelheu Stpuoccqlop - Board sorting - incl. alignment roller conveyor - mechanically adjustable length sorting

Condition: used, Extra heavy-duty roller edger Paul S 900 / R. for re-cutting unedged boards or similar tasks with several saw blades including mechanization. The exact scope of delivery of the mechanization is to be agreed. The system is still in operation and can be inspected. Dismantling must take place around the end of September 2025. cutting height: 180 mm passage width: 900 mm Driven rollers: 6 Nelhccjvvutroqlscp engine: 75 kW