Filter press 1200x1200 mm + 1500x1500 mm

Rittershaus & Blecher Passavant Netzsch KFP 1200 + KFP 1500

Condition: good (used), filter area: 75 m², pressure: 15 bar, System: used chamber filter press ( refurbished ) Design: side rail guided Construction: optional according to customer requirements, e.g. also mounted in a container Filter plate format: 800x800 mm Number of plates: 68 Filter plates: PP Cake thickness: 30 mm Drain: closed Filter cloths: optionally available depending on the medium Filter area: approx. 75.21 m² Press capacity: approx. 1081.2 dm3 Pgsdpfsqakhusx Ap Een Plate pack length: approx. 4243 mm Filter pressure: approx. 15 bar Plate transport: manual Plate closure: electro-hydraulic plate closure Safety equipment: optional according to customer requirements and design Accessories: optional as special accessories Control cabinet: optional Electrics: electrical wiring of all consumers optional. Pump technology: optional Condition: refurbished Purchase or rental: Viewings of the systems by arrangement at our factory. Would you like to rent or buy this system? Please contact us, we will be happy to assist you.

Year of construction: 2005, condition: excellent (used), KLIKLOK CERTIWRAP C-80 ID.NO. 2505 Kliklok HST Certiwrap C-80 sleeve machine for putting cardboard packaging around products. 3x different tools included & associated Nordson glue set year mod 2005. No. 1. 160 x 388 mm. No. 2. 160 x 407 mm No. 3. 422 x 162 mm dimensions 470 x 130 H 170 cm. Pgsdpfjki Tlqox Ap Ejn

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable Pgedpfxot Rmhae Ap Een - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Pedpfornnt Iox Ap Eegn Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.

Year of construction: 2003, condition: excellent (used), For sale: KURTZ cutting line mod.VBR-S3 (Complete set: cutting KURTZ mod. VBR-S3, KUKA selection robot, packaging VIRO mod. PPZA-1300/24/MZG, palletizing, wrapping) EPS block cutting line with maximum dimensions of 5000x1200x1200. A block option of 600x1200x2400 is also available Complete line in "U" arrangement, consisting of: - Block buffer loading by dump truck - Horizontal cutting with automatic wire positioning, with double-frame cutting and oscillation - Polystyrene waste/scrap removal system: top, bottom, sides - Side cutter with manual wire positioning - Down cutter with automatic wire positioning - Anthropomorphic robot for product selection - VIRO packaging machine - Rotation of packages for cross stacking - It is possible to palletize different size polystyrene boards on wooden pallets or on glued polystyrene strips under the column with stacked polystyrene packages - Automatic stacker/palletizer for creating columns up to 3 meters high and up to 3 meters long - Vertical wrapping machine for automatic stretching of columns of polystyrene packages - Complete with inkjet printers and automatic labelers - Siemens S7 PLC controller - Complete with safety barriers with switch type protection - High-capacity line, in very good condition, requires an area of about 600 m2 (40m x 15m) Pgjdpouct Upefx Ap Ejn - Year of manufacture: 2003 - Electricity requirements: 400V; 50 Hz; 115 kW; 300A

Condition: good (used), Year of construction: 2000, GRUNWALD HITTPAC AKH-019R/! Item: GRUNWALD Hittpac AKH-019R/1 Grunwald-Cup Filling Machine various, margarine, sous, butter, cheese etc.. Grunwald Rotary cup filling machine with 2 heads, for round cups Year of production: 2000 For hot fill of liquid products including cup lifting device servo driven and hopper with scraper agitator and feed valves (CIP cleanable), aluminum seal dispensing by vacuum and tip sealing, heat sealing of aluminum seal, snap-on cover station and out feed. Stainless steel control panel, hanging on the machine, and operator panel. Machine has polycarbonate glass safety guards. CEE machine, incl. documentation Podpfx Ajp R R Dwep Esgn Stationed: Denmark

Condition: excellent (used), Year of construction: 2005, Vertical blockmold: KURTZ mod. MFV (4920 x 1274/1000 x 1240mm) Basic data: -Year of manufacture: 2005 -Block dimensions (HxWxL): 4920 x 1274/1000 x 1240mm -Operating voltage: 3×400 V, 50 Hz -Power consumption: 77 kW -Blockmold with movable side wall -Complete vacuum system (GARDNER DENVER / SIEMENS) -Hydraulic system: REXROTH–BOSCH -Operational pre-loading silo for the blockmold with dedusting system -Siemens PLC controller and Siemens touch-screen HMI control panel replaced with NEW units in 2019, including a control software upgrade -Siemens TOUCH SCREEN panel (replaced with a NEW one with a larger display) -MATTHEWS printer for block labeling/date marking -Block evacuation system with block storage -Complete set of documentation -Condition: EXCELLENT It is possible to adjust the maximum block height to, for example, 4550–4600 mm. Psdpfx Apeucvq Ho Eogn TAG: Block mold, block mould, block-form, styrofoam, EPS, VIRO, Kurtz, Erlenbach, EREMA, Teubert, Lauscha, Autefa, HIRSCH, EPPINGER, Mert Makina

