Eddy Current Separator

Steinert NE 100 230 E 5013

Condition: good (used), Functionality: fully functional, “3 Pcs. Steinert NE/NES 150 220 E 5009” for Sale Manufacturer: Steinert Type: NE/NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) Nelju S Sbyjhcdw Nocp With new of good used Control-unit 1Pc. Under-carriage with a height of 2.300mm. in stock . Overhauled, sandblasted and painted.

Condition: ready for operation (used), ISS 100 with vibrating chute and control cabinet more photos to follow the sorting machine will be handed over in working order sorting tests in manual feeding method can be carried out Ncslhcdjv Duv Nsw Nsp

Condition: ready for operation (used), Steinert StNE 125 functional with vibrating chute and control cabinet Video can be sent Magnetic fields tested Njlhcdwov Dutho Njcp

Condition: good (used), Functionality: fully functional, total length: 2,300 mm, total width: 400 mm, Length 130/100 cm Nelhcjvzt Ilsdw Njcp Width 40 cm

Condition: used, mileage: 9,808 km, power: 80 kW (108.77 HP), fuel type: electric, gearing type: automatic, axle configuration: 4x2, wheelbase: 2,720 mm, first registration: 01/2021, color: grey, number of seats: 2, Year of construction: 2021, Equipment: ABS, air conditioning, airbag, cruise control, electronic stability program (ESP), fog lights, immobilizer system, navigation system, power assisted steering, seat heater, sliding door, = More options and accessories = - Air conditioning - Right side sliding door - Automatic dipped beam - Heated exterior mirrors - Passenger airbag - Bluetooth car kit - Electric front windows - Electrically adjustable exterior mirrors - Electronic brake force distribution - Driver airbag - Height-adjustable steering wheel - Keyless entry - Keyless start - Steering wheel heating - Metallic paint - Multifunctional steering wheel Nolhcjvf Edtedw Nocp - Multimedia capable - Fog lights - Radio - Radio with DAB - Rain sensor - Tire pressure monitoring - Reversing camera - Seat heating - Start interrupter - Intermediate partition = More information = General information Number of doors: 4 Model range: March 2018 - Dec. 2022 Cabin: simple Technical information Torque: 254 Nm Drivetrain Area of use: 200 km Gearbox Gearbox: 1 gear, Automatic Performance Acceleration (0-100): 14.0 s Top speed: 123 km/h Dimensions Length/Height: L1H1 Dimensions (L x W x H): 456 x 176 x 185 cm Weights Empty weight: 1,473 kg Payload: 782 kg GVW: 2,255 kg Max. towing load: 450 kg (unbraked 450 kg) Battery Existing battery: Purchased Battery: 40 kWh Battery charging: Type 1 Battery fast charging: CHAdeMO Interior Interior: black Environment CO₂ emissions: 0 g/km Maintenance, history and condition Booklets: Available APK (technical main inspection): checked until 02.2027 Number of keys: 2 (2 handheld transmitter)

Condition: new, Year of construction: 2025, Functionality: fully functional, overall weight: 2,600 kg, color: white, total length: 1,400 mm, total width: 1,300 mm, total height: 2,225 mm, The EnergyCore EC-100&230 energy storage (100 kW, 230 kWh) is an all-in-one solution ideal for industry, RES farms and data centers. It offers high efficiency, safety and reliable energy management with an advanced Production plants Thanks to its ability to respond quickly to fluctuations in energy demand, production plants can avoid costly downtime. It increases power reliability and enables more efficient use of renewable energy. Industrial companies The EnergyCore EC-100&215 energy storage supports the stability of the power supply in large industrial plants, reduces energy costs during peak periods and increases operational efficiency. Ideal for managing excess energy and supporting production processes. Data centers Provides reliable power supply during power outages, which is critical for the continuity of data center operations. The energy storage acts as a support for the UPS and offers additional protection against failures and power stability under high loads. Ncslhsvuhuascdw Njp Photovoltaic and wind power systems The EnergyCore EC-100&215 enables the efficient storage of excess energy generated by renewable sources such as photovoltaic and wind power systems. It maximizes self-consumption, minimizes energy losses and promotes sustainable resource management. INNOVATIVE APPROACH Mobile app for Proton energy storage Modern Proton energy storage - maximum efficiency and long service life Energy storage from Proton is based on the innovative LiFePO4 technology, which enables high current efficiency and an extremely long service life with several thousand charge and discharge cycles. LiFePO4 batteries have a high energy density, so that large amounts of energy can be stored in the smallest of spaces. In addition, these cells have a low self-discharge rate and are immune to the "memory effect" that occurs with older battery types such as Ni-Cd, Ni-MH or AGM We have been in business since 2007 (over 17 years) Under what conditions can our energy storage units be operated? Single-family homes Restaurants Hotels Office spaces Farms Server rooms Public facilities Production facilities Universities and technical colleges Anywhere where constant access to electricity is required - The customer service office is available on weekdays from 8 a.m. to 4 p.m. - The service department is available 24 hours a day (24/5) for our customers. If you have any questions or problems that require a quick response, the best way to contact us is by phone.

