Wood chip dryer
SPE Renergi

Name: SPE Renergi Wood chip dryer
Brand: SPE Renergi
Price: 20000 EUR
Availability: InStock

Fixed price plus VAT

€20,000

Condition

Used

Location

Cēsis

Machine data

Machine type:: Wood chip dryer

Manufacturer:: SPE Renergi

Condition:: used

Price & Location

Fixed price plus VAT

€20,000

Location:: Valmieras iela 20A, LV4101 Cesis, LV

Call

Details about the offer

Listing ID:: A192-96676

Update:: 03.12.2025

Description

SPE Renergi Low Temperature Dryer.

The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels.
The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C.
Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur.
Power supply Data:
• Voltage 400 V AC, three phase
• Recommended fuses in supply line: maximum 3x630 A
• Typical power consumption: 200kW
The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet).
Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h.
Airflow: max 200 liter/min
Hjdpfxewp Rqfo Adzor
Air pressure: min 4,5 bar, recommended 6,0-8,0 bar
Water supply: hot water supply, with a flow of 32 dm3/s.
Water pressure: min 1.5 bar, max 6.0 bar
Operating temperature range:
• Incoming air temperature: -20°C to 50°C
• Relative humidity: 0% to 60%
Raw material/media:
• Relative humidity: 45% to 55% by wieght
• Requested relative humidity: 8% to 15% in the dried material
Capacity:
• The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load
• The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour.
SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of:
• The Machinery Directive 2006/42/EC
• LVD 2006/95/EC
• EMC 2004/108/EC

The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time.
The dryer is already dismantled
All electrical schematics, manual, operating instructions available
Upon request, we can provide a contact person with this type of working dryer for consultation
Price:20,000.00 EUR (VAT is not included)

Seller

Registered since: 2022

2 listings online

Call

Send inquiry

Telephone & Fax

+371 27 3... show

These listings may also fit your interest.

Listing

Draw Spinning System Oerlikon/Barmag SDM60

Germany

7,870 km

Draw Spinning System
Oerlikon/BarmagSDM60

Call

Year of construction: 2017, condition: ready for operation (used), A spinning, drawing and winding line for the production of monofilament yarns, multifilament FDY and POY is available. Spinning positions: 24, yarn ends: 192, drafting: cold and hot godets, package change: without yarn breakage, number of godets heated/cold: 50/50, number of winders: 24 (+2 reserve winders). Including various spare parts for the machine and electronics. Documentation available. On-site inspection is possible. Hedpfx Adjuanq Tjzer

See details

Listing

United Kingdom

7,158 km

Single shaft shredder
VecoplanVAZ2000

Call

Condition: excellent (used), Year of construction: 2023, operating hours: 500 h, functionality: fully functional, We brought this back in 2023 for a specific project that never came off so it is nearly new. We are looking to sell the shredder, WME infloor conveyor, and Helios fire system all together, new price was £440k for all 3. Our Presona LP100 cannot keep up with it but the most we have processed is 13 tons per hour, screened to 40mm secure paper destruction. It is still in place and runnning. Buyer to decommision and collect. This is also advertised elsewhere so we reserve the right to take it down at any time as trade sellers are also advertising and selling the machine Hedpfoxftitex Adzjr

See details

Listing

Twin-shaft shredder Hammel, Pronar, Olnova, Lindner, Arjes VB 750, MRW 2.85, U75, 75DK, VZ 750

Dębowica

8,454 km

Twin-shaft shredder
Hammel, Pronar, Olnova, Lindner, ArjesVB 750, MRW 2.85, U75, 75DK, VZ 750

Call

Condition: new, We would like to offer shafts specifically designed for medium-sized shredders equipped with side combs, a breaking bar, and a cassette system. Suitable for models: LINDNER U75, ARJES VZ750, HAMMEL VB750OL, NOVA 75DK - 5-7-7 - 6-7-7 - 8-7-7 - 10-7-7 MRW 2.85: - 5-8-8 - 6-8-8 - 8-8-8 - 10-8-8 Hedex Hhwdepfx Adzor PROTECHNIKA is a company with a 21-year history, specializing from its inception in the manufacturing of spare parts and complete recycling systems. In recent years, we have expanded our product range to include grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technologies, we have successfully reduced production lead times while maintaining consistently high quality standards. Grinding shafts are a serial product, which also allows us to collaborate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? The answer is simple: - Certified 3.1 materials - TUV SUD Rheinland quality assurance - ISO 9001 certification - Automated welding processes / ISO 15613 / ISO 15614 - Welders certified to ISO 9606-1 - ISO 9001:2015 - ISO 14001 - Independent design department able to fulfil any customer-specific requirements - In-house Research and Development Centre Building long-term customer relationships is our top priority, as your satisfaction is our success!

