SIPA horizontal drilling machine

SIPA

Condition: ready for operation (used), working length: 3000 mm working height: 1600 mm 3 vertical actuators 2 horizontal actuators manual operation mode pump motor power: 2.2 kW 1000 kg Nedjzww Epopfx Aiiolf

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers. The line is suitable for still and carbonated soft drinks and includes a blow moulder with compressed air generator, rinser/filler/capper, labeller, packer, palettizer, stretcher, conveyors inspection systems, CIP-unit. The line reaches up to 8,000 bph at 1,5 l and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  - Capacity: - 8,000 bph at 1,5 l  - Formats: - 0,5 l and 1,5 l bottles - Filling product: - Water and carbonated soft drinks - Closure system: - Plastic screw caps - Sport caps - Packing: - Shrink pack: 3x2 formation at 0,5 l and 1,5 l PET bottles - Pallet type: - Euro (1,200 x 800 mm) - Düsseldorfer (600 x 800 mm) Scope of Delivery  - Blow moulder: SIPA, year 2002 - Compressed air generator: Kaeser, year 2002 Nlsdjzvuwyepfx Aiijf - Rinser/filler/capper: Procomac, year 2000 - Number of rinsing nozzles: 24 - Number of filling valves: 24 - Number of capping heads: 6 - Labeller: Futura, year 2000 - For the labelling of opp labels with hot melt - Inspection device: Logics & Controls, year 2000 - For the control of fill height, capping and label - Shrink packing machine: Krones TFS Variopack, year 2001 - Handle applicator: Twinpack, year 2001 - Tray labeller: Logopack, year 2001 - Pallet stretcher: Born, year 2001 - Palletizing unit: Levanti / Profipack - CIP-unit: Corosys, year 2012 - CO2-degassing unit: Corosys, year 2012

Condition: used, Year of construction: 2009, Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Nlodszu Icyspfx Aiief - Manufacturer: SIPA (Italy) - Model: SFR 8 - Year of manufacture: 2009 - Machine type: rotary stretch-blow moulder for PET bottles - Number of cavities: 8 - Output: up to 12,400 bottles/hour - Bottle formats: 0.5 l, 0.75 l and 1.5 l - Neck finish: 28 mm / 1881 (short neck) - Electrical connection: 400 V, three-phase - Total connected load: 147 kW - Location: Germany Included in the sale - Four sets of blow moulds with eight cavities each: two sets for 1.5 l, one for 0.75 l and one for 0.5 l - Preform feeding system - Chiller - Machine-mounted touchscreen control panel - Full safety enclosure with viewing windows Not included - Preform hopper (can be custom-made) - High-pressure compressor Condition The machine is in very good condition and has been maintained regularly by the manufacturer. It is still installed and under power and remains in regular production, so it can be inspected in operation on site. Availability The machine remains in production until 30 September 2026. Dismantling and loading onto the buyer's trucks will take place between 10 and 14 October 2026 and can be carried out by the seller. The machine is located in Germany.

Condition: used, Year of construction: 2009, machine/vehicle number: SO144, Technical Specifications & Performance DataThe SIPA SFR 8 is a rotary PET stretch blow molding machine designed to form PET bottles from preforms for beverage production and industrial packaging applications. Manufactured in 2009, this machine provides a stated production capacity of 12,400 bottles per hour. Its rotary architecture supports continuous bottle production and is suitable for integration into a used bottling line where consistent container supply is required ahead of filling, capping, labeling and secondary packaging equipment.Manufacturer: SIPAModel: SFR 8Year of manufacture: 2009Production capacity: 12,400 bottles per hourBlow mold configuration: 4 mold sets with 8 cavities eachPreform neck finish: 28mm / 1881 short neckSupported bottle formats: 0.5L, 0.75L and 1.5LContainer material: PETAdvanced Automation & Control SystemsThis rotary stretch blow molder is intended for automated PET bottle manufacturing, transforming heated preforms into finished containers through the stretch-blow molding cycle. The supplied preform feeding system supports controlled preform handling into the machine. Rotary blow molding equipment is typically operated through coordinated process controls that synchronize preform transfer, heating, stretching and blowing stages.The machine is supplied with its preform feeding system and chiller. These components support a more complete blowing package by providing preform infeed capability and process cooling. The high-pressure compressor is excluded, so compressed-air infrastructure must be planned as part of installation and commissioning.Production Line Integration CapabilitiesThe SIPA SFR 8 can operate as the bottle production stage of a PET used bottling line. It is positioned upstream of filling monoblocks, labeling machines, shrink wrappers, handle applicators and palletizing systems, producing PET containers for onward handling in a beverage production line. The available mold sets provide flexibility for 0.5L, 0.75L and 1.5L bottle formats, subject to the installed mold and associated line setup.The supplied preform feeding system supports integration with preform handling equipment. A preform hopper is not included, allowing the buyer to configure a hopper solution according to site layout, autonomy requirements and preform logistics. The 28mm / 1881 short-neck finish should be matched with compatible preforms, closures and downstream filling equipment.Machine Condition & Maintenance HistoryThe machine is described as being in very good condition and regularly maintained by the manufacturer. It remains operational until September 30, 2026, indicating that it is currently in production rather than stored or decommissioned. This operating status gives prospective buyers the opportunity to evaluate the machine as part of an active production environment before dismantling.Planned dismantling and loading will follow the end of operation. Buyers should arrange site assessment, technical verification and transport planning in coordination with the removal schedule.Operational Performance & VersatilityDesigned specifically for PET bottle manufacture, the S... Njdpfx Aieztwmfjiolf

