SURFACE GRINDING MACHINE

SURFACE GRINDING MACHINE FSG-1640 AD

Year of construction: 1969, condition: ready for operation (used), Max. grinding depth: 80mm, distance spindle table: 145mm, spindle bore: 28mm, connected load: 7kW, length: 2100mm, width: 1400mm, height: 950mm, weight: 1.6t, with documentation, an inspection is possible. Iedpeqzkdmofx Agqja

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Isdpfx Agswdihreqja

Condition: used, TECHNICAL DETAILS - Grinding diameter : 3 / 80 [mm] - Grinding depth : 80 [mm] Ijdpfx Ageuhbmkoqoa - Max. part length : 250 [mm] - Max. part diameter : 240 [mm] - Centers height : 130 [mm] - Part-holder headstock swiveling : -5 / +60 [°] - Bar clearance : 25 [mm] - Metric shaft nose internal taper : 40 - Part-holder spindle speed with continuous adjustment : 350 / 1.200 [Rpm] - Strokes X/Z : 50 / 300 [mm] - Installed power : 17 [kW] - Dimensions (LxDxH) : 200 x 180 x 160 [cm] - Machine weight : 2.200 [kg] EQUIPMENT - Automatic downfeed - 1 VOUMARD M45DR internal spindle : 45.000 [Rpm] - Automatic parts loader - Hydraulic wheel dresser - 3 jaws chuck - Coolant tank * with coolant through part center

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm Ijdpfx Agot Hw Sheqja work piece width 1350 mm total power requirement 65 kW weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1999, cutting width 66 cm feeding depth 66 cm feeding high max. 8 cm Ijdpfx Agexmaipsqea

Condition: good (used), Year of construction: 2005, operating hours: 59,000 h, functionality: fully functional, travel distance X-axis: 780 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 560 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 50 m/min, nominal power (apparent): 61 kVA, controller manufacturer: Heidenhain, controller model: iTNC530, workpiece weight (max.): 4,000 kg, total height: 2,800 mm, total length: 6,000 mm, total width: 6,000 mm, table width: 500 mm, table length: 630 mm, table load: 4,000 kg, overall weight: 12,000 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, operating hours of spindle: 19,500 h, number of slots in tool magazine: 120, input voltage: 400 V, Equipment: chip conveyor, rotational speed infinitely variable, DMG DMC 60T RS3 with Heidenhain iTNC 530 with no maintenance backlog in good condition Ideal machine for unmanned machining, geometrically within new machine tolerance. Machine can be measured/checked on site. Machine data: Machine name: Machining center with pallet storage Manufacturer: DMG MORI Model: DMC 60T RS3 Year of manufacture: 2005 Condition: Very good Equipment: Direct path measurement in X/Y/Z (glass scales) Chip conveyor IKZ system 40 bar Extraction NC rotary table Tool magazine 120 places Heidenhain measuring probe Rotating viewing window IKZ 40 bar Signal lamp Chip flushing Operating mode 4 Technical data Number of axes 5-axis Ijdpfx Aerxrklegqsa Control Heidenhain iTNC530 NC rotary table clamping surface 500mmx630mm Weight approx. 9,000 kg Chip conveyor Yes Coolant device Yes Internal coolant supply Yes Travel paths and axes X-axis 780mm Y-axis 560mm Z-axis 560mm C-axis 360° B-axis -90°/+12° Feed rate and rapid traverse X-axis 50m/min Y-axis 50m/min Z-axis 50m/min B-axis - C-axis 30m/min Motor spindle Speed max. 18,000 rpm HSK A63 mount Tool changer Automatic tool changer Yes Number of magazine positions 120 Pallet changer 5 pallets

Year of construction: 1987, condition: ready for operation (used), Sanding length: 700mm, sanding width: 330mm, max. workpiece height: 450mm, table dimensions X/Y: 280mm/600mm, table speed: 25m/min, sanding wheel dimensions: 305mm/25mm/76.2mm, spindle power: 3PS, machine dimensions X/Y/Z: approx. 2100mm/1600mm/2000mm, weight: approx. 2000kg. Documentation available. On-site inspection is possible. Iedju Nllvjpfx Agqsa

Condition: new, functionality: fully functional, IG 482 SD Specifications Motors Grinding Spindle Motor 50HP, 200 - 1180RPM Rotary Table Motor 3HP, 5 - 70RPM Servo Column Motor 5KW Coolant Pump 3/4HP, 45GPM Table Diameter 48" Table Features Thru-spindle vacuum/pressure feed Variable strength 3/4" fine pole electromagnetic chuck Contact a DCM Technical Specialist for custom table & fixturing options Capacity Max Swing Diameter 52" Max Part Height 12" with grinding segments retracted 10-1/2" with a 2A2T wheel Grinding Wheel Options 2A2T Suberabrasive or Conventional Segments 26" diameter Cortland Style Hub & Segment 26" diameter Ask a DCM Technical Specialist about our wide variety of available abrasives Feed System Servo driven Z-axis with precision ballscrew and encoder Feedrate variable from 0.0006 IPM to 0.1000 IPM Servo drive X-axis for precision positioning Electrical Requirements 460V, 50/60Hz, 3 phase Consult DCM Technical Specialist regarding operation on other voltages Dimensions 137" wide, 82" deep, 88" high Weight Machine & Swarf System: 14,500lbs. (estimated) Electrical Box: 1,500lbs. (estimated) IG 482 SD FEATURES • 48” variable speed electromagnetic chuck with auto demag cycle • 50HP grinding spindle motor • Integral coolant filtration & mist collection systems • Easy to operate touchscreen controls • Mitsubishi FX5U PLC Ijdpjubbqijfx Agqja • 3 Grinding Modes - Conventional, Incremental and Grind to Height • Regrind feature allows re-running previous grind sequence without reprogramming • Continuous grind – the machine can automatically cycle through grind 1, 2 & 3 • Servo-driven precision control of both Z and X-axis with absolute home positioning • The cross slide X-axis moves with manual pulse generator • Backlash compensation on both axes • Password protection & operator lockout features • SECS/GEM Interfaced to work with 3rd party Scada type software • Password protection and operator lock-out features • Automatic routine maintenance reminders • 120" x 82" Footprint

Condition: used, Year of construction: 2011, Machine number 8161027 Built in 2011 Max. paper length 12 cm Max. paper width 78 cm Air table Yes Side table left Yes Side table right Yes Photo cells Yes Length x width x height 2000.0 × 2280.0 × 1700.0 Iodpoxx Tu Ajfx Agqoa Weight 1300 kg

Condition: excellent (used), IDEAL 7228-90 EC3 Cutting length: 720 mm - Cutting height: 80 mm - Table depth: 720 mm - Narrow cut: 20/90 mm - Power supply: 400 V/50 Hz/3~* 73 dB(A) - With side tables 210 cm x 160 cm - Clamping pressure: 650 daN / 1500 daN - Weight without side tables: 582 kg - Weight with side tables: 589 kg Iedpjxqrtnefx Agqsa