Mechanical swing bending machine

Schröder MAK 3 4000 x 1,5 mm

Condition: excellent (used), Year of construction: 2005, Technical data: Working length: 4050 mm Bending capacity: 2.5 mm Control: SCHRÖDER POS 2000 2D-graphic touch screen controlled axes: X / Y / Z / A / B / C Bending simulation Bending angle adjustment: 0 - 135° Opening upper beam: 300 mm Pneumatic tool clamping upper beam Work table with ball rollers: 4240 x 2500 mm Motor power: 7.5 kW Dimensions (length x width x height): approx. 5000 x 3000 x 1700 mm Weight: approx. 6.5 tons Accessories: 1 set of tools Bqxdz7M2 The seller is not liable for typing or data transmission errors. The machine is in appearance, technology and wear according to age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 1992, Sheet thickness steel (max.): 4 mm, Working width: 1,020 mm, Upper beam stroke: 250 mm, Motorized folding machine Fab. Schröder Typ. MAK II 1000/4,5 year 1992 Technical data Make: SCHRÖDER Type: MAK 2 Year of construction: 1992 Effective length: 1020 mm Capacity at 400 N/mm² 4.5 mm Stroke upper beam: 250 mm Adjustment of bending beam 50 mm Cxdqzhbw00 Bending angle: max. 135° Weight: approx. 2,140 kg Dimensions: approx. L 2.10 x W 1.90 x H 1.50 m Equipment - Manual backgauge with support table: 10 - 1000 mm - Double foot switch - 45° focus rail - Bending rails 10 mm, 25 mm All data without guarantee A demonstration is possible at any time in our showroom.

Year of construction: 1981, Condition: ready for operation (used), Machine/vehicle number: 6171, max. working width: 2520 mm for metal sheets up to: 2,5 mm opening width top clamping bar: ca. 250 mm adjustment bending cheek: 30 mm B7Zioxg7De clamping bar drive: 1,5 kW below cheek drive: 2,3 kW electrical connection: 380 V kW weight: 2300 kg space needed: 3300 x 1400 x 1430 mm

Condition: excellent (used), Year of construction: 1992, Sheet thickness steel (max.): 4 mm, Motorized guillotine shears Fab. SCHRÖDER Type. MHSU 1.020 x 4,0 Year 1992 Technical data Make: SCHRÖDER Cxaiplq7X0 Type: MHSU 1.020 x 4,0 Year of construction: 1992 Effective length: 1,020 mm Sheet thickness: 4 mm Cutting angle 2.4° Drive power 3.4 kW Dimensions: approx. L 1.50 x W 1.80 x H 1.20 m Weight: approx. 850 kg Equipment - Back gauge 750 mm controlled via Elgo control system - Sheet holding device to the front - Extended extendable support table - Continuous hold-down device with hard rubber strip - Foot switch All specifications without guarantee. A demonstration is possible at any time in our showroom.

Condition: good (used), Year of construction: 2006, A small SCHROEDER MHSU 1000/3.5 guillotine shear from 2006 is for sale. The machine is in good condition and can be inspected. SCHROEDER MHSU 1000/3.5 guillotine shears Manufacturer: Schröder Type: MHSU 1000/3,5 Dpsoer Condition: good, used Year of manufacture: 2006 max. cutting length: 1.030 mm cut in steel: 3,5 mm backgauge: manual L x W x H, approx. 1.5 x 1.5 x 1.5 m, weight, approx. 780 kg

Condition: good (used), 1 used sheet metal shear Schröder type MHSU 2000 x 2 mm year 1987 cutting width 2000 mm max. sheet thickness 2 mm motorized drive Fzhbvbg equipped with manually adjustable backgauge foot switch material supports

Condition: used, Year of construction: 2000, sheet width 3020 mm plate thickness 2,0 mm distance between columns 3000 mm Control POS 500 NC stroke 250 mm max. 135 ° adjustment UW 80 mm Cs73Dv2I back stop - adjustable 1000 mm work height max. 975 mm total power requirement 6,0 kW weight of the machine ca. 3350 kg dimensions of the machine ca. 4185 x 1650 x 1425 mm - Dynamic, powerful motorized swivel bending machine - SCHRÖDER POS 500 NC control unit with LCD display * Tool catalog with tool library * Manual, setup and automatic operation * Bending angle correction memory * Collision checking of the individual axes * quick programming of individual parts - swiveling control panel, right front - Electric back gauge, with sheet metal support surface * Travel 1,000 mm - manual lower beam adjustment - Free-moving double foot switch - Operation manual Machine will be available in approx. 6-8 weeks