Condition: ready for operation (used), Year of construction: 2010, Main Drive Pressing force 100 t Bending length 3100 mm This Safan SAFAN E-BRAKE 100-3100 press brake was manufactured in 2010. Consider the opportunity to buy this Safan SAFAN E-BRAKE 100-3100 press brake. Contact us for more information. Application Types Ncolhcev Nb Ebodw Njp Other Sheet Metal Machinery

Condition: ready for operation (used), Siemens 6AV9070-1AC00 Operating channel extension VS 100 E Stand A01 in opened OVP used 100% functional Njlhcdji Edhqsw Njcp

Condition: excellent (used), Year of construction: 2009, operating hours: 36,000 h, clamping force: 1,000 kN, screw diameter: 40 mm, injection pressure: 2,000 bar, injection weight: 198 g, Engel E-max 440-100 (216) General information Product Code: 216 Availability: In Stock Year of production: 2009 Brand: Engel Technical data Shot Weight: 198 g Clamping Force: 1,000 kN Condition: Used Screw dia: 40 mm Injection pressure: 2000 bar Tie bar distance: 410 x 460 mm Platen size: 650 x 600 mm Mould height min.: 150 mm Type of controls: LC 200 Language: English,Swedish Power: 18 kW Workinghours: 36000 h Weight: 4400 kg Dimensions: 4,7 x 1,3 m Hopper: No Ncolovuptkohcdw Nop Euromap: Yes Air valve: Yes

Condition: like new (used), Year of construction: 2008, operating hours: 56,000 h, Functionality: fully functional, machine/vehicle number: 170722, screw diameter: 25 mm, Technical data Manufacturer Engel Type e-max 310/100 Serial number 170722 Year of construction 2008 Operating hours approx. 56034 and approx. 58,000 Dimensions L/W/H 4.7 x 1.2 x 1.9 mtr. Weight 4400 kg Fully functional Condition very well maintained Special Control unit cc 200 Auger ⌀ 25 mm Injection weight 55 gr. Injection pressure 2400 Injection volume 59 ccm Ncelhcst U Agmodw Nop Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm Mold mounting height 150 - 450 mm Opening stroke 350 mm Ejector stroke/force 100 mm /24 kN Hydraulic clamping unit Motor power 16 kW Heating capacity 9.2 KW /4 zones Total output 25.2 KW The machine is available from September in our warehouse in Hanover/Germany and has been tested. Extras core pull full-electric drive Tool heating 12 ejector plate safety device German and English screen language incl. complete documentation guarantee Warranty until first commissioning Loading/shipping Free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover/Germany

