Universal milling machine

Schaublin 53 N

Condition: used, TECHNICAL DETAILS - Table dimensions : 1800 x 800 x 1250 [mm] - center height : 102 [mm] * Max. diameter on bench : 200 [mm] - Boring : 20 [mm] Cyswozelfm * Spindle speeds : 750-3000 [rpm]

Condition: good (used), Precision lathe, make SCHAUBLIN, type 102 N 80 No. : BL 280280 Technical data: Data : Tip width approx. 400 mm Center height 102 mm Spindle bore 26 mm Speeds see speed diagram Width x depth approx. 1.3 x 0.5 m Dn3Pax Machine weight approx. 0.4 tons

Condition: used, Workspace Tip height 102 mm Centre width - with normal headstock 450 mm - with reduction gear headstock 375 mm - over the cheek 200 mm - over the slide 120 mm Headstocks spindle nose for collets type Schaublin W25 spindle bore 25 mm Collet bore 20 mm Reduction ratio of the gearbox 1:5 Cheek Height x width x length 168 x 130 x 1000 mm cast iron cheek, trapezoidal profile like lathe 102 N and dovetail guide hardened and ground. Slide Largest travel on the cheek 400 mm Tool slide width - length 80 - 194 mm Path manual adjustment 90 mm Center height above tool slide 20 mm Shaft of the lathe tools 12 x 12 mm cross slide width - length 94 - 300 mm Pi2Hdjfb8 Path manual adjustment 100 mm Bed slide length of the guide on the cheek 250 mm Lead screw Guiding spindle for longitudinal turning and threading, Ø 40 mm Lead screw hardened, thread ground, pitch 4 mm Speed range Speed 270 - 3000 rpm Longitudinal turning 0.02 - 0.3 mm/rev. Thread cutting Largest pitch with standard change gear set 4 mm Machine plate for 20 metric pitches 0.25 - 4 mm Machine plate for 25 english pitches 80 - 6 G/" Tailstock Diameter of the quill 30 mm Inner taper of the quill 2 MORSE Distance of the quill 80 mm Cooling device Coolant tank - capacity 23 litres Net weights Lathe on workbench, approx. 225 kg Lathe on box base, approx. 550 kg

Condition: good (used), Center height 102 mm Distance between centers 450 mm Qp3Qv Spindle speeds 45-2500 rpm Misc accessories MARCELS MASCHINEN CH

Condition: excellent (used), Costruttore SCHAUBLIN Modello 102 N RDati Tecnici altezza punte mm 102 passaggio barra Ø mm 22 modello pinze W 20 diametro autocentrante mm 100 velocità del mandrino gamma bassa giri/1' 270÷ 1500 velocità del mandrino gamma alta 540 ÷ 3000 diametro cannotto contropunta mm 30 corsa cannotto contropunta mm 80 cono d'attacco contropunta MOSE 2 Beephou potenza motore kW 4 peso Kg 650~ Dotazione pinze n° 50 pinze speciali a campana diametri 51÷110 n° 10 torretta portaurensili n° 1 morsetti portautensili (stelo 12 mm) n° 5 autocentrante Ø 100 mm n° 1 accessori vari

Condition: refurbished (used), HIGH PRECISION LATHE LATHE Bench lathe POST LATHE PRODUCTION LATHE Brand: Schaublin Type: 102 N, W20 Distance between centers 450 mm Center height 102 mm The machines were completely overhauled by us. All bearings NEW, repainted, electrics NEW, etc. Oayn7Wlz They are in TOP condition - The photos speak for themselves. Additional accessories can be purchased separately in my other offers. Machine is sold with no guarantee.

Condition: excellent (used), Table size 1100x305mm Working travels 700x250x490mm Bwboeuwifn Spindle taper 40 Spindle speeds 38-1510 rpm Digital read-out Misc accessories MARCELS MASCHINEN CH

Condition: used, Year of construction: 2018, Working width: 530 mm Table length total: 3.000 mm Number of knives: 4 Rotation speed: 5.000 rpm Cspf0Zaosa Auxiliary stop: Yes Noise absorbing table lips: Yes Protection cover: Yes Adjustment: manually Conformity marking: CE mark Total connection: 5,5 kW Weight: 725 kg Space requirement Length: 3 m Space requirement Width: 1,2 m Space requirement Height: 1,2 m

