Portable winch hunting & off-road kit ASSORTMENT - 1 piece

Portable Winch

Condition: new, Open up new possibilities! This new kit enables the installation of lines with a larger diameter, up to 10 mm, such as: Low-voltage cables for outdoor lighting Power cables Cat6 telecommunications cables Coaxial cables Control cables and many others, with a diameter of up to 10 mm. The retrofit kit includes: Cable guide Guide roller Tsdpfx Ae Adiqnei Tod Sliding foot with a wider slide Like most of our 600MH accessories, it can be installed on all machines manufactured since 2016.

Condition: new, Would you like to use reels with up to 1000 m of cable for the installation of lawnmower robots? Would you like to install low-voltage cables for outdoor lighting? With this improved, now width-adjustable bracket, you can now also mount oversized reels on the 600MH. It also includes a 450 mm threaded rod, hubs for 1000 m cable reels, and a set of hubs for low-voltage cable reels. The hubs and spacers supplied with the 600MH can also be used in combination with these to accommodate different reel sizes. A lockable clamping handle is included, allowing for good control over the cable unwinding process. Tjdpj Adiqhefx Ai Tsd

Condition: new, Complete conversion kit to upgrade an older model of the Portable Winch PWM600MH for use with 6 mm cable. Todpfx Aij Adiqbj Tod

Condition: new, Very robust, hardened special cutting blade 6 mm wide Made from high-strength carbide steel Tsdpfx Aio Adipwe Ted Very wear-resistant Specifically designed for stony, hard, and highly compacted soils Part number in the spare parts list: 10-0354

Condition: new, COMPLETE STARTER SET WITH TWO BATTERIES AND CHARGER COMMERCIAL MODEL, FOR PROFESSIONAL CABLE LAYING The cable laying machine can lay up to 600 meters of wire per hour. The revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its narrow turning radius, the PWM600MH lays the cable right into the corners. Its ergonomic, adjustable, and laterally pivoting multi-position handlebar allows the user to install the cable even under hedges, shrubs, and low branches! The high level of operating comfort is complemented by the drive, powered by a 4-stroke engine from Honda. The PWM600MH cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the machine using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawn robot does not have to worry about the cable being accidentally cut. The easy-to-change, hardened steel blade cuts through any type of soil, whether normal, compacted, or stony. The sliding foot reduces dirt deposits on the blade and drive shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH, which is why it is the most efficient machine on the market! - Complete set incl. 2x 82V/5 Ah lithium-ion batteries (PCA-0203) and matching quick charger (PCA-0231) - Motor: 1 kW electric motor for 80/82 Volt lithium-ion batteries - Speed: Three speed levels up to 14 m/min - Running time with one 9Ah battery charge up to 30 min. or up to approx. 420 m - Blade: Sturdy carbide blade for all soil types - Laying depth: 4 – 6 cm - Handle: Infinitely adjustable, laterally offset handlebar - Cable: up to 6mm diameter, boundary wire from any manufacturer of lawn robots can be mounted Todpfx Aj Adipqji Tsd - Wheels: Lug tires 4.10" x 10" - Weight: 36 kg - Dimensions: 56 cm x 46 cm x 125 cm (packing dimensions: 62 cm x 62 cm x 48 cm – 39 kg)