Condition: refurbished (used), filter area: 459 m², pressure: 15 bar, cake thickness: 30 mm, Plant: Chamber filter press, tunnel design, second-hand Design: head-guided Filter plate format: 1200x1200 mm Number of chambers: 100 Cake thickness: 30 mm Filter plates: PP Filter cloths: optionally available in coordination with the medium Drain: closed Filter area: approx. 459 m² Press capacity: approx. 2999 dm³ Filter pressure: 15 bar Closing pressure: 380 bar Operating temperature: min. 10° max. 50° Plate transport: automatic Closing: electro-hydraulic Pgjdpfoqa Dv Tjx Ap Eon Motor voltage: 380 V Control voltage: 230 V - 24 V Control cabinet: included Accessories: optional according to customer requirements and design Safety device: optional Condition: This system is available as a used system - ready for operation. Refurbished service: optional - The system is refurbished after receipt of order. Special service: optional - The system is set up according to your requirements after receipt of the order. Purchase or rental: Viewings of the systems by arrangement at our factory.

Condition: used, Year of construction: 2000, machine/vehicle number: SO117, Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph This HDPE Blow Molding Machine offers a highly specialized system for blow molding containers made of high-density polyethylene (HDPE). This machine handles bottle formats up to 2 liters and produces up to 2700 bottles per hour (bph). Moreover, the system uses a 4+4 configuration, meaning four upper and four lower cavities, which optimize production with a symmetrical and highly efficient design. You can access this machine starting mid-October. Main Technical Features of the HDPE Blow Molding Machine TECHNE SYSTEM To ensure high precision in shaping bottles, the blow molding system provides a cavity spacing of 150 mm. Additionally, the machine includes a double carriage, which allows you to control the production cycle optimally and minimizes downtime. In particular, this Blow Molding Machine accommodates containers up to 2 liters, giving you significant flexibility in producing various types of packaging. Mold Configuration and Flexibility Although the machine does not include molds in its standard supply, it supports a wide range of mold sizes, up to a maximum capacity of 2 liters. Furthermore, you can easily adapt the entire system to meet specific production needs. Upon request, you can also add accessories or make necessary modifications, which we offer at separate quotations. Additionally, our technicians, who manage the disassembly, can reassemble the machine, thereby ensuring continuity and reliability in operations. Manuals and Technical Documentation This blow molding machine comes with complete technical manuals and detailed schematics, which will assist you during installation, maintenance, and daily operations. More specifically, the documentation provides detailed specifications regarding container tolerances and operational schematics of system components. As a result, the design optimizes critical values like bottle spacing and the distance between extruders and the container body. Production and Performance This Used Blow Molding Machine supports production capacities ranging from 2400 to 2700 bottles per hour, depending on operating conditions and container types. Therefore, it allows you to maintain a steady output rate. In terms of precision, the mold-carriage stroke extends to 660 mm, allowing well-calibrated movements that ensure production uniformity. Consequently, the machine can produce bottles up to 290 mm wide and 690 mm tall. Conclusions of the HDPE Blow Molding Machine TECHNE SYSTEM The Used HDPE 4+4 Blow Molding Machine TECHNE SYSTEM up to 2700 bph, available from mid-October, provides a versatile and highly efficient solution for companies that require a high production capacity. Additionally, you can customize the system by adding accessories upon request. As a result, the flexibility in mold configuration allows you to adapt the machine to a wide range of production demands. Lastly, the machine ensures operational efficiency due to its reliability, and the availability of technical support for both assembly and disassembly further enhances its performance. Pjdpsvgvkajfx Ap Eogn

Condition: excellent (used), Year of construction: 1979, Rope Production line / Strand Rewinding line REDAELLI Line STABILISED CONCRETE PRE-STRESSING STRAND 3-wire and 7-wire strands which use with beams covering long spans, bridge elements, large pre-stressed elements, e.g. floor elements, piles, pre-tensioned and post-tensioned structures. - Year -1979/2005 - Pay of spool size - 800x900 mm - ⁠Range of strand production : - 3/8 - 1/4 - ⁠1/2 - 5/16 - ⁠6/10-7/16 - ⁠7/10-9/16 - Coil Weight - 4.000 kg - ⁠speed - 40-60 m/min. - ⁠High carbon steel wire - ⁠PC Stand size: - ⁠6.4,6.9,9.3,21.5 mm - ⁠Electrical supply - 400 kW Line Consists : Wire Pay Of Wisting Unit Pgjdpjt Iq Hbofx Ap Ejn Furnace Cooling System Traction Rollers Winding the Rope