CI flexographic printing press

Soma Optima / GEARLESS

Condition: used, Year of construction: 2017, Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: increments of 0.1 mm; correction ±2% Ijdpfx Ahex H Unvsueal Anilox roller internal diameter: 136.989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Gas drying Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems Central chiller for temperature stabilization (Hyperchill ICE039) Ionisation system (SIMCO) Side-lay control (Erhardt+Leimer) EFFICIENCY maximum mechanical speed: 500 m/min FALCON – automatic print register and impression setting Advanced print inspection system FAST BLADE – integrated doctor blade quick-change system INKSTORM – automatic wash-up system (optional feature) Bosch Rexroth INDRAMAT direct-drive technology JOB MANAGEMENT – remote job preparation from PC PRINT QUALITY CDTS – central cylinder thermal stabilization system PCTS – thermal stabilization for anilox and plate cylinders PPP – printing plate protection DYNAMIC IMPRESSION – electronic compensation of inking unit impression forces Machine design focused on high print stability with composite graphite sleeve EASY OPERATION Intuitive touch screen Easy access to web path Doctor blade chambers with FASTBLADE quick-change system FASTADAPT – automatic chamber positioning adjustment

Condition: used, Year of construction: 1997, functionality: limited functionality, product width (max.): 510 mm, working width: 505 mm, • Model: Gallus Arsoma EM 510 • Year of Manufacture: 1997 • Web Width: 510 mm • Printing Units: 7 x UV flexo units • Die-Cutting Units: 2 • UV Drying: Included • Glue: Included • Barcode Printing Capabilities: Supported • Web Turnbar (Turner Bar): Included • Web Cleaning: Included Ijdpfx Ahsw Ec Smjueal • Roll-to-Sheet Conversion: Included • Unwinder: Included • Rewinder: Included • Chiller: Included

Condition: ready for operation (used), Year of construction: 2015, A Brazilian machine, with good representation in London, for the production of filled pasta is available. Two intermeshing augers for the dough, one auger for the filling. Capacity: 20kg-100kg/h. Formats: savory or drop, kibbeh, pillow, ball and croquettes. Compared to Italian ravioli machines, this machine can work with considerably moister doughs and fillings. The machine works accurately to the gram while adhering to the original recipes. Dimensions X/Y/Z: 650mm/1150mm/1400mm, weight: approx. 200kg. Documentation available. Iedpjtryk Ejfx Ahusal

Condition: excellent (used), Year of construction: 2008, Offer for Gearless Flexo UTECO ONYX 876 with 8 colors, year 2007, and 1200 mm width. Fully equipped, can be seen in operation here in Europe. Iaedsxf Nynjpfx Ahujl

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and blank separation - as is - System equipped with a high-performance sheet feeder designed for automatic NON-STOP operation ⦁ For fully automatic punching, creasing, and embossing with or without gripper edge ⦁ For removal of internal waste as well as lateral and rear sheet edges ⦁ For stack-like delivery of punched and waste-removed sheets with attached gripper edges or ⦁ For separation of gripper edges and subsequent stack-like delivery of the remaining sheets ⦁ With a patented gripper carriage registration system for highest registration accuracy ⦁ With a pile stacker machine enabling fully automatic interleaving sheet feed as well as NON-STOP stacking and does not require modification even for the smallest job sizes (exchange table with comb structure) ⦁ Interleaving sheet magazine with electronic level monitoring, refillable during production ⦁ With Centerline equipment ⦁ With automatic pallet change device at the delivery section Specification Maximum sheet size: 760 x 1060 mm Minimum sheet size: 350 x 400 mm Isdeww E Nrjpfx Ahueal Maximum punching force: 3.3 MN (330 t) Speed: 9,000 sheets/hour Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet warp 4%) Equipment: Optical sheet register (Dyset) Automatic non-stop feeder Waste removal station Blank separation station Centerline Fully automatic pallet changing device at delivery Incl. platform Quick-lock frames at all tooling stations

Year of construction: 2007, condition: excellent (used), Inline can / jar washer & dryer Ijdpoh Eazzjfx Ahusal Completely stainless steel Container Max 180mm wide & 250 hight as-is or tested and adjusted to costomer needs

Condition: good (used), Seamer Make: Lubeca Typ: automatic 6-head seamer for round cans Model: LW 202 Iaodpfxoiba E Ds Ahusl Tooling: can size ø 85 mm – EO lids Capacity: up to 12.000 cans per hour Range: diameter 52-113mm / Hight 50-180mm Frame: cast iron lacquered Power supply: 380 V – 50 Hz – 4 kW Dimensions: L x W x H = 700 x 1.200 x 1.600 mm Weight: 600 Kg as-is or adjusted to customer needs

Condition: good (used), Year of construction: 2004, General information: • Manufacturer: Edale Ltd. (UK) • Model: Sigma • Year of Manufacture: 2004 • Condition: Very good, regularly serviced • Availability: Immediately Technical Specifications: • Printing units: 8 x UV flexo o Configurable as 8 front-side or 4 front + 4 reverse • Die cutting units: 2 • Web Width: 510mm • Conversion Options: Roll-to-roll and roll-to-sheet • Turn bars: 2 (for front/back printing) • Register Control: Included • Drying System: UV curing on all units • Inspection: Camera-ready setup possible • Applications: Labels, films, flexible packaging, paper and carton • Included Accessories: Magnetic cylinders, printing cylinders, anilox rollers Iaodpfx Ahewmfzgeuel • Unwinder: Included • Rewinder: Included Additional details: • The machine is fully operational and has been well maintained. • Ideal for short to medium production runs with high flexibility. • All documentation available. _____ Technical and Optical Condition: • Technical: 9/10 (checked and in excellent running condition) • Optical: 8/10 (cleaned and ready for immediate end-user deployment) _____

Condition: good (used), offer flexo printing press KBA NG10, year 2009, 1320 mm wide, Gearless; 8 colors; Gas drying; quick change of Anilox sleeves and sleeves; GAMA viscometers; video camera AVT Jupiter, year 2018. Iaodpfst Ipbdjx Ahuel

Year of construction: 2010, condition: excellent (used), functionality: fully functional, Manufacturer: CFS (GEA) Type: Compact 420 Year: 2010 Electrical connection: 28 kW, 42 A, 400 V, 50 Hz Labelling machine: Manufacturer: CFS Type: TiroLabe TL-150 Year: 2010 with gas flushing Iodortq I Ejpfx Ahueal including 4 format sets Condition: very good The metal detector and Espera conveyor visible in the picture are not part of this offer. They are separate machines.