Condition: used, Year of construction: 1981, grinding diameter max. 100 mm grinding length 180 mm grinding wheel diameter 400 mm grinding wheel width 180 mm Njlhcjvdt S Nodw Nocp In our opinion, the machine is in good used condition and can be viewed under power by appointment. There are 4 identical machines available. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: used, Functionality: fully functional, mileage: 355,000 km, power: 105 kW (142.76 HP), first registration: 12/1995, fuel type: diesel, color: white, next inspection (TÜV): 03/2026, wheelbase: 3,690 mm, emission class: euro2, loading space length: 4,200 mm, Year of construction: 1995, Equipment: ABS, air conditioning, crane, Used truck IVECO EUROCARGO 100 E 15 tipper 3 sides + crane behind the cabin, crane type PM 8024 with hydraulic extensions, body length 4,200 mm, wheelbase 3,690 mm, total length of the truck 6,600 mm, manual transmission 6 gears, total weight 10,000 kg, payload 4,200 kg, mechanical suspension leaf spring, differential lock, air conditioning, ABS, electric mirrors + windows, radio, 355,000 km, good condition. INFO ENG: Used truck IVECO EUROCARGO 100 E 15 3-sided tipper + crane behind the cabin, PM 8024 crane with hydraulic extensions, body length 4,200 mm, wheelbase 3,690 mm, total length of the truck 6,600 mm, 6-speed manual gearbox, total weight 10,000 kg, payload 4,200 kg, mechanical leaf spring suspension, differential lock, air conditioning, ABS, electric mirrors + windows, radio, 355,000 km, good condition. Nolhcdwov Tdhge Necp

Condition: reconditioned (used), Functionality: fully functional, warranty duration: 6 months, DGUV certified until: 03/2026, year of last overhaul: 2025, Planetary mixer mixer Model: Rego PM 100 E Power adjustment - stepless LED control with timer 1 stainless steel bowl 100 liters 1 broom, 1 flat stirrer Electric bowl lift Stand machine Nolerhvuijhcdw Nscp Connection 400V, 5.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty + service Option: additional bowl Maintenance contract Instructions & commissioning Other bakery machines in stock!

Condition: used, Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B; You are buying an industrial sewing machine from Brother Brother Exedra E-100 Mark II sewing machine, Foot Lifter FB II, MD-816B, DB2-B737-413 380V Nelhcou Nyulodw Nocp

Condition: excellent (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, clamping force: 100 kN, screw diameter: 25 mm, displacement volume: 59 cm³, injection pressure: 20 bar, mold height (min.): 250 mm, ejector force: 25 N, ejector stroke: 100 mm, overall weight: 3,900 kg, Hello dear customers, We have great cleanroom machines in our program again. Here we offer this Engel e Max cleanroom machine from 2008. This machine is equipped with a GEKU SR 500 ST linear robot. The machine has run almost 58,000 pump hours in automatic mode. The machine comes from a well-known manufacturer in the pharmaceutical industry, so the machine, including handling, was subject to very strict maintenance management and is in the very best condition for its age. There is hardly any damage to the paintwork. I would be happy to send you further information and make you an offer. I look forward to your inquiry. With sunny greetings Nick Schönfeld Ncslhot A Ufwecdw Nop

Condition: used, Electric dual screwdriving unit with automatic feed and pneumatic double stroke mounted on handling device, handling system, manipulator for screwdriving technology Screwdriving unit: BÖLLHOFF / BOSCH REXROTH type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E double screwdriving unit has a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are also fitted for complete automation. Screwdriver 1 consists of the following components: Rexroth type servomotor Rexroth type planetary gearbox Rexroth type encoder Rexroth type straight drive Screwdriver 2 consists of the following components: Rexroth type servo motor Rexroth type planetary gear Rexroth type Transducer Nelhcdwjfx Hyfj Nocp Rexroth type Offset output Dimensions WxHxD: 165 x 1000 x 200 mm Pneumatic long stroke: 30 mm Pneumatic short stroke: 20 mm Screwdriver spring stroke: 20 mm Screws last used: M6 x 15 mm Rexroth electric screwdriver unit Rexroth servo motor Type: EC302 SZ3 Material number: Torque: 0.6 Nm/A Peak torque: 0.7 Nm Speed: max. 20000 rpm Current consumption: max. 7 A Weight: 0.8 kg Rexroth gear unit Type: 3GE27 SZ3 Material no: Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Transducer Rexroth Type: 2DMC012 SZ2 Material no: Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm Offset output Rexroth Type: 2VNA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.6 kg Installation length: 153 mm Handling system: JÄGER HANDLING Type: Handy-flex 300 Horizontal movement: 400 mm Vertical movement: 450 mm Load capacity: max. 14 kg Handyflex outreach: 250 to 650 mm Outreach Handyflex swung out: max. 860 mm Rotation radius at full extension: max. 360° Vertical guide column: Ø 30 mm Horizontal guide pillars: Ø 20 mm - Balancer for vertical movement - Adjustable load capacity - Adjustable stop for radius limitation Dimensions L x W x H: approx. 1150 x 650 x 1400 mm total weight: approx. 90 kg good condition Blue steel base plate is not included in the scope of delivery.

