CNC lathe

Ravensburg 3200 x 10.000

Condition: ready for operation (used), 3 guideway flat bed lathe - heavy duty 2 steadies are included Distance between centers: 6100 mm Swing over bed: 1500 mm Swing over cross-slide: 1320 mm Swing in gap: 2000 mm Guslhcsv Sfr Rsdw Ajb Diametre of main spindle bore: 102 mm Number of speeds: 4 > 180 rpm

Condition: new, Warehouse stage 4,000 x 10,000 mm, capacity 500 kg / m ² Included in the scope of delivery: 4 stand, on one side of 100 x 100 x 3 mm 2 stand, double-sided 100 x 100 x 3 mm 4 main beam C + 300 x 3 x 3,990 mm 10 crossbar S + 300 x 2 x 4,800 mm 20 mounting bracket 3 cross associations 18 chipboard P6, 3000 x 850 x 38 mm, UK white, OK nature incl. mounting material including load signs Dimensions, technical data Steel construction: 4,000 x 10.000 mm Floor area: 40 sqm Top height flooring: freely selectable up to 3,500 mm (other heights on request) height bottom: OK minus 338 mm Load capacity: 500 kg / m ² Support: 100 x 100 x 3 mm Main beam: C profiles C + 300 x 3 mm Crossbar: Sigma profiles S + 300 x 2 mm Flooring: 38 mm chipboard, one side white Support in the following standard colours: Gjlhcdwjd Hl Nij Aeub RAL 7035, light grey RAL 7016 anthracite grey RAL 3000 flame Red RAL 5003 sapphire blue Other colours available upon request! Accessories, such as stairs, railings, etc. are not included, but can be supplied at an additional cost. (Prices on request)

Condition: new, Functionality: fully functional, conveyor belt length: 3,700 mm, conveyor belt width: 600 mm, New L-shaped conveyor belt! Length: Diagonal: 3200 mm Horizontal: upper section: 500 mm Width: 600 mm Guolovx A N Tshcdw Asb Height: 2000 mm

Condition: good (used), Year of construction: 1995, fuel type: electric, Manufacturer: Hyster Tip: E 3,20 XM lifting capacity: 3200 kg Guelhcdelz Nbpow Asb lifting height: 3700 mm Fork length: 1200 mm

Year of construction: 2020, Condition: excellent (used), 2 cats EK DMR Goletu Nmdshcdw Asub

Condition: used, Year of construction: 2002, sheet width 3020 mm plate thickness 3.0 mm Guslhcjwd Txbodw Asb Opening width / upper beam max. 400 mm bending angle max. ~ 120 ° Control SIEMENS OP 7 work height max. 905 mm back stop - adjustable 10.0 - 1.000 mm voltage 400 V weight of the machine ca. 4500 kg range L-W-H 4650 x 2400 x 1850 mm Good / well-maintained condition (!!) - Inspected condition - Machine video - ?v=4JtYbghlz1w Equipment: - Robust electric-driven folding machine - Heavy-duty, fully welded construction - SIEMENS "OP 7" CNC control, pivoting at the front right * Selectable working mode: Manual / Semi-automatic / Fully automatic * Programming of bending cycles * Adjustments of target/actual values * Control of multiple axes (upper beam/bending beam/stop, etc.) - CNC electric-driven backgauge * Travel range 10.0 - 1.000 mm - CNC electric-driven adjustment of the bending beam - Electro-hydraulic upper tool clamping - All drives on both sides via worm gears - Wide adjustment range of the beams - Low maintenance - 1x split set of goat's foot upper tools .. Height 105 mm - 1x Bending rail .. Width 20.0 mm - 1x Free-floating double foot switch - Operating instructions (PDF)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 5100messurements (LxWxH): 3800 x 1750 x 1700 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Gjlhcevap Tuedw Ajub Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: ready for operation (used), total length: 6,050 mm, total height: 2,500 mm, power: 7.5 kW (10.20 HP), workpiece length (max.): 3,200 mm, distance table to ram: 400 mm, net weight: 6,180 kg, total depth: 2,050 mm, Soort: 74.30 MultiBend-besturing Gereedschappen zijn snel te verwisselen 2 verschillende gereedschappen inbegrepen, verdeelde onderdelen Staal 37: 4 mm Aluminium: 9 mm Max tickness: St 37: 4 mm Max displacement back gauge: 1550 mm Gujlhcswdkqbsdw Aob