Condition: new, Indramat MDD112C-N-015-N2L-130GA1 SN:MDD112-19537 ,unused, 100% functional, scope of delivery according to photos Cj2Pzbjzce

Condition: new, Year of construction: 2023, New machine Year of construction 2023 planing width 530 mm Total planer table length 3000 mm Feeding table length 1800 mm Motor 5.5 kW with automatic star-delta start AIGNER aluminum dressing fence 1300 mm, swiveling 0 - 45° with Aigner auxiliary fence for narrow workpieces 4-blade planing shaft TERSA system Coqykswt d = 120 mm, speed 5000 rpm Bridge guard over the planing shaft chip removal up to 6 mm Upper control panel Suction nozzle 150 mm Weight 700 kg Availability: short term Location: Hochheim

Condition: used, Year of construction: 1989, Machine/vehicle number: 389117, Lg.no. 24232 Technical data: - Cutting range at 90° round 530 mm - Square 500 x 1100 mm - Saw blade dimensions 7200 x 54 x 1.6 mm - Infinitely variable cutting speed - Cutting pressure infinitely variable - Hydraulic. Material clamping Cehqaz8Zv - Preselection of the lifting height of the saw blade - Coolant device - Total drive power 400 V / 8.5 kW - Space requirement approx. W 5000 x H 2750 x D 1800 mm - Weight approx. 5000 kg - 3 roller conveyors each 2000 mm

Condition: new, exhibition machine FIMAL surface planer type PF 530 N, Partnership Edition Technische Daten: Abrichttischabmessung: 3.000 x 530 mm Aufgabetischlänge: 1.800 mm Abrichtanschlagabmessung: 1.500 x 175 mm tilting range fence: 0 - 45 ° 4-knife-Hobelwelle System TERSA d=120mm: 5.000 UpM max. chip removal surface planer to CE: 8 mm motor 380 Volt / 50 Hz.: 5,5 kW Schallpegel to EN 27960: 82,9 - 88,9 dB(A) Cluq9Jn Grundausstattung: Elektrik to CE-Norm Magnetbremse suction nozzle d=150mm protection device top bedienbares Schaltpult original AIGNER Aluminium fence with integriertem auxiliary fence

Condition: used, 5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve -Manufacturer: Festo, solenoid valve -Type: VMPA1-M1H-NP Mat. no. 533348 S302 Mxzjmk -PN: 3 - 10 bar -Dimension: 110/40/H15 mm -Weight: 0.1 kg

Condition: used, TECHNICAL DETAILS - max. diameter over bed : 270 [mm] - max diameter over slide : 130 [mm] - distance between centers : 440 [mm] - spindle nose : CAMLOCK D1-3' - max bar diameter : 28 [mm] - power : 7.5 [kW] Cyygpnsvqo - spindle speed : 0-5000 [rpm] with variator - strokes X x Z : 180 x 400 [mm] - work feeds : 0-5000 [mm/min] with variator - quick feeds : 7500 [mm/min] - supply : tri 380V 50Hz 14kW - size : 1700 x 1226 x 1660 [mm] - weight : 1415 [kg] EQUIPMENT - numerical control FANUC 20-T - quick change turret Multifix 'A' - collets chuck SCHAUBLIN B32 - tail stock with capstan - coolant tank with pump

Condition: excellent (used), Year of construction: 1998, Turning diameter over cross slide: 180 mm, Turning length: 350 mm, Turning diameter: 250 mm, Spindle bore: 42 mm, Spindle speed (max.): 6,000 rpm, Travel distance Y-axis: 40 mm, Bar diameter: 42 mm, Power: 0.015 kW (0.02 HP), Machine details Stock-No. 1105-03963 Type of machine CNC Lathe Make SCHAUBLIN Type 42S TM 5 Year of manufacture 1998 Type of control CNC Storage location FRANKREICH Country of origin Swizerland Delivery time immidiartely D7Telrs Freight basis ex Warehouse Technical details turning diameter 160 mm turning length 350 mm control Fanuc 18 IT spindle bore 42 mm work stroke - bed slide 200 mm spindle turning speed - stepless 6000 rpm feeds x + z axis stepless 20 + 30 mm/min tool taper VDI 25 total power requirement 30 kW Additional information 5 axis machine with suBspindle C-axis, Y-axis 1x 12x turret with powered tools appr. 10 tool holder and tongs (6-40mm) and other accessories LOT OFF TOOLS