Condition: like new (used), Year of construction: 2008, operating hours: 58,000 h, Functionality: fully functional, super well-maintained injection molding machine from clean room (pharmaceutical production) - fully functional with functional guarantee - with GEKU SR 500 ST. linear robot - perfect optical condition Technical data Manufacturer Engel Type e-max 200/100 serial number 170609 Year of construction 2008 Operating hours 58774 h approx. Dimensions L/W/H 4.0 x 1.3 x 1.9 mtr. Weight 3,900 kg Fully functional Condition excellent Clean room Special Control unit CC200 Screw ⌀ 25 mm Injection weight 55 gr./hp Injection pressure 2400 bar Injection volume 59 ccm Clamping force 1000 kN / 100 to. Distance between tie bars 460 x 410 Clamping platens 650 x 600 mm mold mounting height 150-450 mm max distance between platens 800 mm Opening stroke 350 mm Ejector stroke / force 100 mm / 25 kN Clamping unit electric Connected load: 45 KW Rated current: 69 A The machine is immediately available in our warehouse in Hanover/Germany and has been tested. Extras GEKU Robot SR 500 ST Simotion control X-axis: 600 mm Y-axis: 1400 mm vertical Z-axis: 2500 mm horizontal A-folding axis: SWM 45 C-axis : Servo Gripper: SWS16 B-axis: not available Guarantee Warranty until first commissioning Loading/shipping FCA-free loading on the buyer's truck or free delivery against freight reimbursement from our warehouse in Hanover /Germany Financing Ncslhcdweubamve Nop On request - installment plan option Price: On request

Condition: new, Year of construction: 2024, UNIBOHRFIX 100 E Fully automatic drilling machine, measuring length 6000mm (2-axis NC drilling machine) Item No. 6019 With the fully automatic drilling machine UniBohrFix 100, your material is positioned on the X-axis at the desired position, clamped and drilled. All you have to do is press the start button. Round tubes, rectangular tubes and angle profiles, as well as flat and solid materials, can be conveniently pneumatically clamped in the horizontal gripper of the positioning system. After simply entering the X and Y values ​​or calling up a program that has already been written, the machine works completely independently. Advantages • A sequence of holes is automatically executed at precise intervals. • Potential operator errors are drastically reduced. • Programming takes just a few minutes. • Very good value for money. • Significant reduction in labor force Fully automatic execution Measuring length: 6,000 mm Total length: 13,500mm NC 2-axis control incl. LAN interface for data transmission Pneumatic vice (span 200 mm) Alternatively also available with 300 mm. Minimum quantity spray unit with holder and spray nozzle Drill: Unimax 3T AV Alternatively also with Unimax 4 Basic (For technical data see data sheet) anti-rotation device tapping device motorized height adjustment NC positioning system PD 200p Feed force 200 kg Positioning according to absolute and incremental dimensions possible Carriage with DC servo motor and encoder Trolley with 12 ball bearings Pneumatic stop clamping with high holding power Steel guide rail with precision toothed rack Steel carrier profile as dirt protection Ncslhcdwsfu Irze Nop Infeed and outfeed material roller conveyor RD-200/4 Length: 6,000 mm / 7,000 mm / load capacity 200 kg/m / rollers adjustable in height / Mounting bracket / roll width 407 mm / insert plates / struts Roller diameter 50 mm / steel rollers It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