Condition: used, Year of construction: 2011, Functionality: fully functional, used motorized guillotine shears make Schröder year of construction 2011 cutting width 3200 mm capacity 2,00 mm at 400 N/mm² B8Wfv9Kj manual backgauge extendable table support Machine is advertised on behalf of a customer. If interested, an inspection is desired in advance. Machine only for end customers, please no dealer inquiries. Location ALtstätten (CH) southern Lake Constance

Condition: good (used), Year of construction: 1982, Machine/vehicle number: 03042, Offer 23476 Technical data: - max. working width 1020 mm Gxaqh7I - max. material thickness 3.0 mm - cutting angle 2.7 ° - electr. foot switch - single stroke - continuous stroke preselectable - manual backgauge up to 500 mm - front pull-out sheet support - Drive 400 V / 2.5 kW - Space requirement approx. W 1450 x H 1200 x D 1400 mm - Weight approx. 900 kg

Overall weight: 10,500 kg, Maximum load weight: 5,980 kg, Axe configuration: 2 axles, Loading space length: 7,100 mm, Loading space width: 2,470 mm, Loading space height: 2,690 mm, First registration: 12/2007, Condition: used, Equipment: Abs, Tail-Lift, Equipment: Tarpaulin frame body, dimensions in length 7100x2470x2690mm, LBW 1500kg, high bulkhead, sliding doors left and right, air suspension, other: Payload 5,980 kg, total weight 10,500 kg Your reliable partner for everything to do with cars/commercial vehicles in 28832 Achim at Bremer Kreuz since 1972. The NutzfahrzeugZentrum Behnke always has approx. 200 vehicles from the areas of vans, commercial vehicles and construction machinery! We constantly offer you attractive financing options at favorable special conditions. If you are interested, we will be happy to make you an individual offer! Trade-in of your commercial vehicle is possible. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection. Gpiu7S Delivery of your "new" commercial vehicle by our external partners is possible for an additional charge. The information given in advertisements, on the Internet, price tags and pictures are non-binding descriptions and do not serve as guaranteed characteristics. The seller accepts no liability/warranty for typing and data transmission errors. Listed equipment must be checked separately if necessary. Subject to errors and prior sale.

Condition: used, Year of construction: 2015, sheet width 2000 mm E2Po20U plate thickness 2 mm distance between columns 2080 mm Control nano Touch total power requirement 4 kVA weight of the machine ca. 1,7 t dimensions of the machine ca. 3,1 x 1,5 x 1,7 m Inclined upper beam 45° with 2-part quick tool clamp Pre-switch off upper beam 15 mm Manual bending beam adjustment 25mm 2-way foot switch manual back gauge 750mm / 7 spring-loaded gauge fingers sharp nose blade 20°/ one-piece 2020mm long lower tool slim 10mm / one-piece 2020mm long lower tool thick 25mm / one-piece 2020mm long Goat's foot blade height 80mm / 2060mm total. length / segmented: Corner piece left 75 - corner piece right 75 30-50-55-60-65-70-75-100-200-200-500-500mm shims Crane suspension hooks are in the control cabinet

Condition: good (used), Year of construction: 2000, Sheet thickness steel (max.): 3 mm, Cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Make: SCHRÖDER Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment Gpa9D8 - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: good (used), Year of construction: 1997, Swivel bending machine Manufacturer: Schröder Type: MAK II - 2500 Year of construction: 1997 Control: POS 500 Bending length: 2,500 mm Sheet thickness: max. 2.5 mm Weight: approx. 3,700 kg R83Gpwoidx 081024ä

Condition: reconditioned (used), Functionality: fully functional, Dough dividing and rounding machine Fortuna Bread press size 3 Semi-automatic 30 pieces Header NEW revised Stainless steel knife NEW Dough insert up to 2550g, depending on TA Piece from 35 to 70g round/85g square Ca8Jvcmcl8 Output max. 7000 pieces/hour with 3 new active plates E-system new DGUV V3 tested Eccentric effective gear Connection 400V, 1 kW, 16A-CEE plug Dimensions: 580 x 580 x 1350 mm, WxDxH Used machine overhauled with 6 months warranty Visit our large sales warehouse with over 400 bakery machines!