Condition: used, Swiveling aggregate, chain width 10 mm Nsdpevvku Eofx Aiijlf Storage location: Nattheim

Condition: excellent (used), Shelf length 2500 mm Shelf width 1300 mm 4 hydraulic pistons Nlsdpfxoyw H H Ss Aiief Clearance 400 mm Water heating

Condition: used, functionality: fully functional, SIPA shelving press for veneering, 2500 × 1280 Shelf length: 2500 mm Njdpszmglqjfx Aiiolf Shelf width: 1280 mm Loading height: 440 mm Operating pressure: 120 bar Press with 4 cylinders Shelves heated with water from the boiler.

Condition: used, Year of construction: 2008, Overview This blowing machine was manufactured in 2009 by Italian manufacturer SIPA. The machine was part of a complete non‑returnable PET bottle filling line dedicated to juices production. It was used to produce small formats as 0.2 - 0.25 and 0.5 L PET bottles and operated at a nominal speed of 12,500 bottles per hour. The machine is described as being in perfect condition since it had been dedicated for a small private label production. The equipment becomes available as the seller has finished the production dedicated to fruit juices. Technical data - Capacity: 12.5000 bottles/hour - Year of manufacture: 2009 - Formats: 0.2 - 0.25 and 0.5 L - Application: Juices - Container material: PET - Neck finish: 38 mm - Air conveying system available Scope of supply - blow moulder Sipa SFR EVO 8 (2009) - preform feeding - preform container - preform tilting device Nsdjzb Adtepfx Aiiolf - spare parts available - air conveying system available

Condition: used, Year of construction: 2017, Rotary stretch blow molding machine for blowing PET bottles from preforms. Preforms are poured from a container into the feed hopper via a tilting device. From there, the preforms are fed out via an ascending belt with electronically controlled speed and are transported to the blow molding machine in a uniform orientation via a chute and loading star wheel. The shape and size of the preforms are checked and defective preforms are ejected before they are fed to the heating boxes via a mechanical star wheel. In the heating boxes, the preforms are preheated with infrared lamps. They are continuously rotated to ensure symmetrical heat distribution. Fans prevent overheating on the outside. Finally, the preform temperatures are checked using an optical pyrometer. Grippers feed the preforms to the blow wheel and remove them from it. The blow molding unit works with “crocodile molds,” in which expansion along the longitudinal axis is supported by a stretching rod. The preforms are then blown into PET bottles. The stretch-blown bottles are removed from the cavities by grippers and conveyed to the ejector. Additional title: rotational molding machine Capacity: 18000 bo/h Number of cavities: 8 pcs. Number of bottles to be ejected per stop: 202 pcs. Blow pressure: 30 bar Power: 58 kW Voltage: 400 V Frequency: 50 Hz Water: 4 bar Compressed air: 360 Nm3/h at 7 bar Weight: 16700 kg Formats: 0.5 l; 1.0 l; 1.5 l PET bottles Features: Preform feed hopper with tilting device for containers, inclined belt conveyor for preforms, preform inspection, heating boxes, blow wheel; bottle ejector; visualization on screen Nledpfx Aexyktleiiof

Condition: used, Year of construction: 2008, Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. Table of Contents Introduction Overview of the Sipa Rotary Blow Molding Machine 2008 Features and Specifications Benefits of the Sipa SFR8 Applications Maintenance and Care Tips for Choosing a Used Machine Safety Features and Manuals Current State and Availability 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let’s explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Rotary Blow Molding Machine 2008 is manufactured by Sipa, a reputable company known for its innovative solutions in the packaging industry. This machine, specifically the SFR8 model, was introduced in 2008 and has gained recognition for its exceptional performance. 3. Features and Specifications The Used revised Sipa Rotary Blow Molding SFR8 comes with a range of features and specifications that make it stand out in the market: Year: 2008 Manufacturer: Sipa Model: SFR8 Nlsdpfsvgufiox Aiisf Speed: 12000 BPH (Bottles Per Hour) Containers: PET (Polyethylene Terephthalate) Formats: 0.50 L Additional details of the machine include: No. of cavities: 8 Preform loader: Yes Preforms tipper: Yes Preforms unscrambler: Yes Compressor: Not stated Chiller: No Preform neck type: 1810 Air recovery system: Yes Type: Rotary 4. Benefits of the Used revised Sipa Rotary Blow Molding SFR8 Investing in the Used revised Sipa Rotary Blow Molding offers several advantages: Efficiency: With a speed of 12000 BPH, the machine ensures high productivity and optimized production cycles. Precision: The SFR8 provides precise molding capabilities, resulting in consistent and high-quality bottles. Versatility: It accommodates PET containers and supports the format of 0.50 L, making it suitable for various industries and applications. Reliability: Sipa is known for its durable and reliable machines, minimizing downtime and maintenance costs. Innovative Features: The machine incorporates advanced features such as preform loaders, tippers, unscramblers, and an air recovery system for enhanced efficiency.