Miscellaneous

Schmedt PraeziCase EC-3 Autocase

Condition: good (used), Build in 2006 Komfi Aspira Laminating machine Max laminating speed 15 m/min Crjdpfx Asgyzzuohnjg Max sheet width 52 cm Sheet size max. 52x74 cm; min. 20x20 cm Paper weight . 115-350g/sqm.

Condition: new, NEW machine, end-of-series Pit Stop D2H HIGH SPEED double-head creasing and perforating machine, equipped with 2 standard creasing kits (for Head A and Head B) and mobile wheels. The second head, unlike the first, operates from bottom to top. All creasing and perforating tools can be installed on this second head. This allows creasing and perforating to be performed in a single pass; or, by fitting two creasing tools, it is possible to perform creases from both the top and the bottom in one pass, ensuring the correct crease orientation for zig-zag folding. High-performance creasing machine with a maximum output of up to 14,000 sheets per hour. Easy-to-use controls allow for up to 100 creases or perforations per sheet and a memory capacity of up to 200 jobs. The machine can crease, perforate, and punch, making it ideal for WIRE-O binding and calendar production. This end-of-series machine can be equipped with the following optional tools: - Digital creasing kit (for both Head A and Head B) - Perforation kit 2/1-3/1-4/1 (for both Head A and Head B) - Micro-perforation kit (for both Head A and Head B) - 100 cm extension - Punching kit in various sizes Technical data: Min./max. sheet size: 8×10 cm / 50×70 cm (with optional extension 50×100 cm) Paper weight: 80 to 600 g/m² Programming: 200 programs (100 operations per program) Minimum crease distance: 0.1 mm Production speed in A4: 14,000 sheets/hour (with 1 crease) Crsdpfoxmhflsx Ahnsg Power supply: 400 Volt three-phase + neutral, 50 Hz

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter Csdpfxex Dkk So Ahnsrg - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2010, condition: used, Case maker Kolbus DA 270 Year: 2010 For fully automatic production of book cases, files, display cards, calendar backs or game boards. Description: - Automatic setting - Motorised setting - Automatic case counter - Board pre stacking conveyor: 1700 mm - Board cutter: PS - Centre strip infeed (flexible) - Waste chopper - Cloth feeder: Non-Stop - Glue unit Crjdpfx Aex Ary Ejhnog - Preheated glue tube - Viscosity control - Device for inside lining with hotmelt - Device for producing padded cases - Pressing station - Stacking delivery Max. mechanical speed: up to 65 cycles/min Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2004, Case maker Kolbus DA 270 Year: 2004 Description: - Digital display - Board pre stacking conveyor - Board cutter: PS Credpfxjyym Ubo Ahneg - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Preheated glue tube - Viscosity control - Device for producing padded cases - Pressing station - Pump Size range opened case (max): 670 x 390 mm Size range opened case (min): 205 x 140 mm Max. mechanical speed: 65 cycles/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Year of construction: 2007, condition: new, Case maker Hoerauf BDM Speed Year: 2007 The BDM Speed is a high speed casemaker with an output of 85 cases per minute, specially designed to meet the requirements of medium and large size companies, for the production of book cases with rigid or flexible spine, as well as one-piece cases for ring binders and letter files. Description: - Colour monitor - Automatic setting - Board pre stacking conveyor - Board magazin - Board cutter: KS - Centre strip infeed (stiff) - Centre strip infeed (flexible) - Cloth feeder - Glue unit - Viscosity control Cedpfxjvc Ub Ao Ahnorg - Device for producing quarter-bound cases in 2 passes - Pressing station - Stacking delivery - Pump Size range opened case (max): 680 x 380 mm Size range opened case (min): 190 x 130 mm Max. mechanical speed: Up to 85 cases/min Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer!

Condition: used, Year of construction: 2016, Format: 400 x 660 mm Power: Electrical Requirements: Net Weight: 370 kg Measurements: (L x W x H): 125 x 200 x Equipment: Touchscreen Operator Interface Vacuum Feed Table Pneumatic Gauge/Positioning Arms Mechanical 2-Stroke Turning-In Cycle Corner Style Selector Modular Integration Interface Production Speed: Up to 300 covers/hour Maximum Open Case Size: Without corner trimmer: 400 x 711 mm / With corner trimmer: 400 x 660 mm Codeyxqw Djpfx Ahnsrg Minimum Open Case Size: Without corner trimmer: 170 x 219 mm/ With corner trimmer: 170 x 229 mm Board Thickness: 1.5 mm to 3.5 mm Spine (Mellan) Width: 6.4 mm to 82 mm