Condition: used, Contour measuring device, contour measuring device, contourograph, contourograph, roughness measuring device, roughness measurement, roundness measurement -Manufacturer: Hommel, probe for roughness measuring device -Probe: Type P2FE 30 / P2F E 100 Ncslek Hdr Tehcdw Nop -Individual components: see photos -Dimensions box: 235/105/H30 mm -Weight.: 0.4 kg

Condition: used, Electric dual screwdriver unit with automatic feed and pneumatic double stroke BÖLLHOFF type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual screwdriving unit has a pneumatic double stroke via Festo valves and cylinders. Various monitoring systems are also fitted for complete automation. Technical data: Torque electric screwdriver: 0.6 Nm Gearbox torque: max. 10 Nm Speed: max. 20000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Ncjlhcdwjhxvu Ee Nop Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Total pneumatic stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - A Bosch Rexroth LT303 power module is required to operate the screwdriver. (power module not included in the scope of delivery) Screwdriver 1 and 2 each consist of the following components: Rexroth type servomotor Rexroth type planetary gearbox Rexroth type encoder Rexroth type Linear drive Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Rexroth gear unit Type: 3GE27 SZ3 Material no: Efficiency: 90% Reduction ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Transducer Rexroth Type: 2DMC012 SZ2 Material no: Nominal torque: 12 Nm Reduction ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Rexroth straight drive Type: 2GA82 SZ2 1/4 "SQ Material no: Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Reduction ratio: 1 Weight: 0.2 kg Installation length: 90 mm A 7 m motor connection cable is included in the scope of delivery. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition

Condition: used, Electric chain hoist, electric hoist, crane DEMAG type DKUN 1-100 K V1 F4 make no.61801899 year of construction 1997 lifting capacity 100kg hook path 3 meters Main hoisting speed 8 m/min. Fine lifting speed 2 m/min. Ncslohtr Eyjhcdw Njp chain size 3,6 x 10,6 mm cable length control bottle approx. 1,7 meter Mains connection: 400 Volt, 50 Hz 1 load strand = 100 kg own weight 16,5 kg good condition

Condition: new, The KHS is the classic manual plate shears. And something like this should not be missing in any locksmith's shop, in order to separate something with a lot of momentum from time to time. The cast frame, stop and blade are so robust and solid that several generations can work with them. Ncjlhcen D Ehvsdw Njp

Condition: good (used), suction capacity: 1,000 m³/h, negative pressure: 15,000 Pa, Nederman E-PAK compact unit for universal use. Ideal for dust extraction from grinding and polishing processes and welding fumes. It is also suitable for vacuuming workplaces and workshops. Typical application areas include welding shops, automotive workshops, the construction industry, bakeries, dry cleaners, etc. The working environment requires low noise levels, which the E-PAK provides, thanks to its compact design and sound-absorbing housing. Parameters: Flow rate: 1000 m³/h at -15 kPa (15000 Pa) Nslhettlbvscdw Nscp Max. vacuum: -20 kPa (20000 Pa) The vacuum unit with a silenced, direct-driven side channel blower is mounted on a steel profile frame as a unit with a filtration system, a control unit with a control panel Dust container 70 l. Power: 13kW Built-in Siemens MIDIMASTER Vector frequency inverter Sound level: max. 70 dB(A) Separation by filter category M >99.9% 160 mm inlet Weight about 400 kg

Condition: new, The machines of the Turnado PRO series are the modern version of the classic lathe. The PRO models are the latest generation of our universal lathes, which have been tried and tested for 20 years. With constant cutting speed, rapid traverses and an extended speed range that can be controlled by an inverter, these models are characterized by high-performance machining, excellent surface quality and time efficiency. They are easy to recognize by the new ergonomic cladding design, which integrates all functions into an overall concept. Ncslhcengzzksdw Nop

Condition: new, The machines of the Turnado series are the modern version of the classic lathe. They are characterized by robust construction, a powerful motor and high level of versatility. With the extensive range of standard accessories and options, these machines can be adapted to many production requirements. A modern position indicator is also part of the standard equipment, as is a high-quality quick-change toolholder system. The models in this series have proven themselves many times and have been one of our best-selling conventional lathes for more than 20 years. Ncolhcdwjuy Ic Ee Nsp