Hydr. profile and bar shear

Peddinghaus Peddimaster 80/110

Condition: used, Year of construction: 1990, Max. punching capacity: 600 kN Max. shear force: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Large support table on punching side with stops Further technical data on request With a range of punches and dies as desired Bnwgj7Udnhe Weight: approx. 2,000 kg

Year of construction: 1991, Condition: used, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Punching depth: 510 mm Hole 31 in 25 mm Flat steel: 500 x 22 mm Hydraulic hold-down device for the flat steel knife Square notcher Weight: approx. 5000 kg 3Plg2Ux9

Year of construction: 1990, Condition: used, Max. punching capacity: 600 kN Max. shearing capacity: 800 kN Punches 27mm holes in 16mm steel Shears on the flat steel shears to 400 mm up to a material thickness of 16 mm steel E09Olwkq Hydraulic hold-down device on flat steel shears Further technical data on request With a range of punches and dies as desired Weight: approx. 2,000 kg

Condition: used, Functionality: unexamined, Machine/vehicle number: 4423255991003, We are selling a punching machine from the company Peddinghaus from Gevelsberg/Germany with the name "Peddingmaster 80/110". D7Tvkno Dimensions: Length 2.00m x width 0.90m x height 1.80m

Condition: excellent (used), Functionality: fully functional, Machine/vehicle number: 4423258292010, Length stop: 1,000 mm, Equipment: Documentation/Manual, Type Plate Available, A used, very well-preserved steel profile shear from PEDDINGHAUS equipped with: - Punch quick clamping system Doxuiv - Universal punching saddle (gooseneck) - Square notcher with material support table, - Electrical length contact - Angle steel blade in the profile steel shears - Flat steel shears - Shearing capacity 80 tons Tech. Data and dimensions: Errors excepted. Further tech. Data see pdf. document

Condition: ready for operation (used), Year of construction: 1987, Available immediately from location : Peddinghaus profile steel shears with hole punch Type Peddimaster 60/100 H year of construction 1987 Pressure capacity 60 to Outreach 510 mm Drive 7,5 kw Weight 3.5 to Uaniaikoyt Round steel 45 mm Square steel 40 mm Angle steel 120 x 13 mm Flat steel 500 x 12 mm Cutting area 500 x 12 or 400 x 16 mm Punching diameter 27 in 17 mm steel Punching diameter 39 in 12 mm steel Many punching tools At a price of Euro 3.750.---plus VAT ex location

Condition: used, Year of construction: 1988, round bar steel 45 mm square edge steel 40 x 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm Punch power 600 kN hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) 27 x 17 mm hole punching press: capacity (dia. x thick.) 39 x 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t Dpqy0J dimensions of machine L x W x H 1,80 x 0,90 x 1,80 m - hydraulic - Accessories: tool cabinet with various punches and dies, length stop 1850 mm with limit switch

Condition: used, Year of construction: 1986, round bar steel - mm square edge steel - mm L-beam 120 x 13 mm hole punhing press: pressure 60 t hole punching press: throat 510 mm hole punching press: capacity (dia. x thick.) Ø 27 in 17 mm shear: flat material 500 x 14 mm shear: flat material 400 x 16 mm shear: flat material 180 x 20 mm Boofufhzfw shear: flat material 120 x 21 mm shear: flat material 100 x 22 mm total power requirement 7,5 kW weight of the machine ca. 2,5 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic Section Shear - Combined

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 65/80 mm -Type: 441215124701 Dvaihe -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Condition: used, Max. punching capacity: 600 kN Max. shearing power: 1000 kN Bi8Uudlgzoc Punches 20mm holes in 19mm steel Shears on the flat steel shears to 500 mm up to a material thickness of 12 mm steel Further technical data on request With a range of punches and dies as desired

Year of construction: 1984, Condition: used, round bar steel 45 mm square edge steel 40 mm L-beam 120 x 13 mm flat steel 500 x 12 mm punching pressure 60 t throat 510 mm 500 x 12 oder 400 x 16 mm punch diameter 27 in 17 mm punch diameter 39 in 12 mm oil volume 80 l total power requirement 7,5 kW weight of the machine ca. 2,4 t dimensions of the machine ca. 1,8 x 0,9 x 1,8 m Hydraulic machine with 5 stations so punching, notching, shearing flat iron, Bu0Pp2Gogl angle iron, solid material, punching with hand lever, profile steel side with foot switch. Punching discharge: 510 mm! All performance data refer to a material strength of 450 N / mm². Electric 380 volt

Condition: used, Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for U-steel: 80 mm Mdkld -Type: 441215124701 -Type: 441215124702 -1x dimensions: 215/205/H30 mm -1x dimensions: 210/220/H30 mm -Weight: 19 kg