Condition: new, COMMERCIAL-GRADE, FOR PROFESSIONAL CABLE LAYERS BASE UNIT WITHOUT BATTERY & CHARGER! This cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH-Li lays the cable right into the corners. Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low branches! The high level of operating comfort is complemented by the drive system, powered by a 1 kW electric motor for 80/82V lithium-ion batteries. The PWM600MH-Li cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the device using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawn robot does not have to worry about accidentally severing the cable. The easily replaceable, hardened steel blade cuts into any type of soil, whether normal, compacted, or stony. The glide foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH-Li, which is why it is the most efficient machine on the market! Motor: 1 kW electric motor for 80/82 volt lithium-ion batteries* Speed: Three speed levels up to 14 m/min Operating time with one 9Ah battery charge up to 30 min or up to approx. 420m Blade: Stable carbide blade for all soil types Close-to-edge working - possible down to 15 cm Incl. spacer, adjustable from 15 to 45 cm Laying depth: 4 – 6 cm Handle: Infinitely adjustable, laterally offset handle Cable: up to 6mm diameter, boundary wire from any lawn robot manufacturer can be mounted Wheels: Lug tires 4.10" x 10" Weight: 36 kg Todpfx Ao Adipkji Tjd Dimensions: 56 cm x 46 cm x 125 cm (Packing dimensions: 62 cm x 62 cm x 48 cm – 39 kg) *This item is the base unit without batteries & without charger! If you would like a complete set incl. 82V/5 Ah battery & charger, please order the item "PWM600MH-LI-SET". Single 82V/5Ah battery: PCA-0207 Suitable quick charger: PCA-0231 Boundary wire not included! Optional accessories may be required for some cable spools/cassettes. Warranty: 1 year limited for commercial use 2 years for proven private purchase/use

Condition: new, COMMERCIAL APPLICATION, FOR PROFESSIONAL CABLE INSTALLERS The cable laying machine can lay up to 600 meters of wire per hour. Its revolutionary design offers high productivity and profitability! Due to its small size and weight, it can be easily transported from one location to another! Thanks to its maneuverability, it is able to lay wire from all robot manufacturers. With its tight turning radius, the PWM600MH lays the cable even into corners. Its ergonomic, adjustable, and laterally pivoting multi-position handle allows the user to install the cable even under hedges, bushes, and low-hanging branches! The high level of operating comfort is complemented by the drive, powered by a 4-stroke engine from Honda. The PWM600MH cable laying machine was developed by professionals to shorten the user's working time through its numerous features. Boundary wire from almost all manufacturers can be attached to the machine using the various rollers and adapters. Thanks to the laying depth of 4 to 6 cm, the owner of a lawnmower robot does not have to worry about the cable being accidentally cut. The easy-to-change, hardened steel blade cuts into any type of soil, whether normal, compacted or stony. The sliding foot reduces dirt deposits on the blade and gearbox shaft and prevents tearing of the turf. These are just a few of the features of the PWM600MH, which is why it is the most efficient machine on the market! New 2020 Model NEW: Multi-Position ANTI-VIBRATION HANDLE - Vibration reduced by 40% NEW: CHEVRON lug tires - improved traction in wet conditions Mount for all common cable drums Hardened steel blade made of carbide steel, 6mm wide, can be used on both sides (PWMA-0008) Close-to-edge working - only 15 cm distance required Incl. spacer, adjustable from 15 to 45 cm Boundary cables up to 6 mm diameter Engine: HONDA GXH-50 2.1 HP – 4-stroke Speed: up to 15 m/min Laying depth: 4 – 6 cm Infinitely adjustable, laterally offset handle Cable: Install cables from any manufacturer of lawnmower robots Wheels: Lug tires 4.10" x 10" Weight: 34.1 kg Dimensions: 56 cm x 46 cm x 125 cm (Package dimensions: 62 cm x 62 cm x 48 cm, 39 kg) Incl. 1x special blade made of carbide steel (PWMA-0008) Warranty: Tjdpfj Adipdex Ai Tod 1 year limited Engine: Warranty terms from Honda International

Condition: new, Description The Portable Winch PCW5000-A offers a robust design and high durability. Equipped with a powerful GXH50 four-stroke engine, it provides a constant pulling speed of 12 meters per minute and a pulling force of up to 1,000 kg. For faster operation, an optional drum with an 85 mm diameter is available, increasing the pulling speed to 18 meters per minute. The PCW5000 allows for pulling loads without power loss and can even handle up to 5,000 kg with a block and tackle system. It requires lead-free gasoline with 86 octane or higher and offers direct drive without a clutch. Todpo Adh I Sefx Ai Ted Included in the range: 1x PCW5000: Portable winch with Honda gasoline engine, max. pulling force 1000 kg 1x PCA-1215M: Polyester rope 12 mm x 50 m, 3300 kg MBS (Minimum Breaking Strength) 1x PCA-1360: "ROPEWIZER" high-performance fairlead for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1274: Stainless steel pulley 90 kN MBS, for 6-13 mm ropes 2x PCA-1276: Oval steel locking carabiner, MBS 25 kN 1x PCA-1281: Rope end hook with safety, MBS 750 kg 1x PCA-1260: Polyester sling 60 mm x 2 m, MBS 2180 kg 1x PCA-1350: Polyester round sling - 2.50 m

