Profile bending machine

Sahinler HPK 200 DP

Condition: new, Year of construction: 2025, control type: CNC control, degree of automation: automatic, pipe diameter (max.): 51 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 3 mm, bending angle (max.): 190 °, bending radius (max.): 250 mm, number of axes: 5, Equipment: CE marking, emergency stop, foot remote control, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling die and 2 sets of bending dies, or 3 sets of bending dies, as per required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo Motorized Feed Axis • Servo Motorized Rotation Axis • Servo Motorized Bending Axis • Servo Motorized H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling capability • 3D Bending Simulation • Collision Simulation • Daily, Weekly, and Monthly Total Operating Status Reports • Calculation of Workpiece Material Length • Calculation of Estimated Bending Time • X-Y-Z to Y-B-C Conversion • Emergency Stop Foot Pedal with Mobile Function • Remote Assistance • Mandrel Bending and Mandrel-less Bending • Safety Plate behind Bending Head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Chuck Clamp • Safety Lock on Electrical Cabinet and Keyed Panel Lock • Electrical System Cooling Unit • Overload Protection • Detailed Operation Report Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Sets of Dies • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable tube diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3 mm Maximum Bending Radius mm 250 mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50–200 Bwodpfxexircae Alxon Working Length mm 3000 Rotation Tolerances ±0.1 Bending Speed kW Variable LxWxH mm 6350x1400x1600 Weight kg 3750

Condition: new, Shaft diameter: 580working speed: 3-6motor power: 30length: 2760width: 2310heigth: 2680weight approx.: 14400 Bwjdpfjh Alh Hex Alxen Technical specifications: Welded steel construction frame 3 rollers are driven Hardened and ground shafts made of high-strength special steel Rollers are hardened and ground Horizontal and vertical working position Hardened standard rollers Mobile control panel Angular side guide rollers Brake motor equipped for precision bending Digital displays (2 pieces) Options: Digital display STANDARD NC unit 10 screen EURO 11,500.00

Condition: new, I-beam section - upend 120 x 25 (d 1600) mm bar material dia. max. 140 x 3 (d 3000) mm L-beam 100x100x10 (d 1600) mm square material 140 x 40 x 3 (d 4000) mm I - beam section - flat steel 200 x 35 (d 1000) mm bar material - diameter 70,0 (d 800) mm tool taper 100,0 mm 0 315 mm turning speeds 5,4 m/min. total power requirement 11,0 kW weight 2.240 kg range L-W-H 1500 x 1650 x 2100 mm Furnishing: - electro-hydraulic ring/profile bending machine - Hydraulic lower/side roller adjustment * for extra small bending radii - Lower/side roller can be delivered individually Bodjxcukyspfx Alxswn - 3x powered rollers - divided roller segments - Digital position display of the bottom/side rollers * Display with TouchScree function - hardened tool holder (42CrMo4) - Machine base - 2x hydraulically adjustable side guides - Horizontal and vertical work possible - freely movable control panel - Pressure gauge / pressure indicator for the rollers - CE mark / declaration of conformity - User manual in German

Condition: ready for operation (used), Year of construction: 2013, A welding system for welding metal pipes is available. Number of heads longitudinal seam/round seam: 3/3, 4th head: possible. Inner workpiece diameter min./max.: 600mm/4500mm, max. workpiece weight: 50t, max. wire diameter: 4mm. Conveyor belt driven/rotating: 25t/25t. Head capacity: 2x AC 1000 and 1x DC 1200, including automatic brushing system. Documentation available. On-site inspection is possible. Bjdpovr Edmjfx Alxswn

Condition: new, Shaft diameter: 480working speed: 3-6motor power: 22length: 2500width: 2200heigth: 2300weight approx.: 9300 Technical specifications: - Steel construction welded frame - 3 Rolls are powered - Hardened and ground shafts made of high tensile special steel - Rolls are hardened and ground - Horizontal working position - Hardened standard rolls - Mobile control panel - 3 Axis mechanical lateral angle guide rolls - Brake motor equipped for the precision bending Bwsdpfxoh Alh Rj Alxjn - Digital Read-Outs (2pcs) Options: - Digital Readout STANDARD - NC Unit 10 Screen  EURO 11.500,--

Year of construction: 2014, condition: refurbished (used), machine/vehicle number: 714_0917, Robot palletizing system KEG barrels loading and depalletizing. Capacity of up to 120 / h loading and depalletizing. We have been operating these systems successfully for several years. Our KEG gripper can grap KEGs from 300-450mm (adjustable). The system is equipped with a protective housing and access control through a light curtain. PLC Controlled via Siemens S7 TIA Portal. Required space approx. 4500x3500mm. Optionally also a flow keg weigher, pallet labeler, automatic capsule application available from us. We would be happy to integrate your existing components into our system. We have the full KNOW HOW! Have references for several years. We also provide support after the purchase. Can be implemented at short notice, assembly, integration and commissioning from a single source. Bodpeg N S Edsfx Alxown

Condition: new, functionality: fully functional, Year of construction: 2021, For sale: Brand new, never-used DAVI bending machine. *MAIN FEATURES MCP 18* *1. Type and Capacity* - *3 hydraulically driven rollers*, pyramid configuration - *Shafts Ø 180 mm* → this is the "18" in MCP 18 - *Bending*: round, square, rectangular tubes, angles, flat bars, UPN, IPE, HEA... all b235 profiles Bwodpfxey N Rbws Alxen *2. Indicative capacities on MCP series* DAVI does not provide the exact MCP 18 datasheet online, but for the equivalent MCP range: Profile Approx capacity MCP 18 Round tube Ø 6" to 8" depending on wall thickness Solid square 80x80 mm to 100x100 mm Angle 120x120x12 mm UPN UPN 200 - 240 IPE flat flange IPE 200 - 240 Actual figures depend on wall thickness and steel grade. The 18 cm Ø shafts make this a mid/high-category machine. For all available options, please refer to the photo in the listing.

Condition: new, sheet width 2100 mm plate thickness 40 mm Bodpfxeyv Nt Ee Alxjwn pre-bending 30 mm upper roll diameter 390 mm lower roll diameter 360 mm side roll diameter 300 mm total power requirement 22 kW machine weight ab. 17200 kg Overall size 5060 x 2200 x 2180 mm

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 134000 € 2532.6 € 3100 mm 25 mm 25 mm 20 mm 20 mm 20 mm 16 mm 360 mm 360 mm 270 mm 60 mm 1510 mm 22 kW 5560 mm 2060 mm 2050 mm 16750 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation adjustable pinching pressure variable rolling speed hardened rolls Bwedpfeypbquox Alxjn conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 95000 € 1795.5 € 3100 mm 13 mm 12 mm 8 mm 13 mm 10 mm 10 mm 8 mm 270 mm 270 mm 230 mm 50 mm 1155 mm 15 kW 5310 mm 1660 mm 1590 mm 10050 kg 4 rolls fully hydraulic drive of upper and lower roll (from 30 mm bending capacity all four rolls) by planetary gear box hydr. side rolls positioning with electronical synchronisation hydr. lower roll feed with mechanical synchronisation Bwodeypbqhjpfx Alxon adjustable pinching pressure variable rolling speed hardened rolls conical bending device hydraulic drop-end bearing moveable control panel overload protection user manual in GERMAN or ENGLISH according to CE rules OPTIONAL: NC control upper and lateral supports IMPORTANT ISSUES AT CONICAL BENDING: the max. sheet metal thickness isequivalent to 50 % of nominal capacity