See details

Listing

Powder Coating Equipment,OVEN ROMER Kompleksowe lakiernie proszkowe

Skarżysko-Kamienna

8,438 km

Powder Coating Equipment,OVEN
ROMERKompleksowe lakiernie proszkowe

€200,000

ONO plus VAT

Call

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Hjdpfx Adofz U S Eszor Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

See details

Listing

Slitting line Paxson 72″ x .187″ x 50000Lb

United States

0 km

Slitting line
Paxson72″ x .187″ x 50000Lb

Call

Condition: used, 72″ x .187″ x 50,000Lb Paxson Loop Slitting Line Make: Paxson Material Width: 12″ – 72″ (Uncoiler 60″) Material Width: .010″ – .187″ Coil Weight: 50,000Lb Hodpfjihf Ufex Adzor Coil ID: 20″ – 24″ Coil OD: 72″ Speed: 500 /1000 fpm Direction: Right to Left Material Strength: 40,000 yield / 50,000 psi shear Material: CR, HR, Galvanized Entry Transfer Cart Entry Coil Car Mandrel Uncoiler Powered Hold-Down Roll Powered Expansion Sliding Base Hydraulic Peeling Table Driven Pinch Rolls

See details

Listing

CNC BIESSE BREMA EKO 902 INSERT SECOND HAND BIESSE EKO 902 INSERT

Íscar

7,490 km

CNC BIESSE BREMA EKO 902 INSERT SECOND HAND
BIESSEEKO 902 INSERT

€43,000

Fixed price plus VAT

Call

Year of construction: 2010, condition: good (used), USED CNC BIESSE BREMA EKO 902 INSERTING MACHINE TECHNICAL DETAILS: 3-AXIS (X-Y-Z) CNC MACHINING CENTER Hsdpfx Adohknbrjzor - Complete protection of the machining head and the work area on the machine. - Numerical control system with BIESSE Works software on Windows. - Vertical positioning of the panels, with 2 panel clamping jaws. - Panel feed (in the direction of the X-axis, on the lower support with rubber wheels), movement (in the X-axis) of the panel/board clamping jaws. PANEL DIMENSIONS (WORKING DIMENSIONS): - Minimum length: 160 mm / Maximum length: 3200 mm - Minimum width: 35 mm / Maximum width: 900 mm - Minimum thickness: 8 mm / Maximum thickness: 80 mm WORKING GROUPS: - No. 1 Vertical spindle (electro-spindle) ER32 (4.5 kW) with inverter (up to 18000 RPM) - No. 1 Circular saw (for grooves) diameter 120 mm (X-axis fixed) - No. 13 Independent vertical spindles for drilling (6 on the X-axis + 7 on the Y-axis) - No. 8 Independent horizontal spindles for drilling (3+3 on the X-axis and 1+1 on the Y-axis) - No. 1 Head group for hinge drilling - Total installed power: 20 kW AUTOMATIC DOWEL INSERTING GROUP ON BOTH SIDES WITH A PRESSURE PUMP FOR APPLYING THE GLUE.

See details

Listing

Panel saw with automatic feed Martin T 70 / 11kW

Wiefelstede

7,607 km

Panel saw with automatic feed
MartinT 70 / 11kW

€3,700

Fixed price plus VAT

Call

Year of construction: 1979, condition: good (used), Underfloor circular saw, crosscut saw, pull saw, miter saw, panel saw, table saw, aluminum circular saw, panel saw Hodshfufgopfx Adzjr -Manufacturer: Martin, panel saw type T 70 with automatic feed -Engine power: 11 kW -Speed: 1445 rpm -Saw blade: Ø 410 x 5 mm -max. Cutting height: 90° 140 mm / 45° 110 mm -Miter cut: up to 45° -Sliding table: 355 x 1500 mm -Dimensions total 2275/2010/H1400 mm -Weight: 1058 kg

See details

Listing

Bollegraaf HBC80K (45kW) Bollegraaf HBC80 (45kW)

Siddeburen

7,538 km

Bollegraaf HBC80K (45kW)
BollegraafHBC80 (45kW)

Call

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: W230-028, pressing force: 80 t, warranty duration: 24 months, pressure: 250 bar, power: 45 kW (61.18 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler. This is a baler HBC80 (45kW) with crosswires. At the time of writing this baler is being completely refurbished in our refurbishment workshop. This refurbishment takes place on the basis of the very strict Bollegraaf OEM Refurbishment Guidelines. Hsdpfx Aetvat Tedzsr After refurbishment, this baler is sold with a 2-year warranty.

See details

Listing

XH 1250 wood pallet chipper wood chipper XH 1250

Karsin

8,083 km

XH 1250 wood pallet chipper
wood chipperXH 1250

€39,000

Fixed price plus VAT

Call

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Hjdpfxsqmi Irj Adzjr Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.

See details

Listing