Extraction system Spänex

Spänex

Condition: new, Year of construction: 2026, functionality: fully functional, input voltage: 400 V, total height: 2,000 mm, total length: 2,540 mm, total width: 900 mm, overall weight: 750 kg, Equipment: CE marking, documentation/manual, Type A according to DIN EN 16770:2018, without fire extinguishing system, tested according to the testing principles GS-HM-03 of the BGHM. The dust extractor is a mobile suction and filter unit for commercial use, designed to be placed in the work area. The dust extractor is suitable for collecting, conveying, and separating dry wood, paper, or plastic shavings and dust from various machining machines. Consisting of a vacuum-resistant housing with a suction nozzle and check valve, antistatic and water- and oil-repellent filter elements with jet-pulse cleaning, a high-performance radial fan arranged on the clean air side with a three-phase motor of energy efficiency class IE3, as well as integrated exhaust noise reduction and air outlet grille. Equipped with 2 swivel and 2 fixed casters, 2 chip collection containers with filling bags, and a control unit with a 5 m connection cable and CEE plug. The control unit is designed for automatic operation. The automatic start control for a maximum of 6 machines and the automatic filter cleaning with runtime addition are included. For the automatic start, either take-off coils or potential-free contacts of the machine can be used. 1K PVC single-layer coating in RAL 9006 (white aluminum). Delivered in a fully assembled, ready-to-use condition. For cleaning, compressed air prepared on-site must be provided at the device. (Connection via a quick-connect nipple, NW 7 / 6 bar). Technical data: Suction nozzle: Ø 250 mm (flange) Residual dust content: < 0.1 mg/m³ H3 Filter area: 21 m² Cleaning: offline - compressed air jet-pulse Compressed air supply: 6 bar (connection via quick-connect nipple NW 7) Volume flow: 4,500 m³/h Rated volume flow: (at 20 m/s in the suction nozzle): 3,530 m³/h Vacuum (at the suction nozzle at rated volume flow): 2,700 Pa Sound pressure level MAX (distance to the device 1 m): 67 dB (A) Hsdpfx Aqoz R Dd Djgofn Fan motor: 5.5 kW, 230/400 V, 50 Hz, 3,000 min -1, IP 54 Operating mode: continuous operation, intermittent Collection volume of filling container: 2 x 165 liters Dimensions (L x W x H): 2,130 (2,540) x 900 x 1,962 mm Weight: approx. 705 kg

Condition: used, Year of construction: 2007, Filtration with briquette press 3435H Press group 4 kW Briquettes 120/45 mm Automatic dewatering Automatic start mode with workshop machines Hodpfx Aez Rpqveqgefn Temperature probe with water-extinguishing in case of emergency 400V

Condition: ready for operation (used), Year of construction: 2014, Spänex SMU 6000.1 Extraction diameter: 300 mm Motor power: 7.5 kW H3 tested 2 bins of 165 l each Hsdpfxsxlk Tvs Aqgjfn Space requirement: 2710 x 900 x 1965 mm Price: 10,000.- Condition: Function tested

Condition: used, Year of construction: 2023, operating hours: 2,600 h, functionality: fully functional, total width: 18,500 mm, total length: 23,000 mm, compressed air connection: 6 bar, type of input current: three-phase, input current: 500 A, power: 275.5 kW (374.58 HP), space requirement length: 23,000 mm, space requirement width: 18,500 mm, For sale is a state-of-the-art, fully integrated wood pelletizing and shredding line (built in 2023) for processing A1-grade waste wood and disposable pallets into high-quality heating pellets. This turnkey complete system covers the entire process, from material feed to two-stage shredding, metal separation, suction and filtration technology, pelletizing, cooling, and bagging into big bags or smaller containers. Equipment: * Automatic scraper floor hopper with feeding system * AMIS shredder ZWS 1700 Hfsdjzhbf Iepfx Aqgjn * High-performance cutting mill * Belt conveyor magnet and metal separator * SPÄNEX suction and filtration system with fire protection * GreCon spark detection system * 10 m³ material hopper with dosing system * 2 × ECOKRAFT pellet presses LP22 * Rotary screen systems with conveyor belts * Big bag system and semi-automatic bagging system Technical data: * Year of manufacture: 2023 * Total connected load: 275.5 kW * Required fuse rating: 500 A / 400 V * Production capacity during test run: approx. 460 kg/h * Space requirement: approx. 23 × 18.5 m The system is in near-new condition and is available immediately. Detailed technical documentation with all components and specifications is available and will be provided upon request.