Condition: used, plate width 3200 mm plate depth 2000 mm plate height 210 mm weight of the machine ca. / t Clamping plate Guolhcdweud Ipqo Asb Dimensions: 3200 x 2000 x 210 mm T-slot dimensions: ? x ? x ? (H)

Condition: new, Year of construction: 2025, FORMA Z folding machine is the most flexible and diverse sheet metal folding machine in our portfolio. Folding both up and down, FORMA Z folding machine eliminates the need to flip material, providing time-efficient folding of complex parts using one operator. The Combi beam rotation between two tooling set ups and the unique geometry gives you unrivalled working space. The automatic tool locking is fast and has features making tool changing very ergonomical. The folding beam has automatic crowning, automatic folding center adjustment and automatic sheet thickness adjustment, which provides superior folding quality in all thicknesses and across the folding length. The large number of vacuum grippers holds the part steadily, anywhere on the back gauge. Large blanks as well as small, one as well as several. The back gauge comes in many designs, which gives you great freedom of choice in how you would like to operate the machine and manage the flow of blanks and parts to/from the machine. Last, but not least – FORMA Z is fast: more production in less time for you! - CNC controlled crowning of folding beam - CNC folder that folds upward and downward, no need to flip the material. - 150 mm movement of folding beam, to move outside of material on folding side. - The Combi beam comes equipped with 203 mm (8”) High Divided Tools and straight rail. - Comes as standard with multifold tooling, CNC controlled sheet thickness and folding center adjustment. - The folding beam can be used as front gauge up to 150 mm. Guelhcdjmhhn Eow Asb - Add vacuum grippers to make work lighter, more precise, and automated!

Condition: excellent (used), Year of construction: 2001, Motorized folding machine Fab. Schröder Typ. SPB 3200x3mm year 2001 Technical data Make Schröder Type SPB 3200 x 3 Year of construction 2001 Effective length 3220 mm capacity 3,0 mm stroke upper beam: 300 mm Drive power upper beam 4.4 kW Drive power bending beam 4.4 kW Bending beam adjustment 80 mm Lower beam adjustment 80 mm Pneumatics 6 bar Dimensions L 4.6 x W 2.85 x H 1.80 m Weight 4.4 t Equipment - POS 2000 2D graphic control - Motorized folding beam adjustment - Motorized lower beam adjustment Gujlhevkfd Dscdw Ajb - Controlled backgauge 2000mm - Support table with brush inserts - Bending beam drive on both sides - Tools: Segmented bending rail 20 mm Built-in fence rail Bending foot rail H 60 mm, length 3,000 mm, segmented All information without guarantee. A demonstration under power is possible at any time in our exhibition hall.

Condition: good (used), Year of construction: 2021, Functionality: fully functional, back gauge: 1,000 mm, sheet thickness steel (max.): 6 mm, working width: 3,200 mm, Equipment: documentation/manual, Guillotine shears hydraulic swing cut KK SW 3200 x 6 mm Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.30° Backgauge: motorized 1,000 mm Motor power: 7.5 kW Length: 4,000 mm Width: 1,700 mm Height: 1,800 mm Weight: 6,250 kg Equipment: Swing cut design NC preselection control ELGO P 40 T with backgauge and cutting gap adjustment from the front via the control unit Motorized back gauge up to 1,000 mm clearly arranged control panel mounted on swivel arm Hydraulic clamps positioned close to the cutting edge foot switch kerf adjustment cutting line lighting Wide support table with sliding balls Fold-up finger guard 1,000 mm 1 side stop T-slot 2 sheet support arms with T-slot easy replacement and regrinding of the blades Guolhcdwevgc Aie Aeb Adjustable cutting length for economical processing lower blade can be reversed 4 times upper blade 2-fold reversible qualified customer service Operating instructions ENGLISH Machine and equipment according to CE regulations

Condition: new, sheet length: 3.200sheet thickness: 10cutting area width: 3200total power requirements: 15weight approx.: 7700messurements (LxWxH): 3800 x 1820 x 1920 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Guslhsvap Thecdw Asb Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,550 mm, turning diameter over bed slide: 1,550 mm, turning diameter over top slide: 1,220 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,600 mm, total height: 1,600 mm, workpiece weight (max.): 15,000 kg, spindle mount: MK 6, The PORĘBA TR-155B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical specifications: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1550 mm - turning diameter over support: 1220 mm - turning diameter in bridge recess: 1880 mm - spindle bore diameter: 120 mm - maximum workpiece weight between centers: 9,000 kg Golhsva Ebnocdw Ajub - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 27/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: used, plate width 3200 mm plate depth 2250 mm plate height 420 mm Guslhcsud Iqbsdw Aeb weight of the machine ca. / t Clamping plate Dimensions: 3200 x 2250 x 420 mm T-slot dimensions: ? x ? x ? (H) The images are for illustrative purposes only. More pictures will follow.