Overall weight: 35,000 kg, Maximum load weight: 28,100 kg, Axe configuration: 3 axles, Loading space length: 13,240 mm, Loading space width: 2,490 mm, Loading space height: 3,500 mm, First registration: 12/2014, Condition: used, Total width: 2,550 mm, Total height: 4,000 mm, Schröder Wiesmoor ST 11/24 P4-13.5 Beverage carrier Vehicle number 3449 -MOT expired -2 lift axles -Tires 385/55R22.5 -Raiseable roof -BWP axles -Sp 11/2020 -Loading area 1st area 3.34 m x 2.49 m -Loading area 2nd area 3.30 m x 3.50 m -Loading area 3rd area 6.60 m x 2.68 m Ctbm2Bervu -Empty weight 6900 kg Subject to errors and prior sale

Condition: used, Used folding machine for sale. -Manufacturer: Schröder -Type: MAK II 2500/2,5 -Drive: Electric -Condition: Manual / Foot pedal -Adjustable bending angle cut-off -Bending length approx. 2500mm -Max. Sheet thickness at 2500mm 2.5mm -Transport dimensions width approx. 3 m, depth approx. 1.6m, height approx. 1.4m -Weight approx. 2000kg Forklift available for loading. Shipping on request You will receive an invoice without VAT. The differential taxation according to § 25 UstG applies to the sale, no sales tax will be charged. Cmjckl3Cs0 All information in the advertisements is non-binding to the best of our knowledge and without guarantee. Errors, misprints and prior sale expressly reserved! The specified performance data are manufacturer's specifications, these may vary due to age-related wear!

Condition: good (used), Year of construction: 1999, Swivel bending machine Schröder working length a little over 2,5m sheet thickness - iron 2,5mm see type plate - alu etc more Ekhb2Mp Control POS 400 Optional depth stop , segmented rail see pictures kl box ) Loading free of charge Suitable guillotine shear Schröder at the moment still available as well as other tools and machines (have 3 Schröder 2.5m to 3mm in stock)

Condition: good (used), Year of construction: 2000, Sheet thickness steel (max.): 3 mm, Working width: 1,020 mm, Motorized folding machine Fab. Schröder Typ. MAKV 1000/3,0 Year 2000 Technical data Effective length: 1020mm Capacity at 400 N/mm² 3.0mm Upper beam stroke: 250mm Lowering of bending beam 80mm Weight: 1.650kg Dimensions: 1.95m x 1.4m x 1.2m Equipment POS 400 control system for bending angle and upper beam adjustment Manual backgauge: 10-750mm Tool package: Bending rail 25mm 30-degree focus rail Segmented goose foot height 90mm Ueruta0Xwf All information without guarantee A demonstration is possible at any time in our exhibition hall.

Condition: like new (used), Year of construction: 2020, Operating hours: 5,480 h, Functionality: fully functional, Machine/vehicle number: 39000103, Bending angle: 90 °, Sheet thickness steel (max.): 3 mm, Sheet thickness aluminum (max.): 3 mm, Sheet thickness copper (max.): 3 mm, Sheet thickness brass (max.): 3 mm, Sheet thickness (max.): 3 mm, Working width: 3,240 mm, Total length: 3,200 mm, Total height: 230 mm, Total width: 4,000 mm, Overall weight: 6,235 kg, Upper beam opening width: 350 mm, Type of input current: three-phase, Input voltage: 400 V, Height adjustment type: electric, PowerBend Professional 3200 / 3 Dpexal - Operation from both the front and back of the machine - All axes managed and controlled - Interpolated blade movement with double side motor ( 2 x 2.2 Kw ) - Interpolated blade movement with double side motor ( 2 x 3 Kw ) - Blade press with 180° structure - Hydraulic closing device for blade press tools ( WZS 2000 ) - Pneumatic closing device for bending blade tools - 2 Double foot pedal with protection - Color RAL 7035 light grey / RAL 5003 sapphire blue

