SEIGER SLZ 500E

SEIGER SLZ 500E

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 3,000 rpm, travel distance X-axis: 260 mm, travel distance Z-axis: 1,500 mm, spindle motor power: 20,000 W, total height: 1,900 mm, total width: 2,100 mm, overall weight: 3,500 kg, controller manufacturer: HEIDENHAIN, controller model: MANUAL plus 620, product length (max.): 3,300 mm, number of axes: 3, Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine. - Spindle Speed: 1 - 3,000 RPM (Stage 1: 1 - 750 RPM, Stage 2: 1 - 3,000 RPM)- Spindle Power (100/60% ED): 20 / 25 kW- Taper Size: DIN 55027 Size 8 (Main Spindle Nose) / MT 5 (Tailstock Quill)- Tool Stations: 8-station Sauter disc turret + Parat 4-way quick-change holder Size 3- Through-Spindle Coolant: No- Counter Spindle: No- Max. Bar Diameter: 78 mm (through Schunk chuck) / 93 mm (spindle bore)- Max. Workpiece Diameter: 500 mm (swing over bed) / 280 mm (swing over cross slide)- Max. Tool Weight: No info- Driven Tools: Yes (Sauter 8-station disc turret for driven tools, VDI shaft D=30 mm with digital servo motor)- Positioning Accuracy: According to DIN 8605- X-axis Travel: 260 mm- Z-axis Travel: 1500 mm (center distance)- C-axis Specification: Pneumatically engaging with digital motor and gear drive on main spindle (Spindle speed up to 15 rpm, Torque ca. 420 Nm)- Bed Width: 350 mm- Turning Tool Cross Section (H x W): 25 x 25 mm- Spindle Diameter in Front Bearing: 130 mm- Inner Taper of Main Spindle: Metric 100- Maximum Spindle Torque: approx. 1400 Nm- Feed Force Z-axis: 10,000 N- Feed Force X-axis: 7,000 N- Feed Range (Longitudinal/Planar): mm/rev- Rapid Traverse Speed X/Z: 10 / 7 m/min- Tailstock Quill Diameter: 90 mm- Tailstock Quill Stroke: 180 mm- Max Workpiece Weight (Between Centers): 1,000 kg (1,250 kg with steady rest)- Max Workpiece Weight (Flying in Chuck): 300 kg (at 200 mm center of gravity distance)- Operating Voltage: 400 V / 50 Hz- Control Voltage: 24 V DC- Connected Load: 41 KVA- Current Rating: 60 A- Main Fuse: 63 A Pedpfx Aozvx Agsnyerb - Additional Equipment: - Chip protection wall, 2 movable sliding safety doors with windows, machine light, Quick-change tool holder size C, coolant device, live center MT 5, operator tool set, linear scale in X-axis, safety clutch in X and Z axes- Chip Conveyor: discharge height 1000 mm, length 535 mm, 60-degree gradient, continuous feed, ca. 250 dm³/h capacity, speed ca. 2 m/min- Two-speed Planetary Gearbox: Item 6054375, automatically shifting, flanged on main spindle motor- Parat 4-Way Turret Quick-Change Holder: Size 3, manually operated, mounted on zero-point clamping system- Sauter 8-Station Disc Turret for Driven Tools: VDI shaft D=30 mm with digital servo motor, mounted behind turning center- Boring Block: with VDI 50 retainer and internal coolant supply, mounted on zero-point clamping system in front of turning center- Zero-Point Clamping System: base part mounted on cross slide- Hydraulic Hollow Clamping Unit: Schunk ROTA THW plus D=315 mm 3-jaw chuck with DIN 55027 Size 8 mount and 78 mm bore passage- Reinforced Coolant Pump: (2.5 bar at 40 L/min, max 5.