Plate shear

Schröder MHSU

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, Sheet width: 1250 mm Sheet thickness: 3 mm Kodpfx Acoxwvw Rsuedw Machine weight approx.: 1120 kg Dimensions: 2100 x 2500 x 1500 mm Accessories: - Front sheet support arms with digital display - Safety guard at the rear of the machine - Manual rear stop with digital display - Foot switch

Condition: good (used), Year of construction: 1991, machine/vehicle number: 120622, Offer 25305 Technical Data: Kedpfxjxqd H Te Acuodw - Max. working width: 2520 mm - Max. material thickness: 2.5 mm - Cutting angle: 2.2° - Strokes per minute up to: 25 1/min - Rear gauge with ELGO positioning control up to: 750 mm - Table height: 850 mm - Front angle stop: 2000 mm - Extendable front sheet support up to: 920 mm - 2 front support arms: 1000 mm each - Pneumatically assisted sheet holder, including front sheet chute - Electric foot switch - Inch/Single stroke selectable - Drive: 400 V / 3 kW - Space requirement approx. W 3450 x H 1150 x D 1700 mm - Weight approx.: 1600 kg

Condition: good (used), functionality: fully functional, Year of construction: 1994, Used SCHRÖDER motorized guillotine shear, type MHSU, built in 1994, No. 121204 Usable length: 1030 mm Max. sheet thickness: 2.5 mm - Pneumatic hold-down device - Front support arms 1000 mm - Digital back gauge 750 mm - Right-angle stop - Sheet support device Kodpev Tzphefx Acuodw - Forward sheet slide - Rear area protection with protective cage - Foot switch The machine is in stock at our location in 71334 Waiblingen-Beinstein and is available immediately.

Condition: good (used), Year of construction: 2000, sheet thickness steel (max.): 3 mm, cutting length (max.): 1,020 mm, Mechanical guillotine shears Fab. SCHRÖDER Typ. MHSU 1020 x 3mm Year 2000 Technical data Make: SCHRÖDER Kdsdpeulrx Tsfx Acuew Type: MHSU 1000 x 3mm Year of manufacture: 2000 Sheet width: 1000 mm Sheet thickness: 3 mm Space requirement: LWH approx. 1.40 x 1.50 x 1.30 m Weight: approx. 720 kg Equipment - Manual backgauge - Operating instructions - Cutting edge lighting - Continuous hold-down device with hard rubber strip - Machine feet All specifications without guarantee. A demonstration under power is possible at any time in our showroom.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Seldom used guillotine shear, only occasionally for 1.5 mm sheet thickness. Stroke rate: 56/min. Capacity (Rm 400/mm): 3.5 mm. Rated power: 4.0 kVA. Weight: 860 kg. Kdedpoxal Uwefx Acuew

Condition: good (used), Year of construction: 1999, machine/vehicle number: 121841, Offer 25317 Technical data: - Max. working width: 2020 mm - Max. material thickness: 3 mm - Strokes per minute: up to 32 1/min - Cutting angle: 2.0° - Motorized backgauge: 5 - 500 mm - Front material chute Kdsdpfx Aoxc Ei Hjcujw - Rear area safety guard - Extendable front material support - Electric foot pedal - Single stroke or continuous stroke selectable - Drive: 400 V / 4 kW - Required space: approx. W 2450 x H 1180 x D 2300 mm - Weight: approx. 1300 kg

Condition: used, sheet width 4080 mm plate thickness 2.0 mm ST thickness at "Niro-steel" 0.8 mm Sheet thickness for ALU 2.5 mm cutting angle 1.3 Grad no. of strokes 34 Hub/min distance between columns 4310 mm back stop - adjustable 15.0 - 750 mm table height 820 mm Control ELGO engine output 9.0 kW Kdodpfx Acsxabc Reuew weight of the machine ca. 3600 kg. range L-W-H 5250 x 2200 x 1400 mm Good condition (!!) Current new price approx. €70,000 Special price upon request The MHSU motor-driven guillotine shear is based on a torsion-free, rigid welded construction and a dynamic, quiet, and powerful gear motor. High static and dynamic rigidity is ensured by robustly dimensioned main components such as the cutter bar, support table, side supports,and the main drive unit. The motor- driven guillotine shear was developed forsheet metal and plastics processing. With these shears, you can effortlessly produce clean cuts in series. Features: - NC robust, motorized swing cut guillotine shears - with ELGO NC control unit * Digital position display of the backgauge * Adjustable from the front right * With target/actual value input * Continuous adjustment across the entire travel range * Limit switch protection - NC motorized material/backgauge - Shatter-proof, torsion-free welded steel construction - Compact and clearly arranged machine design - Support table with recessed grips - 1x hold-down bar - 1x side stop with T-slot and scale - 3x front support arms - 1x freely movable foot switch - Operating instructions Optional accessories included: - Pneumatic sheet metal holding device for thin sheet metal blanks