Universal lathe

Poreba TR 135B x 4000

Condition: used, functionality: fully functional, turning diameter over cross slide: 1,100 mm, spindle bore: 220 mm, turning diameter: 1,500 mm, turning length: 7,000 mm, Tacchi FTC Lathe with 7,000 mm between centers Description Manufacturer: Tacchi Model: FTC Capacities: Distance between centers: 7,000 mm Swing over bed: 1,500 mm Swing over cross slide: 1,100 mm Swing over gap: 1,850 mm Gbodpfowulimox Abpjw Spindle bore diameter: 220 mm Speeds: 8 speeds from 24 to 485 rpm Rapid feeds: Rapid traverse on both carriage axes Equipment: 3 fixed steadies and 1 movable steady 4-jaw chuck Ø 1,000 mm mounted on the lathe Additional heavy-duty 4-jaw chuck Ø 1,200 mm General condition: Lathe in good condition

Condition: ready for operation (used), chuck outer diameter: 6,000 mm, controller model: Siemens/Heidenhain, empty load weight: 220,000 kg, Type: SD 600/6500 4 assen gerichte, kogelomloopspindels tussen kolommen: 6500 mm maximaal hoogte onder dwarsbalk: 4270 mm verticale beweging van de dwarsbalk: 2500 mm maximaal gewicht op tafel: 160 ton koppel van de tafel: 30.000 MKP, 200 PK Verticale beweging van Z1 Z2: 1750 mm Twee onafhankelijke schaarliften aan elke kant van de draaibank, met bedieningseenheid Gjdpfx Aswaiuqebpebw Max turningdia -- passage: 6500 mm Power on the spindle: 200 HP Max hight of workpiece Z-axis: 4270 mm Number of speeds: 1 > 40 rev/min Long: 20 500 mm Wide: 8500 mm Height: 6290 mm (above ground-level)

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 6,000 mm, total length: 8,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/6M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 6.000 mm Gbodpjv Ab Dqsfx Abpsw - turning diameter over bed: 1.550 mm - turning diameter over support: 1.220 mm - turning diameter in bridge recess: 1.880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 8.500 mm width: 2.130 mm height: 1.550 mm total weight: 14.100 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post - Standalone chip and splash protection back wall over the whole machine length - inverter in the E-cabinet with slow-start-function and 1 x stepless potentiometer controller

Condition: good (used), Year of construction: 2009, pressure: 330 bar, operating pressure: 330 bar, Hammelmann HDP 77 stationary high-pressure pump unit on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 77 Operating pressure: 330 bar Gbsdpfjrzuwmsx Abpew Delivery rate: 59 l/min. Drive speed: 1500 rpm. Drive power: 37 kW with Siemens 1LA6223-4AA60 electric motor 45 kW with pressure control valve, with safety valve, with oil cooling system. Dimensions LxWxH: approx. 1,450x750x1,150 mm Weight: approx. 600 kg Year of construction: 2009 Condition: In good used condition.

Condition: refurbished (used), Year of construction: 1990, functionality: fully functional, feed length X-axis: 1,400 mm, feed length Y-axis: 630 mm, feed length Z-axis: 500 mm, travel distance X-axis: 1,800 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 450 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 1,800 rpm, quill travel distance: 100 mm, rapid traverse X-axis: 4 m/min, rapid traverse Y-axis: 4 m/min, rapid traverse Z-axis: 1 m/min, total height: 2,500 mm, total width: 3,350 mm, total length: 3,060 mm, table width: 630 mm, table length: 1,800 mm, position of the milling head: VERTIKÁLNÍ/HORIZONTÁLNÍ, type of input current: three-phase, table load: 1,500 kg, overall weight: 6,500 kg, FGS 50/63 - TOS KUŘIM Knee-Type Milling Machine Horizontal/Vertical Axis Milling New Electrical Cabinet + Push-Button Panel Digital Axis Readout System Completely Overhauled in 2025 Warranty: 12 months Availability: Immediately in stock CONDITION OF A NEW MACHINE – FULL REBUILD WITH GEOMETRIC ACCURACY PER MANUFACTURER SPECIFICATION FGS 50/63 – Technical Specifications: Basic machine data: Manufacturer: TOS Kuřim Overall length: 3,060 mm Overall width: 3,350 mm Overall height: 2,500 mm Total weight: 6,500 kg Total power input: 23 kVA Working range: Longitudinal travel X-axis: 1,400 mm Transverse travel Y-axis: 630 mm Vertical travel Z-axis: 500 mm Gjdpfexpugnex Abpebw Working spindle: Spindle taper: ISO 50 Number of speeds / speed range: 18 / 35.5 – 1,800 rpm Spindle motor power: 15 kW Max. spindle torque: 2,500 Nm Feed range X – Y / Z: Number of steps / range: 16/ 10 – 1,800/ 2.5 – 450 mm/min Rapid traverse: 4,000/1,000 mm/min Table: Table area (width x length): 630 x 1,800 mm Max. table load (along axis): 1,500 kg

