Swivel bending machine 74.30 CNC

RAS 74.30

Condition: like new (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 107/50, The machine is in fully operational condition. Multibend 2000 RAS 74.30 folding machine by RAS Reinhardt Maschinenbau GmbH — a universal folding machine with a swing beam, CNC control, a wide selection of segmented tools, and a working length of 3200 mm, designed for bending steel sheet (400 MPa). A manual or intelligent crowning system is integrated directly into the folding beam to ensure precise and uniform bends along the entire length. Elastic deformations of the folding beam depend on the sheet thickness, strength, properties, processed length, and positioning on the support beam. Sensors integrated into the folding beam detect its actual deflection during the first 10 degrees of bending, and the system sends commands to the actuators, which adjust the convexity of the beam, thus compensating for beam deflection. The control system stores all parameters for each new bend and uses them for subsequent operations. The bend line is always perfectly straight with the set radius, regardless of the metal thickness, length, ductility, strength, or the height and positioning of segments in the bending zone on the beam. Technical specifications: Working length: 3200 mm Max. sheet thickness: 4 mm Minimum bending radius: 1.25 mm × sheet thickness Minimum flange height: approx. 6 mm × sheet thickness Max. opening width of upper beam: 400 mm Adjustment range of folding and lower beam: 80 mm Bending angle: 0–180 degrees Max. bending speed: 70 degrees/sec Max. upper beam speed: UP 44 mm/sec DOWN 90 mm/sec Gsdoyfm Udopfx Advebh Electrical connection: 7.5 kW Backgauge depth: 10–1550 mm Backgauge adjustment speed: 200 mm/sec Pneumatics: 6 bar CNC control: MULTIBEND 2000 Machine dimensions (L × W × H): 4.5 × 2.1 × 2.65 m Machine weight: 5590 kg Total weight of basic configuration: 5890 kg Year of manufacture: 1997

Condition: good (used), Year of construction: 2001, machine/vehicle number: 443954701005, Offer 25086 Hydraulic profile and bar steel shears with notching device and hole punch Technical specifications: - Flat steel shears - Flat steel - 400 x 120 mm Gbjdpfsv I Sxvox Advjh - or: 300 x 22 mm - Section steel shears - L- and T-bars at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notcher - With square notcher for sheets up to approx. 13 mm - Notching depth approx. 70 mm - Notching width approx. 52 mm - Hole punch - Punching force approx. 100 t - Throat 510 mm - Stroke approx. 10 to 50 mm - Punches in steel up to Ø 31 mm in 25 mm - Electric contact stop - Various 10 punching dies + Dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Condition: good (used), Here we offer a folding machine with rotary foot punch. Gbedpfx Adjx Rp T Ieveh Suitable for 4 mm sheet thickness over a length of 3000 mm.

Condition: used, functionality: fully functional, Year of construction: 1990, machine/vehicle number: RAS 74.30; MB8001, control type: CNC control, working width: 3,200 mm, installation height: 2,400 mm, bending angle (max.): 135 °, sheet thickness steel (max.): 4 mm, sheet thickness stainless steel (max.): 3 mm, sheet thickness aluminum (max.): 5 mm, back gauge adjustment: CNC-controlled, back gauge travel distance Z-axis: 1,500 mm, overall weight: 6,000 kg, total width: 4,000 mm, input voltage: 400 V, input current: 32 A, input frequency: 50 Hz, type of input current: three-phase, The machine is in good condition. Control unit and relay board have been overhauled. Complete, segmented gooseneck tool, H=100, is included. Gbjdpfsx Av Uaex Advoh

Condition: like new (used), Year of construction: 1995, Roller conveyor length: 6000 mm Rolls divided, total width: 280 mm Min.height: 630/760 mm Max.height: 1150/1300 mm Gbedegyk A Depfx Advjh Difference between the height information given by rollers and the transverse movement Weight: 625 kg

Condition: used, Max. bending length: 3200 mm Max. sheet thickness: 4 mm steel Motor-controlled backgauge with folding cams up to 2500 mm with stop extension (disassembled) Gbsdpfoxl Dt Nex Advjh Motorized bending beam adjustment Multibend 9001 control Segmented upper beam tool with automatic tool clamping (height 100 mm) operation manual Weight: 5800 kg

Condition: refurbished (used), functionality: fully functional, control type: CNC control, controller model: MB2000, working width: 3,200 mm, type of crowning: fixed, sheet thickness steel (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,500 mm, Equipment: documentation/manual, emergency stop, RAS 74.30 Multibend 2000 Technical Data: Gbsdpfjxhd H Isx Advsh Back gauge: CNC 1500 mm Max. sheet thickness: 4 mm Working width: 3200 mm Equipment: pointed rail and bending rail Motorized adjustment of the bending beam, Safety stop (finger guard), emergency stop cable Various tools available as options Gooseneck segments available on request

Condition: new, weight max. 5,0 t workpiece diameter 303 x 2438 mm feed speeds infinitely variable 0 - 1745 mm/min Gbedpfx Ajlwt Azodvjh gear diameter 305 mm gear width 100 mm total power requirement 0,5 kW weight of the machine ca. 0,37 t dimensions of the machine ca. 1,5 x 1,05 x 0,7 m

Condition: ready for operation (used), functionality: fully functional, working width: 3,200 mm, bending angle (max.): 180 °, sheet thickness (max.): 4 mm, overall weight: 5,500 kg, opening width: 400 mm, TECHNICAL DETAILS Working area Sheet width: 3,200 mm Sheet thickness: 4 mm Upper beam opening width: 400 mm Bending angle: 0 – 180° MACHINE DETAILS Total power requirement: 7.5 kW Dimensions & Weight Space requirement approx.: 5,000 x 2,200 x 2,560 mm Machine weight approx.: 5,500 kg Gjdew Dcx Dopfx Advobh EQUIPMENT RAS MonoBend control Foot switch

Condition: used, machine/vehicle number: 499, Universelle Stanzmaschine - Universal Punching machine SKAG SP347Serial-No. SP347 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Gbsdjh Axmbjpfx Advsh Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test