Year of construction: 1995, Condition: good (used), Machine/vehicle number: 200034, 3000 x 3, 0 mm, 4.0 mm steel, 1.5 mm aluminium, with an automatic hold-down device. ITEM 100 E control for motorised back gauge, squaring fence, 2 front support arms on linear rail 0.5-3 mm under the stop manual adjustment of the cutting gap is adjustable, a sheet transport and stacking device attached to the removal and drop the clippings, compressed air connection required, security available, machine repaired by a qualified technician, tested, cleaned fencing and light barrier and is fully functional. Test run is performed. Rear stop adjustable: 8-1000 mm Color: grey/blue Total power consumption: 32 A Bc0Smydres Machine weight approx.: 4000 kg Dimensions: 4000 x 1600 mm with cutting gap adjustment without cutting angle adjustment

Overall weight: 35,000 kg, Maximum load weight: 28,100 kg, Axe configuration: 3 axles, Loading space length: 13,240 mm, Loading space width: 2,490 mm, Loading space height: 3,500 mm, First registration: 11/2014, Condition: used, Total width: 2,550 mm, Total height: 4,000 mm, Schröder Wiesmoor ST 11/24 P4-13.5 Beverage carrier Vehicle number 3449 -MOT expired -2 lift axles -Tires 385/55R22.5 -Raiseable roof -BWP axles -Sp 05/2021 Dpp38D -Loading area 1st area 3.34 m x 2.49 m -Loading area 2nd area 3.30 m x 3.50 m -Loading area 3rd area 6.60 m x 2.68 m -Empty weight 6900 kg Subject to errors and prior sale

Overall weight: 36,000 kg, Axe configuration: 3 axles, Loading space length: 13,400 mm, Loading space width: 2,460 mm, Loading space height: 800 mm, First registration: 10/1994, Suspension: air, Color: red, Tire size: 385 / 65 R 22,5, Condition: used, Mileage: 1,001 km, Gearing type: other, Total length: 2,540 mm, Total width: 3,000 mm, Driver cabin: other, Equipment: Abs, Vehicle location: Bovenden, 3-axle, BPW axles, air suspension, 1st axle liftable, last axle positively steered, lifting+lowering, ABS (anti-lock braking system), storage box last axle positively steered via wedge, intended for mounting roller crane ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - . Uxq7E8Qn

Condition: excellent (used), Year of construction: 2013, Motorized guillotine shears Fab. Schröder Typ. MHSU 1500/4.0 Year 2013 Technical data Make: Schröder Type: MHSU 1500 x 4.0 Year of construction: 2013 Effective length: 1530 mm Sheet thickness: 4 mm (400 N/mm) Dimensions: approx. L 2.10 x W 1.85 x H 1.2 m Weight: approx. 1.25 t Equipment - Controlled backgauge 750 mm Hu2Qp8O - Continuous hold-down device with hard rubber strip - Pneumatic sheet holding device - Rear guarding in accordance with UVV safety package - POS 100 control unit - Extended, extendable support table All information without guarantee. A demonstration is possible at any time in our showroom.

Overall weight: 35,000 kg, Maximum load weight: 28,100 kg, Axe configuration: 3 axles, Loading space length: 13,240 mm, Loading space width: 2,490 mm, Loading space height: 3,500 mm, First registration: 12/2014, Condition: used, Total width: 2,550 mm, Total height: 4,000 mm, Schröder Wiesmoor ST 11/24 P4-13,5 Beverage carrier Vehicle number 3512 -MOT expired -2 lift axles -Tires 385/55R22.5 -Raiseable roof -BWP axles Ctbowupwwi -Sp 07/2021 -Loading area 1st area 3.34 m x 2.49 m -Loading area 2nd area 3.30 m x 3.50 m -Loading area 3rd area 6.60 m x 2.68 m -Empty weight 6900 kg Subject to errors and prior sale

Condition: excellent (used), Year of construction: 2009, Sheet thickness steel (max.): 2 mm, Cutting length (max.): 1,530 mm, Mechanical guillotine shears Fab. Schröder Typ. MHSU 1500/2,0 Year 2009 Technical data Make: Schröder Type: MHSU 1500/2,0 Year of construction: 2009 Effective length: 1530 mm Sheet thickness: 2 mm (400 N/mm) Dimensions: approx. L 1.90 x W 1.30 x H 1.2 m Weight: approx. 840 kg Equipment - Manual backgauge 500mm - Hold-down device with hard rubber strip Dnwuul - Sheet holding device mechanically controlled to the rear incl. sheet chute - Rear area protection via light barrier - Support arms 1600 mm - Angle stop 1600 mm All data without guarantee. A demonstration is possible at any time in our showroom.