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input current: 16 A, type of input current: three-phase, volume flow: 6,000 m³/h, intake manifold diameter: 300 mm, total height: 2,000 mm, total length: 3,100 mm, total width: 900 mm, overall weight: 925 kg, compressed air connection: 6 bar, nominal flow rate: 5,100 m³/h, negative pressure: 2,700 Pa, Technical data: Suction nozzle diameter D = 300 mm Residual dust content < 0.1 mg/m³ H3 Filter area 28 m² Cleaning method: compressed air Volume flow 6000 m³/h Negative pressure 2500 Pa Sound pressure level 72 dB(A) Motor/fan 7.5 kW 400 V 50 Hz Operating mode: continuous operation Volume of chip collection container 3 x 165 l Weight approx. 1000 kg Dimensions (L x W x H in mm) 3070 x 900 x 1950 Scope of delivery: - Housing, pressure shock-resistant up to 200 mbar, - Chassis, - 3 filling containers for the SMU 6000.1, - Separator with filter, - Fan unit with discharge duct, - Compressed air or vibration cleaning, Hodpjyi Efcjfx Aqgefn - Control cabinet with main switch, motor starter and automatic start, - Integrated fire extinguishing system, - Automatic cleaning initiation and integrated filter monitoring with indicator light, - 5 m connection cable with 32 A CEE plug, - Device plug with phase inverter, including frequency inverter workshop tested

Condition: new, Year of construction: 2023, For sale: a new, unused SPANEX SHB RS 55–70 briquetting press, manufactured in 2023. The package includes a separate intermediate hopper designed to feed wood chips and dust from an extraction system into the press. The press was purchased for our own production facility but was never installed or commissioned. It is stored disassembled on pallets, as shown in the actual photographs. The intermediate hopper is a separate unit, approximately 1.5 × 1.5 m. Included in the sale: • SPANEX briquetting press • Hydraulic unit and control cabinet • Intermediate hopper Technical information: • Briquette diameter: Ø 70 mm • Published output for the SHB RS 55–70 series: 50–90 kg/h, depending on the material • Custom configuration with a more powerful motor than the standard series specification The actual output of this particular configuration has not been tested. The exact installed motor rating can be confirmed from its nameplate. The first gallery image is a concept visualization showing a possible installation beneath a dust extraction unit. The remaining images show the actual equipment offered for sale. The large dust extraction unit is not included. Hjdez Eqfcspfx Aqgofn Connections and installation will need to be adapted to the buyer’s system. The equipment is located in Latvia and can be inspected by appointment. We can assist with loading and transport arrangements.