Condition: used, Year of construction: 2021, Format: 530 mm Power: 1500 W Net Weight: 150 kg Measurements: 100 ?? 50 ?? 75 cm (Width ?? Equipment: Mechanical speed: 250 pieces/hour Rotating Doctor Blade System Integrated Viskositaetsoptimierung (AVC) Programmable Pre-Heat Timer Top-Side Sheet Transport Control Crjdpfx Ajyxqwwohnsg Maximum Working Width: 53.0 cm (530 mm / ~20.8 inches). It easily takes oversized SRA3 digital sheets or long banner covers fed horizontally. Substrate Capabilities: Optimized for delicate digitally printed sheets, high-gloss laminations, heavy textured cover stocks, and woven book cloths.

Year of construction: 2015, condition: used, Year: 2015 Condition: good, functional Crjdpfxezm T Sqj Ahneg Counter: 3,8M Automatic Wire-O Binding Line with Integrated Calendar Hanger Insertion The RENZ ABL 500 equipped with the KAS 300 IL unit is a professional industrial solution for the fully automatic production of calendars, brochures, catalogues and other Wire-O bound products. Thanks to its high productivity, fast job changeover and precise automation, it is one of the most efficient systems in its class and is ideally suited for commercial printing companies, bookbinding facilities and calendar manufacturers requiring maximum production quality and efficiency. Configuration - RENZ ABL 500 - KAS 300 IL – Integrated Automatic Calendar Hanger Insertion Unit - Tooling: - 1/4" - 5/16" Features - Fully automatic double-loop Wire-O binding - Automatic feeding of pre-collated punched book blocks - High-precision automatic wire closing - Automatic insertion of calendar hangers using the integrated KAS 300 IL unit - Fast format changeover via touchscreen control - High production capacity of up to 2,000 finished products per hour - Reliable operation designed for continuous industrial production - Robust construction ensuring long service life and low operating costs Technical Specifications - Maximum binding width: 500 mm - Minimum binding width: 70 mm - Maximum book thickness: 15 mm - Wire diameter: 5.5–19 mm (3/16"–3/4") - Wire pitch: 3:1 and 2:1 - Mechanical speed: 2,100 cycles/hour - Production output: Up to 2,000 bound products/hour - Format changeover time: Approx. 3 minutes - Closing bar changeover: Approx. 20 minutes - Power supply: 3/N/PE 400/230 V, 50 Hz - Installed power: 3.5 kW - Required compressed air pressure: 7.5 bar - Compressed air consumption: Approx. 450 l/min - Machine dimensions (L × W × H): Approx. 3,300 × 2,300 × 1,600 mm - Machine weight: Approx. 1,300 kg KAS 300 IL Calendar Hanger Insertion Unit The integrated KAS 300 IL unit automatically feeds, forms and inserts calendar hangers during the production process. It processes straight wire lengths from 80 to 300 mm and operates in perfect synchronization with the ABL 500 binding line. This enables the production of fully finished calendars ready for packaging without any additional manual operations. Applications: The machine is ideally suited for the production of: - Wall calendars - Desk calendars - Catalogues - Brochures - Manuals - Presentation materials - Sample books - Notebooks and other Wire-O bound printed products

Year of construction: 2021, condition: used, Year: 2021 Condition: very good Counter: approx. 4mil. Technical Specification: - Min./Max. sheet size: 80 × 100 mm / 360 × 650 mm (optional extended feeder: up to 360 × 850 mm) - Paper weight range: 80–400 g/m² - Programs: 20 programmable jobs - Minimum crease distance: 0.1 mm - Speed: up to 6,000 sheets per hour (A4 with 1 crease) - Power supply: 230 V / 50 Hz single phase - Power consumption: 1.5 kW - Weight: 116 kg - Dimensions: 40 × 65 × 116 cm - Optional accessories: perforation kit; extended feeder Credszgt Dyjpfx Ahnjg Equipment Description: The PIT STOP 36 is an automatic creasing and perforating machine with a working width of 36 cm, maintaining all the reliability and precision characteristics typical of machines manufactured by Bacciottini Group. The standard sheet size is 360 × 650 mm, with an optional extended feeder allowing processing of sheets up to 360 × 850 mm. The machine has been specially designed for print-on-demand applications and digital printing workflows. It is equipped with a creasing system using an adhesive matrix. The machine features a user-friendly 7-inch colour touchscreen display, allowing quick and easy setup of all creasing and perforating operations. The unit is mounted on wheels for easy mobility and helps maximize workspace efficiency, especially in areas where space is limited.