Condition: used, Functionality: fully functional, Machine/vehicle number: 302654, Automatic turret lathe Schaublin 123 Condition: Used Max. 160 mm distance spindle head - turret head: 400mm Spindle caliber: 52 mm revolutions: 750-1500-3000 rpm working feed: 10 - 2000 mm/min Cutjeg79Ni length: 1770 mm width: 1220 mm height: 1750 mm

Condition: used, Year of construction: 1997, turning diameter 270 mm turning length 410 mm control Fanuc 20 T centre distance 650 mm spindle tunring speed 30 - 5000 U/min auto power on hours 2700 h machine weight ab. 1415 kg kg Dimensions (L/W/H) 1700 x 1650 x 1170 mm In our opinion, the machine is in very good condition and can be inspected under power by appointment. Accessories, tools and clamping devices shown are only part of the scope of Dpmnhn delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: good (used), Year of construction: 2000, Fanuc 18i computerized control system Max. permissible diameter over the slide 115 mm Max. permissible diameter over the bed 270 mm Height of the tips 125 mm Power 5.5 / 7.5 KW Spindle speed 50 - 5000 rpm Spindle diameter 28 mm Transverse displacement 200 mm Feed speed X / Z: 0 / 5 cps/min Fast progress x 7.5 mm/min Fast progress Z7.5 mm/min Tank capacity 55 liters Sizes 1830 x 1260 x 1700 mm Weight 1250 kg Year 2000 Czc2Lbn2Q0

Condition: used, Table size 650 x 250 mm X/Y/Z - 400/330/475 mm Spindle speeds 63-2800 rpm Spindle taper ISO 30 Equipped with: 3-axis dro Heidenhain Collet chuck Various collets - more than 100 pcs. Yqine2X 7 pcs. Vices 23 Toolholders Dividing head w/discs Rotary table 250 mm dia. Angle plate Coolant Lots of other accessories - see photos

Condition: used, TECHNICAL DETAILS - Number of axes : 2 MAIN SPINDLE - Spindle nose : A2-3 - Spindle power : 5,5 [kW] - Spindle speeds : 30 - 5.000 [rpm] - Max. bar diameter : 51 [mm] - Max. diameter on bench : 280 [mm] - Max. Ø above slide : 150 [mm] - C axis indexing precision : 0,001 [°] TURRET - Number of positions : 8 - X/Z stroke : 220/300 [mm] - Tool type : VDI30 - Distance between centers : 650 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2250x1410 [mm] - Machine height : 1700 [mm] - Machine weight : 2300 [kg] Dpr0Fz EQUIPMENT - CNC : Fanuc 18i - Coolant tank - Collet chuck

Condition: excellent (used), Center height 125 mm Distance between centers 500mm Spindle speeds 40-3000 rpm Several accessories Djagkh MARCELS MASCHINEN CH

Condition: excellent (used), Year of construction: 1989, Functionality: fully functional, Machine/vehicle number: 317811, Turning diameter over cross slide: 125 mm, Spindle bore: 32 mm, Turning diameter: 270 mm, Turning diameter over bed slide: 270 mm, Turning diameter over top slide: 130 mm, Center height: 125 mm, Turning length: 500 mm, Feed rate X-axis: 260 mm/min, Feed rate Z-axis: 260 mm/min, Spindle speed (max.): 3,000 rpm, Metric thread diameter (min.): 40 mm, Type of input current: three-phase, Overall weight: 1,300 kg, Quill mount: MK 2, SCHAUBLIN 125C turning and threading machine. (lathe, turning lathe) Infinitely variable speed. Stepless feed in X and Z. Automatic stops for thread cutting. Version C with collet set B32, collet quick clamping device, turning jaw chuck, multifix steel holder with several inserts, various turning steels. Heidenhain 3-axis digital readout. The machine can be inspected under power. Forklift available. Shipping can be organized on request. Dpn7Qx TECHNICAL DATA Center height/center width Center height above the cheek: 125 mm above the tool slide: 26 mm Largest point width: 500 mm Largest turning diameter: above the cheek: 270 mm above the slide: 130 mm in the spindle bore: 28 mm in collet B32: 24 mm in fixed or traveling steady rest: 65 mm Headstock spindle speeds, drive via variator: 225-3000 rpm Spindle speeds with reduction gear: 68-3000 rpm Bed slide Largest shaft cross-section of the turning steels: 16 x 16 mm Slide travel on the cheek: 440 mm Longitudinal stroke of the swiveling tool slide: 90 mm Stroke of the cross slide on the bed slide: 130 mm Reading accuracy on the handwheels: 0.01 mm Automatic feeds All slide feeds: 4-260 mm/min Lead screw pitch: 4 mm Thread cutting using universal thread cutting box (metric pitch): 0.25?3.5 mm Special pitch when using the thread cutting box and change gears: 0.25-8 mm Tailstock inner taper of the tailstock spindle: Morse 2 Length stroke of quill: 100 mm Weight and space requirement Weight: 1350 kg Dimensions (l x w x h): 148 x 73 x 128 cm Errors excepted. Private sale therefore no guarantee The machine is in Switzerland. Shipping can be organized on request. Price on request.