Condition: used, Iron worker, punch press and section shear Model: Hydraulic Manufacturer: Peddinghaus Type:&nbsp Peddimax 801 Capacity: 80 ton Punching-capacity: round-31mm in 25mm - round-100mm in 7,5mm Shear-capacity round: 50+25mm Shear-capacity beam: 45+30mm Shear-capacity flat: 500x18 - 300x22 Notching: 65x85x13mm Motor-power: 7,5kW Bwxwcydzyu Incl. positioning punching Tested and fully functional. Machine-weight: 3000kg Machine-dimensions: 2150x1900x2100mm

Year of construction: 1988, Condition: used, Ja Blszhi00Nnu Stanzkraft 800 kN frequency 50 Hz current 17/11 A voltage 220/380 V round bar steel 32-17 mm square edge steel 30-18 mm 100 x 10 mm flat steel 350 x 16 mm throat 200 mm work height max. 1107 mm total power requirement 4 kW weight of the machine ca. 1,5 t dimensions of the machine ca. 1200 x 700 x 1850 mm

Condition: used, Bench vise, locksmith vise, parallel vise -Jaw width: 150 mm -Span width: 200 mm -Number: 2x vices available -Price: per piece Cnwzv2Gy -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: excellent (used), Machine/vehicle number: 4077953297009, Max. Punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears 300 mm to 12 mm steel on the flat steel shear Bhst0Kfbzhe

Year of construction: 1995, Condition: used, Max. punching and shearing capacity: 380 kN Punches e.g. 30 mm holes in 10 mm steel Shears on the flat steel shears to 300 mm to 12 mm steel Further technical data on request With a range of punches and dies as desired Cty28Ctder

Condition: new, punching pressure 28 t punching cross-cut in cmm 31 in 7 mm round bar steel 32,0 mm throat 250 mm dayligth 223 mm no. of strokes 10 - 30 Hub/min oil volume 32 ltr. work height max. 1.033 mm total power requirement 3,0 kW weight of the machine ca. 553 kg. dimensions of the machine ca. 730 x 540 x 1530 m Ciqu8M2Wkm Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amps are not included in the scope of delivery

Condition: used, pressure 80,0 t punching cross-cut in cmm 31,0 in 25 mm shear: flat material 500x18 / 300x22 mm L-beam 150 x 12 mm round bar steel 50 + 25 mm square edge steel 50 + 30 mm throat 510 mm blade length 500 mm work height max. ca. 1.100 mm total power requirement 7,5 kW Cyjgjefsje weight of the machine ca. 3200 kg dimensions of the machine ca. 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German

Condition: good (used), Machine/vehicle number: 550C08, A used punching PEDDINGHAUS with large throat and large plate with attacks Cutting capacity 45 tonnes Stroke rate 40 strokes/min Behxzcf90P Projection 762mm Arbeitshöte 1110mm

Condition: used, Punching force: 500 kN Material thickness: can punch a 20 mm hole in 18 mm steel D7Vceao Drive: Activation of the stroke via foot switch Table size: Large support table Slight defect on the cover (bent) Weight: approx. 1150 kg

Condition: used, Year of construction: 1976, Reinforcing steel bending machine, shaft bending machine, round steel bending machine -Condition: Machine is in very good condition (was only used for training) -max bending capacity: Ø 32 mm -Drive: 1.3/2.1 kW -Bending angle: pin controlled, two-speed, each with pins for left/right to adjust the angle -Equipment: adjustable counterholder bars, standard bending tool -Dimensions: 750/660/H970mm -Weight: 356 kg Cypoa0Xgtl

Condition: like new (used), Functionality: fully functional, Hydraulic punching machine + profile steel shears Manufacturer: Peddinghaus Type: Peddimax 602 Year of manufacture: approx. 1999 Condition: used, very good Punching force: 60 t Rated power: 7,5 kW Hole punching: Ø 31 in 15 mm Square steel: 40.0 mm Angle steel: 160 x 80 mm Dpsn79 Flat steel: 400 x 16 mm throat depth: 400 mm Weight: approx. 1.95 t Dimensions: approx. 1.7 x 1.05 x 1.98 m Accessories - Tool package approx. 60 pcs.

Condition: used, round bar steel div mm square edge steel div mm L-beam div mm No. 2984: 1 used plate, profile and bar shear with notcher 50 to manufactured by PEDDINGHAUS, type 210 / 13 Standard, built 1965 No. 3418: 1 used combined section shear 80 tonnes manufactured by PEDDINGHAUS, type 210 Super 16, built ca85 Cuonnbjt0a No. 3668: 1 used steel section shear + punching machine 95 to PEDDINGHAUS, type 210 Super 20, year of construction 1978 C93Hs0Y Space requirement 2.20 x 1.00 x 2.35 m, weight approx. 4.5 tonnes No. 3286: 1 used steel profile shear 65 to MUBEA / MUHR & BENDER, type KBL 16 N No. 1096 1 used hole punch 26 to EDEL SMO 26, various accessories

Condition: like new (used), 80 posts for fence height 1830 mm, color: anthracite RAL 7016, dimensions: 2,400 x 60 x 40 mm, for setting in concrete, clamping plates, screws, post caps, packed on a pallet C93Jpje