Condition: new, Year of construction: 2025, back gauge: 1,000 mm, sheet thickness steel (max.): 4 mm, CIDAN EVO DUO metal shear is the strongest mechanical shear on the market, with a capacity to handle sheet thicknesses from 0.5 mm to 4.0 mm in the same machine (applies to EVO DUO 32). EVO DUO is a powerful built guillotine shear equipped with two (DUO) gearmotors that distribute power and load optimally. The CIDAN EVO DUO metal shear is available in two lengths, 3200 mm and 4100 mm. The machine is well equipped as standard with a lot of features that creates a perfect working environment that meets the greatest demands on efficiency and ergonomics: Blade gap adjustment Sheet support – supports the material during the cut, as standard designed for return to sender. As option with delivery to the rear side of the machine. Pneumatic hold-down beam that enables gentle handling of softer materials, such as aluminum. Guolhcdem Nbq Rew Aeb The distance from the hold-down beam to the cutting line is less than 35 mm, which minimizes the material waste. Flexible table with T-groove rails for table pans, fixed and adjustable angular stops and support arms that can be rearranged and replaced. EVO DUO guillotine shear can be equipped with a 750 or 1000 mm programmable back gauge with CutLink finger touch control. The back gauge is a fast and accurate positioning system with many interesting functions that facilitate the handling of the sheet metal. CIDAN shear EVO DUO fits well with the CIDAN philosophy of low environmental impact, as the machine has low energy consumption, a very low noise level and is designed for maximum usability.

Condition: like new (used), Year of construction: 2021, Motorized folding machine Fab. Hezinger/Erbend Typ. MFA 3200x3mm Year 2021 Technical data Make Hezinger / Erbend Type HF MFA 3200 x 3 Year of construction 2021 Effective length 3200 mm Capacity 3.0 mm Air pressure 6 bar Upper beam stroke: 250 mm Motor 20.2 KW Weight 8.0 t Equipment - Rotating upper beam with 2 tools - Bending beam swivel range 0 - 135 - Motorized folding beam lowering 80 mm - Manual crowning of the folding beam - Backgauge 6 -1,300 mm with supports and ball rollers - ErFold control system - Safety foot switch with 3 pedals - Light grid for front protection - LED status display - Tools: Pointing rail upper beam 30° R=1.0 mm Three bending beam rails: 15, 25, 35 mm Split goat foot with height 120 mm All data without guarantee. Guolhcdsub R Spew Asb A demonstration under power is possible at any time in our exhibition hall.

Condition: new, sheet length: 3.200sheet thickness: 16cutting area width: 3200total power requirements: 22weight approx.: 10600messurements (LxWxH): 3800 x 1950 x 2080 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Guolhcdwevap Tns Aeb Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: refurbished (used), Year of construction: 2025, Functionality: fully functional, spindle bore: 120 mm, turning diameter: 1,350 mm, turning diameter over bed slide: 1,350 mm, turning diameter over top slide: 1,000 mm, turning length: 10,000 mm, total length: 12,500 mm, total width: 1,800 mm, total height: 1,800 mm, spindle mount: MK 6, The PORĘBA TR-135B2/10M universal lathe has been comprehensively rebuilt and modernized, has technical parameters in accordance with the technical and operational documentation DTR of a new machine, WOT technical acceptance conditions and the Polish Standard and also meets EU requirements. The machine is covered by a full 12-month warranty on spare parts and electrical components. Availability: within 3,5 months, starting from the order Technical data: - distance between centers/turning length: 10000 mm - turning diameter over bed: 1350 mm - turning diameter over support: 1000 mm - turning diameter in bridge recess: 1650 mm - spindle bore diameter: 120 mm Gujlokh Hbhehcdw Aeb - maximum workpiece weight between centers: 9,000 kg - maximum workpiece weight between centers + 1 steady: 12,000 kg - maximum workpiece weight between centers + 2 steadies: 15,000 kg - number of spindle speeds: 21 - range of rotational speeds (rpm): 5 - 630 - number of feeds: 80 - range of feeds (mm/rev): longitudinal: 0.07 - 10 transverse: 0.035 – 5 for upper drawer: 0.017 – 2,5 - engine power [kW]: 22/41 (1st gear / 2nd gear) - overall dimensions: total length: 12500 mm width: 2130 mm height: 1550 mm total weight: 17700 kg Standard equipment: tailstock, coolant pump, tool post, chuck cover Additional equipment available at extra charge: - 3- or 4-jaw chucks, various diameters and variants - Digital readout on 2 axes with assembly and calibration - Steady rest, 40-400 mm, with rollers - Steady rest, 400-700 mm, with rollers - Steady rest, 450-900 mm, with rollers - MULTIFIX quick change tool post