Condition: good (used), C02 and vacuum mixer. Programmable controls 450 litre capacity. Dplaf2

Condition: like new (used), Year of construction: 2021, Operating hours: 1,500 h, Functionality: fully functional, Machine/vehicle number: 000327-DTP, Type of cooling: air, Total width: 600 mm, Total height: 920 mm, Total length: 600 mm, Overall weight: 120 kg, The N-Lase Desktop Pro is the most popular laser in our N-Lase range. Designed for marking, etching, engraving and annealing almost all materials in mid to high volume applications, the Desktop Pro is a full turnkey solution which includes an integrated All-in-One PC and an automatic door function to ensure maximum efficiency and simple operation. Fitted with 20 watt MOPA fiber laser sources with a MTBF of 100,000 marking hours. Clpbxda82O The N-Lase Desktop Pro Laser is the ideal tool for etching, marking or engraving a wide variety of applications, including metals, plastics, cardboard, wood and more. Featuring a robust enclosure with 3-sided access, auto door opening, computer-controlled focal height, rotary-ready setup and a powerful MOPA fiber laser as standard; the Desktop Pro can swiftly meet most engraving challenges. From marking part numbers in a factory to personalising rings in a jewellery shop, the Desktop Pro is used in dozens of industries for a limitless amount of uses. By using the software supplied with the Desktop Pro, the calibration of the z-axis allows for the focus height to be adjusted without having to manually do so. This means once the part is in the machine, you can close the door and use the software to lower the z-axis to mark your parts. Every Desktop Pro laser engraver has a built-in fan, preventing overheating without the need for bulky water coolers. This helps keep the machine as streamlined as possible, making it truly desktop. The fan is also quiet too, ensuring it's suitable for any work environment. Also comes with rotary - with a plug and play rotary attachment. The rotary allows the laser to mark around the inner or outer circumference of a cylindrical or round object, the rotary moves the part to ensure that a consistent mark is achieved where desired. The bed of the Desktop Pro is an equipped tooling plate, meaning that the rotary is moveable throughout the bed to accommodate parts of all sizes and can be screwed in to ensure it stays in place. The door opens internally to the footprint of the machine, meaning that once the door is open the footprint stays the same, with 3 sided access it means that parts of all shapes and sizes can be fitted into the machine from any angle. When designed this we ensured that the door would impact the parts that could be placed inside. All of our standard range (excluding the integrated) are all Class 1 laser systems. This means that they can be used in any environment and the laser beam is contained within the unit, the door has a viewing window with laser safety glass so that you can see the part being marked inside the machine. Each machine comes with a Class 4 override option which turns the system into a class 4 laser. This is useful for parts that may not be able to fit on the bed of the machine with the door closed. To use the laser as a class 4 laser, safety procedures must be followed including wearing laser safety glasses.

Condition: used, TECHNICAL DETAILS - Strokes : 320 x 150 x 375 [mm] - Distance between vertical spindle-table surface : 310 [mm] - Distance between horizontal spindle-table surface : 410 [mm] - Spindle speeds (continuous adjustment) : 58-2000 [Rpm] - Spindle taper : 30 ISO - Feeds : 12-400 [mm/min] - Fast feed up : 1200 [mm/min] Dprz02 - Supply : 3 x 380 [V/50 Hz] - Motor power : 1.5 [kW] - Total installed power : 2.1 [kW] - Machine floor space : 1500 x 1100 x 1600 [mm] - Machine weight : approx. 700 [kg] EQUIPMENT - Revolving vice - Irrigation system