Telescopic single-girder crane runway

Stahl / Ralf Brinkmann GmbH ST 1005-8/2

The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased.

Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs.

Technical data:
Load capacity: max. 500 kg
Runway type: IPE runway beam
Runway length (fixed): 12,000 mm
Runway length (movable): approx. 9,595 m
of which 4,615 mm (extending from the building)
System consisting of:
12.00 m IPE runway beam
for attachment to the existing concrete ceiling
(2 pieces of 6,000 mm each with
connecting elements)
- Mounting plate on top -
9.59 m IPE runway beam,
for movement on the "ceiling rail".
intended for attachment via the following
travel units. Additionally, it has two counter-pressure rollers,
at the rear. Eyelet for attaching
the hand trolley to be able to retract the telescopic rail, at the rear end
of the telescopic rail.
2x hand travel unit for manual
movement of the telescopic rail
4x set of end stops (stoppers)
designed as bolted angles
2x C-rail system /
cable management system
for supplying power to the electric chain hoist /
electric travel unit
(no ideal control!)
1x hand trolley,
for retracting the telescopic rail.
1x
STAHL Crane Systems electric chain hoist ST 1005-8/2
1/1
Manufactured according to the rules of the EC
Machine Directive,
Device Safety Act, and BGV.
Lifting mechanism operating mode according to DIN EN 13001-2: HD1
Motor classification (FEM/ISO): M4
Load-bearing component classification (FEM/ISO): M5
Protection type EN 60529: IP55
Designed for operation in an indoor environment,
ambient temperature -20 to +40°C
Lifting mechanism load capacity 500 kg
Lifting height 8.00 m
Lifting speed 2.00 / 8.00
m/min
Power (nominal) 0.20 / 0.80
kW
Design data, see product information / motor data sheet
Lsdpfx Amozn H Tws Uerp
Duty cycle 20 / 40 %
Load chain galvanized
Travel unit electric travel unit, short
overall height
Travel speed 5.0 / 20.0
m/min
Power 0.07 / 0.32
kW
Duty cycle 20 / 40 %
Flange width 200 mm
Electrical system
Contactor control
Operating voltage 400 V
Control voltage 48 V
System frequency 50 Hz
Control unit STH incl.
6.80 m control cable
Paint finish Hoist - Topcoat polyurethane 80 µm
Topcoat lifting mechanism in RAL 7021 color,
black gray
Topcoat control box and fan cover in color
RAL 6018, yellow-green
Note: Overload protection and emergency lowering by
slip clutch
(must not be operated under normal conditions)
Equipment
- Travel switch on both sides
- Lifting end switch for upper hook position
- Guide for cable-mounted power supply, 505 mm
- Radio remote control with emergency control unit STH
(transmitter Quadrix, receiver FSE308 with integrated
horn (91 dB) and signal light, charger, replacement
battery, belt clip, adhesive symbols)
Documentation:
- Installation declaration according to Directive
2006/42/EC for machinery
- Test book
- Load capacity labeling according to UVV standards
- Operating manual for cranes

Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

The listing was translated automatically. Translation errors are possible.