Condition: defective spare-parts repository (used), functionality: unexamined, Due to warehouse clearance and clean-up, various machines are offered here as untested, defective, for refurbishment, or for parts. The machines are offered in their current condition at favorable prices. Please refrain from making unreasonable price offers. Briquetting press SPÄNEX COMAFER, defective Briquetting press Type: SH50 Capacity up to 50 kg/h (material-dependent) Density 0.8 - 0.9 kg/dm³ (material-dependent) Hfodpjz Efvpefx Aqgsn Briquet diameter approx. 50 mm Dimensions approx. 230cm x 140cm x 125 cm Feed hopper: diameter 120cm, height 93 cm Volume 1m³ Weight approx. 500 kg Can be installed under a dust extraction system The machine has been in my warehouse for some time. The machine is explicitly sold as defective, for spare parts, or for rebuilding by hobbyists, for export, etc. The machine is usually complete, but a functional test cannot be carried out. There are 2 identical machines in stock. The machines can also be purchased as a package. Condition: see pictures. (See pictures – a prior inspection is strongly recommended; simply leave your phone number by email, and I will contact you to arrange an inspection appointment. Subject to prior sale. All information is without guarantee. The machines can be picked up by the buyer or shipped via a freight forwarder at the buyer's expense. Loading or packaging can be organized by us. The shipping costs are an estimate; they may vary depending on the distance and unloading options; please inquire. The stated selling price is the net price plus VAT. An invoice with VAT will be issued. Warranty basis: due to age and wear, the sale is exclusively to business customers without any warranty, guarantee, or right of return. All information is without guarantee. The buyer acknowledges this by submitting their bid. If the offered item is a used item, the warranty is 12 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, any warranty is excluded. If the offered items are new, the warranty is 24 months if the buyer acts as a consumer within the meaning of §13 BGB. If the buyer acts as a business customer within the meaning of §14 BGB, the warranty is 12 months.

Condition: used, Year of construction: 2015, Complete extraction system, with briquetting press Consisting of: Chip container approx. 10 m³ Filter unit approx. 140 m² Fan, frequency-controlled, 15 kW Container discharge Briquetting press 60 to 90 kg/h Recirculation air components Control systems complete Pipe components complete for the system Spänex extraction system: completely disassembled, ready for transport from a public sector facility Components complete for the system Fire alarm Baffle silencer 1200 x 900 2 channel bends 90° 600 x 600 Transition 90° 600 x 600 to 1200 x 600 Transition outlet 550 / 320 x 350 Connection vent 320 x 350 / 1200 x 900 Perforated recirculation air pipes for air distribution D 630 mm: Hfodpfx Aqezy Sfisgjn 3 x 1500 mm 1 x 1400 mm 1 x 1300 mm 2 bends 450 mm 90 r=300 mm 3 bends 450 mm 90 tight r=200 mm 5 pipes 4450 mm 1.0 m 1 bend 560 mm 90° 2 pipes 560 mm 1.0 m in top condition low operating hours Manufacturer: Spänex extraction system / IPE press Year of manufacture: 2015 press, system 1996 GS-tested CE-type tested Afterfilter Suction/blowing nozzle mm: 400 Suction nozzle mm: collecting duct Casing Fire hose motorized shaking with discharge gear Air recirculation Number of filter hoses: 215 Filter hose length mm: 1050 Filter hose diameter mm: 200 Filter category: BIA-tested Cat G/C Fan kW: negative pressure, high-performance fan, frequency-controlled, 15 kW, 1996, 10670 m³/h at 2500 pa Fan diameter: 400 Fan Pa: 2500 Length mm: 4500 Width mm: 3000 Height mm: 3200 Briquetting press: used in top condition low operating hours Manufacturer: IPE Type: ECOpress 90/10 Year of manufacture: 2015 Machine no.: 016615 GS-tested CE-type tested Motor kW: 7.5 Press output kg/h approx. material-dependent: 60 - 90 Briquet diameter mm approx.: 60 Filling cylinder Screw feed Location 97447 Gerolzhofen, free loading, unpacked Handover in the current condition as inspected, without guarantee and warranty

Condition: used, Extraction unit 2500 m³ Spänex Hfjdpfx Aowzzdtsqgjn Price changes, errors, printing and typographical mistakes reserved.

Condition: used, Spänex SP 315 KC 3.1 radial fan for the efficient extraction of swarf, dust and light wood waste in woodworking workshops. The fan is ideally suited for use in extraction systems on individual machines or in small machine fleets, and ensures reliable air flow during continuous operation. Thanks to its robust industrial design, it is engineered for continuous use in workshops and production facilities. Hedszrypgopfx Aqgefn Technical data: - Air flow rate: approx. 6,400 m³/h - Motor power: 15 kW - Connection diameter: 320 mm