Condition: new, pressure: 160bending length: 3200column width: 2655daylight: 400motor: 11slide stroke - max.: 200repeat accuracy: 0,015precision of position: 0,10CNC Press Brake 3200 mm x 160 t Standard Equipment:Sturdy construction for high stability and precision. Guelhcdjv S Npyew Ajb CNC Axes: Y1, Y2, X, and R axes for precise control and accurate bending operations. Motorized CNC crowning device with CNC control for precise adjustments. CNC control system from the manufacturer (similar to Delem) for user-friendly operation and high flexibility. Back gauge with linear guide and ball screw, equipped with 4 back gauge fingers for precise material positioning. 2 sheet metal support arms for ergonomic handling of the material. Laser protection device on the upper beam to ensure safety during operation. Quick clamping for upper tooling for fast and easy tool change. Upper tooling system: Promecam Amada, split and offset for maximum flexibility. Multi V die system: Both Promecam and Amada systems are compatible. CE safety equipment to comply with all relevant safety regulations.

Condition: new, sheet length: 3.200sheet thickness: 16,0column width: 3100total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4,2x 2,050 x 2100 Guslhcdwed Ab Hle Aeb Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3200sheet thickness: 13,0total power requirements: 18weight approx.: 9,2messurements (LxWxH): 4000x1900x2350Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. CNC slotted table shears KKI Thanks to durable and durable mechanics and hydraulics, precise backgauge with Ball screw and user-friendly CNC control are KKI guillotine shears highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and Cutting lengths of 3 to 6 m in length are part of our standard portfolio. Of course are on customer request also higher sheet thicknesses and cutting lengths possible. The guillotine shears owe their long life to their particularly robust construction with fully welded frame. The entire machine body, the cutting beam and the Backgauge are insensitive twisting and deformation and thus enable highest cut quality. By entering the sheet thickness and material type, the CNC control calculates Fully automatically the required cutting angle and kerf. Our strong brand KKI CNC TAFELSCHER sliding block design Model 3210 has everything you need for perfect cutting. Technological advantages     Fast and precise cuts     Stable, durable frame construction     Automatic kerf adjustment and angle adjustment     Easy handling     Low maintenance costs     High safety standard     Use of components from well-known manufacturers     Low unit costs Technical specifications: Sheet thickness: 10 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 1.8 ° Backgauge: 1,000 mm via CNC Motor power: 11 kW Length: 3,800 mm Width: 2,050 / 2960 mm Height: 2,150 mm Weight: 8,650 kg • Stage execution • CNC Control - backgauge - Cutting angle - kerf - Cutting length • Ball screws for the back gauge • balls in the table • Side stop 1,500 mm Guolhjfl S Efocdw Asb • 2 pcs. Support arms 1.000 mm • Cut line lighting • Foldable up to 1,000 mm finger protection Incl. pneumatic sheet holding We have many references!

Condition: new, sheet length: 3.200sheet thickness: 10,0total power requirements: 11weight approx.: 8100messurements (LxWxH): 4000 x 1950 x 1900 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Gelhcod Ab Hnodw Aoub Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 6,0cutting area width: 3200total power requirements: 7,5weight approx.: 6,250messurements (LxWxH): 4180 x 2150 x 2000 Gujleh Talzehcdw Ajb Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Sequence repeat function • Auto-cutting (Flying cut)

Condition: new, sheet length: 3.200sheet thickness: 13,0total power requirements: 18,5weight approx.: 11700messurements (LxWxH): 4000 x 1700 x 1800 Multi-edge blades for cutting aluminum, carbon steel, and stainless steel  Cutting-line illumination and wire for shadow-line cutting • Stroke counter • Quick cutting-length adjustment • Hydraulic and electrical overload protection • Squaring arm and front support arms • Bed infill plates with ball transfers • Delta inverter with ball screw and polished rod with 0.01 mm accuracy • Backgauge adjustment according to blade gap • Backgauge retraction feature • Sub-program and programming loop • Gslhed Ab Hmecdw Aoub Sequence repeat function • Auto-cutting (Flying cut)