Condition: new, Description The Portable Winch PCW4500-A is a 9-piece set featuring a powerful 2-stroke gasoline engine from Maruyama, Japan. It is distinguished by a unique stainless steel rope brake and a centrifugal clutch, which provide better control and safety during operation. The protective plate adjusts to the foot when starting, and the pull rod on the attachment hook prevents the rope from tangling. This device is specifically designed for professional users who value ease of use and safety. The rope brake is exclusively designed for this model and simplifies engine starting as well as controlling the throttle and clutch. Included in the set: 1x PCW4500: Winch with 2-stroke gasoline engine, max. pulling force 1200 kg. 1x PCA-1205M: Polyester rope 10 mm x 50 m, 2200 kg breaking strength 1x PCA-1360: "ROPEWIZER" high-performance thimble for ropes with Ø 10-12 mm 1x PCA-1255: Rope bag - Small - Ø26 cm x H36 cm - for 50 m / 12 mm rope 1x PCA-1275: Stainless steel pulley 60 kN breaking strength, for 6-10 mm ropes 2x PCA-1276: Oval steel locking carabiner, 25 kN breaking strength 1x PCA-1281: Rope end hook with safety catch, 750 kg breaking strength Tjdj Adh I Eepfx Ai Ted 1x PCA-1260: Polyester sling 60 mm x 2 m, 2180 kg breaking strength 1x PCA-1350: Polyester round sling - 2.50 m

Condition: new, New product! Available from July 2024 - Pre-order now! PCW4500 - 2-stroke gasoline-powered portable winch Equipped with the CER500W engine from Maruyama, a commercial 2-stroke engine for professional use, offering an impressive pulling force of 1,200 kg. The STRONGEST winch from Portable Winch! The very first model with a 2-stroke engine in the product line. The Maruyama engine, with its 5-year warranty, makes it the most reliable on the market. With an incredible direct pulling force of 1,200 kg (2,650 lb) and a maximum pulling force of up to 6,000 kg (13,250 lb) when using 2 double pulleys. Equipped with a unique stainless steel cable brake (progressive capture system) that holds the load in place, a centrifugal clutch ensures better control, a protective plate adjusts to the foot when starting, and the pull bar on the swivel hook prevents the cable from tangling. The PCW4500 was designed for professional users who want to be convinced by the easy operation and safety of the device. Todpfx Ae Adh Ixei Tsd - 2-stroke commercial quality engine from Maruyama Japan - Centrifugal clutch and stainless steel cable brake - Fuel: the same gasoline-oil mixture as for a chainsaw (see manual for more details) - Drum size: 76 mm *Note: The cable brake of the PCW4500 cannot be installed on any other winch. The device was specially developed for this model to facilitate the starting of the 2-stroke engine and to integrate the throttle and clutch control, which is not possible with direct-drive winches. DIRECT PULLING FORCE 1,200 KG DOUBLE PULLING FORCE (when using a block and tackle pulley) 2,400 KG WEIGHT 13 KG SPEED 12.2 m/min ENGINE MARUYAMA CER500W - 50cc, air-cooled 2-stroke gasoline engine, 360° tiltable GEARBOX Gearbox made of alloyed aluminum. Heat-treated 3-stage spur gear. Shafts with ball bearings. Oil bath lubrication GEAR RATIO 200:1 CLUTCH Type: Centrifugal clutch BRAKE Operation with: automatic quick-release retaining brake Roller bearing with backstop DIMENSIONS 43 cm x 33 cm x 29 cm DRUM Ø 76 mm CABLE RECOMMENDED Low-stretch double-braided polyester Length: Unlimited Minimum diameter: 10 mm Maximum diameter: 12 mm INCLUDED: Polyester sling 60 mm x 2.5 m