Condition: used, Side channel compressor, side channel blower, vacuum pump, blower, dust extraction fan, exhaust gas extraction, welding fume extraction, suction, fan, pressure blower, vacuum blower, low pressure fan -Pressure blower: High pressure blower with transport rollers -Motor: elsto Type:ES 160M2A-40 H -Motor power: 11 kW / 2900 rpm -Volume flow: m³/min -Connection input: Ø 185 mm -Connection output: Ø 160 mm -Base plate: 800 x 250 mm Gbjdpfx Absrh Nitepow -Dimensions total: 1260/920/H1170 mm -Weight: 161 kg with pallet

Condition: used, Year of construction: 1987, turning height: 5,000 mm, workpiece weight (max.): 80,000 kg, turning diameter: 5,000 mm, Technical data Gjdpfeu R Etpox Abpebw SIEMENS SINUMERIK 840 Dsl control system Main dimensions and travels Face plate diameter 4,000 mm Rotation diameter (max.) 5,000 mm Workpiece height (max.) 5,000 mm Total height of the machine 9,250 mm Maximum workpiece weight 80,000 kg Table base Y Horizontal table displacement 2,500 mm Cross beam Vertical adjustment of the cross beam in 50 steps 3,200 mm Crossbeam support (right) Horizontal adjustment of support - 2740 + 2740 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool positions 0 without vertical support (left) Lateral support (right) Vertical adjustment of support -25 + 2170 mm Horizontal displacement of the chisel slide 1,000 mm Cross section of the chisel slide 250x210 mm Turning diameter max./min. 4,500/2,500 mm Tool changer Main drive: Power of the main motor 100 kW Speed range of the faceplate 0.63 - 63 rpm Maximum torque on the faceplate 160 kNm Drilling and milling drive side support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Connected loads of the machine Connection Voltage of the machine 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW

Condition: used, Year of construction: 1987, functionality: fully functional, turning height: 3,000 mm, workpiece weight (max.): 50,000 kg, turning diameter: 4,000 mm, Technical data Siemens Sinumerik 840 DSL control system Main dimensions and travels Face plate diameter 3,500 mm Rotation diameter (max.) 4,000 mm Workpiece height (max.) 3,000 mm Total height of the machine 7,250 mm Gbodpfx Abeu R D Tnspew Maximum workpiece weight 50,000 kg Table base Y Horizontal table displacement 2,000 mm Cross beam Vertical adjustment of the crossbeam in 50 steps 1,500 mm Crossbeam support (right) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool positions Cross beam support (left) Horizontal adjustment of support -25 + 2170 mm Vertical displacement of the chisel slide 1,800 mm Cross-section of the chisel slide 250x210 mm Tool changer without side support (right) Main drive: Power of the main motor 100 kW Speed range of the faceplate 1-100 rpm. Maximum torque on the face plate 100 kNm Drilling and milling drive vertical support: Power of the drive motor 22.5 kW Maximum torque 900 Nm Without drilling and milling drive side support Total weight Connection values of the machine Machine connection voltage 380 Volt / 50Hz Control voltage 220V AC / 24V DC Total connected load 150 kVA Required back-up fuse 400 A Equipment and accessories: Operator platform Chip conveyor Cooling lubricant system Tool changer Tool measuring probe RENISHAW